Search NASA⌕ Search

SEARCH · Search NASA

Results for “Vertical temperature structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

The atmosphere of Neptune - An analysis of radio occultation data acquired with Voyager 2

The vertical structure of Neptune's atmosphere is studied on the basis of recordings of the tracking signals received from Voyager 2 during its occultation by Neptune. The measurements began at a planetographic latitude of 62 deg north and ended near 45 deg south, and cover an altitude interval of about 5000 km. The 1-bar isobaric surface has equatorial and polar radii of 24,766 +/-15 km and 24,342 +/-30 km, respectively, and a corresponding oblateness of 0.0171 +/-0.0014. At this pressure, the temperature was 72 +/-2 K. The tropopause was detected approximately 40 km above the 1-bar level at a pressure of about 100 mbar. A comparison with IR observations indicates that the gas at the tropopause consists of 78-84-percent hydrogen by number density with the rest being mostly helium. The temperature in this region was 52 +/-2 K.

Lindal, Gunnar F.↗

A Cloud-Resolving Simulation of Hurricane Bob (1991): Storm Structure and Eyewall Buoyancy

A numerical simulation of Hurricane Bob (1991) is conducted using the Penn State University-National Center for Atmospheric Research mesoscale model MM5 with a horizontal grid spacing of 1.3 Km on the finest nested mesh The model produces a realistic hurricane that intensifies slowly during the period of fine-scale simulation. Time-averaged results reveal the effects of storm motion. vertical shear, beta gyres and deformation forcing on the structure of radial inflow, vertical motion, and precipitation. Instantaneous model fields show that radial inflow in the eyewall is very intense near the surface but transitions to strong low-level outflow near the top of the boundary layer. The low-level structure is modulated by a wavenumber 2 disturbance that rotates around the eyewall at half the speed of the maximum tangential winds and is consistent with a vortex Rossby edge wave. The statistical distribution of vertical velocity in the eyewall indicates that the eyewall is composed of a small number of intense updrafts that account for the majority of the upward mass flux rather than a more gradual and symmetric eyewall circulation, consistent with the concept of hot towers. Tongues of high equivalent potential temperature, Theta(sub e), are seen along the inner edge of the eyewall updraft and within the low-level outflow. This air originates from outside of the eyewall with the highest theta(sub e) air coming from the layer closest to the surface after penetrating closest to the center. Occasionally, high Theta(sub e), air within the eye is drawn into the eyewall updrafts. The high Theta(sub e), air rising within the eyewall is shown to be associated with positive eyewall buoyancy with sufficient convective available potential energy along its path to produce relatively strong convective updrafts. Although the requirements for conditional symmetric instability are met within the eyewall and the air parcel trajectories follow slanted paths, the radial displacement of air parcels in the low-level outflow moves the air parcel sufficiently far away from the upper- warm core that the air becomes unstable to vertical displacements. Hence, convective instability rather than symmetric instability accounts for the stronger updrafts in the eyewall.

Braun, Scott A.↗

Stratospheric Benzene and Hydrocarbon Aerosols Detected in Saturn's Auroral Regions

Context. Saturn's polar upper atmosphere exhibits significant auroral activity; however, its impact on stratospheric chemistry (i.e. the production of benzene and heavier hydrocarbons) and thermal structure remains poorly documented. Aims. We aim to bring new constraints on the benzene distribution in Saturn's stratosphere, to characterize polar aerosols (their vertical distribution, composition, thermal infrared optical properties), and to quantify the aerosols' radiative impact on the thermal structure. Methods. Infrared spectra acquired by the Composite Infrared Spectrometer (CIRS) on board Cassini in limb viewing geometry are analysed to derive benzene column abundances and aerosol opacity profiles over the 3 to 0.1 mbar pressure range. The spectral dependency of the haze opacity is assessed in the ranges 680-900 and 1360-1440 cm(exp −1). Then, a radiative climate model is used to compute equilibrium temperature profiles, with and without haze, given the haze properties derived from CIRS measurements. Results. On Saturn's auroral region (80 deg S), benzene is found to be slightly enhanced compared to its equatorial and mid-latitude values. This contrasts with the Moses & Greathouse (2005, J. Geophys. Res., 110, 9007) photochemical model, which predicts a benzene abundance 50 times lower at 80◦S than at the equator. This advocates for the inclusion of ion-related reactions in Saturn's chemical models. The polar stratosphere is also enriched in aerosols, with spectral signatures consistent with vibration modes assigned to aromatic and aliphatic hydrocarbons, and presenting similarities with the signatures observed in Titan's stratosphere. The aerosol mass loading at 80 deg S is estimated to be 1−4 × 10(exp −5) g cm(exp −2), an order of magnitude less than on Jupiter, which is consistent with the order of magnitude weaker auroral power at Saturn.We estimate that this polar haze warms the middle stratosphere by 6 K in summer and cools the upper stratosphere by 5 K in winter. Hence, aerosols linked with auroral activity can partly account for the warm polar hood observed in Saturn's summer stratosphere.

satellites↗

Quantifying Trapped Powder in Electron Beam Powder Bed Fusion

Abstract Electron beam powder bed fusion (PBF-EB) shows great potential for manufacturing complex parts including those with internal cavities for heat exchanger, manifold systems, or energy absorption purposes. PBF-EB allows for the manufacture of channel geometries without the need for support structures. Due to the nature of the powder spreading process, powder feedstock is often trapped in intentionally manufactured cavities. This trapped powder can often be difficult to remove and can disturb the intended flow of fluid through the cavity or damage downstream components in its use case. These trapped powder particles present a risk of contamination and component failure if not completely evacuated. Ti6Al4V is a choice material for aerospace applications due to its high strength to weight ratio and its composition as a nonferrous metal; however, in weight sensitive applications excess entrapped powders or powders loosely attached to the surface could cause undesirable weight increases. The inherent spreading process of PBF-EB is different than laser powder bed fusion (PBF-LB) in its operational temperature, sintering. In addition, PBF-EB is less commonly studied in literature compared to its PBF-LB counterpart, and as a result the complexity of the semi-sintered powder and its spreading behavior are not well understood. Prior work has investigated the difficulty in removing trapped powder from PBF-EB, but these studies do not address how to quantify the amount of trapped powder in the cavity. Thus, an accurate method to measure the amount of trapped powder in the cavity must be investigated. In this work, Ti6Al4V coupons were manufactured with horizontal and vertical cavities of three different sizes. Archimedes testing allows for the determination of density differences caused by porosity and trapped powders by measuring mass and volumetric dispersion. Computed tomography (CT) is well suited for segmenting the internal structure and features of a part and has been studied for applications including voids, porosity, and dross. Thus, CT was explored as a method for evaluating trapped powder content in this work. The volumetric representation of the segmentation of the reconstructed CT volume can vary greatly depending on the input filter and thresholding methods. In this study, four different types of segmentation approaches were evaluated to determine the best approach for segmenting the volume as compared to an operator labeled ground truth. The percentage density results from the Archimedes testing were compared to the volumetric percent density from the computed tomography approach. Differences in packing density between two different internal channel features were investigated. Overall, this work sought to validate the use of computed tomography for the detection of trapped powders and present a framework for volumetric segmentation.

Johnstone, Brian↗

VAS data assimilation into a mesoscale model

In numerical weather prediction, one of the arising problems has always been related to insufficient data, especially in cases involving scales smaller than the synoptic rawinsonde network. The Visible Infrared Spin-Scan Radiometer (VISSR) Atmospheric Sounder (VAS) instrument on the Geostationary Operational Environmental Satellite (GOES) can provide mesoscale vertical profiles of temperature and moisture several times over a twelve hour period. However, as this data is only available over a relatively small area at any one time, the VAS data is more suited to data assimilation. A variational method has been developed to assimilate VAS data into a mesoscale model. In the present paper, the assimilation method and VAS data from one case are discussed. It is found that the greatest improvements to the forecast resulted when the VAS data resolved the mesoscale structure of the temperature and relative humidity fields.

Cram, J. M.↗

Estimating Mixing Heights Using Microwave Temperature Profiler

A paper describes the Microwave Temperature Profiler (MTP) for making measurements of the planetary boundary layer thermal structure data necessary for air quality forecasting as the Mixing Layer (ML) height determines the volume in which daytime pollution is primarily concentrated. This is the first time that an airborne temperature profiler has been used to measure the mixing layer height. Normally, this is done using a radar wind profiler, which is both noisy and large. The MTP was deployed during the Texas 2000 Air Quality Study (TexAQS-2000). An objective technique was developed and tested for estimating the ML height from the MTP vertical temperature profiles. In order to calibrate the technique and evaluate the usefulness of this approach, estimates from a variety of measurements during the TexAQS-2000 were compared. Estimates of ML height were used from radiosondes, radar wind profilers, an aerosol backscatter lidar, and in-situ aircraft measurements in addition to those from the MTP.

Nielson-Gammon, John↗

Detailed Structure of the Tropical Upper Troposphere and Lower Stratosphere as Revealed by Balloon Sonde Observations of Water Vapor, Ozone, Temperature, and Winds During the NASA TCSP and TC4 Campaigns

We report on balloon sonde measurements of water vapor and ozone using the cryogenic frost point hygrometer and electrochemical concentration cell ozonesondes made at Alajuela, Costa Rica (10.0 N, 84.2 W) during two NASA airborne campaigns: the Tropical Convective Systems and Processes (TCSP) mission in July 2005 and the Tropical Composition, Clouds, and Climate Coupling Experiment (TC4), July - August 2007. In both campaigns we found an upper troposphere that was frequently supersaturated but no evidence that deep convection had reached the tropopause. The balloon sondes were complemented by campaigns of 4 times daily high-resolution radiosondes from mid-June through mid-August in both years. The radiosonde data reveal vertically propagating equatorial waves that caused a large increase in the variability of temperature in the tropical tropopause layer (TTL). These waves episodically produced cold point tropopauses (CPTs) above 18 km, yet in neither campaign was saturation observed above approx 380 K or 17 km. The averages of the water vapor minima below this level were 5.2 ppmv in TCSP and 4.8 ppmv in TC4, and the individual profile minima all lay at or above approx 360 K. The average minima in this 360 C380 K layer provide a better estimate of the effective stratospheric entry value than the average mixing ratio at the CPT. We refer to this upper portion of the TTL as the tropopause saturation layer and consider it to be the locus of the final dehydration of nascent stratospheric air. As such, it is the local equivalent to the tape head of the water vapor tape recorder.

Selkirk, Henry B.↗

Cu 2 I 2 Se 6 : A Metal–Inorganic Framework Wide-Bandgap Semiconductor for Photon Detection at Room Temperature

Cu 2 I 2 Se 6 is a new wide-bandgap semiconductor with high stability and great potential toward hard radiation and photon detection. Cu 2 I 2 Se 6 crystallizes in the rhombohedral R$\bar{3}m$ space group with a density of d = 5.287 g·cm –3 and a wide bandgap E g of 1.95 eV. First-principles electronic band structure calculations at the density functional theory level indicate an indirect bandgap and a low electron effective mass m e * of 0.32. The congruently melting compound was grown in centimeter-size Cu 2 I 2 Se 6 single crystals using a vertical Bridgman method. A high electric resistivity of ~10 12 Ω·cm is readily achieved, and detectors made of Cu 2 I 2 Se 6 single crystals demonstrate high photosensitivity to Ag Kα X-rays (22.4 keV) and show spectroscopic performance with energy resolutions under 241 Am α-particles (5.5 MeV) radiation. The electron mobility is measured by a time-of-flight technique to be ~46 cm 2 ·V –1 ·s –1 . This value is comparable to that of one of the leading γ-ray detector materials, TlBr, and is a factor of 30 higher than mobility values obtained for amorphous Se for X-ray detection.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal environment of the Southern Washington region of the Cascadia subduction zone

Eleven recently collected multichannel seismic (MCS) profiles from the Cascadia Open–Access Seismic Transects experiment offshore Washington State are used to characterize the distribution of bottom–simulating reflectors (BSRs) from seaward of the deformation front onto the continental shelf of the Cascadia Subduction Zone. The 11 MCS lines consisted of nine lines perpendicular and two lines parallel to the Cascadia margin covering a 100 km along–strike region of the accretionary wedge. From these MCS profiles we generated a 3–D view of the Cascadia margin thermal structure by interpreting 40,232 individual BSR picks in terms of temperature and heat flow. Overall BSR–derived heat flow values decrease from approximately 95 mW m –2 10 km east of the deformation front to approximately 60 mW m –2 located 60 km landward of the deformation front. Anomalously low heat flow values near 25 mW m –2 on a prominent midmargin terrace indicate recent sediment failure within the accretionary prism. Localized differences between BSR heat flow and numerical models reflect an estimated regional mean vertical fluid flow of +0.53 cm yr –1 for the survey area, with localized fluid flow approaching a maximum of +3.8 cm yr –1 . Distinct finite element models for the nine MCS profiles perpendicular to the deformation front reproduce BSR heat flow values, producing an overall root–mean–square misfit of 10.2 mW m –2 . In conclusion, at the deformation front, the incoming oceanic sediment/crust interface temperatures vary from 164°C to 179°C, indicating the updip limit of the Cascadia seismogenic zone.

58 GEOSCIENCES↗

Response of Extreme Rainfall to Atmospheric Warming and Wetting: Implications for Hydrologic Designs Under a Changing Climate

Understanding the processes of rainfall extremes and their response to anthropogenic climate change is pivotal for improved adaptation of unprecedented flood hazards around the world. Here we take the record-breaking 20 July 2021 storm over central China as an example. We investigate the response of this particular storm to atmospheric warming (i.e., increase in air temperature) and wetting (i.e., increase in atmospheric moisture content) based on a series of convection-permitting model simulations. Our results show non-monotonic changes of the space-time rainfall variability to either increased temperature or atmospheric moisture content. The most extreme rain rate is produced when relative humidity is increased by 20~40 % or temperature is increased by less than 2°C. The non-monotonic rainfall response is more clearly revealed at fine spatial (100-1000 km 2 ) and temporal scales (less than 6 hours) rather than over the entire domain (~10 4 km 2 ) and aggregated over the storm duration (around two days). This is mainly attributable to the distinct feedbacks from atmospheric dynamics (i.e., moisture convergence and interaction with regional topography) rather than regulated by thermodynamic changes alone. Furthermore, atmospheric warming poses notable changes in the vertical structure of storm cells, contributing to reduced areal reduction factors at small spatial scales and short durations, while atmospheric wetting additionally modifies storm evolution properties. Our modeling analyses challenge the existing practices for hydrologic designs under a changing climate, highlighting particular vulnerability for cities or small basins to short-duration rainfall extremes and the resultant flash flood hazards.

54 ENVIRONMENTAL SCIENCES↗

Stress-directed compositional patterning of SiGe substrates for lateral quantum barrier manipulation

While vertical stacking of quantum well and dot structures is well established in heteroepitaxial semiconductor materials, manipulation of quantum barriers in the lateral directions poses a significant engineering challenge. Here, we demonstrate lateral quantum barrier manipulation in a crystalline SiGe alloy using structured mechanical fields to drive compositional redistribution. To apply stress, we make use of a nano-indenter array that is pressed against a Si{sub 0.8}Ge{sub 0.2} wafer in a custom-made mechanical press. The entire assembly is then annealed at high temperatures, during which the larger Ge atoms are selectively driven away from areas of compressive stress. Compositional analysis of the SiGe substrates reveals that this approach leads to a transfer of the indenter array pattern to the near-surface elemental composition, resulting in near 100% Si regions underneath each indenter that are separated from each other by the surrounding Si{sub 0.8}Ge{sub 0.2} bulk. The “stress transfer” process is studied in detail using multiscale computer simulations that demonstrate its robustness across a wide range of applied stresses and annealing temperatures. While the “Si nanodot” structures formed here are not intrinsically useful as quantum structures, it is anticipated that the stress transfer process may be modified by judicious control of the SiGe film thickness and indenter array pattern to form more technologically useful structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Limb Infrared Monitor of the Stratosphere - Experiment description, performance, and results

An experiment and results, using a six-channel infrared radiometer aboard the Nimbus 7 spacecraft to sound the composition and structure of the middle atmosphere, are described. The measurement requirements are discussed, and critical instrument parameters are identified. Next, the instrument and its laboratory calibration are described. Temperature accuracy and precision are estimated to be 2 K and about 0.4 K respectively. Accuracy of the trace gas measurements is about 25 percent, comparable to the estimated accuracy of the in situ comparison data; their precision is about 0.25 ppmv for ozone and water vapor and 0.2 ppbv for nitric acid and nitrogen dioxide. Examples of the vertical profiles, maps, and cross sections of the data show previously unobserved variations with latitude, altitude, and time. The results demonstrate that infrared limb scanning is an extremely powerful method for sounding the middle atmosphere.

Gille, J. C.↗

Comparison between S. T. radar and in situ balloon measurements

A campaign for simultaneous in situ and remote observation of both troposphere and stratosphere took place near Aire-sur-l'Adour (in southeastern France) on May 4, 1984. The aim of this campaign was a better understanding of the physics of radar echoes. The backscattered signal obtained with a stratosphere-troposphere radar both at the vertical and 15 deg. off vertical is compared with the velocity and temperature measurements made in the same region (about 10 km north of the radar site) by balloon-borne ionic anenometers and temperature sensors. In situ measurements clearly indicate that the temperature fluctuations are not always consistent with the standard turbulent theory. Nevertheless, the assumptions generally made (isotropy and turbulent field in k) and the classical formulation so derived for radar reflectivity are able to reproduce the shape of the radar return power profiles in oblique directions. Another significant result is the confirmation of the role played by the atmospheric stratification in the vertical echo power. It is important to develop these simultaneous in situ and remote experiments for a better description of the dynamical and thermal structure of the atmosphere and for a better understanding of the mechanisms governing clear-air radar reflectivity.

Dalaudier, F.↗

Lidar Measurements of Wind, Moisture and Boundary Layer Evolution in a Dryline During IHOP2002

Variability in the convective boundary layer moisture, wind and temperature fields and their importance in the forecasting and understanding of storms have been discussed in the literature. These variations have been reported in relation to frontal zones, stationary boundaries and during horizontal convective rolls. While all three vary substantially in the convective boundary layer, moisture poses a particular challenge. Moisture or water vapor concentration (expressed as a mass mixing ratio, g/kg), is conserved in all meteorological processes except condensation and evaporation. The water vapor mixing ratio often remains distinct across an air -mass boundary even when the temperature difference is indistinct. These properties make it an ideal choice in visualizing and understanding many of the atmosphere's dynamic features. However, it also presents a unique measurement challenge because water vapor content can vary by more than three orders of magnitude in the troposphere. Characterization of the 3D-distribution of water vapor is also difficult as water vapor observations can suffer from large sampling errors and substantial variability both in the vertical and horizontal. This study presents groundbased measurements of wind, boundary layer structure and water vapor mixing ratio measurements observed by three co-located lidars. This presentation will focus on the evolution and variability of moisture and wind in the boundary layer during a dry line event that occurred on 22 May 2002. These data sets and analyses are unique in that they combine simultaneous measurements of wind, moisture and CBL structure to study the detailed thermal variability in and around clear air updrafts during a dryline event. It will quantify the variation caused by, in and around buoyant plumes and across a dryline. The data presented here were collected in the panhandle of Oklahoma as part of the International BO Project (IHOP-2002), a field experiment that took place over the Southern Great Plains (SGP) of the United States from 13 May to 30 June 2002. The chief goal of IHOP-2002 is to improve characterization of the four-dimensional (4-D) distribution of water vapor and its application to improving the understanding and prediction of convection

Demoz, Belay↗

Incorporating Plant Phenology Dynamics in a Biophysical Canopy Model

The Multi-Layer Canopy Model (MLCan) is a vegetation model created to capture plant responses to environmental change. Themodel vertically resolves carbon uptake, water vapor and energy exchange at each canopy level by coupling photosynthesis, stomatal conductance and leaf energy balance. The model is forced by incoming shortwave and longwave radiation, as well as near-surface meteorological conditions. The original formulation of MLCan utilized canopy structural traits derived from observations. This project aims to incorporate a plant phenology scheme within MLCan allowing these structural traits to vary dynamically. In the plant phenology scheme implemented here, plant growth is dependent on environmental conditions such as air temperature and soil moisture. The scheme includes functionality that models plant germination, growth, and senescence. These growth stages dictate the variation in six different vegetative carbon pools: storage, leaves, stem, coarse roots, fine roots, and reproductive. The magnitudes of these carbon pools determine land surface parameters such as leaf area index, canopy height, rooting depth and root water uptake capacity. Coupling this phenology scheme with MLCan allows for a more flexible representation of the structure and function of vegetation as it responds to changing environmental conditions.

environmental changes↗

Anisotropic optical and magnetic response in self-assembled TiN–CoFe 2 nanocomposites

Transition metal nitrides (e.g., TiN) have shown tremendous promise in optical metamaterials for nanophotonic devices due to their plasmonic properties comparable to noble metals and superior high temperature stability. Vertically aligned nanocomposites (VANs) offer a great platform for combining two dissimilar functional materials with a one-step deposition technique toward multifunctionality integration and strong structural/property anisotropy. Here, we report a two-phase nanocomposite design combining ferromagnetic CoFe 2 nanosheets in the plasmonic TiN matrix as a new hybrid plasmonic metamaterial. The hybrid metamaterials exhibit anisotropic optical and magnetic responses, as well as a pronounced magneto-optical coupling response evidenced by Magneto-optic Kerr Effect measurement, owing to the novel vertically aligned structure. This work demonstrates a new TiN-based metamaterial with anisotropic properties and multifunctionality toward light polarization modulation, optical switching, and integrated optics.

36 MATERIALS SCIENCE↗

Advanced manufacturing development of a composite empennage component for L-1011 aircraft. Phase 3: Production readiness verification testing

Twenty-two specimens of each of two key structural elements of the Advance Composite Vertical Fin (ACVF) were fabricated and tested. One element represented the front spar at the fuselage attachment area and the other element represented the cover at the fuselage joint area. Ten specimens of each element were selected for static testing. The coefficient of variation resulting from the tests was 3.28 percent for the ten cover specimens and 6.11 percent for the ten spar specimens, which compare well with metallic structures. The remaining twelve cover and twelve spar specimens were durability tested in environmental chambers which permitted the temperature and humidity environment to be cycled as well as the applied loads. Results of the durability tests indicated that such components will survive the service environment.

Jackson, A.↗

Coherent wave-zonal mean flow interactions in the troposphere

A comprehensive analysis of wave-zonal mean flow variations in the troposphere is carried out using results of observations on the spatial structure and temporal evolution of synoptic time scale variations of the tropospheric zonal mean flow. Seven years of daily operational analysis are examined along with data from the NCAR GCM. Coherent wave-zonal mean flow interactions were revealed via cross-correlation analyses, including fluctuations in zonal mean temperature, three-dimensional winds, and quadratic wave quantities. It was found that tropical zonal wind tendency fluctuations are coherent with those anticipated from quasi-geostrophic wave driving, while tropical temperature tendencies are incoherent with analyzed zonal mean vertical velocities.

Randel, William J.↗