Search NASA⌕ Search

SEARCH · Search NASA

Results for “accelerator technology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Accelerator Physics Center at Fermilab : History and Accomplishments (2007-2018)

Fermilab’s Accelerator Physics Center (APC) was created in June 2007 with mission to carry out research and development to keep the US leading high-energy physics laboratory at the forefront of accelerator science, technology and facility operation. In support of the FNAL high-energy physics research mission, APC scientists and enginners conducted accelerator R&D aimed at next-generation and beyond accelerator facilities; provided accelerator physics support for existing operational programs and the evolution thereof; trained accelerator scientists and engineer and established experimental programs for a broad range of accelerator R&D that can be accessed by both Fermilab staff and the US and world HEP community. APC was a center-place for in-depth design, research and development efforts which allowed the Laboratory to make intelligent decisions on the ILC in the US, on the Muon Collider, as well as originate projects like PIP-II (through the Proton Driver/Project-X work), LHC-AUP (via LARP) and the IOTA/FAST R&D facility. APC was also the birthplace and host of many national and international collaborations and several educational/training programs in beam physics resulted in 27 PhD theses. In the Fall 2018, following an important milestone of the first beam circulating in the IOTA ring, the APC was re-organized into several departments in Accelerator Division, charged to carry out the accelerator physics research with IOTA/FAST beams and making it relevant for future upgrades of the Fermilab accelerator complex.

43 PARTICLE ACCELERATORS↗

Conceptual Design Report -- eSPS

The design of a primary electron beam facility at CERN is described. It re-enables the SPS as an electron accelerator, and leverages the development invested in CLIC technology for its injector and as accelerator R&D infrastructure. The facility would be relevant for several of the key priorities in the 2020 update of the European Strategy for Particle Physics, such as an electron-positron(e-p) Higgs factory, accelerator R&D, dark sector physics, and neutrino physics. In addition, it could serve experiments in nuclear physics. The electron beam delivered by this facility would provide access to light dark matter production significantly beyond the targets predicted by a thermal dark matter origin, and for natures of dark matter particles that are not accessible by direct detection experiments. It would also enable electro-nuclear measurements crucial for precise modelling the energy dependence of neutrino-nucleus interactions, which is needed to precisely measure neutrino oscillations as a function of energy. The implementation of the facility is the natural next step in the development of X-band high-gradient acceleration technology, a key technology for compact and cost-effective electron/positron linacs. It would also become the only facility with multi-GeV drive bunches and truly independent electron witness bunches for plasma wakefield acceleration. The facility would be used for the development and studies of a large number of components and phenomena for a future e-p Higgs and electroweak factory as the first stage of a next circular collider at CERN, and its cavities in the SPS would be the same type as foreseen for such a future collider. The operation of the SPS with electrons would train a new generation of scientists. The facility could be made operational in about five years and would operate in parallel and without interference with Run 4 at the LHC.

43 PARTICLE ACCELERATORS↗

Grating-based deflecting, focusing, and diagnostic dielectric laser accelerator structures

Recent technological advances has made possible the realization of the first laser-driven particle accelerator structure to be fabricated lithographically. However, a complete particle accelerator requires more than just accelerating elements. In this paper, we present a grating-based design for three other quintessential accelerator elements: the focusing structure, the deflecting structure, and the diagnostic structure.

43 PARTICLE ACCELERATORS↗

Coal to Carbon Fibers

This report documents activities carried out by Oak Ridge National Laboratory and by Ramaco Carbon LLC under CRADA project NFE-20-08273 entitled “Coal to Carbon Fibers.” This project’s main objective was the demonstration of commercially relevant utilization of coal as a precursor for high-value-added products, such as carbon fibers. The specific objectives included the following: • Deploy a production platform for the conversion of coal into carbon fibers in a way that utilizes preexisting base technologies and accelerates the commercialization of coal to carbon fibers. • Rapid deployment and utilization of versatile conversion test beds for accommodating preexisting base technologies for both the conversion of coal-to-pitch (proven donor solvent liquefaction techniques) and conversion of pitch-to-fiber (proven melt spun and melt blown techniques). Results from the generation of an isotropic pitch from a subbituminous coal through the low severity direct coal liquefaction process are presented. Carbon fibers were produced from this isotropic pitch through melt spinning and melt blowing.

01 COAL, LIGNITE, AND PEAT↗

3D treatment planning systems

Three-dimensional (3D) treatment planning systems have evolved and become crucial components of modern radiation therapy. The systems are computer-aided designing or planning softwares that speed up the treatment planning processes to arrive at the best dose plans for the patients undergoing radiation therapy. Furthermore, the systems provide new technology to solve problems that would not have been considered without the use of computers such as conformal radiation therapy (CRT), intensity-modulated radiation therapy (IMRT), and volumetric modulated arc therapy (VMAT). The 3D treatment planning systems vary amongst the vendors and also the dose delivery systems they are designed to support. As such these systems have different planning tools to generate the treatment plans and convert the treatment plans into executable instructions that can be implemented by the dose delivery systems. The rapid advancements in computer technology and accelerators have facilitated constant upgrades and the introduction of different and unique dose delivery systems than the traditional C-arm type medical linear accelerators. The focus of this special issue is to gather relevant 3D treatment planning systems for the radiation oncology community to keep abreast of technology advancement by assess the planning tools available as well as those unique ''tricks or tips'' used to support the different dose delivery systems.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Prospects For and Progress Towards Laser-Driven Particle Therapy Accelerators

Recent advances in laser-ion acceleration have motivated research towards laser-driven compact accelerators for medical therapy. Realizing laser-ion acceleration for medical therapy will require adapting the medical requirements to the foreseeable laser constraints, as well as advances in laser-acceleration physics, beam manipulation and delivery, real-time dosimetry, treatment planning and translational research into a clinical setting.

43 PARTICLE ACCELERATORS↗

Ag ion generation irradiated by Nd:YAG laser onto solid target for use of direct plasma injection scheme

Direct plasma injection scheme (DPIS) is an acceleration scheme which consists of laser ion source and a radio frequency quadrupole linac (RFQ) linac for high current heavy ion acceleration. With this scheme, over 60 mA of carbon and aluminum beam was achieved at the RFQ exit. We are planning to accelerate Ag ions as a heavier material than used previously. Ag plasma properties using Nd:YAG laser (2.3 J/6 ns) were measured toward the acceleration with DPIS. The results showed that the highest ion yield was obtained at Ag{sup 15+}. Based on these results, multicharged Ag ion transportation inside RFQ was simulated and the expected current at the exit of RFQ was over 14 mA for Ag{sup 15+} using the RFQ dedicated for Ag acceleration.

36 MATERIALS SCIENCE↗

Influence of subpicosecond laser pulse duration on proton acceleration

The influence of pulse duration on proton acceleration using subpicosecond (30-300 fs), ultraintense (from 3.6x10{sup 18} to 3.6x10{sup 19} W/cm{sup 2}), constant energy (0.14 J) laser pulses is studied using two-dimensional simulations. The entire pulse duration is modeled so that during the rising edge of the pulse a preplasma can naturally expand from the target front and rear surfaces into vacuum, altering respectively laser absorption and electrostatic field generation. In this paper, we study this effect for two target profiles (sharp-edge profile and smooth density gradient at the front side) and we point out the existence of a weak optimum pulse duration for proton acceleration. For the different pulse durations we consider, we first show that the maximum proton energy variations are similar to those of the rear side electrostatic field amplitude. The energy variations, however, are smaller than expected from the field variations, and we explain this effect by characteristic proton acceleration time.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stark spectroscopy of a probe lithium beam excited with two dye lasers as a technique to study a high-power ion-beam diode

A non-disturbing measurement of electric field distributions is a subject of special interest in plasma physics and high-voltage devices. In this paper we describe a diagnostic technique for remote sensing of electric fields via injection of a probe beam of lithium atoms and cascade excitation of resonance fluorescence with two broadband dye lasers. The fluorescence spectrum was recorded using a monochromator equipped with an optical multi-channel analyser. The magnitude of the local electric field was retrieved from the Stark-shifted components of the 3d-2plithium spectral line. The technique was applied to measurements of the electric field in the applied-B-field high-voltage diode of the 1 TW KALIF ion-beam accelerator.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Acceleration and dynamics of an electron in the degenerate and magnetized plasma elliptical waveguide

The dynamics and energy gain of an electron in the field of a transverse magnetic wave propagating inside an elliptical degenerate plasma waveguide is analytically investigated by finding the field components of the TM{sub mr} mode in this waveguide. Besides, by solving the relativistic momentum and energy equations the deflection angle and the acceleration gradient of the electron in the waveguide are obtained. Furthermore, the field components of the hybrid mode and the transferred power in the presence of the magnetic field in this waveguide are found. Also by applying the boundary conditions at the plasma-conductor interface, we calculate the dispersion relation. It is shown that the cutoff frequency of this mode is dependent on the plasma density but independent of the magnetic field. Then, a single-electron model for numerical calculations of the electron deflection angle and acceleration gradient inside the magnetized plasma-filled elliptical waveguide is generally presented to be used as a cascading process for the acceleration purposes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the origin of super-hot electrons from intense laser interactions with solid targets having moderate scale length preformed plasmas

We use particle-in-cell modeling to identify the acceleration mechanism responsible for the observed generation of super-hot electrons in ultra-intense laser-plasma interactions with solid targets with pre-formed plasma. We identify several features of direct laser acceleration that drive the generation of super-hot electrons. We find that, in this regime, electrons that become super-hot are primarily injected by a looping mechanism that we call loop-injected direct acceleration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron acceleration by a focused laser pulse in a static magnetic field

The model given by K. P. Singh [Phys. Rev. E 69, 056410 (2004)] for vacuum laser acceleration in a static magnetic field is revisited by including the effects of diffraction and the longitudinal electric field of a focused laser beam. Compared with a similar model without a static magnetic field, a simulation shows that electrons can gain much more net energy in this model even using the fifth-order corrected equations for the field of a focused laser beam. The acceleration mechanism and the acceleration efficiency are also investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser acceleration of electrons in two-dimensionally inhomogeneous plasma at the boundary of a metal foil

The electron acceleration mechanism associated with the generation of a plasma wave due to self-modulation instability of laser radiation in a subcritical plasma produced by a laser prepulse coming 10 ns before the arrival of the main intense femtosecond pulse is considered. Three-dimensional particle-in-cell simulations of the interaction of laser radiation with two-dimensionally inhomogeneous subcritical plasma have shown that, for a sufficiently strong plasma inhomogeneity and a sharp front of the laser pulse, efficient plasma wave excitation, electron trapping, and generation of collimated electron beams with energies on the order of 0.2–0.5 MeV can occur. The simulation results agree with experiments on the generation of collimated beams of accelerated electrons from metal targets irradiated by intense femtosecond laser pulses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electromagnetic Launcher with Massive Light-Plasma Initiator

The results of experiments with an initiator of lithium and graphite, whose mass was 10% of the mass of the projectile, are presented. Similar initiators produce plasma with a high speed of sound and provide the initial speed of the projectile of ∼0.5 km/s. The droplet-shaped damage on the insulating wall of the accelerator channel are described. The link between the appearance of these damages and the sharp deceleration of the plasma piston (PP) is noted. A hypothesis relating the occurrence of damages to the resonant deformation of the channel under the action of a moving high-pressure front is discussed. It is shown that the hypothesis about the resonant deformation of the channel qualitatively explains the known features of the accelerator operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

C$^3$: A "Cool" Route to the Higgs Boson and Beyond

We present a proposal for a cold copper distributed coupling accelerator that can provide a rapid route to precision Higgs physics with a compact 8 km footprint. This proposal is based on recent advances that increase the efficiency and operating gradient of a normal conducting accelerator. This technology also provides an $e^{+}e^{-}$ collider path to physics at multi-TeV energies. In this article, we describe our vision for this technology and the near-term R&D program needed to pursue it.

43 PARTICLE ACCELERATORS↗

Accelerated Materials Design for Molten Salt Technologies Using Innovative High-Throughput Methods

The focus of the project is on building an innovative accelerated materials design platform for molten salt technologies using novel high-throughput methods coupled to data analytics. The main objectives is to predict a FeCrMnNi alloy compositional space with better corrosion resistance than stainless steel 316 and identify new molten salt corrosion mechanisms. The project demonstrates the feasibility to use high-throughput methods coupled to data analytics to accelerate alloy design for extreme environments applications. Using a trained and tested machine learning (ML) model, 2000 FeCrMnNi alloy corrosion rate in molten chloride salts were predicted and a compositional field with corrosion rate lower than 316 stainless steel was identified. The ML model interpretability unveiled multiple features of importance in the model prediction. Some features were expected to be of relative significance, such as work function, surface energy and alloy electronegativity, and the ML model interpretability analysis confirmed those. On the other hand, the most important feature is the diffusion coefficient of Ni in the bulk alloy which indicates that a surface diffusion mechanism plays an important role in the overall corrosion mechanism in molten salts.

36 MATERIALS SCIENCE↗