Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Aitken Mode Aerosols Buffer Decoupled Mid‐Latitude Boundary Layer Clouds Against Precipitation Depletion

Aerosol-cloud-precipitation interactions are a leading source of uncertainty in estimating climate sensitivity. Remote marine boundary layers where accumulation mode (~100–400 nm diameter) aerosol concentrations are relatively low are very susceptible to aerosol changes. These regions also experience heightened Aitken mode aerosol (~10–100 nm) concentrations associated with ocean biology. Aitken aerosols may significantly influence cloud properties and evolution by replenishing cloud condensation nuclei and droplet number lost through precipitation (i.e., Aitken buffering). We use a large-eddy simulation with an Aitken-mode enabled microphysics scheme to examine the role of Aitken buffering in a mid-latitude decoupled boundary layer cloud regime observed on 15 July 2017 during the Aerosol and Cloud Experiments in the Eastern North Atlantic flight campaign: cumulus rising into stratocumulus under elevated Aitken concentrations (~100–200 mg -1 ). In situ measurements are used to constrain and evaluate this case study. Our simulation accurately captures observed aerosol-cloud-precipitation interactions and reveals time-evolving processes driving regime development and evolution. Aitken activation into the accumulation mode in the cumulus layer provides a reservoir for turbulence and convection to carry accumulation aerosols into the drizzling stratocumulus layer above. Further Aitken activation occurs aloft in the stratocumulus layer. Together, these activation events buffer this cloud regime against precipitation removal, reducing cloud break-up and associated increases in heterogeneity. We examine cloud evolution sensitivity to initial aerosol conditions. With halved accumulation number, Aitken aerosols restore accumulation concentrations, maintain droplet number similar to original values, and prevent cloud break-up. Without Aitken aerosols, precipitation-driven cloud break-up occurs rapidly. In this regime, Aitken buffering sustains brighter, more homogeneous clouds for longer.

54 ENVIRONMENTAL SCIENCES↗

Structure characterization of MHEMT heterostructure elements with In{sub 0.4}Ga{sub 0.6}As quantum well grown by molecular beam epitaxy on GaAs substrate using reciprocal space mapping

The crystallographic parameters of elements of a metamorphic high-electron-mobility transistor (MHEMT) heterostructure with In{sub 0.4}Ga{sub 0.6}As quantum well are determined using reciprocal space mapping. The heterostructure has been grown by molecular-beam epitaxy (MBE) on the vicinal surface of a GaAs substrate with a deviation angle of 2° from the (001) plane. The structure consists of a metamorphic step-graded buffer (composed of six layers, including an inverse step), a high-temperature buffer of constant composition, and active high-electron-mobility transistor (HEMT) layers. The InAs content in the metamorphic buffer layers varies from 0.1 to 0.48. Reciprocal space mapping has been performed for the 004 and 224 reflections (the latter in glancing exit geometry). Based on map processing, the lateral and vertical lattice parameters of In{sub x}Ga{sub 1–x}As ternary solid solutions of variable composition have been determined. The degree of layer lattice relaxation and the compressive stress are found within the linear elasticity theory. The high-temperature buffer layer of constant composition (on which active MHEMT layers are directly formed) is shown to have the highest (close to 100%) degree of relaxation in comparison with all other heterostructure layers and a minimum compressive stress.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of Electron Extraction and Protection Layers on Cu 2 O Photocathodes

Many semiconductor photoelectrodes used for solar fuel production require the addition of buffer and protection layers to enhance their solar-to-fuel conversion efficiency and long-term stability. For example, Cu 2 O, which is the most efficient oxide-based photocathode but suffers from photocorrosion, has been assembled with various buffer and protection layers to suppress photocorrosion and use more photoexcited electrons for useful reactions such as water reduction to H 2 . However, the abilities of various buffer and protection layers to extract electrons from Cu 2 O have never been directly evaluated. Instead, their abilities were estimated based on the photocurrent for water reduction after adding a hydrogen evolution catalyst on top of them. In these evaluations, as the photocurrent is affected not only by the buffer or protection layer but also by the catalyst, the ability of the buffer or protection layer to extract electrons from Cu 2 O could not be accurately determined or compared. Here, in this study, we demonstrate that 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPOL), whose reduction rate is faster than the photocorrosion rate of Cu 2 O, can be used as an effective electron scavenger to directly evaluate any change caused by a buffer or protection layer in electron-hole separation in Cu 2 O. In particular, we compared the performances of ZnO and TiO 2 layers on Cu 2 O for extracting electrons and suppressing photocorrosion. We also compared the performances of TiO 2 layers prepared by electrodeposition and atomic layer deposition (ALD) to show that the deposition method can make a striking impact on the performance of the same TiO 2 because it can affect the critical characteristics of the layer (e.g., defect levels, conductivity, interfacial atomic arrangements) that govern interfacial charge transfer in multilayer photoelectrodes.

36 MATERIALS SCIENCE↗

Ceramography and Thermal Modelling of Irradiated TRISO Particles using BISON

This study presents a comprehensive analysis of irradiated TRISO fuel particles from the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program conducted at the Advanced Test Reactor (ATR) as part of my internship. Failure Analysis using high-resolution microscopy was performed to characterize mechanisms in TRISO particle layers, including the kernel, buffer, inner pyrolytic carbon (IPyC), silicon carbide (SiC), and outer pyrolytic carbon (OPyC) coatings. Failure modes were systematically classified. Thermal conductivity properties of each TRISO layer were evaluated through experimental measurements and computational models for use in BISON finite element code. Experimental thermal conductivity values ranged from 0.5 W/m·K for the buffer layer to 168 W/m·K for SiC, while BISON simulations provided averaged values of 0.57 W/m·K (buffer), 4.0 W/m·K (PyC layers), and 15.95 W/m·K (SiC). Temperature-dependent correlations from PARFUME were implemented for kernel thermal properties.

BISON↗

Assessment of buffer-IPyC thermomechanical debonding behavior using new experimental strength data in BISON

TRIstructural ISOtropic (TRISO) fuel is a nuclear fuel commonly used in High Temperature Gas-cooled Reactors (HTGRs). A single sub-millimeter-diameter TRISO fuel particle consists of a spherical fuel kernel surrounded by four coating layers: a low-density pyrocarbon buffer layer, an inner pyrolytic carbon (IPyC) layer, a silicon carbide (SiC) layer, and an outer pyrolytic carbon (OPyC) layer. The kernel is commonly made of UO2 or a mixture of uranium carbide and uranium oxide (UCO). During reactor operation, the TRISO coating layers are subjected to irradiation-induced dimensional changes and the associated thermomechanical behavior of each layer. One of the observed behaviors is gap formation between the buffer and IPyC layer due to the porous buffer’s irradiation-induced shrinkage exceeding that of the IPyC layer. Not all irradiated particles will experience buffer-IPyC gap formation. The debonding may be partial, or it may be nearly total. However, from post-irradiation examination of UCO TRISO fuels irradiated as part of the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program, it was concluded that partial buffer-IPyC debonding was the most common type of buffer-IPyC interaction. To predict TRISO thermomechanical performance, multi-physics models have been built that are being continually updated and refined. The BISON code is a finite element-based nuclear fuel performance code that may be used for 1D, 2D, and 3D TRISO particle simulations. This code is used to calculate fuel temperature, kernel swelling, buffer densification, thermal and irradiation creep, fracture, and fission gas production and release. One of the recent additions to the BISON code is the ability to model the process of layer debonding. This paper will focus on the simulation results of the improved BISON debonding model that will utilize updated strengths measured from irradiated AGR TRISO fuel particles. The new experimental strength data from micromechanical tests of irradiated TRISO fuel samples were exercised in the BISON simulations and compared to baseline strength data to assess their applicability in the models. This also includes updated buffer-IPyC bond strengths to simulate layer delamination. Based on current experimental observations it is noted that the buffer-IPyC separation occurs not exactly at the junction of these two layers, but more on the side of the buffer layer. That observation is also implemented in the TRISO interface debonding model. This improved modeling approach using experimental strength data to characterize buffer-IPyC debonding and its potential subsequent cracking will be presented in the paper along with comparisons to available experimental observations.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Buffered Electrochemical Polishing of Niobium

The standard preparation of superconducting radio-frequency (SRF) cavities made of pure niobium include the removal of a 'damaged' surface layer, by buffered chemical polishing (BCP) or electropolishing (EP), after the cavities are formed. The performance of the cavities is characterized by a sharp degradation of the quality factor when the surface magnetic field exceeds about 90 mT, a phenomenon referred to as 'Q-drop.' In cavities made of polycrystalline fine grain (ASTM 5) niobium, the Q-drop can be significantly reduced by a low-temperature (? 120 °C) 'in-situ' baking of the cavity if the chemical treatment was EP rather than BCP. As part of the effort to understand this phenomenon, we investigated the effect of introducing a polarization potential during buffered chemical polishing, creating a process which is between the standard BCP and EP. While preliminary results on the application of this process to Nb cavities have been previously reported, in this contribution we focus on the characterization of this novel electrochemical process by measuring polarization curves, etching rates, surface finish, electrochemical impedance and the effects of temperature and electrolyte composition. In particular, it is shown that the anodic potential of Nb during BCP reduces the etching rate and improves the surface finish.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic and Kinetic Mechanisms Governing the Synthesis of Nickel-Poor Cathodes

A deeper understanding of the thermodynamics and kinetics governing the lithiation and layering mechanisms of NMC cathode materials (LiNixMnyCozO 2 , where x + y + z = 1) offers valuable insights for enhancing synthesis methods and improving cathode performance. By employing atomistic and mesoscale approaches informed by in situ powder X-ray diffraction (PXRD) experiments, critical parameters for comprehending lithiation and layering processes and reaction rates were identified. The mesoscale approach captured the evolution of the phases and crystallite size observed in the in situ PXRD, revealing the differences in reaction rates with the use of different lithium salts and starting precursors. Ab initio molecular dynamics (AIMD) underscored the importance of vacancies and structural defects in promoting ion mobility and facilitating the nucleation of a layered domain. This nucleation disrupts the symmetry of disordered phases, ultimately creating a strained phase that serves as a buffer between layered and disordered regions. The lithiation and layering processes reflect a dynamic balance between the thermodynamic drive for a low-energy layered structure and the kinetic of diffusion, which is influenced by temperature and lithium vacancy concentration. Overall, reaction mechanisms are driven by the inherent defects of the intermediate phase that differ for NMC cathode materials. The lithium salts impact the rates of lithiation and layering, with a much slower process for Li 2 CO 3 .

25 ENERGY STORAGE↗

Determining the tensile strength of fuel surrogate TRISO-coated particle buffer, IPyC, and buffer-IPyC interlayer regions

A novel micro tensile sample fabrication technique for determining the tensile strength of the buffer, IPyC, and buffer -IPyC interlayer regions of surrogate (ZrO2) TRISO fuel particle layers was refined and implemented. Copper micro tensile samples served as baseline materials to verify the methods used. Tensile tests performed in this study, while limited in number, were analyzed using standard and Weibull statistics. As expected, the buffer layer was weakest, with an average ultimate tensile strength of 138.70 MPa, and the IPyC layer samples, were strongest, with an average ultimate tensile strength of 189.74 MPa. In the buffer -IPyC interface samples, all breaks occurred in the buffer region, though the average ultimate tensile strength of the samples, 159.80 MPa, was between the pure buffer and IPyC samples. These results suggest the interlayer region has unique properties, perhaps associated with pyrocarbon infiltration into the buffer layer during particle coating. All interlayer samples fractured within the buffer side; however, the stress strain behavior of some of these samples resembled the behavior of the IPyC layer samples. Here, the buffer and IPyC layer strengths had a normal distribution under Weibull analysis, while the interlayer region had a Rayleigh distribution. Further testing is needed to clarify both the standard and Weibull statistical results

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Subsurface Interface Structure Controlling Local Electronic Properties of Epitaxial Graphene on SiC(0001)

Recently realized high-mobility semiconducting epitaxial graphene on silicon carbide (SiC) [Zhao, J. Nature 2024, 625 (7993), 60−65, 10.1038/s41586-023-06811-0] provided an important step toward integration of the graphene-based system into active components in postsilicon micro- and nanoelectronics. However, the exact atomic-scale structure and complex bonding configurations of the first epitaxial graphene carbon layer (C buffer ) remain an open problem. Our recent report [Kolmer, M. Communications Physics 2024, 7 (1), 16, 10.1038/s42005-023-01515-3] has shed new light on understanding this interface, where the external transverse electric field-dependent dynamic switching behavior of the C buffer –SiC bonds was observed. Here, using scanning tunneling microscopy and spectroscopy (STM and STS), we present direct evidence of silicon (Si) vacancies at the interface and provide their distribution at the topmost reconstructed SiC(0001) layer. Bias voltage and epitaxial graphene thickness-dependent characterization of the collective C buffer –SiC interface showed that “Si” vacancy sites beneath C buffer are stable under STM electric fields. Moreover, the vacancies introduce localized electronic states below the Fermi level, thereby enhancing the charge-transfer phenomenon across the interface.

Thupakula, Umamahesh [Ames Laboratory (AMES), Ames↗

Fabrication Of Buried Self-Organized Stripes In The Ni/C{sub 60} Composite

A periodic array of striped nanoscopic domains, embedded in the epitaxially grown Ni layer, was formed after thermal annealing of the Ni/Ni+C{sub 60}/C{sub 60}/Ni thin multilayer sequence deposited on the MgO(001) monocrystal. The composite was annealed in 100 deg. C/1 hr increments in the range of 200-600 deg. C, and the structural evolution of the composite was analyzed mainly by Rutherford Backscattering and Scanning Electron Microscopy. The periodic system of the stripes was revealed after annealing at 600 deg. C. The possible mechanism of the domain formation is suggested as follows: temperatures below 500 deg. C incite diffusion (and consecutive disintegration) of the C{sub 60} molecules; temperatures above 500 deg. C induce forceful intermixing of the upper Ni/Ni+C{sub 60}/C{sub 60} layers; due to the pronounced immiscibility of the Ni and C (C{sub 60}) components the process of the phase separation is triggered. In the confined crystalline matrix of the buffer Ni layer the separation proceeds coordinately according to the Ni lattice template - the stripe domains are formed in a direction parallel to the main crystallographic orientation (001) of the Ni epilayer.

36 MATERIALS SCIENCE↗

Voltage contrast X-ray photoelectron spectroscopy reveals graphene-substrate interaction in graphene devices fabricated on the C- and Si- faces of SiC

We report on an X-ray photoelectron spectroscopy (XPS) study of two graphene based devices that were analyzed by imposing a significant current under +3 V bias. The devices were fabricated as graphene layers(s) on hexagonal SiC substrates, either on the C- or Si-terminated faces. Position dependent potential distributions (IR-drop), as measured by variations in the binding energy of a C1s peak are observed to be sporadic for the C-face graphene sample, but very smooth for the Si-face one, although the latter is less conductive. We attribute these sporadic variations in the C-face device to the incomplete electrical decoupling between the graphene layer(s) with the underlying buffer and/or substrate layers. Variations in the Si2p and O1s peaks of the underlayer(s) shed further light into the electrical interaction between graphene and other layers. Since the potential variations are amplified only under applied bias (voltage-contrast), our methodology gives unique, chemically specific electrical information that is difficult to obtain by other techniques.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

AGR-5/6/7 Irradiation As Run Predictions Using PARFUME

The PARticle FUel ModEl (PARFUME), a fuel performance modeling code used for high-temperature gas-cooled reactors, was used to model the Advanced Gas Reactor (AGR)-5/6/7 irradiation test using as-run physics and thermal data. The AGR-5/6/7 irradiation test consists of the combined fifth, sixth, and seventh planned irradiations of the AGR Fuel Development and Qualification Program. The AGR-5/6/7 test train is a multi-capsule, instrumented experiment that is designed for irradiation in the 133.4-mm diameter northeast flux trap position of the Advanced Test Reactor (ATR) at Idaho National Laboratory. Each capsule contains compacts filled with uranium oxycarbide unaltered fuel particles. This report documents the calculations performed to predict the failure probability of tristructural isotropic (TRISO)-coated fuel particles during the AGR-5/6/7 experiment. In addition, this report documents the calculated fission product release fraction from the fuel. The calculations include modeling of the AGR 5/6/7 irradiation that occurred from February 2018 to July 2020 over nine ATR cycles, including six normal cycles and three power axial locator mechanism cycles, for a total of approximately 376 effective full power days (EFPD). The irradiation conditions and material properties of the AGR-5/6/7 test predicted zero fuel particle failures in Capsules 1, 3, and 4. Fuel particle failures were predicted in two of the compacts in Capsule 2 and one particle failure is predicted in each one of the compacts in Capsule 5. All compacts that exhibited fuel particle failures predicted by PARFUME were caused by localized stress concentrations in the silicon carbide (SiC) layer caused by cracking in the inner pyrolytic (IPyC) layer. In addition, shrinkage of the buffer and IPyC layer during irradiation resulted in formation of a buffer-IPyC gap. Compacts with a lower irradiation temperature and fluence experienced the smallest buffer-IPyC gap formation. Conversely, higher irradiated temperature compacts with a high fluence experienced the largest buffer-IPyC gap formation. Compact 3-6-3 experienced the largest buffer IPyC gap formation of just under 21.7 µm. The release fraction of fission products silver (Ag), cesium (Cs), and strontium (Sr) vary depending on capsule location and irradiation temperature. The maximum release fraction of Ag occurs in Capsule 3, reaching up to 59.5% for the TRISO fuel particles (compact 3-6-3). The release fraction of the other two fission products, Cs and Sr, are much smaller. A maximum Cs release fraction of 1.1% occurred in compact 3-4-3 and 4.4% for Sr in compact 3-6-3.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Anisotropic temperature-dependent elastic constants and thermal conductivities of TRISO particle coatings

Tristructural isotropic (TRISO) particles show great promise as a candidate fuel for use in several next-generation high-temperature nuclear reactor designs due to their structural integrity and fuel performance at high temperatures and burnups. Computational codes exist that can simulate TRISO fuel performance characteristics and failure probabilities under extreme conditions which require knowledge of the TRISO coatings’ thermophysical properties. The thermophysical descriptions of the TRISO particle's layers (i.e., buffer, pyrolytic carbon, and silicon carbide) currently used in fuel performance codes, however, assume that many of these properties are constant with respect to temperature or texture. In this paper, we obtain the full elastic stiffness tensors of the carbon and silicon carbide layers, which have transversely isotropic symmetry. Additionally, the calculated elastic properties of each of the coating layers are in remarkable agreement with the current models at room temperature and correct orientations. Additionally, the textured 3C-SiC layer was found to exhibit novel auxetic behavior above 1500 °C. The anisotropic temperature-dependent thermal conductivities of the carbon layers were calculated using acoustical Grüneisen-Debye theory which are in excellent agreement with current models at room temperature and correct orientations. These texture- and temperature-dependent relationships can be incorporated into the thermophysical description of TRISO particles in order to more accurately model fuel performance and failure probabilities under extreme conditions in forthcoming high-fidelity computational simulations.

36 MATERIALS SCIENCE↗

Combinatorial chemical bath deposition of CdS contacts for chalcogenide photovoltaics

Contact layers play an important role in thin film solar cells, but new material development and optimization of its thickness is usually a long and tedious process. A high-throughput experimental approach has been used to accelerate the rate of research in photovoltaic (PV) light absorbers and transparent conductive electrodes, however the combinatorial research on contact layers is less common. Here, we report on the chemical bath deposition (CBD) of CdS thin films by combinatorial dip coating technique and apply these contact layers to Cu(In,Ga)Se 2 (CIGSe) and Cu 2 ZnSnSe 4 (CZTSe) light absorbers in PV devices. Combinatorial thickness steps of CdS thin films were achieved by removal of the substrate from the chemical bath, at regular intervals of time, and in equal distance increments. The trends in the photoconversion efficiency and in the spectral response of the PV devices as a function of thickness of CdS contacts were explained with the help of optical and morphological characterization of the CdS thin films. The maximum PV efficiency achieved for the combinatorial dip-coating CBD was similar to that for the PV devices processed using conventional CBD. Finally, the results of this study lead to the conclusion that combinatorial dip-coating can be used to accelerate the optimization of PV device performance of CdS and other candidate contact layers for a wide range of emerging absorbers.

14 SOLAR ENERGY↗

Tailoring SnO 2 , (Mg,Zn)O, and Ga:(Mg,Zn)O electro-optical properties and stability for solar cells

The electron density, mobility, bandgap, and band alignment of transparent conducting oxides (TCOs) can be tailored by adjusting composition and stoichiometry, thereby enabling interface engineering for diverse semiconductor applications. For example, solar cell efficiency can change enormously by adjusting TCO properties. At the same time, these TCO properties can shift during the deposition of other layers, anneals, and device operation. An ideal TCO should have tunable but stable electro-optical properties. Here, we deposit SnO 2 , (Mg,Zn)O (MZO), and Ga:(Mg,Zn)O (GMZO) films on glass and measure electro-optical characteristics before and after reducing, inert, oxidizing, and CdCl2 anneals over a range of temperatures. Electron density generally increases in the progression from oxidizing to inert and reducing ambients. SnO 2 is relatively stable compared to MZO but has less flexibility for interface engineering. We investigate GMZO as a similar but more stable alternative to MZO.The addition of Ga to MZO has significant effects on electron density and improves electro-optical stability, which can be advantageous for semiconductor applications. Furthermore, we demonstrate that GMZO can be readily incorporated into solar cells.

14 SOLAR ENERGY↗

Electronic structure of the Zn(O,S)/Cu(In,Ga)Se 2 thin-film solar cell interface

The electronic band alignment of the Zn(O,S)/Cu(In,Ga)Se2 interface in high-efficiency thin-film solar cells was derived using X-ray photoelectron spectroscopy, ultra-violet photoelectron spectroscopy, and inverse photoemission spectroscopy. Similar to the CdS/Cu(In,Ga)Se2 system, we find an essentially flat (small-spike) conduction band alignment (here: a conduction band offset of (0.09 +/- 0.20) eV), allowing for largely unimpeded electron transfer and forming a likely basis for the success of high-efficiency Zn(O,S)-based chalcopyrite devices. Furthermore, we find evidence for multiple bonding environments of Zn and O in the Zn(O,S) film, including ZnO, ZnS, Zn(OH)2, and possibly ZnSe.

14 SOLAR ENERGY↗