Search NASA⌕ Search

SEARCH · Search NASA

Results for “complexity analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Analysis of a Modern Hybrid and an Ancient Sugarcane Implicates a Complex Interplay of Factors in Affecting Recalcitrance to Cellulosic Ethanol Production

Abundant evidence exists to support a role for lignin as an important element in biomass recalcitrance. However, several independent studies have also shown that factors apart from lignin are also relevant and overall, the relative importance of different recalcitrance traits remains in dispute. In this study we used two genetically distant sugarcane genotypes, and performed a correlational study with the variation in anatomical parameters, cell wall composition, and recalcitrance factors between these genotypes. In addition we also tracked alterations in these characteristics in internodes at different stages of development. Significant differences in the development of the culm between the genotypes were associated with clear differential distributions of lignin content and composition that were not correlated with saccharification and fermentation yield. Given the strong influence of the environment on lignin content and composition, we hypothesized that sampling within a single plant could allow us to more easily interpret recalcitrance and changes in lignin biosynthesis than analysing variations between different genotypes with extensive changes in plant morphology and culm anatomy. The syringyl/guaiacyl (S/G) ratio was higher in the oldest internode of the modern genotype, but S/G ratio was not correlated with enzymatic hydrolysis yield nor fermentation efficiency. Curiously we observed a strong positive correlation between ferulate ester level and cellulose conversion efficiency. Together, these data support the hypothesis that biomass enzymatic hydrolysis recalcitrance is governed by a quantitative heritage rather than a single trait.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Document Management: A Focused Analysis on the Configuration Management Process at Y-12 National Security Complex

The configuration management process at Y-12 is a crucial process to ensure safe operations and compliance with Department of Energy (DOE) regulations and requirements. This process is evaluated utilizing systems-thinking methodology in order to understand the current operational flow, with the ultimate goal of building an easily understandable, representative model. This model offers insights on key areas of waste and provides a potential solution by modernizing rate limiting steps: a software implementation to update the traditional document management system and make it paperless. Stakeholders of the software implementation are identified in order to define characteristic requirements of an effective product and the anticipated benefit is evaluated. Ultimately, this project is an effort to increase the quality of life for all stakeholders, while improving the capacity, throughput, and effectiveness of a necessary process at Y-12.

42 ENGINEERING↗
DOE OSTI2019

Juxtatumoral perinephric fat analysis in clear cell renal cell carcinoma

Purpose: The purpose of the study was to evaluate the feasibility of using contrast-enhanced computed tomography (CECT)-based texture analysis (CTTA) metrics to differentiate between juxtatumoral perinephric fat (JPF) surrounding low-grade (ISUP 1–2) versus high-grade (ISUP 3–4) clear cell renal cell carcinoma (ccRCC). Methods: In this IRB-approved study, we retrospectively queried the surgical database between June 2009 and April 2016 and identified 83 patients with pathologically confirmed ccRCC (low grade: n = 54, mean age = 61.5 years, 18F/35M; high grade n = 30, mean age = 61.7 years, 8F/22M) who also had pre-operative multiphase CT acquisitions. CT images were transferred to a 3D workstation, and nephrographic phase JPF regions were manually segmented. Using an in-house developed Matlab program, a CTTA panel comprising of texture metrics extracted using six different methods, histogram, 2D- and 3D-Gray-level co-occurrence matrix (GLCM) and Gray-level difference matrix (GLDM), and 2D-Fast Fourier Transform (FFT) analyses, was applied to the segmented images to assess JPF textural heterogeneity in low- versus high-grade ccRCC. Univariate analysis and receiver-operator characteristics (ROC) analysis were used to assess interclass differences in texture metrics and their prediction accuracy, respectively. Results: All methods except GLCM consistently revealed increased heterogeneity in the JPF surrounding high- versus low-grade ccRCC. FFT showed increased complexity index (p < 0.01). Histogram analysis showed increased kurtosis and positive skewness in (p < 0.03), and GLDM analysis showed decreased measure of correlation coefficient (MCC) (p < 0.04). Several of the GLCM metrics showed statistically significant (p < 0.04) textural differences between the two groups, but with no consistent trend. ROC analysis showed that MCC in GLCM analysis had an area under the curve of 0.75. Conclusions: Our study suggests that CTTA of ccRCC shows statistically significant textural differences in JPF surrounding high- versus low-grade ccRCC.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2016

The report of Task Group 100 of the AAPM: Application of risk analysis methods to radiation therapy quality management

The increasing complexity of modern radiation therapy planning and delivery challenges traditional prescriptive quality management (QM) methods, such as many of those included in guidelines published by organizations such as the AAPM, ASTRO, ACR, ESTRO, and IAEA. These prescriptive guidelines have traditionally focused on monitoring all aspects of the functional performance of radiotherapy (RT) equipment by comparing parameters against tolerances set at strict but achievable values. Many errors that occur in radiation oncology are not due to failures in devices and software; rather they are failures in workflow and process. A systematic understanding of the likelihood and clinical impact of possible failures throughout a course of radiotherapy is needed to direct limit QM resources efficiently to produce maximum safety and quality of patient care. Task Group 100 of the AAPM has taken a broad view of these issues and has developed a framework for designing QM activities, based on estimates of the probability of identified failures and their clinical outcome through the RT planning and delivery process. The Task Group has chosen a specific radiotherapy process required for “intensity modulated radiation therapy (IMRT)” as a case study. The goal of this work is to apply modern risk-based analysis techniques to this complex RT process in order to demonstrate to the RT community that such techniques may help identify more effective and efficient ways to enhance the safety and quality of our treatment processes. The task group generated by consensus an example quality management program strategy for the IMRT process performed at the institution of one of the authors. This report describes the methodology and nomenclature developed, presents the process maps, FMEAs, fault trees, and QM programs developed, and makes suggestions on how this information could be used in the clinic. The development and implementation of risk-assessment techniques will make radiation therapy safer and more efficient.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Cobalt(II) complexes with bis(N-imidazolyl/benzimidazolyl) pyridazine: Structures, photoluminescent and photocatalytic properties

Six new Co{sup II} complexes [Co(L{sup 1}){sub 4}(OH){sub 2}] (1), {[Co(L"1)(H_2O)_4]·2ClO_4}{sub ∞} (2), {[Co(L"1)(H_2O)_4]·SiF_6}{sub ∞} (3), {[Co(L"1)_3]·2ClO_4}{sub ∞} (4), [Co(L{sup 2})Cl{sub 2}]{sub ∞} (5) and {[Co(L"2)_2]·SiF_6}{sub ∞} (6) [L{sup 1}=3,6-bis(N-imidazolyl) pyridazine, L{sup 2}=3,6-bis (N-benzimidazolyl) pyridazine] have been synthesized and characterized by elemental analysis, IR spectra and single crystal X-ray diffraction. Complex 1 has a mononuclear structure, while complexes 2 and 3 have 1-D chain structures. Considering the Co{sup II} centers were linked by the L{sup 1} ligands, the 3-D framework of complex 4 can be rationalized to be a {4^12.6^3} 6-c topological net with the stoichiometry uninodal net. 5 reveals a coordination 1-D zigzag chain structure consisting of a neutral chain [Co(L{sup 2})Cl{sub 2}]{sub n} with the Co{sup II} centers. Complex 6 has a rhombohedral grid with a (4, 4) topology. The TGA property, fluorescent property and photocatalytic activity of complexes 1–6 have been investigated and discussed. - Graphical abstract: Six Co{sup II} complexes of bis(N-imidazolyl/benzimidazolyl)pyridazine were synthesized and structurally characterized. The fluorescence properties and photocatalytic activity for dye degradation under UV light of all complexes have been investigated and discussed. Display Omitted - Highlights: • Six new Co{sup II} complexes with bis(N-imidazolyl/benzimidazolyl) pyridazine. • Structural analysis of all complexes. • Fluorescent property of all complexes. • Photocatalytic activity for dye degradation under UV light of all complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

The benzene⋯naphthalene complex: A more challenging system than the benzene dimer for newly developed computational methods

High-level coupled cluster singles, doubles, and perturbative triples [CCSD(T)] computations with up to the aug-cc-pVQZ basis set (1924 basis functions) and various extrapolations toward the complete basis set (CBS) limit are presented for the sandwich, T-shaped, and parallel-displaced benzene⋯naphthalene complex. Using the CCSD(T)/CBS interaction energies as a benchmark, the performance of some newly developed wave function and density functional theory methods has been evaluated. The best performing methods were found to be the dispersion-corrected PBE0 functional (PBE0-D3) and spin-component scaled zeroth-order symmetry-adapted perturbation theory (SCS-SAPT0). The success of SCS-SAPT0 is very encouraging because it provides one method for energy component analysis of π-stacked complexes with 200 atoms or more. Most newly developed methods do, however, overestimate the interaction energies. The results of energy component analysis show that interaction energies are overestimated mainly due to the overestimation of dispersion energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Kinetic Analysis of Proton-Coupled Electron Transfer at an Electrode-Immobilized Complex

An alkyne-terminated cobalt complex, [Co(Cp)(dppe ≡H )(Cl)] + (Cp = cyclopentadienyl; dppe ≡H = 1,2-bis-(di-(4-ethynyl-phenyl)phosphino)ethane), (Co ≡H ) was immobilized onto a glassy carbon electrode using two attachment strategies: Cu(I) catalyzed azide–alkyne click chemistry and reductive electropolymerization. The modified electrodes prepared through reductive electropolymerization exhibit current densities and peak resolutions for the electrochemical reduction of the cobalt species, which are amenable to electroanalytical quantification of coupled chemical reactions. Through peak shift analysis of cyclic voltammograms recorded in the presence of 4-chloroanilinium tetrafluoroborate, we quantified the proton transfer rate constant for the stepwise proton-coupled electron transfer reaction that reduces the electrode-immobilized [Co(Cp)(dppe ≡H )(Cl)] + to [H–Co(Cp)(dppe ≡H )] + (k PT app = (9.3 ± 1.8) × 10 5 M –1 s –1 ). In conclusion, the extraction of kinetic parameters for an elementary proton-coupled electron transfer reaction of an electrode-immobilized complex represents the first experimental measurement of its type and lays crucial groundwork for kinetic analyses of hybrid catalyst–electrode architectures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Development and case study of the liquid desiccant system module in sorption system simulation program (SorpSim)

Liquid desiccant systems (LDS) have recently seen an increase in research interest as they can utilize low-grade heat resources and separate the sensible and latent cooling loads by efficiently removing moisture in the air without cooling it to the dew point. Yet, simulation and analysis of LDS had remained complex and demanding due to the limited resources of LDS simulation tools. This work presents the new LDS module developed in the Sorption system Simulation program (SorpSim), which is an open-source and flexible platform for steady-state simulation and analysis of various sorption systems. First, the new LDS module containing a finite-difference model and an effectiveness-NTU model for the heat and mass transfer in LDS dehumidifier/regenerator component was introduced. Then the simulation results of the new module were verified using data from the literature. Lastly, a case study was carried out in SorpSim where an LDS cycle was built and simulated using the new module. The impacts of design and operating parameters on the simulated LDS performance were investigated. The parametric study revealed that a high source temperature improved moisture removal rate (MRR) but reduced the system coefficient of performance (COP); the COP increased monotonically with the desiccant solution recirculation ratio, while the MRR peaked at a ratio of 85%; and an internal solution heat exchanger with UA of 800 W/K was found to be sufficient for optimal performance under high recirculation ratios. The case study demonstrated the LDS module’s capability to facilitate the analysis of LDS design and operation. The LDS module can be further coupled with other component models in SorpSim to simulate and analyze various liquid-desiccant-based systems.

42 ENGINEERING↗
DOE OSTI2021

Fast ion transport by sawtooth instability in the presence of ICRF-NBI synergy in JET plasmas

JET experiments have shown that the three-ion scenarios using waves in the ion cyclotron range of frequencies (ICRF) is an efficient way to build fast ion population through beam ion acceleration by radio frequency (RF) waves. Here, such a heating scheme is applied to plasmas with at least two thermal ion species. Analysis of mixed discharges with complex heating schemes requires a workflow that allows to model thermal and fast ion transport consistently. This paper is dedicated to modelling of a mixed plasma discharge with significant fraction of fast ions and contributes to development of fast ion transport models. For interpretive analysis with the TRANSP code a JET hydrogen-deuterium (HD) plasma discharge with neutral beam injection (NBI) and ICRF heating has been chosen. The task is complicated by NBI-ICRF synergy and plasma magnetohydrodynamic activity, like sawtooth crashes. D beam ions accelerated by RF waves form a high energy tail in fast ion distribution. Significant difference between the neutron rate computed by TRANSP and measured one is observed if the same diffusivity for electrons and ions is assumed. Sensitivity studies show that uncertainties in input plasma parameters and thermal ion transport models are crucial for modelling mixed plasma discharges and increased D transport is required to reach the plasma composition consistent with diagnostic measurements at the plasma edge. Fast ion redistribution by a sawtooth instability is characterised by non-resonant transport due to reconnection of magnetic field lines and resonant transport caused by resonance interaction between the instability and fast ions. With ORBIT simulations it has been shown that resonant interaction strongly affects fast ions of high energies, like beam ions accelerated by RF waves and fusion products. For the considered case, fast ion profiles simulated by ORBIT remain peaked after the sawtooth crashes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Visualization and Analysis for Near-Real-Time Decision Making in Distributed Workflows

Data driven science is becoming increasingly more common, complex, and is placing tremendous stresses on visualization and analysis frameworks. Data sources producing 10GB per second (and more) are becoming increasingly commonplace in both simulation, sensor and experimental sciences. These data sources, which are often distributed around the world, must be analyzed by teams of scientists that are also distributed. Enabling scientists to view, query and interact with such large volumes of data in near-real-time requires a rich fusion of visualization and analysis techniques, middleware and workflow systems. Here, this paper discusses initial research into visualization and analysis of distributed data workflows that enables scientists to make near-real-time decisions of large volumes of time varying data.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Reactivity of bio-inspired Cu(II) (N2/Py2) complexes with peroxide at room temperature

Developing coordination complexes of earth abundant metals that can perform substrate oxidations under benign conditions is an ongoing challenge. Here, the reactivity of two mononuclear Cu-complexes toward the oxidant H 2 O 2 is reported. Both complexes displayed ligand oxidation upon reaction with the oxidant. Analysis of spectroscopic data established that the respective product complexes contained mononuclear Cu(II) centers. Moreover, treatment of these Cu-complexes with oxidant in the presence of substrate resulted in the interception of ligand oxidation with preferential oxidation of the substrate. Computational studies identified plausible mechanistic pathways, suggesting a copper-oxyl intermediate as the likely reactive intermediate responsible for substrate and ligand oxidation. To our knowledge, this is the first Cu-mediated system that showed ligand oxidation, oxo-transfer capability, and external hydrocarbon oxidation under stoichiometric conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Single-Cell Analysis Using Hyperspectral Imaging Modalities

Almost a decade ago, hyperspectral imaging (HSI) was employed by the NASA in satellite imaging applications such as remote sensing technology. This technology has since been extensively used in the exploration of minerals, agricultural purposes, water resources, and urban development needs. Due to recent advancements in optical re-construction and imaging, HSI can now be applied down to micro- and nanometer scales possibly allowing for exquisite control and analysis of single cell to complex biological systems. Here this short review provides a description of the working principle of the HSI technology and how HSI can be used to assist, substitute, and validate traditional imaging technologies. This is followed by a description of the use of HSI for biological analysis and medical diagnostics with emphasis on single-cell analysis using HSI.

spectral angle mapping↗
DOE OSTI2019

State-based network similarity visualization

We introduce an approach for the interactive visual analysis of weighted, dynamic networks. These networks arise in areas such as computational neuroscience, sociology, and biology. Network analysis remains challenging due to complex time-varying network behavior. For example, edges disappear/reappear, communities grow/vanish, or overall network topology changes. Our technique, TimeSum, detects the important topological changes in graph data to abstract the dynamic network and visualize one summary representation for each temporal phase, a state. We define a network state as a graph with similar topology over a specific time interval. To enable a holistic comparison of networks, we use a difference network to depict edge and community changes. Here, we present case studies to demonstrate that our methods are effective and useful for extracting and exploring complex dynamic behavior of networks.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2018

Quantification of Coexisting Inner- and Outer-Sphere Complexation of Sulfate on Hematite Surfaces

Sulfate adsorption on hematite surfaces controls sulfate mobility and environmental behavior but whether sulfate forms both inner- and outer-sphere complexes and the type of the inner-sphere complexes remain contentious. With ionic strength tests and S K-edge X-ray absorption near-edge structure spectroscopy, we show that sulfate forms both outer- and inner-sphere complexes on hematite surfaces. Both S K-edge extended X-ray absorption fine structure spectroscopy and the differential pair distribution function analyses determine the S–Fe interatomic distance (~3.24 Å) of the inner-sphere complex, suggesting bidentate-binuclear complexation. A multivariate curve resolution (MCR) analysis of the attenuated total reflection–Fourier-transform infrared spectra of adsorption envelope samples shows that increasing ionic strength does not affect the inner-sphere but decreases the outer-sphere complex adsorption loading, consistent with the ionic strength effect. The extended triple layer model directly and successfully models the MCR-derived inner- and outer-sphere surface loadings at various ionic strengths, indicating weaker sulfate inner-sphere complexation on hematite than on ferrihydrite surfaces. Results also show that sample drying, lower pH, and higher ionic strength all favor sulfate inner-sphere complexation, but the hematite particle size does not affect the relative proportions of the two types of complexes. Sulfate adsorption kinetics show increasing ratio of exchanged OH– to adsorbed sulfate with time, attributed to inner- and outer-sphere complexation dominating at different adsorption stages and to the changes of the relative abundance of surface OH – and H 2 O groups with time. This work clarifies sulfate adsorption mechanisms on hematite and has implications for understanding sulfate availability, behavior and fate in the environment. Our work suggests that the simple macroscopic ionic strength test correlates well with directly measured outer-sphere complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Characterization of a novel aromatic substrate-processing microcompartment in Actinobacteria

ABSTRACT We have discovered a new cluster of genes that is found exclusively in the Actinobacteria phylum. This locus includes genes for the 2-aminophenol meta -cleavage pathway and the shell proteins of a bacterial microcompartment (BMC) and has been named aromatics (ARO) for its putative role in the breakdown of aromatic compounds. In this study, we provide details about the distribution and composition of the ARO BMC locus and conduct phylogenetic, structural, and functional analyses of the first two enzymes in the catabolic pathway: a unique 2-aminophenol dioxygenase, which is exclusively found alongside BMC shell genes in Actinobacteria, and a semialdehyde dehydrogenase, which works downstream of the dioxygenase. Genomic analysis reveals variations in the complexity of the ARO loci across different orders. Some loci are simple, containing shell proteins and enzymes for the initial steps of the catabolic pathway, while others are extensive, encompassing all the necessary genes for the complete breakdown of 2-aminophenol into pyruvate and acetyl-CoA. Furthermore, our analysis uncovers two subtypes of ARO BMC that likely degrade either 2-aminophenol or catechol, depending on the presence of a pathway-specific gene within the ARO locus. The precise precursor of 2-aminophenol, which serves as the initial substrate and/or inducer for the ARO pathway, remains unknown, as our model organism Micromonospora rosaria cannot utilize 2-aminophenol as its sole energy source. However, using enzymatic assays, we demonstrate the dioxygenase’s ability to cleave both 2-aminophenol and catechol in vitro , in collaboration with the aldehyde dehydrogenase, to facilitate the rapid conversion of these unstable and toxic intermediates. IMPORTANCE Bacterial microcompartments (BMCs) are proteinaceous organelles that are widespread among bacteria and provide a competitive advantage in specific environmental niches. Studies have shown that the genetic information necessary to form functional BMCs is encoded in loci that contain genes encoding shell proteins and the enzymatic core. This allows the bioinformatic discovery of BMCs with novel functions and expands our understanding of the metabolic diversity of BMCs. ARO loci, found only in Actinobacteria, contain genes encoding for phylogenetically remote shell proteins and homologs of the meta -cleavage degradation pathway enzymes that were shown to convert central aromatic intermediates into pyruvate and acetyl-CoA in gamma Proteobacteria. By analyzing the gene composition of ARO BMC loci and characterizing two core enzymes phylogenetically, structurally, and functionally, we provide an initial functional characterization of the ARO BMC, the most unusual BMC identified to date, distinctive among the repertoire of studied BMCs.

2-AP 1,6-dioxygenase↗
DOE OSTI2015

Elucidating the structure of the magnesium aluminum chloride complex electrolyte for magnesium-ion batteries

Non-aqueous Mg-ion batteries offer a promising way to overcome safety, costs, and energy density limitations of state-of-the-art Li-ion battery technology. Here, we present a rigorous analysis of the magnesium aluminum chloride complex (MACC) in tetrahydrofuran (THF), one of the few electrolytes that can reversibly plate and strip Mg. We use ab initio calculations and classical molecular dynamics simulations to interrogate the MACC electrolyte composition with the goal of addressing two urgent questions that have puzzled battery researchers: (i) the functional species of the electrolyte, and (ii) the complex equilibria regulating the MACC speciation after prolonged electrochemical cycling, a process termed as conditioning, and after prolonged inactivity, a process called aging. A general computational strategy to untangle the complex structure of electrolytes, ionic liquids and other liquid media is presented. The analysis of formation energies and grand-potential phase diagrams of Mg–Al–Cl–THF suggests that the MACC electrolyte bears a simple chemical structure with few simple constituents, namely the electro-active species MgCl + and AlCl 4 - in equilibrium with MgCl 2 and AlCl 3 . Knowledge of the stable species of the MACC electrolyte allows us to determine the most important equilibria occurring during electrochemical cycling. We observe that Al deposition is always preferred to Mg deposition, explaining why freshly synthesized MACC cannot operate and needs to undergo preparatory conditioning. Similarly, we suggest that aluminum displacement and depletion from the solution upon electrolyte resting (along with continuous MgCl 2 regeneration) represents one of the causes of electrolyte aging. Finally, we compute the NMR shifts from shielding tensors of selected molecules and ions providing fingerprints to guide future experimental investigations.

25 ENERGY STORAGE↗
DOE OSTI2025

Demystifying the Resilience of Large Language Models: An End-to-End Perspective

Deep neural networks are known to be resilient to random bit-wise faults in their parameters. However, this resilience has primarily been established through evaluations of classification models. The extent to which this claim holds for large-language models remains underexplored. In this work, we conduct an extensive measurement study on the impact of random bitwise faults in commercial-scale language models. We perform an in-depth analysis of the resulting generation outputs. We first expose that these language models are not truly resilient to random bit-flips. While aggregate metrics such as accuracy may suggest resilience, an in-depth inspection of the generated outputs shows significant degradation in text quality. Our analysis also shows that tasks requiring more complex reasoning suffer more from performance and quality degradation. Moreover, we extend our analysis to models with augmented reasoning capabilities, such as Chain-of-Thought or Mixture of Experts architectures, and characterize their failure scenarios under random bit-flips.

Sun, Yu↗
DOE OSTI2018

Launching and controlling Gaussian beams from point sources via planar transformation media

Based on operations prescribed under the paradigm of Complex Transformation Optics (CTO) [1- 4], it was recently shown in [5] that a complex source point (CSP) can be mimicked by a paritytime transformation media. Such coordinate transformation has a mirror symmetry and results a balanced loss/gain metamaterial slab. A point source placed at the center of such slab produces a Gaussian beam propagating away from the slab surface. Here, we extend the CTO analysis to non-symmetric complex coordinate transformations and show that by using simply a (homogeneous) doubly anisotropic gain-media metamaterial slab, one can still mimic a CSP and produce Gaussian beam. Notably, a Gaussian beam can be produced in this case by point sources placed outside the slab as well. By making use of the extra degrees of freedom provided by CTO, the near-zero requirement on the real part of the resulting constitutive parameters can be relaxed to facilitate potential realization. In addition, exploitation of both real and imaginary parts of the CTO design yield direct control of the Gaussian beam properties such as peak amplitude and waist (focus) location.

74 ATOMIC AND MOLECULAR PHYSICS↗