Search NASA⌕ Search

SEARCH · Search NASA

Results for “data processing methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Using the HARV simulation aerodynamic model to determine forebody strake aerodynamic coefficients from flight data

The method described in this report is intended to present an overview of a process developed to extract the forebody aerodynamic increments from flight tests. The process to determine the aerodynamic increments (rolling pitching, and yawing moments, Cl, Cm, Cn, respectively) for the forebody strake controllers added to the F/A - 18 High Alpha Research Vehicle (HARV) aircraft was developed to validate the forebody strake aerodynamic model used in simulation.

Messina, Michael D.↗
NASA NTRS2000

Method and device for maximizing memory system bandwidth by accessing data in a dynamically determined order

A data processing system is disclosed which comprises a data processor and memory control device for controlling the access of information from the memory. The memory control device includes temporary storage and decision ability for determining what order to execute the memory accesses. The compiler detects the requirements of the data processor and selects the data to stream to the memory control device which determines a memory access order. The order in which to access said information is selected based on the location of information stored in the memory. The information is repeatedly accessed from memory and stored in the temporary storage until all streamed information is accessed. The information is stored until required by the data processor. The selection of the order in which to access information maximizes bandwidth and decreases the retrieval time.

Wulf, William A.↗
NASA NTRS2018

Systems and Methods for Advanced Rapid Imaging and Analysis for Earthquakes

Many embodiments provide a hybrid data processing system (HySDS) of an end-to-end geodetic imaging data system enabling near-real-time science, assessment, response, and rapid recovery. The HySDS may be an operation data processing system that integrates data from many different geodetic data sources and/or sensors, including interferometric synthetic aperture radar (InSAR), GPS, pixel tracking, seismology, and/or modeling, and processes the data to generate actionable high quality science data products. The HySDS may provide for an automated imaging and analysis capabilities that is able to handle the imminent increases in raw data from new and existing geodetic monitoring sensor systems.

Owen, Susan Ethel↗
NASA NTRS1972

Interhemispheric comparison of atmospheric circulation features as evaluated from Nimbus satellite data

The report includes a complete analyses of O3 data inferred from Nimbus-3 measurements, a discussion of future areas of study, description of the regression and inversion methods developed to infer atmospheric temperature and tropopause characteristics, as well as the plan to process the satellite data for a systematic study of the relative circulation differences between Northern and Southern Hemispheres.

Reiter, E. R.↗
NASA NTRS1972

Numerical methods for reduction of topside ionograms

Several alternative methods for solving the group height equation are presented. Three of these are now in operation at Ames Research Center and use data contained in a single ionogram trace. From the data an electron density profile N(h) is computed. If the ionogram also exhibits other traces, reverse ionogram traces are computed, using the N(h) profile, for comparison with the redundant data. When agreement is poor, the initial data trace is reinterpreted, another N(h) profile computed, and the reverse traces generated once again. This process is repeated until a desired degree of consistency is achieved. To reduce the necessity for human intervention and eliminate decision making required in conjunction with the preceding methods, a method is proposed that accepts as input, all data from a single ionogram. In general, no electron density function will satisfy these data exactly, but a best N(h) profile can be computed. Finally, a method is described that eliminates the need to assume that the ionosphere is spherically stratified. Horizontal gradients in electron density are detected and accounted for by processing several ionograms from the same satellite pass simultaneously. This idea is derived as an extension of one of the basic methods.

Mcculley, L.↗
NASA NTRSDate not supplied

Role of NDE and In-Situ Process Monitoring in Managing Risk of AM Space Hardware

The recently published NASA-STD-6030 defines the Additive Manufacturing (AM) Requirements for Spaceflight Systems. Key aspects of the certification approach include the development of a qualified material process (QMP) and material characterization determined by part classification. Nondestructive evaluation (NDE) of the full surface and volume is required for all part classifications except those with negligible risk. NASA is exploring the use of in-process monitoring data to improve risk posture and supplement post-build inspection for complex parts. Currently, the most challenging obstacle to overcome is linking the indications in the monitoring data to the physics of the process and the final material state of the finished part. NASA is undertaking studies to understand and quantify this relationship for various monitoring methods. The desired goal is to develop a protocol to establish this correlation for any monitoring method. Once this correlation is known, the critical defect size can be linked to a representative indication in the monitoring data, and the capability of the monitoring system can be tested using the 90/95 probability of detection requirement for NDE methods. This would enable the use of in-process monitoring as a defect screening activity for AM part certification. Many high-criticality components built with AM have high complexity and therefore limited inspectability, so using in-process monitoring can help address this certification gap. The use of adaptive, closed-loop monitoring systems that alter the locked process will require a new approach to the QMP.

additive manufacturing↗
NASA NTRSDate not supplied

Role of NDE and In-Situ Process Monitoring in Managing Risk of AM Space Hardware

The recently published NASA-STD-6030 defines the Additive Manufacturing (AM) Requirements for Spaceflight Systems. Key aspects of the certification approach include the development of a qualified material process (QMP) and material characterization determined by part classification. Nondestructive evaluation (NDE) of the full surface and volume is required for all part classifications except those with negligible risk. NASA is exploring the use of in-process monitoring data to improve risk posture and supplement post-build inspection for complex parts. Currently, the most challenging obstacle to overcome is linking the indications in the monitoring data to the physics of the process and the final material state of the finished part. NASA is undertaking studies to understand and quantify this relationship for various monitoring methods. The desired goal is to develop a protocol to establish this correlation for any monitoring method. Once this correlation is known, the critical defect size can be linked to a representative indication in the monitoring data, and the capability of the monitoring system can be tested using the 90/95 probability of detection requirement for NDE methods. This would enable the use of in-process monitoring as a defect screening activity for AM part certification. Many high-criticality components built with AM have high complexity and therefore limited inspectability, so using in-process monitoring can help address this certification gap. The use of adaptive, closed-loop monitoring systems that alter the locked process will require a new approach to the QMP.

advanced manufacturing↗
DOE OSTI2024

Human Host Cellular Response to HCoV-229E Infection Proteomics (ACS-JM-DP2)

The purpose of this experiment was to evaluate the human host cellular response to wild-type Human coronavirus strain 229E (HCoV-229E) infection. Sample data was obtained for mock and infected immortalized human lung epithelial cells (A549) (MOI 5) nuclear extracts, immortalized human lung fibroblasts cells (MRC5) (MOI5) nuclear extracts, and primary human airway epithelial (HAE) (MOI 3) cells from lung tissue and processed for proteome analysis. Processed datasets are openly accessible from the download button and contain secondary processed proteomic results files and supporting metadata materials. Experimental proteomics samples were prepared using Limited Proteolysis (LiP) methods for Label-free quantification (LFQ) and global proteomic evaluation. Sample data was acquired using a Q-Exactive HF-X mass spectrometer and was processed and compiled using MaxQuant software (v.1.6.17.0). Processed proteomic data downloads include a sample naming key, processed MaxQuant results/parameters, and protein annotated relative abundance files. See corresponding primary data accessions below and Viral Experiment LiP Analysis source code supporting data transparency and reuse. Experimental transcriptomics samples were collected in parallel and processed for RNA sequencing (RNA-Seq) as summarized under ACS-DP1 (https://data.pnnl.gov/group/nodes/dataset/34069).

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1971

Implementation of radiation shielding calculation methods. Volume 1: Synopsis of methods and summary of results

The work performed in the following areas is summarized: (1) Analysis of Realistic nuclear-propelled vehicle was analyzed using the Marshall Space Flight Center computer code package. This code package includes one and two dimensional discrete ordinate transport, point kernel, and single scatter techniques, as well as cross section preparation and data processing codes, (2) Techniques were developed to improve the automated data transfer in the coupled computation method of the computer code package and improve the utilization of this code package on the Univac-1108 computer system. (3) The MSFC master data libraries were updated.

Capo, M. A.↗
NASA NTRS1993

Processing parameters associated with scale-up of balloon film production

A method is set forth for assessing strain-rate profiles that can be used to develop a scale-up theory for blown-film extrusion. Strain rates are evaluated by placing four ink dots on the stalk of an extruded bubble to follow the displacements of the dots as a function of time. The instantaneous Hencky strain is obtained with the displacement data and plotted for analysis. Specific attention is given to potential sources of error in the distance measurements and corrections for these complex bubble geometries. The method is shown to be effective for deriving strain-rate data related to different processing parameters for the production of balloon film. The strain rates can be compared to frostline height, blow-up ratio, and take-up ratio to optimize these processing variables.

Simpson, D. M.↗
NASA NTRS2005

Retrieving Storm Electric Fields From Aircraft Field Mill Data. Part I: Theory

It is shown that the problem of retrieving storm electric fields from an aircraft instrumented with several electric field mill sensors can be expressed in terms of a standard Lagrange multiplier optimization problem. The method naturally removes aircraft charge from the retrieval process without having to use a high voltage stinger and linearly combined mill data values. It also allows a variety of user-supplied physical constraints (the so-called side constraints in the theory of Lagrange multipliers). Additionally, this paper introduces a novel way of performing the absolute calibration of an aircraft that has several benefits over conventional analyses. In the new approach, absolute calibration is completed by inspecting the time derivatives of mill and pitch data for a pitch down maneuver performed at high (greater than 1 km) altitude. In Part II of this study, the above methods are tested and then applied to complete a full calibration of a Citation aircraft.

Koshak, W. J.↗
NASA NTRS2006

Retrieving Storm Electric Fields from Aircraft Field Mill Data: Theory - Part 1

It is shown that the problem of retrieving storm electric fields from an aircraft instrumented with several electric field mill sensors can be expressed in terms of a standard Lagrange multiplier optimization problem. The method naturally removes aircraft charge from the retrieval process without having to use a high voltage stinger and linearly combined mill data values. It allows a variety of user-supplied physical constraints (the so-called side constraints in the theory of Lagrange multipliers) and also helps improve absolute calibration. Additionally, this paper introduces an alternate way of performing the absolute calibration of an aircraft that has some benefits over conventional analyses. It is accomplished by using the time derivatives of mill and pitch data for a pitch down maneuver performed at high (greater than 1 km) altitude. In Part II of this study, the above methods are tested and then applied to complete a full calibration of a Citation aircraft.

Koshak, W. J.↗
NASA NTRS1973

Signature extension: An approach to operational multispectral surveys

Two data processing techniques were suggested as applicable to the large area survey problem. One approach was to use unsupervised classification (clustering) techniques. Investigation of this method showed that since the method did nothing to reduce the signal variability, the use of this method would be very time consuming and possibly inaccurate as well. The conclusion is that unsupervised classification techniques of themselves are not a solution to the large area survey problem. The other method investigated was the use of signature extension techniques. Such techniques function by normalizing the data to some reference condition. Thus signatures from an isolated area could be used to process large quantities of data. In this manner, ground information requirements and computer training are minimized. Several signature extension techniques were tested. The best of these allowed signatures to be extended between data sets collected four days and 80 miles apart with an average accuracy of better than 90%.

Nalepka, R. F.↗
DOE OSTI2026

Validating and Comparing Energy Estimation Methods at Water Resource Recovery Facilities

Water resource recovery facilities play a crucial role in the water-energy nexus, consuming a substantial amount of energy in the United States. Growing treatment volumes and more stringent water quality standards are expected to increase the amount of energy needed to treat wastewater, but accurately estimating energy consumption and potential remains challenging due to variability in scale, treatment methods, and effluent treatment standards. In this study, we used publicly available data to evaluate the accuracy of methods for estimating energy consumption and generation, then quantified uncertainty based on key factors like flow rate, treatment level, and geographic location. To validate methods, we estimated energy consumption and generation at the facility-level, then compared estimates to self-reported data from utilities in major U.S. cities. We found that process models of treatment trains under best practice configurations were accurate relative to other methods for estimating electricity use, total energy use, and electricity generation from biogas utilization, and less complex methods based on effluent treatment level and prime movers also performed well for estimating electricity consumption and generation, respectively. Applying the evaluated methods to a national inventory of treatment facilities, we estimate that annual energy consumption ranged from 56.3 x 10^3 to 82.5 x 10^3 TJ in 2012 and 83.6 x 10^3 to 127 x 10^3 TJ in 2042. Our results indicate that not all estimation methods are suited for every use case, so we recommend that researchers and practitioners select an estimation method based on data availability and desired computational intensity.

Hodson, Abigayle↗
NASA NTRS2002

Prediction of Aerodynamic Coefficient using Genetic Algorithm Optimized Neural Network for Sparse Data

Wind tunnels use scale models to characterize aerodynamic coefficients, Wind tunnel testing can be slow and costly due to high personnel overhead and intensive power utilization. Although manual curve fitting can be done, it is highly efficient to use a neural network to define the complex relationship between variables. Numerical simulation of complex vehicles on the wide range of conditions required for flight simulation requires static and dynamic data. Static data at low Mach numbers and angles of attack may be obtained with simpler Euler codes. Static data of stalled vehicles where zones of flow separation are usually present at higher angles of attack require Navier-Stokes simulations which are costly due to the large processing time required to attain convergence. Preliminary dynamic data may be obtained with simpler methods based on correlations and vortex methods; however, accurate prediction of the dynamic coefficients requires complex and costly numerical simulations. A reliable and fast method of predicting complex aerodynamic coefficients for flight simulation I'S presented using a neural network. The training data for the neural network are derived from numerical simulations and wind-tunnel experiments. The aerodynamic coefficients are modeled as functions of the flow characteristics and the control surfaces of the vehicle. The basic coefficients of lift, drag and pitching moment are expressed as functions of angles of attack and Mach number. The modeled and training aerodynamic coefficients show good agreement. This method shows excellent potential for rapid development of aerodynamic models for flight simulation. Genetic Algorithms (GA) are used to optimize a previously built Artificial Neural Network (ANN) that reliably predicts aerodynamic coefficients. Results indicate that the GA provided an efficient method of optimizing the ANN model to predict aerodynamic coefficients. The reliability of the ANN using the GA includes prediction of aerodynamic coefficients to an accuracy of 110% . In our problem, we would like to get an optimized neural network architecture and minimum data set. This has been accomplished within 500 training cycles of a neural network. After removing training pairs (outliers), the GA has produced much better results. The neural network constructed is a feed forward neural network with a back propagation learning mechanism. The main goal has been to free the network design process from constraints of human biases, and to discover better forms of neural network architectures. The automation of the network architecture search by genetic algorithms seems to have been the best way to achieve this goal.

Rajkumar, T.↗
NASA NTRS1988

Hydrologic models for land-atmosphere retrospective studies of the use of LANDSAT and AVHRR data

The use of a Geographic Information System (GIS) and LANDSAT analysis in conjunction with the Simulator for Water Resources on a Rural Basin (SWRRB) hydrologic model to examine the water balance on the Little Washita River basin is discussed. LANDSAT analysis was used to divide the basin into eight non-contiguous land covers or subareas: rangeland, grazed range, winter wheat, alfalfa/pasture, bare soil, water, woodland, and impervious land (roads, quarry). The use of a geographic information system allowed for the calculation of SWRRB model parameters in each subarea. Four data sets were constructed in order to compare SWRRB estimates of hydrologic processes using two methods of maximum LAI and two methods of watershed subdivision. Maximum LAI was determined from a continental scale map, which provided a value of 4.5 for the entire basin, and from its association with the type of land-cover (eight values). The two methods of watershed subdivision were determined according to drainage subbasin (four) and the eight land-covers. These data sets were used with the SWRRB model to obtain daily hydrologic estimates for 1985. The results of the one year analysis lead to the conclusion that the greater homogeneity of a land-cover subdivision provides better water yield estimates than those based on a drainage properties subdivision.

Duchon, Claude E.↗
NASA NTRS1992

Teamwork for Oversight of Processes and Systems (TOPS). Implementation guide for TOPS version 2.0, 10 August 1992

As the nation redefines priorities to deal with a rapidly changing world order, both government and industry require new approaches for oversight of management systems, particularly for high technology products. Declining defense budgets will lead to significant reductions in government contract management personnel. Concurrently, defense contractors are reducing administrative and overhead staffing to control costs. These combined pressures require bold approaches for the oversight of management systems. In the Spring of 1991, the DPRO and TRW created a Process Action Team (PAT) to jointly prepare a Performance Based Management (PBM) system titled Teamwork for Oversight of Processes and Systems (TOPS). The primary goal is implementation of a performance based management system based on objective data to review critical TRW processes with an emphasis on continuous improvement. The processes are: Finance and Business Systems, Engineering and Manufacturing Systems, Quality Assurance, and Software Systems. The team established a number of goals: delivery of quality products to contractual terms and conditions; ensure that TRW management systems meet government guidance and good business practices; use of objective data to measure critical processes; elimination of wasteful/duplicative reviews and audits; emphasis on teamwork--all efforts must be perceived to add value by both sides and decisions are made by consensus; and synergy and the creation of a strong working trust between TRW and the DPRO. TOPS permits the adjustment of oversight resources when conditions change or when TRW systems performance indicate either an increase or decrease in surveillance is appropriate. Monthly Contractor Performance Assessments (CPA) are derived from a summary of supporting system level and process-level ratings obtained from objective process-level data. Tiered, objective, data-driven metrics are highly successful in achieving a cooperative and effective method of measuring performance. The teamwork-based culture developed by TOPS proved an unequaled success in removing adversarial relationships and creating an atmosphere of continuous improvement in quality processes at TRW. The new working relationship does not decrease the responsibility or authority of the DPRO to ensure contract compliance and it permits both parties to work more effectively to improve total quality and reduce cost. By emphasizing teamwork in developing a stronger approach to efficient management of the defense industrial base TOPS is a singular success.

Strand, Albert A.↗
NASA NTRS1975

The Screwworm Eradication Data System (SEDS)

One of the objectives of the SEDS was to build a versatile, yet economical, interactive system on the existing digital PDP 11/45 computers used in the Skylab production processing system. Previous experience on various interactive systems gave some background in the best methods of handling image data, registering and correcting the data, and extracting useful information from the images. The screwworm was eliminated in many parts of the United States by air-dropping sterile screwworms in areas where screwworms breed. The reproduction of the screwworm can be more or less predicted based on weather conditions -- cold weather slows the breeding, warm weather fosters it, and some moisture appears to enhance breeding conditions which, in turn, improves the chances of screwworm population growth. To obtain temperature and moisture conditions from remote areas, the NOAA improved TIROS operational satellite was selected to give data from the very high resolution radiometer (VHRR). The VHRR is a two-channel scanning instrument sensitive to energy in the visible spectrum from 0.6 to 0.7 micrometers and the infrared spectrum from 10.5 to 12.5 micrometers.

Quinn, M. J.↗