Search NASA⌕ Search

SEARCH · Search NASA

Results for “delta method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

A vortex-lattice method for general, unsteady aerodynamics

A general method of calculating unsteady, incompressible, inviscid, three-dimensional flows around arbitrary planforms has been developed. The method is an extension of the vortex-lattice technique. It is not limited by aspect ratio, camber, or angle of attack, as long as vortex breakdown does not occur above the surface of the wing and separation occurs only along sharp edges. As the wing performs arbitrary maneuvers, the position of the wake and the distribution of circulation on the wing and in the wake are obtained as functions of time. One desirable feature of the present method is its ability to treat steady lifting flows very efficiently. Several examples of steady and unsteady flows are presented. These include rectangular wings, with and without flaps, delta, and cropped delta wings.

Konstadinopoulos, P.↗

Spectral flux from low-density photospheres - Low-temperature results

Previous studies of low-density, hydrogen-dominated, quasi-static photospheres (such as those of Type II supernovae) are extended to effective temperatures Te = 4000-6000 K. These temperatures include those at which hydrogen recombines at the densities investigated, corresponding to scale heights Delta R = (1-100) x 10 to the 14th cm. In addition to presenting results for the emergent spectral flux (required to obtain supernova distances via the Baade method), the validity of some assumptions previously made is demonstrated. It is shown that the level populations of hydrogen are governed solely by a balance between photoionization directly to and recombination directly from the continuum.

Hershkowitz, Stephen↗

A streamwise upwind algorithm applied to vortical flow over a delta wing

Improvements have been made to a streamwise upwind algorithm so that it can be used for calculating flows with vortices. A calculation is shown of flow over a delta wing at an angle of attack. The laminar, thin-layer, Navier-Stokes equations are used for the calculation. The results are compared with another upwind method, a central-differencing method, and experimental data. The present method shows improvements in accuracy and convergence properties.

Goorjian, Peter M.↗

Atomic Layer Deposition of Chemical Passivation Layers and High Performance Anti-Reflection Coatings on Back-Illuminated Detectors

A back-illuminated silicon photodetector has a layer of Al2O3 deposited on a silicon oxide surface that receives electromagnetic radiation to be detected. The Al2O3 layer has an antireflection coating deposited thereon. The Al2O3 layer provides a chemically resistant separation layer between the silicon oxide surface and the antireflection coating. The Al2O3 layer is thin enough that it is optically innocuous. Under deep ultraviolet radiation, the silicon oxide layer and the antireflection coating do not interact chemically. In one embodiment, the silicon photodetector has a delta-doped layer near (within a few nanometers of) the silicon oxide surface. The Al2O3 layer is expected to provide similar protection for doped layers fabricated using other methods, such as MBE, ion implantation and CVD deposition.

Hoenk, Michael E.↗

Interactions between Ground State Oxygen Atoms and Molecules: O - O and O (sub2) - O (sub2)

Potential energy curves for O - O interactions corresponding to the X (sup 3) Sigma - g, 1 delta g, 1 Sigma plus g, 3 delta u, A3 Sigma plus u, 1 Sigma - u, and B3 Sigma states of O (sub 2) have been calculated from spectroscopic data by the Rydberg‐Klein‐Rees method. Curves for the remaining twelve states of O (sub 2) dissociating to ground state atoms have been obtained from relations derived from approximate quantum‐mechanical calculations, and checked against the meager experimental information available. Two semi‐independent calculations have been made, and are in good agreement with each other. The quantum‐mechanical relations also lead to an approximate O (sub 2) - O (sub 2) interaction, which is consistent with interactions derived from vibrational relaxation times and from high‐temperature gas viscosity data.

Vanderslice, Joseph T.↗

Theory of Microwave Instability and Coherent Synchrotron Radiation in Electron Storage Rings

Bursting of coherent synchrotron radiation has been observed and in fact used to generate THz radiation in many electron storage rings. In order to understand and control the bursting, we return to the study of the microwave instability. In this paper, we will report on the theoretical understanding, including recent developments, of the microwave instability in electron storage rings. The historical progress of the theories will be surveyed, starting from the dispersion relation of coasting beams, to the work of Sacherer on a bunched beam, and ending with the Oide and Yokoya method of discretization. This theoretical survey will be supplemented with key experimental results over the years. Finally, we will describe the recent theoretical development of utilizing the Laguerre polynomials in the presence of potential-well distortion. This self-consistent method will be applied to study the microwave instability driven the impedances due to the coherent synchrotron radiation. Over the past quarter century, there has been steady progress toward smaller transverse emittances in electron storage rings used for synchrotron light sources, from tens of nm decades ago to the nm range recently. In contrast, there is not much progress made in the longitudinal plane. For an electron bunch in a typical ring, its relative energy spread {sigma}{sub {delta}} remains about 10{sup -3} and its length {sigma}{sub z} is still in between 5 mm to 10 mm. Now the longitudinal emittance ({sigma}{sub {delta}}{sigma}{sub z}) becomes a factor of thousand larger than those in the transverse dimensions. In this paper, we will address questions of: How short a bunch can be? What is the fundamental limit? If there is a limit, is there any mitigation method? Since the synchrotron radiation is so fundamental in electron storage rings, let us start with the coherent synchrotron radiation (CSR).

43 PARTICLE ACCELERATORS↗

Optimization of a GO2/GH2 Impinging Injector Element

An injector optimization methodology, method i, is used to investigate optimal design points for a gaseous oxygen/gaseous hydrogen (GO2/GH2) impinging injector element. The unlike impinging element, a fuel-oxidizer- fuel (F-O-F) triplet, is optimized in terms of design variables such as fuel pressure drop, (Delta)P(sub f), oxidizer pressure drop, (Delta)P(sub o), combustor length, L(sub comb), and impingement half-angle, alpha, for a given mixture ratio and chamber pressure. Dependent variables such as energy release efficiency, ERE, wall heat flux, Q(sub w), injector heat flux, Q(sub inj), relative combustor weight, W(sub rel), and relative injector cost, C(sub rel), are calculated and then correlated with the design variables. An empirical design methodology is used to generate these responses for 163 combinations of input variables. Method i is then used to generate response surfaces for each dependent variable. Desirability functions based on dependent variable constraints are created and used to facilitate development of composite response surfaces representing some, or all, of the five dependent variables in terms of the input variables. Three examples illustrating the utility and flexibility of method i are discussed in detail. First, joint response surfaces are constructed by sequentially adding dependent variables. Optimum designs are identified after addition of each variable and the effect each variable has on the design is shown. This stepwise demonstration also highlights the importance of including variables such as weight and cost early in the design process. Secondly, using the composite response surface which includes all five dependent variables, unequal weights are assigned to emphasize certain variables relative to others. Here, method i is used to enable objective trade studies on design issues such as component life and thrust to weight ratio. Finally, specific variable weights are further increased to illustrate the high marginal cost of realizing the last increment of injector performance and thruster weight.

Tucker, P. Kevin↗

A hybrid Pade-Galerkin technique for differential equations

A three-step hybrid analysis technique, which successively uses the regular perturbation expansion method, the Pade expansion method, and then a Galerkin approximation, is presented and applied to some model boundary value problems. In the first step of the method, the regular perturbation method is used to construct an approximation to the solution in the form of a finite power series in a small parameter epsilon associated with the problem. In the second step of the method, the series approximation obtained in step one is used to construct a Pade approximation in the form of a rational function in the parameter epsilon. In the third step, the various powers of epsilon which appear in the Pade approximation are replaced by new (unknown) parameters (delta(sub j)). These new parameters are determined by requiring that the residual formed by substituting the new approximation into the governing differential equation is orthogonal to each of the perturbation coordinate functions used in step one. The technique is applied to model problems involving ordinary or partial differential equations. In general, the technique appears to provide good approximations to the solution even when the perturbation and Pade approximations fail to do so. The method is discussed and topics for future investigations are indicated.

Geer, James F.↗

Systematic uncertainties in the Monte Carlo calculation of ion chamber replacement correction factors

In a previous study [Med. Phys. 35, 1747-1755 (2008)], the authors proposed two direct methods of calculating the replacement correction factors (P{sub repl} or p{sub cav}p{sub dis}) for ion chambers by Monte Carlo calculation. By ''direct'' we meant the stopping-power ratio evaluation is not necessary. The two methods were named as the high-density air (HDA) and low-density water (LDW) methods. Although the accuracy of these methods was briefly discussed, it turns out that the assumption made regarding the dose in an HDA slab as a function of slab thickness is not correct. This issue is reinvestigated in the current study, and the accuracy of the LDW method applied to ion chambers in a {sup 60}Co photon beam is also studied. It is found that the two direct methods are in fact not completely independent of the stopping-power ratio of the two materials involved. There is an implicit dependence of the calculated P{sub repl} values upon the stopping-power ratio evaluation through the choice of an appropriate energy cutoff {Delta}, which characterizes a cavity size in the Spencer-Attix cavity theory. Since the {Delta} value is not accurately defined in the theory, this dependence on the stopping-power ratio results in a systematic uncertainty on the calculated P{sub repl} values. For phantom materials of similar effective atomic number to air, such as water and graphite, this systematic uncertainty is at most 0.2% for most commonly used chambers for either electron or photon beams. This uncertainty level is good enough for current ion chamber dosimetry, and the merits of the two direct methods of calculating P{sub repl} values are maintained, i.e., there is no need to do a separate stopping-power ratio calculation. For high-Z materials, the inherent uncertainty would make it practically impossible to calculate reliable P{sub repl} values using the two direct methods.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Magnetostriction and {Delta}E effect of melt-spun (Fe{sub 81-x}Co{sub x}Ga{sub 19}){sub 80}B{sub 20} ribbons

(Fe{sub 81-x}Co{sub x}Ga{sub 19}){sub 80}B{sub 20} ribbons, with x = 0, 7, 11, 19, and 23, were made by the single-roller quenching method. The x-ray diffraction patterns showed the A2, D0{sub 19}, and L1{sub 2} diffraction peaks coexisting with the amorphous matrix background. When Fe was replaced by Co, i.e., when x was increased, the first crystallization temperature (T{sub X1}) and Curie temperature (T{sub C1}) rose greatly. With a sufficiently heavy load (or weight) stretching the ribbon downward, the magnetization M{sub S} was pulled along the vertical direction (i.e., the tension-axis). Then, by applying a horizontal field (H{sub E}) up to 6 KOe, we determined the sign and magnitude of the saturation magnetostriction ({lambda}{sub S}). The Young's modulus (E{sub S}) at magnetization saturation and {Delta}E effect was estimated from the stress-strain curve. We discovered that the stress-strain curve of (Fe{sub 81}Ga{sub 19}){sub 80}B{sub 20} exhibits the auxetic (or abnormal) characteristic with {Delta}E < 0. For the rest of the (Fe{sub 81-x}Co{sub x}Ga{sub 19}){sub 80}B{sub 20} with x {ne} 0, their stress-strain curves are normal with {Delta}E > 0. Because the sign of {lambda}{sub S} of the A2 phase is opposite to that of the D0{sub 19} and L1{sub 2} phases, {lambda}{sub S} of (Fe{sub 81-x}Co{sub x}Ga{sub 19}){sub 80}B{sub 20} is much reduced. However, {Delta}E/E{sub 0} Approximately-Equal-To-Or-The-Image-Of 36% is quite large for (Fe{sub 58}Co{sub 23}Ga{sub 19}){sub 80}B{sub 20}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exact Results for Casimir Interactions between Dielectric Bodies: The Weak-Coupling or van der Waals Limit

In earlier papers, we have applied multiple-scattering techniques to calculate Casimir forces due to scalar fields between different bodies described by delta function potentials. When the coupling to the potentials became weak, closed-form results were obtained. We simplify this weak-coupling technique and apply it to the case of tenuous dielectric bodies, in which case the method involves the summation of van der Waals (Casimir-Polder) interactions. Once again, exact results for finite bodies can be obtained. We present closed formulas describing the interaction between spheres, between cylinders, and between an infinite plate and a rectangular slab of finite size. For such a slab, we consider the torque acting on it and find that nontrivial equilibrium points can occur.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermodynamics of balanced and slightly spin-imbalanced Fermi gases at unitarity

In this article we present a Monte Carlo calculation of the critical temperature and other thermodynamic quantities for the unitary Fermi gas with a population imbalance (unequal number of fermions in the two spin components). We describe an improved worm-type algorithm that is less prone to autocorrelations than the previously available methods and show how this algorithm can be applied to simulate the unitary Fermi gas in presence of a small imbalance. Our data indicate that the critical temperature remains almost constant for small imbalances h={Delta}{mu}/{epsilon}{sub F} < or approx. 0.2. We obtain the continuum result T{sub c}=0.171(5){epsilon}{sub F} in units of Fermi energy and derive a lower bound on the deviation of the critical temperature from the balanced limit, T{sub c}(h)-T{sub c}(0)>-0.5{epsilon}{sub F}h{sup 2}. Using an additional assumption a tighter lower bound can be obtained. We also calculate the energy per particle and the chemical potential in the balanced and imbalanced cases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The effect of calcining temperature on the magnetic properties of the ultra-fine NiCuZn-ferrites

In this study, the ultra-fine NiCuZn-ferrite was prepared by a coprecipitation method. The magnetic properties were investigated in terms of calcining temperature. The ferrite powders, Ni{sub 0.206}Cu{sub 0.206}Zn{sub 0.618}Fe{sub 1.94}O{sub 4-{delta}}, were initially heat treated at various temperatures of 300-750 deg. C, and then sintered at the final temperature of 900 deg. C. The average particle size calculated by a XRD pattern and confirmed by a transmission electron microscope (TEM) micrograph was 7.5 nm. The calcining temperature was an important factor for microstructures and magnetic properties of the sintered ferrite. Scanning electron microscope (SEM) micrographs showed a uniform grain growth with small pores and high densification at the calcining temperature of 450 deg. C. From the results of magnetic property measurements, the ferrite calcined at 450 deg. C showed higher initial permeability (170) and quality factor (72) than those of other calcining temperatures.

36 MATERIALS SCIENCE↗

Energy spectrum of ideal quantum dots controlled by an external electric field

We have constructed a theoretical model describing the energy spectrum and autoionisation probability for an ideal quantum dot in the external DC and AC electric fields, free of using the delta-potential approximation and perturbation theory. The wave functions of the electron quasi-stationary states under these conditions are calculated. To this end, we have elaborated a new method for regularising the Gamov wave function used to calculate the complex electron energy, describing both the energy spectrum of the system and the probability of the state decay (autoionisation). The oscillations of the Stark shift and the energy level width due to the DC electric field are found. It is shown that these oscillations essentially affect the energy spectrum of the quantum dot and principally cannot be described within the frameworks of perturbative approaches. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation of microorganisms in cannabis after heating in a commercial vaporizer

There are concerns about microorganisms present on cannabis materials used in clinical settings by individuals whose health status is already compromised and are likely more susceptible to opportunistic infections from microbial populations present on the materials. Most concerning is administration by inhalation where cannabis plant material is heated in a vaporizer, aerosolized, and inhaled to receive the bioactive ingredients. Heating to high temperatures is known to kill microorganisms including bacteria and fungi; however, microbial death is dependent upon exposure time and temperature. It is unknown whether the heating of cannabis at temperatures and times designated by a commercial vaporizer utilized in clinical settings will significantly decrease the microbial loads in cannabis plant material. To assess this question, bulk cannabis plant material supplied by National Institute on Drug Abuse (NIDA) was used to assess the impact of heating by a commercial vaporizer. Initial method development studies using a cannabis placebo spiked with Escherichia coli were performed to optimize culture and recovery parameters. Subsequent studies were carried out using the cannabis placebo, low delta-9 tetrahydrocannabinol (THC) potency and high THC potency cannabis materials exposed to either no heat or heating for 30 or 70 seconds at 190°C. Phosphate-buffered saline was added to the samples and the samples agitated to suspend the microorganism. Microbial growth after no heat or heating was evaluated by plating on growth media and determining the total aerobic microbial counts and total yeast and mold counts. Overall, while there were trends of reductions in microbial counts with heating, these reductions were not statistically significant, indicating that heating using standard vaporization parameters of 70 seconds at 190°C may not eliminate the existing microbial bioburden, including any opportunistic pathogens. When cultured organisms were identified by DNA sequence analyses, several fungal and bacterial taxa were detected in the different products that have been associated with opportunistic infections or allergic reactions including Enterobacteriaceae, Staphylococcus, Pseudomonas, and Aspergillus.

59 BASIC BIOLOGICAL SCIENCES↗

Propagation of transients in a random medium

The propagation of transient scalar waves in a three-dimensional random medium is considered. The analysis is based on the smoothing method. An integro-differential equation for the coherent (or average) wave is derived and solved for the case of a statistically homogeneous and isotropic medium and a delta-function source. This yields the coherent Green's function of the medium. It is found that the waveform of the coherent wave depends generally on the distance from the source measured in terms of a certain dimensionless parameter. Based on the magnitude of this parameter, three propagation zones, called the near zone, the far zone, and the intermediate zone, are defined.

Wenzel, A. R.↗

Large-eddy substitution via vortex cancellation for wall turbulence control

A system of co-rotating longitudinal vortices was used to introduce streamline (as opposed to wall) curvature into a turbulent wall flow. Two methods of vortex cancellation, unwinding and self-annihilation, were tested as a means of removing the vortices once they had processed most of the incoming turbulent boundary layer. Vortex unwinding, which uses vorticity of the opposite sign, was shown to be a viable method for cancelling the co-rotating vortices. Vortex self-annihilation, caused by interference effects resulting from a close initial spanwise vortex spacing, eliminated the vortices within 60 delta downstream. In each case, reductions in boundary layer entrainment were found once the vortices were cancelled.

Mcginley, C. B.↗

Angular and Seasonal Variation of Spectral Surface Reflectance Ratios: Implications for the Remote Sensing of Aerosol over Land

We obtain valuable information on the angular and seasonal variability of surface reflectance using a hand-held spectrometer from a light aircraft. The data is used to test a procedure that allows us to estimate visible surface reflectance from the longer wavelength 2.1 micrometer channel (mid-IR). Estimating or avoiding surface reflectance in the visible is a vital first step in most algorithms that retrieve aerosol optical thickness over land targets. The data indicate that specular reflection found when viewing targets from the forward direction can severely corrupt the relationships between the visible and 2.1 micrometer reflectance that were derived from nadir data. There is a month by month variation in the ratios between the visible and the mid-IR, weakly correlated to the Normalized Difference Vegetation Index (NDVI). If specular reflection is not avoided, the errors resulting from estimating surface reflectance from the mid-IR exceed the acceptable limit of DELTA-rho approximately 0.01 in roughly 40% of the cases, using the current algorithm. This is reduced to 25% of the cases if specular reflection is avoided. An alternative method that uses path radiance rather than explicitly estimating visible surface reflectance results in similar errors. The two methods have different strengths and weaknesses that require further study.

Remer, L. A.↗