SEARCH · Search NASA

Results for “diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

All sources NASA NTRS DOE OSTI

NASA NTRS1972

Optically erasable and rewritable solid-state holograms.

Optical holographic storage in single-crystal LiNbO3 is described which can be optically erased at room temperature and then rewritten with no degradation in efficiency or writing rate. The diffraction efficiencies associated with the process are about 0.0001. Some variations from previously obtained results include a lack of threshold power density for writing, very-long-term persistence of the stored hologram, and a lack of a dependence of the diffracted intensity on the polarization of the readout beam.

Gaylord, T. K.↗

NASA NTRS1972

One-phonon transitions observed in the scattering of He atoms from a LiF/001/ surface.

For the scattering of a nearly monoenergetic beam of thermal-energy He atoms from a cleaved (001)LiF crystal surface, speed distributions of the reflected atoms are measured at suitably spaced scattering angles within the plane of incidence. From the measurements, elastic and one-phonon inelastic scattering processes are identified. Elastically scattered atoms distribute themselves in a set of sharp diffraction peaks. One-phonon inelastically scattered atoms are dispersed about each diffraction peak. The most probable velocities of the inelastically scattered atoms exhibit a characteristic sawtooth variation with scattering angle which, to first approximation, corresponds to conservation of the component of atom momentum tangent to the surface.-

Fisher, S. S.↗

NASA NTRS1973

Automated thematic mapping and change detection of ERTS-1 images, part A

The author has identified the following significant results. Automatic and accurate image processing techniques are essential to full utilization of ERTS-1 photography. In pursuit of this, terrain types in the ERTS-1 photography will be classified by spatial signatures. Diffraction patterns from selected ERTS-1 images have been developed optically and are being analyzed to identify unique signatures for various terrain types. Spatial signatures have been definitely identified for cultivated land and certain urban areas. A Fourier plane mask has been developed that greatly facilitates the analysis of the diffraction patterns.

Gramenopoulos, N.↗

NASA NTRS1972

New coding technique for computer generated holograms.

A coding technique is developed for recording computer generated holograms on a computer controlled CRT in which each resolution cell contains two beam spots of equal size and equal intensity. This provides a binary hologram in which only the position of the two dots is varied from cell to cell. The amplitude associated with each resolution cell is controlled by selectively diffracting unwanted light into a higher diffraction order. The recording of the holograms is fast and simple.

Haskell, R. E.↗

NASA NTRS1972

Electron petrography of Apollo sample 14310.

Thin sections prepared from Apollo sample 14310 have been examined with 100-kV transmission electron microscopy. The sample is composed principally of anorthite and pyroxene. The anorthites fall into two categories. The transitional anorthites that show the characteristic 'c' type diffraction maxima are characterized by very fine antiphase domain structures and some fine twinning. The body-centered anorthites that show no 'c' reflections are characterized by an absence of fine twinning and a less well-defined antiphase domain structure. Although both orthopyroxene and clinopyroxenes are reported in sample 14310, only clinopyroxenes were observed in this study and all show exsolution structures. The augite exsolved in pigeonite commonly is along lamellae parallel to (100), although (001) lamellae are also present. This unusual orientation was verified by diffraction patterns. The pigeonite commonly shows antiphase domains, attributed to stacking errors when the sample inverted from its high-temperature disordered form. In augite as the host phase, the pigeonite lamellae contain very complex structures including antiphase domains.

Smith, D. K.↗

NASA NTRS1974

Preparation and evaluation of thin-film sodium tungsten bronzes

Thin films of sodium tungsten bronze (NaxWO3) were investigated as reversible sodium ion electrodes for solid electrolytes. The films were made by electron beam evaporation of the three phases, W metal, Na2WO4, and WO3, followed by sintering. The substrates were sodium beta alumina disks and glass slides. X-ray diffraction analyses of the films showed that sintering in dry nitrogen with prior exposure to air lead to mixed phases. Sintering in vacuum with no air exposure produced tetragonal I bronze with a nominal composition of Na0.31WO3, single phase within the limits of X-ray diffraction detectability. The films were uniform and adherent on sodium beta alumina substrates. The ac and dc conductivities of the beta alumina were measured with the sodium tungsten bronze films as electrodes. These experiments indicated that the tetragonal I bronze electrodes were not completely reversible. This may have resulted from sodium ion blocking within the bronze film or at the bronze beta alumina interface. Methods for attempting to make more completely reversible electrodes are suggested.

Kautz, H. E.↗

NASA NTRS1973

A method for determining the preferred orientation of crystallites normal to a surface

Techniques representing the angular distribution of a particular direction in a crystallographic reference frame or analytical methods were developed. The data required by these techniques for displaying preferred orientation is obtained by measuring the orientation of a large number of crystallites. This may be done visually using etch-pit or Laue techniques which, experimentally, are both tedious and difficult. The intensities of X ray diffraction maxima are proportional to the number of crystallites whose crystallographic plane normals bisect the incident and diffracted beams. Parameters used in calculating powder patterns are also presented.

Snyder, R. L.↗

NASA NTRS1974

X-ray evaluation of crystals for stellar spectrometers

The report consists of three parts. The first part is an analysis of the principles involved in X-ray crystal evaluation and how they are applied to a number of crystals. The principles of crystal evaluation analysis as they apply to the special problems of X-ray astronomy are presented. A number of crystals were evaluated, and the energy dependence of the diffraction properties of (002) PET, (111) Ge, (101) ADP, (001) KAP, and (001) RAP are reported. The second part is a compilation of the diffraction properties of a number of crystals as reported by other authors. In the third part some technical details of a triple crystal spectrometer built by the author at Polytechnic Institute of Brooklyn are given. This spectrometer seems to be a most appropriate instrument for evaluation of crystal properties. (Modified author abstract)

Alexandropolos, N. G.↗

NASA NTRS1973

Application of Fourier analysis to multispectral/spatial recognition

One approach for investigating spectral response from materials is to consider spatial features of the response. This might be accomplished by considering the Fourier spectrum of the spatial response. The Fourier Transform may be used in a one-dimensional to multidimensional analysis of more than one channel of data. The two-dimensional transform represents the Fraunhofer diffraction pattern of the image in optics and has certain invariant features. Physically the diffraction pattern contains spatial features which are possibly unique to a given configuration or classification type. Different sampling strategies may be used to either enhance geometrical differences or extract additional features.

Hornung, R. J.↗

NASA NTRS1974

Laser scattering induced holograms in lithium niobate

A 3.0-mm thick poled single crystal of lithium niobate doped with 0.1 mole% iron was exposed to a single beam and then to two intersecting beams of an argon ion laser operating at 515-nm wavelength. Laser scattering induced holograms were thus written and analyzed. The presence of diffraction cones was observed and is shown to result from the internally recorded interference pattern resulting from the interference of the original incident laser beam with light scattered from material inhomogeneities. This phenomenon is analyzed using Ewald sphere construction techniques which reveal the geometrical relationships existing for the diffraction cones.

Magnusson, R.↗

NASA NTRS1970

Elimination of coherent noise in a coherent light imaging system

Optical imaging systems using coherent light introduce objectionable noise into the output image plane. Dust and bubbles on and in lenses cause most of the noise in the output image. This noise usually appears as bull's-eye diffraction patterns in the image. By rotating the lens about the optical axis these diffraction patterns can be essentially eliminated. The technique does not destroy the spatial coherence of the light and permits spatial filtering of the input plane.

Grebowsky, G. J.↗

NASA NTRS1974

Scattering of helium nozzle beams from LiF/001/ and NaCl/001/ crystal surfaces. I - Elastic and inelastic transitions

Nozzle-type atomic beams and time-of-flight detection methods are employed in studies of the scattering of thermal-energy He-4 atoms from LiF (001) and NaCl (001) surfaces under conditions where diffraction is observed and where substantial inelastic scattering occurs. Intensity and speed-distribution measurements are obtained for the portion of the scattering within the plane of incidence. For these measurements, incident-beam orientation with respect to target (polar angle and azimuth), incident-beam de Broglie wavelength (0.38-0.60 A), and crystal temperature (300-1000 K) are varied. For LiF, the measured intensity distributions exhibit sharp peaks comprised essentially of elastically scattered atoms and corresponding to up to third-order diffraction, inelastic scattering in the form of local dispersion about each of the elastic peaks, and a component of nominally diffuse scattering distributed below and between the peaks. For NaCl, the same general types of scattering are observed, with elastic scattering less prevalent, intensity peaks not as sharp, and dispersions of inelastic scattering harder to resolve.

Bledsoe, J. R.↗

NASA NTRS1975

Wavefront-error evaluation by mathematical analysis of experimental Foucault-test data

The diffraction theory of the Foucault test provides an integral formula expressing the complex amplitude and irradiance distribution in the Foucault pattern of a test mirror (lens) as a function of wavefront error. Recent literature presents methods of inverting this formula to express wavefront error in terms of irradiance in the Foucault pattern. The present paper describes a study in which the inversion formulation was applied to photometric Foucault-test measurements on a nearly diffraction-limited mirror to determine wavefront errors for direct comparison with ones determined from scatter-plate interferometer measurements. The results affirm the practicability of the Foucault test for quantitative wavefront analysis of very small errors, and they reveal the fallacy of the prevalent belief that the test is limited to qualitative use only. Implications of the results with regard to optical testing and the potential use of the Foucault test for wavefront analysis in orbital space telescopes are discussed.

Wilson, R. G.↗

NASA NTRS1975

Feasibility of a 30-meter space based laser transmitter

A study was made of the application of large expandable mirror structures in future space missions to establish the feasibility and define the potential of high power laser systems for such applications as propulsion and power transmission. Application of these concepts requires a 30-meter diameter, diffraction limited mirror for transmission of the laser energy. Three concepts for the transmitter are presented. These concepts include consideration of continuous as well as segmented mirror surfaces and the major stow-deployment categories of inflatable, variable geometry and assembled-in-space structures. The mirror surface for each concept would be actively monitored and controlled to maintain diffraction limited performance at 10.6 microns during operation. The proposed mirror configurations are based on existing aerospace state-of-the-art technology. The assembled-in-space concept appears to be the most feasible, at this time.

Berggren, R. R.↗

NASA NTRS1976

Dimensional stability

The temporal stability of glass and glass-ceramic materials is important to the success of a large diffraction-limited telescope. The results are presented of an experimental study of the dimensional stability of glasses and glass ceramics being considered for substrates of massive diffraction-limited mirrors designed for several years of service in earth orbit. The purpose of the study was to measure the relative change in length of the candidate substrate materials, to the order of 5 parts in 10 to the 8th power, as a function of several years time. The development of monolithic test etalons, the development and improvement of two types of ultra-high precision interferometers, and certain aspects of tests data presently achieved are discussed.

Hocken, R.↗

NASA NTRS1976

Chemical vapor deposition growth

A chemical vapor deposition (CVD) reactor system with a vertical deposition chamber was used for the growth of Si films on glass, glass-ceramic, and polycrystalline ceramic substrates. Silicon vapor was produced by pyrolysis of SiH4 in a H2 or He carrier gas. Preliminary deposition experiments with two of the available glasses were not encouraging. Moderately encouraging results, however, were obtained with fired polycrystalline alumina substrates, which were used for Si deposition at temperatures above 1,000 C. The surfaces of both the substrates and the films were characterized by X-ray diffraction, reflection electron diffraction, scanning electron microscopy optical microscopy, and surface profilometric techniques. Several experiments were conducted to establish baseline performance data for the reactor system, including temperature distributions on the sample pedestal, effects of carrier gas flow rate on temperature and film thickness, and Si film growth rate as a function of temperature.

Ruth, R. P.↗

NASA NTRS1975

A calibration of detectors and gratings between 100 and 600 Angstroms

Calibration and efficiency measurements of magnetic electron multipliers, diffraction gratings, and photocathodes over the wavelength range 100 to 600 A are reported. For some of the measurements it was found necessary to use the synchrotron radiation from a storage ring. Measurements of grating efficiencies, the polarization produced by diffraction gratings, and the photoelectric yields of various photocathodes are included.

Samson, J. A. R.↗

NASA NTRS1975

Propagation of a laser beam in a plasma

This paper shows that for a nonabsorbing medium with a prescribed index of refraction, the effects of beam stability, line focusing, and beam distortion can be predicted from simple ray optics. When the paraxial approximation is used, diffraction effects are examined for Gaussian, Lorentzian, and square beams. Most importantly, it is shown that for a Gaussian beam, diffraction effects can be included simply by adding imaginary solutions to the paraxial ray equations. Also presented are several procedures to extend the paraxial approximation so that the solution will have a domain of validity of greater extent.

Chapman, J. M.↗