Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrostatic interaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Electrostatic protection of the solar power satellite and rectenna. Part 1: Protection of the solar power satellite

Several features of the interactions of the Solar Power Satellite (SPS) with its space environment are examined theoretically. The voltages produced at various surfaces due to space plasmas and the plasma leakage currents through the kapton and sapphire solar cell blankets are calculated. At geosynchronous orbit, this parasitic power loss is only 0.7%, and is easily compensated by oversizing. At low Earth orbit, the power loss is potentially much larger (3%), and anomalous arcing is expected for the EOTV high voltage negative surfaces. Preliminary results of a three dimensional self consistent plasma and electric field computer program are presented, confirming the validity of the predictions made from the one dimensional models. Lastly, magnetic shielding of the satellite is considered to reduce the power drain and to protect the solar cells from energetic electron and plasma ion bombardment. It is concluded that minor modifications can allow the SPS to operate safely and efficiently in its space environment. Subsequent design changes will substantially alter the basic conclusions.

Source record↗

Electrostatic Noise in the Plasma Environment Around the Shuttle

The Langmuir probe flown as part of the Solar Array Module Plasma Interactions Experiment (SAMPIE) package aboard the space shuttle flight STS-62 was used to determine plasma potential fluctuations in the vicinity of the shuttle. The broadband noise was observed at frequencies 250 - 20,000 Hz. Measurements were performed in ram conditions; thus, it seems reasonable to believe that the influence of spacecraft operations on plasma parameters was absolutely negligible. The average spectrum of fluctuations is in agreement with theoretical predictions. The influence on the observed spectra of arcing generated by high negative bias voltages applied to solar cell samples is briefly discussed.

Vayner, Boris V.↗

Effect of the Electrostatic Field due to the Surface Monolayer Metal Atoms on the Dissociation of Homonuclear Diatomic Gases in Gas-Metal Surface Reactions

The present paper examines the role of an electrostatic field generated by the outermost monolayer of metal ions prior to gas adsorption in aiding the dissociation of homonuclear diatomic gas molecules. The interaction of five homonuclear diatomic gases, Cl 2 , F 2 , H 2 , N 2 and O 2 , with several pure metals are examined using Coulomb’s law to calculate the attractive and repulsive forces between the electrons or ions in the gas molecule and the free surface metallic electrons or ions assuming a Bohr model. These calculations demonstrate that the total energy of the electrostatic fields from the metals can exceed the molecular binding energies of Cl 2 , F 2 , and O 2 at some distance from the metallic surface thereby suggesting that these gases interact primarily with the metallic surface in their atomic states after molecular bond dissociation prior to reaction. In contrast, H 2 and N 2 gases do not dissociate prior to reaching the metal surface due to the fact that the effective charge of the gas ions is less than the total electron charge at the outermost electronic shell. The present results correlate linearly with the electrochemical series standard reduction potential as well as with the Pauling electronegativity for several metals.

Gas-metal reactions↗

Beam steering at the nanosecond time scale with an atomically thin reflector

Techniques to mold the flow of light on subwavelength scales enable fundamentally new optical systems and device applications. The realization of programmable, active optical systems with fast, tunable components is among the outstanding challenges in the field. Here, we experimentally demonstrate a few-pixel beam steering device based on electrostatic gate control of excitons in an atomically thin semiconductor with strong light-matter interactions. By combining the high reflectivity of a MoSe 2 monolayer with a graphene split-gate geometry, we shape the wavefront phase profile to achieve continuously tunable beam deflection with a range of 10°, two-dimensional beam steering, and switching times down to 1.6 nanoseconds. Our approach opens the door for a new class of atomically thin optical systems, such as rapidly switchable beam arrays and quantum metasurfaces operating at their fundamental thickness limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Tethered Balloon Current Generator - A space shuttle-tethered subsatellite for plasma studies and power generation

The objectives of the Tethered Balloon Current Generator experiment are to: (1) generate relatively large regions of thermalized, field-aligned currents, (2) produce controlled-amplitude Alfven waves, (3) study current-driven electrostatic plasma instabilities, and (4) generate substantial amounts of power or propulsion through the MHD interaction. A large balloon (a diameter of about 30 m) will be deployed with a conducting surface above the space shuttle at a distance of about 10 km. For a generally eastward directed orbit at an altitude near 400 km, the balloon, connected to the shuttle by a conducting wire, will be positive with respect to the shuttle, enabling it to collect electrons. At the same time, the shuttle will collect positive ions and, upon command, emit an electron beam to vary current flow in the system.

Williamson, P. R.↗

Interaction of comets with the interplanetary medium

The interaction of solar radiation and the solar wind with a comet as it moves around the sun is discussed. The overall structure of the comet-solar wind interaction, which is believed to give rise to a tangential discontinuity surface excluding the solar wind from the cometary ionosphere, a collisionless bow shock serving to decelerate and divert the solar wind, and a weak outer shock, is considered. The variable nature of the interaction as the comet moves around the sun and as solar wind conditions vary is then examined. It is shown that the cometary neutrals play a dominant role in standing off the solar wind, particularly under quiet conditions, making the cometary ionosphere in general highly incompressible. Conditions are found under which cometary neutrals cannot penetrate the ionopause to interact with the solar wind, and the inner shock becomes a hybrid ion-neutral shock. Finally, consideration of the direct interaction of the solar wind and solar ultraviolet radiation with the cometary nucleus indicates that electrostatic charging of the surface is capable of causing transport and blow-off of cometary dust at large heliocentric distances.

Mendis, D. A.↗

Advances in magnetospheric plasma-wave research during the IMS

Investigations of auroral radiation; terrestrial nonthermal continuum radiation; magnetospheric electrostatic emissions; ELF-VLF wave observations in the ionosphere and magnetosphere; wave-particle interactions; plasma wave propagation; plasma parameters; and ground-based observations of the magnetosphere during the International Magnetospheric Study are summarized.

Anderson, R. R.↗

Theory and simulation of electromagnetic beam modes and whistlers

Using particle-in-cell simulations and analytical methods, a study of the nonlinear evolution of electromagnetic instabilities driven by an anisotropic electron beam in an external magnetic field is performed. The unstable waves are either whistlerlike or beam-mode-like depending on the external field strength and beam velocity. The evolution of the particle distribution differs significantly in the two regimes. Even in the presence of a faster electrostatic instability, the electromagnetic waves grow to a significant amplitude. In certain cases, an energetic tail is formed, resulting in enhanced Cerenkov emission of electrostatic waves. The initial evolution of the particle distribution is explained in terms of the interaction of a given linearly unstable wave with the self-consistent perturbed distribution.

Newman, David L.↗

Electron velocity distributions and plasma waves associated with the injection of an electron beam into the ionosphere

An electron beam was injected into earth's ionosphere on August 1, 1985, during the flight of the Space Shuttle Challenger as part of the objectives of the Spacelab 2 mission. In the wake of the Space Shuttle a magnetically aligned sheet of electrons returning from the direction of propagation of the beam was detected with the free-flying Plasma Diagnostics Package. The thickness of this sheet of returning electrons was about 20 m. Large intensifications of broadband electrostatic noise were also observed within this sheet of electrons. A numerical simulation of the interaction of the electron beam with the ambient ionospheric plasmas is employed to show that the electron beam excites electron plasma oscillations and that it is possible for the ion acoustic instability to provide a returning flux of hot electrons by means of quasi-linear diffusion.

Frank, L. A.↗

Studies on equatorial shock formation during plasmaspheric refilling

Investigations based on small-scale simulations of microprocesses occurring when a magnetic flux tube refills with a cold plasma are summarized. Results of these investigations are reported in the following attached papers: (1) 'Numerical Simulation of Filling a Magnetic Flux Tube with a Cold Plasma: The Role of Ion Beam-Driven Instabilities'; and (2) 'Numerical Simulation of Filling a Magnetic Flux Tube with a Cold Plasma: Effects of Magnetically Trapped Hot Plasma'. Other papers included are: 'Interaction of Field-Aligned Cold Plasma Flows with an Equatorially-Trapped Hot Plasma: Electrostatic Shock Formation'; and 'Comparison of Hydrodynamic and Semikinetic Treatments for a Plasma Flow along Closed Field Lines'. A proposal for further research is included.

Singh, N.↗

Evaluation of Some Slow-wave Vane Structures for Aminiature Traveling-wave Tube at 30 Ghz

The dispersion characteristics of six vane type slow wave structures were experimentally measured near 1 GHz to determine applicability in an electrostatically focused 30 GHz miniature traveling wave tube (TWT). From the measured results, the trapezoidal vane structure appeared to be the most promising exhibiting an interaction impedance equal to 337.9 ohms at beta(L)/pi equal to 0.3. A 30 GHz trapezoidal vane structure with coupling irises was fabricated using electrical discharge machining (EDM). This structure, however, was too lossy for a short electrostatically focused tube, but several of the structures are amenable to a tube with permanent magnetic focusing.

Kavanagh, Frank↗

Current-phase relations of InAs nanowire Josephson junctions: From interacting to multimode regimes

Gate-tunable semiconductor-superconductor nanowires with superconducting leads form exotic Josephson junctions that are a highly desirable platform for two types of qubits: Those with topological superconductivity (Majorana qubits) and those based on tunable anharmonicity (gatemon qubits). Controlling their behavior, however, requires understanding their electrostatic environment and electronic structure. Here we study gated InAs nanowires with epitaxial aluminum shells. By measuring current-phase relations and comparing them with analytical and numerical calculations, we show that we can tune the number of modes, determine the transparency of each mode, and tune into regimes in which electron-electron interactions are apparent, indicating the presence of a quantum dot. To take into account electrostatic and geometrical effects, we perform microscopic self-consistent Schrodinger-Poisson numerical simulations, revealing the energy spectrum of Andreev states in the junction as well as their spatial distribution. Here, our work systematically demonstrates the effect of device geometry, gate voltage, and phase bias on mode behavior, providing insights into ongoing experimental efforts and predictive device design.

36 MATERIALS SCIENCE↗

Laboratory Plasma Source as an MHD Model for Astrophysical Jets

The significance of the work described herein lies in the demonstration of Magnetized Coaxial Plasma Gun (MCG) devices like CPS-1 to produce energetic laboratory magneto-flows with embedded magnetic fields that can be used as a simulation tool to study flow interaction dynamic of jet flows, to demonstrate the magnetic acceleration and collimation of flows with primarily toroidal fields, and study cross field transport in turbulent accreting flows. Since plasma produced in MCG devices have magnetic topology and MHD flow regime similarity to stellar and extragalactic jets, we expect that careful investigation of these flows in the laboratory will reveal fundamental physical mechanisms influencing astrophysical flows. Discussion in the next section (sec.2) focuses on recent results describing collimation, leading flow surface interaction layers, and turbulent accretion. The primary objectives for a new three year effort would involve the development and deployment of novel electrostatic, magnetic, and visible plasma diagnostic techniques to measure plasma and flow parameters of the CPS-1 device in the flow chamber downstream of the plasma source to study, (1) mass ejection, morphology, and collimation and stability of energetic outflows, (2) the effects of external magnetization on collimation and stability, (3) the interaction of such flows with background neutral gas, the generation of visible emission in such interaction, and effect of neutral clouds on jet flow dynamics, and (4) the cross magnetic field transport of turbulent accreting flows. The applicability of existing laboratory plasma facilities to the study of stellar and extragalactic plasma should be exploited to elucidate underlying physical mechanisms that cannot be ascertained though astrophysical observation, and provide baseline to a wide variety of proposed models, MHD and otherwise. The work proposed herin represents a continued effort on a novel approach in relating laboratory experiments to astrophysical jet observation. There exists overwhelming similarity among these flows that has already produced some fascinating results and is expected to continue a high pay off in future flow similarity studies.

Mayo, Robert M.↗

Influences of Hydrogen Bonding-Based Stabilization of Bolaamphiphile Layers on Molecular Diffusion within Organic Nanotubes Having Inner Carboxyl Groups

This paper reports molecular diffusion behavior in two bolaamphiphile-based organic nanotubes having inner carboxyl groups with different inner dimeters (10 and 20 nm) and wall structures, COOH-ONT 10nm and COOH-ONT 20nm , using imaging fluorescence correlation spectroscopy (imaging FCS). Here, the results were compared to those previously obtained in a similar nanotube with inner amine groups (NH 2 -ONT 10nm ). COOH-ONT 10nm , as with NH 2 -ONT 10nm , were formed from a rolled bolaamphiphile layer incorporating triglycine moieties, whereas COOH-ONT 20nm consisted of four stacks of triglycine-free bolaamphiphile layers. Imaging FCS measurements were carried out for anionic sulforhodamine B (SRB), zwitterionic/cationic rhodamine B (RB) and cationic rhodamine-123 (R123) diffusing within ONTs (1–9 µm long) at different pH (3.4–8.4) and ionic strengths (1.6–500 mM). Diffusion coefficients (D) of these dyes in the ONTs were very small (0.01–0.1 µm 2 /s), reflecting the significant contributions of molecule-nanotube interactions to diffusion. The D of SRB was larger at higher pH and ionic strength, indicating the essential role of electrostatic repulsion that was enhanced by the deprotonation of the inner carboxyl groups. Importantly, the D of SRB was virtually independent of nanotube inner diameter and wall structure, indicating the diffusion of the hydrophilic molecule was controlled by short timescale adsorption/desorption processes onto the inner surface. In contrast, pH effects on D were less clear for relatively hydrophobic R123 and RB, suggesting the significant contributions of non-Coulombic interactions. Interestingly, the diffusion of these molecules in COOH-ONT 20nm was slower than in COOH-ONT 10nm . Slower diffusion in COOH-ONT20nm was attributable to relatively efficient partitioning of the hydrophobic dyes into the bolaamphiphile layers, which was reduced in COOH-ONT 10nm due to the stabilization of its layer by polyglycine-II-type hydrogen bonding networks. These results show that, by tuning the bolaamphiphile structures and their intermolecular interactions, unique environments can be created within the nanospaces for enhanced molecular separations and reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Voyager 2 plasma wave observations at Uranus

At Uranus, the Voyager 2 plasma wave investigation observed very significant phenomena related to radio emissions, dust impacts, and magnetospheric wave-particle interactions. On January 19, 1986 (R = 270 R-sub U) the plasma wave investigation detected an intense radio burst at 31 and 56 kHz, and this provided the first indication that Uranus had a magnetosphere. During the encounter, more of these sporadic bursts were observed along with relatively continuous radio emissions extending down to 10 kHz, and a sporadic narrowband radio signal with f near 5 kHz. As Voyager passed through the ring plane, the plasma wave investigation recorded a large number of dust impacts. The Voyager 2 plasma wave instrument also detected many strong electromagnetic and electrostatic plasma waves, with intensity peaks in the region within 12 Uranus radii. These waves have characteristics that can interact strongly with the local plasma and with the trapped energetic particles, leading to precipitation into the atmosphere, charged particle acceleration, and charged particle diffusion. In addition, strong wave activity was detected in the region of the bow and shock and moderate levels in the magnetic tail.

Scarf, F. L.↗

Synthesizing Carbon‐Supported, High‐Loading, Ultra‐Small Pt 3 Ni Nanoparticles via Tuning the Surface Electrostatic Effect

Carbon‐supported nanoparticles (NPs) are widely used as catalysts in fuel cells and electrolyzers. While it is well known that NPs with smaller size and higher loading often lead to better catalytic activity, they remain challenging to synthesize due to the weak control over the surface properties of the support. Herein, a facile approach to synthesize carbon‐supported, high‐loading, and ultra‐small Pt 3 Ni NPs via applying thermal shock on strongly interacted carbon support with metal salt is reported. Specifically, sodium citrate is introduced into the precursor solution and substrate mixture, which induces strong electrostatic effect between metal salts and carbon particles that markedly improves precursor anchoring and dispersion, thereby achieving high particle loading as well as small size and distribution. As a proof‐of‐concept, the synthesis of Pt 3 Ni NPs supported on carbon black with particle size of 1.56 ± 0.36 nm at 30 wt% loading and 1.66 ± 0.56 nm at 40 wt% loading is reported, where the sizes are among the smallest while the loadings are among the highest in the literature. This approach can be readily extended to many compositions and substrates, with tunable particle size and loading, thereby substantially expanding the synthesis space for NP catalysts in various electrochemical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulated field-modulated x-ray absorption in titania

Here, we present a method to compute the x-ray absorption near-edge structure (XANES) spectra of solid-state transition metal oxides using real-time time-dependent density functional theory, including spin–orbit coupling effects. This was performed on bulk-mimicking anatase titania (TiO 2 ) clusters, which allows for the use of hybrid functionals and atom-centered all electron basis sets. Furthermore, this method was employed to calculate the shifts in the XANES spectra of the Ti L-edge in the presence of applied electric fields to understand how external fields can modify the electronic structure, and how this can be probed using x-ray absorption spectroscopy. Specifically, the onset of t 2g peaks in the Ti L-edge was observed to red shift and the e g peaks were observed to blue shift with increasing fields, attributed to changes in the hybridization of the conduction band (3d) orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗