Search NASA⌕ Search

SEARCH · Search NASA

Results for “finite difference methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Self-force via m-mode regularization and 2+1D evolution: Foundations and a scalar-field implementation on Schwarzschild spacetime

To model the radiative evolution of extreme mass-ratio binary inspirals (a key target of the LISA mission), the community needs efficient methods for computation of the gravitational self-force (SF) on the Kerr spacetime. Here we further develop a practical 'm-mode regularization' scheme for SF calculations, and give the details of a first implementation. The key steps in the method are (i) removal of a singular part of the perturbation field with a suitable 'puncture' to leave a sufficiently regular residual within a finite worldtube surrounding the particle's worldline, (ii) decomposition in azimuthal (m) modes, (iii) numerical evolution of the m modes in 2+1D with a finite-difference scheme, and (iv) reconstruction of the SF from the mode sum. The method relies on a judicious choice of puncture, based on the Detweiler-Whiting decomposition. We give a working definition for the ''order'' of the puncture, and show how it determines the convergence rate of the m-mode sum. The dissipative piece of the SF displays an exponentially convergent mode sum, while the m-mode sum for the conservative piece converges with a power law. In the latter case, the individual modal contributions fall off at large m as m{sup -n} for even n and as m{sup -n+1} for odd n, where n is the puncture order. We describe an m-mode implementation with a 4th-order puncture to compute the scalar-field SF along circular geodesics on Schwarzschild. In a forthcoming companion paper we extend the calculation to the Kerr spacetime.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Advanced operator splitting-based semi-implicit spectral method to solve the binary phase-field crystal equations with variable coefficients

We present an efficient method to solve numerically the equations of dissipative dynamics of the binary phase-field crystal model proposed by Elder et al. [K.R. Elder, M. Katakowski, M. Haataja, M. Grant, Phys. Rev. B 75 (2007) 064107] characterized by variable coefficients. Using the operator splitting method, the problem has been decomposed into sub-problems that can be solved more efficiently. A combination of non-trivial splitting with spectral semi-implicit solution leads to sets of algebraic equations of diagonal matrix form. Extensive testing of the method has been carried out to find the optimum balance among errors associated with time integration, spatial discretization, and splitting. We show that our method speeds up the computations by orders of magnitude relative to the conventional explicit finite difference scheme, while the costs of the pointwise implicit solution per timestep remains low. Also we show that due to its numerical dissipation, finite differencing can not compete with spectral differencing in terms of accuracy. In addition, we demonstrate that our method can efficiently be parallelized for distributed memory systems, where an excellent scalability with the number of CPUs is observed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interpolation methods and the accuracy of lattice-Boltzmann mesh refinement

A lattice-Boltzmann model to solve the equivalent of the Navier-Stokes equations on adap- tively refined grids is presented. A method for transferring information across interfaces between different grid resolutions was developed following established techniques for finite- volume representations. This new approach relies on a space-time interpolation and solving constrained least-squares problems to ensure conservation. The effectiveness of this method at maintaining the second order accuracy of lattice-Boltzmann is demonstrated through a series of benchmark simulations and detailed mesh refinement studies. These results exhibit smaller solution errors and improved convergence when compared with similar approaches relying only on spatial interpolation. Examples highlighting the mesh adaptivity of this method are also provided.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modified Heisenberg model for the zig-zag structure in multiferroic RMn{sub 2}O{sub 5}

The class of RMn{sub 2}O{sub 5} (R = Ho, Tb, Y, Eu) compounds offers multiferroic properties where the refined magnetic zig-zag order breaks the inversion symmetry. Varying the temperature, the system undergoes a magnetic and a subsequent ferroelectric phase transition where the ferroelectricity is magnetically induced. We propose a modified anisotropic Heisenberg model that can be used as a tractable analytical model studying the properties of those antiferromagnetic zig-zag spin chains. Based on a finite temperature Green's function method, it is shown that the polarization is induced solely by different exchange couplings of the two different Mn{sup 4+} and Mn{sup 3+} magnetic ions. We calculate the excitation energy of the spin system for finite temperatures, which for its part determines the temperature dependent magnetization and polarization. The ferroelectric phase transition is manifested as a kink in the excitation energy. The variation of the polarization by an external magnetic field depends strongly on the direction of that field. Whereas, the polarization in b-direction increases with an external magnetic field as well in b-direction it can be switched for strong fields in a-direction. The results based on that modified Heisenberg model are in qualitative agreement with experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Finite element solution of MHD power-law fluid with slip velocity effect and non-uniform heat source/sink

The laminar steady boundary layer flow of an incompressible MHD Power-law fluid past a continuously moving surface is investigated numerically. The study involves the influence of surface slip and non-uniform heat source/sink on the flow and heat transfer. The governing boundary layer flow equations are transformed into non-dimensional, non-linear coupled ordinary differential equations with the help of suitable similarity transformations. The Galerkin finite element method is implemented to crack the resulting system. The impact of different involved physical parameters is exhibited on the dimensionless velocity profile, temperature distributions and rate of heat transfer in graphical and tabular forms for pseudoplastic and dilatant fluids. The local Nusselt number is found to be the decreasing function of slip parameter, temperature and space-dependent heat sink parameter whereas it increases with increasing values of temperature and space dependent heat source parameter. The problem has important application in attaining the sustainable heat transfer rate for the cooling of fluids, especially in heat exchangers used frequently in chemical industry, in order to increase the trustworthiness of a system, as it removes high heat loads from these systems.

97 MATHEMATICS AND COMPUTING↗

A Three-Dimensional Level Set Simulation of Coupled Reactive Transport and Precipitation/Dissolution

Direct simulation of reactive transport in porous media is challenging due to the difficulty of tracking the dynamics of evolving solid-fluid interfaces. To meet this challenge, a level set method for capturing interface evolution due to dissolution and/or precipitation has been integrated into the standard grid-based finite-difference approach for simulating flow and transport in complex geometries. Based on the level set description of the interface geometry, Chorin’s projection method was modified to approximately satisfy the nonslip boundary condition at the grain surface, and a sharp interface methodwas developed for calculating the concentration field near the grain surface in the presence of surface reaction. Compared with the pixel representations of the interface used in other methods, the sub-grid representation using level set method offers significantly improved accuracy and efficiency. The advantage of the method is demonstrated in a systematic investigation of precipitation/dissolution in a simple three dimensional pore-throat with varying throat apertures. The simulation was first validated in a grid-refinement study. The effects of flow conditions, reaction rates and three-dimensional geometries are explored both qualitatively and quantitatively. The permeability-porosity relationship calculated from simulations is compared with Carman-Kozeny constitutive models to illustrate the limited capability of these empirical models, which are based on simplified pore-scale geometries and conditions.

58 GEOSCIENCES↗

Computational understanding of Li-ion batteries

Over the last two decades, computational methods have made tremendous advances, and today many key properties of lithium-ion batteries can be accurately predicted by first principles calculations. For this reason, computations have become a cornerstone of battery-related research by providing insight into fundamental processes that are not otherwise accessible, such as ionic diffusion mechanisms and electronic structure effects, as well as a quantitative comparison with experimental results. The aim of this review is to provide an overview of state-of-the-art ab initio approaches for the modelling of battery materials. Here, we consider techniques for the computation of equilibrium cell voltages, 0-Kelvin and finite-temperature voltage profiles, ionic mobility and thermal and electrolyte stability. The strengths and weaknesses of different electronic structure methods, such as DFT+U and hybrid functionals, are discussed in the context of voltage and phase diagram predictions, and we review the merits of lattice models for the evaluation of finite-temperature thermodynamics and kinetics. With such a complete set of methods at hand, first principles calculations of ordered, crystalline solids, i.e., of most electrode materials and solid electrolytes, have become reliable and quantitative. However, the description of molecular materials and disordered or amorphous phases remains an important challenge. We highlight recent exciting progress in this area, especially regarding the modelling of organic electrolytes and solid–electrolyte interfaces.

25 ENERGY STORAGE↗

Neutron Flux Interpolation with Finite Element Method in the Nuclear Fuel Cell Calculation using Collision Probability Method

Nuclear reactor design and analysis of next-generation reactors require a comprehensive computing which is better to be executed in a high performance computing. Flat flux (FF) approach is a common approach in solving an integral transport equation with collision probability (CP) method. In fact, the neutron flux distribution is not flat, even though the neutron cross section is assumed to be equal in all regions and the neutron source is uniform throughout the nuclear fuel cell. In non-flat flux (NFF) approach, the distribution of neutrons in each region will be different depending on the desired interpolation model selection. In this study, the linear interpolation using Finite Element Method (FEM) has been carried out to be treated the neutron distribution. The CP method is compatible to solve the neutron transport equation for cylindrical geometry, because the angle integration can be done analytically. Distribution of neutrons in each region of can be explained by the NFF approach with FEM and the calculation results are in a good agreement with the result from the SRAC code. In this study, the effects of the mesh on the k{sub eff} and other parameters are investigated.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

SU-E-I-08: Investigation of Deconvolution Methods for Blocker-Based CBCT Scatter Estimation

Purpose: To investigate whether deconvolution methods can improve the scatter estimation under different blurring and noise conditions for blocker-based scatter correction methods for cone-beam X-ray computed tomography (CBCT). Methods: An “ideal” projection image with scatter was first simulated for blocker-based CBCT data acquisition by assuming no blurring effect and no noise. The ideal image was then convolved with long-tail point spread functions (PSF) with different widths to mimic the blurring effect from the finite focal spot and detector response. Different levels of noise were also added. Three deconvolution Methods: 1) inverse filtering; 2) Wiener; and 3) Richardson-Lucy, were used to recover the scatter signal in the blocked region. The root mean square error (RMSE) of estimated scatter serves as a quantitative measure for the performance of different methods under different blurring and noise conditions. Results: Due to the blurring effect, the scatter signal in the blocked region is contaminated by the primary signal in the unblocked region. The direct use of the signal in the blocked region to estimate scatter (“direct method”) leads to large RMSE values, which increase with the increased width of PSF and increased noise. The inverse filtering is very sensitive to noise and practically useless. The Wiener and Richardson-Lucy deconvolution methods significantly improve scatter estimation compared to the direct method. For a typical medium PSF and medium noise condition, both methods (∼20 RMSE) can achieve 4-fold improvement over the direct method (∼80 RMSE). The Wiener method deals better with large noise and Richardson-Lucy works better on wide PSF. Conclusion: We investigated several deconvolution methods to recover the scatter signal in the blocked region for blocker-based scatter correction for CBCT. Our simulation results demonstrate that Wiener and Richardson-Lucy deconvolution can significantly improve the scatter estimation compared to the direct method.

60 APPLIED LIFE SCIENCES↗

Predicting the flow stress of Zircaloy-4 under in-reactor accident conditions - 2016-0075

During loss of coolant accident (LOCA) and reactivity-initiated accident (RIA), nuclear fuel rods experience high heating rates that change the microstructure and properties of zirconium cladding materials. The aim was to determine how different fast heating rates affect the kinetics of transformation and whether its consequences on the material yield stresses in the dual-phase region could be predicted. Phase fraction and texture of cold-rolled Zircaloy-4 were thus measured at fast heating rates similar to those experienced during LOCA and RIA by in-situ high-energy synchrotron x-ray diffraction; the yield stress was also measured at different heating rates to the same dual-phase temperature by electrical resistance method. Crystal plasticity finite element model was used to simulate the flow stresses with the inputs of the measured phase fraction and texture. The model is calibrated using the flow stress at the heating rate of 10 deg. Cs{sup -1} and used to predict the flow stress at the heating rate of 50 deg. Cs{sup -1} at the same temperature. A significant shift of the β transus temperature was identified for fast heating rates in the range of 10-100 deg. Cs{sup -1}. There is great similarity in texture at different heating rates. In the dual-phase temperature region, the a texture is almost identical to the starting texture and the β texture is nearly random. Yield stresses of cold-rolled Zircaloy-4 decrease at faster heating rate at the same temperature of 920 deg. C. A good agreement was found between the experimental and predicted flow stress at different heating rates, indicating this methodology has potential to be used to predict flow behavior in a fast transient regime. (authors)

36 MATERIALS SCIENCE↗

Thermal Test Suite for Code Maintenance and Validation of Diablo

This document describes a series of test problems that ensure that the Thermal capabilities of Diablo are working correctly. Diablo utilizes the Finite Element Method to discretize the problem in space and a trapezoidal rule finite difference scheme to discretize the problem in time. This suite will test the codes capabilities to handle various boundary conditions, source terms, and initial conditions. It will also test the coupling between thermal and solid effects, and the use of various linear and nonlinear solvers.

42 ENGINEERING↗

Experimental Study of the 3 He and Neutron Spin Structure at Low Q 2 and The Upgrade of the JLab Polarized 3 He Target

In the scattering process off a nuclear or nucleon target, the Gerasimov-Drell-Hearn (GDH) sum rule for real photons (Q 2 =0 where Q 2 &equiv; -q 2 with q the photon's 4-momentum) relates static properties of the target particle's ground state to dynamic properties of all its excited states. On the other side of the Q 2 spectrum, the Bjorken sum rule holds in the Bjorken limit Q 2 &rarr; &infin;. Bjorken sum rule relates the final structure functions of the proton and neutron to the nucleon axial coupling constant in weak decay. These two sum rules belong to domains where calculations are achievable but use different degrees of freedom: hadronic degrees of freedom at low Q 2 versus partonic degrees of freedom at intermediate Q 2 . Meanwhile, different methods have been used to connect the two sum rules at finite Q 2 values: Chiral Perturbation Theory is used to expand the GDH sum rule while Operator Product Expansion is used to expand the Bjorken sum rule. In recent decades, improvements in polarized beam and polarized target techniques have made it possible to test theoretical predictions in the intermediate Q 2 region. During the Jefferson Lab (JLab) Hall A E97110 experiment, a precise measurement of polarized cross sections was performed at 0.02 < Q 2 < 0.3 GeV 2 using a polarized 3 He target as an effective polarized neutron target. The measured data allowed us to test predictions of Chiral Perturbation Theory at very low Q 2 . Furthermore, an extrapolation to the real photon point Q 2 =0 tests the GDH sum rule on the neutron. In order to reach the small angles necessary for the low Q 2 range, a new septum magnet was installed in Hall A for this experiment. Unfortunately, the magnet was mis-wired during initial running. There were therefore two periods for this experiment: the first period had the defective magnet due to mis-wiring; while in the second period, the magnet had been fixed and was working properly. The cross sections and the asymmetries for the first period must be extracted using a difficult and unusual method employing focal plane variables in the spectrometer. In the work described in this thesis, the target-plane and focal-plane method will be established first and confirmed by elastic scattering cross section measurements from carbon foil and 3 He targets. Cross sections and asymmetries of inelastic scattering were then extracted using the same method, which constitute the main physics results of this thesis. Preliminary results on ITT , the integral of the polarized cross section, were also extracted and are presented in this thesis. In addition to the data analysis of E97110, this thesis includes instrumentation work performed on the polarized 3 He target at JLab. For the 12 GeV program of JLab, the polarized 3 He target is being upgraded to satisfy new experimental requirements. The new target is a convection-based cell with two transfer tubes rather than a single transfer tube as in the former 6 GeV design. The first stage of the target upgrade aims to produce a 40 cm long, 10 amg target that can withstand 30 &mu;A of electron beam current with an in-beam polarization of 55%, doubling the figure-of-merit from the 6 GeV time. Several studies were conducted at the Test Lab of JLab on the new convection cell. Work and improvement done on the Pulse Nuclear Magnetic Resonance (NMR) polarimetry and its test results will be presented. As this thesis is written, the target is being installed in Hall C of JLab in preparation for a 6-month long running from November 2019 to May 2020.

Ton, Nguyen↗

Extension of the DIF3D Code for Molten Salt Reactor Analysis

The molten salt reactor (MSR) with the fuel dissolved into the liquid salt has been selected as one of the six Generation-IV reactors due to its excellent characteristics in the aspects of sustainability, economy, passive safety, and resource utilization. In a MSR, the fuel salt is circulated throughout the whole system and thus some of delayed neutron precursors generated in the core decay in position of low importance or even out of the core. As a result, the multiplication factor (k-eff) of MSR is smaller than that of a reactor of stationary fuel when all the other conditions are same. Therefore, the neutronics code developed for stationary fuel cannot be applied directly to MSR analysis. In this paper, we describe the extension and application of the DIF3D code to MSR neutronics analysis. The DIF3D code system is a multi-group steady-state neutron diffusion and transport theory solver. It provides three flux solution options: finite-difference diffusion theory, nodal diffusion theory, and variational nodal transport theory methods. Eigenvalue, adjoint, fixed source and criticality (concentration) search problems are permitted. The DIF3D code has recently been modified to model the flowing fuel. To verify the new capability of DIF3D, the MSFR [4] core was analyzed with a wide range of velocity field of fuel salt and time spent outside of the core.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development and validation of a two-dimensional fast-response flood estimation model

A finite difference formulation of the shallow water equations using an upwind differencing method was developed maintaining computational efficiency and accuracy such that it can be used as a fast-response flood estimation tool. The model was validated using both laboratory controlled experiments and an actual dam breach. Through the laboratory experiments, the model was shown to give good estimations of depth and velocity when compared to the measured data, as well as when compared to a more complex two-dimensional model. Additionally, the model was compared to high water mark data obtained from the failure of the Taum Sauk dam. The simulated inundation extent agreed well with the observed extent, with the most notable differences resulting from the inability to model sediment transport. The results of these validation studies complex two-dimensional model. Additionally, the model was compared to high water mark data obtained from the failure of the Taum Sauk dam. The simulated inundation extent agreed well with the observed extent, with the most notable differences resulting from the inability to model sediment transport. The results of these validation studies show that a relatively numerical scheme used to solve the complete shallow water equations can be used to accurately estimate flood inundation. Future work will focus on further reducing the computation time needed to provide flood inundation estimates for fast-response analyses. This will be accomplished through the efficient use of multi-core, multi-processor computers coupled with an efficient domain-tracking algorithm, as well as an understanding of the impacts of grid resolution on model results.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Numerical Research on Magnetic Field, Temperature Field and Flow Field During Melting and Directionally Solidifying TiAl Alloys by Electromagnetic Cold Crucible

The electromagnetic cold crucible (EMCC) technique is an effective method to melt and directionally solidify reactive and high-temperature materials without contamination. The temperature field and fluid flow induced by the electromagnetic field are very important for melting and controlling the microstructure. In this article, a 3D EMCC model for calculating the magnetic field in the charges (TiAl alloys) using the T-Ω finite element method was established and verified. Magnetic fields in the charge under different electrical parameters, positions and dimensions of the charge were calculated and analyzed. The calculated results show that the magnetic field concentrates in the skin layer, and the magnetic flux density (B) increases with increasing of the frequency, charge diameter and current. The maximum B in the charge is affected by the position of the charge in EMCC (h{sub 1}) and the charge height (h{sub 2}), which emerges at the middle of coils (h{sub c}) when the relationship of h{sub c} < h{sub 1} + h{sub 2} < h{sub c} + δ is satisfied. Lower frequency and smaller charge diameter can improve the uniformity of the magnetic field in the charge. Consequently, the induced uniform electromagnetic stirring weakens the turbulence and improves temperature uniformity in the vicinity of the solid/liquid (S/L) interface, which is beneficial to forming a planar S/L interface during directional solidification. Based on the above conclusions, the TiAlNb alloy was successfully melted with lower power consumption and directionally solidified by the square EMCC.

36 MATERIALS SCIENCE↗

Quasinormal modes and Regge poles of the canonical acoustic hole

We compute the quasinormal mode frequencies and Regge poles of the canonical acoustic hole (a black hole analogue), using three methods. First, we show how damped oscillations arise by evolving generic perturbations in the time domain using a simple finite-difference scheme. We use our results to estimate the fundamental quasinormal frequencies of the low multipolar modes l=1,2,.... Next, we apply an asymptotic method to obtain an expansion for the frequency in inverse powers of l+1/2 for low overtones. We test the expansion by comparing against our time-domain results, and (existing) WKB results. The expansion method is then extended to locate the Regge poles. Finally, to check the expansion of Regge poles we compute the spectrum numerically by direct integration in the frequency domain. We give a geometric interpretation of our results and comment on experimental verification.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Robust Approaches to Handling Complex Geometries with Galerkin Difference Methods

The Galerkin difference (GD) basis is a set of continuous, piecewise polynomials defined using a finite-difference-like grid of degrees of freedom. The one dimensional GD basis functions are naturally extended to multiple dimensions using a tensor product construction on quadrilateral elements. The GD basis can be used to define the solution space for a discontinuous Galerkin finite element discretization of partial differential equations. In this work we propose two approaches to handling complex geometries within this setting: (1) using nonconforming, curvilinear GD elements and (2) coupling affine GD elements with curvilinear simplicial elements. In both cases the (semidiscrete) discontinuous Galerkin method is provably energy stable even when variational crimes are committed. Additionally, for both element types a weight-adjusted mass matrix is used, which ensures that only the reference mass matrix must be inverted. We also present sufficient conditions on the treatment of metric terms for the curvilinear, nonconforming GD elements to ensure that the scheme is both constant preserving and conservative. Numerical experiments confirm the stability results and demonstrate the accuracy of the coupled schemes.

97 MATHEMATICS AND COMPUTING↗