Search NASA⌕ Search

SEARCH · Search NASA

Results for “intercalation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Trace Chemical Detection Using Intercalated MXenes as a Signal Enhancing Substrate in Optical Probes

MXenes are 2D materials composed of layered transition metal nitrides or carbides. These materials are synthesized by HF exfoliation from MAX phases (Ti{sub 3}AlC{sub 2}). The 2D nanomaterial was synthesized by the removal of the 'A' element, resulting in a Mxene product (Ti{sub 3}C{sub 2}). MXenes have the general formula M{sub n+1}X{sub n}T{sub x}, where M is an early transition metal, X is Carbon and/or Nitrogen, and T accounts for surface terminated functional groups such as Fluoride, hydroxyl, and oxygen. These materials have very unique properties, similar to graphene, that allows them to be applied in a variety of trace detection techniques including surface-enhanced Raman spectroscopy (SERS). MXenes have also been demonstrated to selectively uptake uranyl ion, UO{sub 2}{sup 2+}. If this property can be combined with SERS or fluorescence detection, it may be possible to use MXenes as the basis for an alternative method to kinetic phosphorescence analysis (KPA) for trace uranyl measurements. Objectives: To confirm that MXene Nano materials are suitable substrates for SERS and sensor development by enhancing Raman signaling. To determine if certain MXene preparation methods yield materials that are more suitable for trace sensing methods. To determine uranyl uptake properties of these MXene materials and test them for analytical signals. Sample Preparation: Preparation of Ti{sub 3}C{sub 2}MXene (at FSU). MXenes were prepared by etching Al from Ti{sub 3}AlC{sub 2} (MAX phase)material. Two etching techniques yield different MXene products: LiF/HCl: Milder reaction, larger MXene flakes. HF: Harsher reaction, smaller flakes, larger layer separation. Products washed to remove etchant, vacuum filtered, and dried. Dried MXene flakes are air-stable. Film preparation for sensor testing (at SRNL): Suspend powder in diH{sub 2}O, purge with Ar, sonicate for 30 min. Centrifuge and collect supernate with suspended particles. Observed LiF-etched Mxene yielded a higher density of particles and darker collected solution. Drop-cast (4 ml) supernate onto slides and dried with Ar. For Rhodamine B (RhB) testing, drop-cast 4 ml drops onto Mxene spots and dried with Ar. Scanning Electron Microscopy conditions: 10 kV Beam energy, high vacuum; Working distance of 8 mm; beam penetration depth appx. 4 microns, beam spot size appx. 2 nanometers. Results: Detection of aluminum correlates with bright spots on image. Presence of aluminum shows that LiF/HCl etching was less thorough than HF etching. Trace Cl detection in LiF images suggests incomplete rinsing. HF has smaller feature size, more layer structure, and increased homogeneity, consistent with expectations. Macroscopic Raman spectroscopy measurements: 532 nm excitation, ∼50 mW with a ∼100 micron spot size (InPhotonics RPB probe). Kaiser Optical Holospec f/1.8 spectrometer with cooled (-60 deg.C) Andor iDus OE420 CCD. LiF 1x supernate showed good signal for trace measurements of Rhodamine B. HF and 1/4x LiF supernates showed little Mxene or Rhodamine B signal. Low deposition densities led to excess background signal from glass slides. For LiF film, response is linear with Rhodamine B concentration over range tested. Will retest with Raman microscope (∼1 micron spot size) to characterize SERS of more dilute LiF and HF etched Mxenes. Conclusions: The LiF etched material was more suitable for macroscopic SERS measurements because it was more concentrated, resulting in a thicker film than the HF etched Mxene and diluted LiF sample. However, the other materials may give greater SERS enhancements, which we hope to determine from measurements with the Raman microscope. From characterization with SEM we concluded that the HF etched Mxene is more uniform/homogenous and has smaller particle size than the LiF etched Mxene. There is still aluminum present in both samples indicating that etching wasn't complete, but the removal of the aluminum was more efficient in the HF method. Path Forward: Observe SERS with Raman microscopy, to obtain better signals for the more diluted samples and be able to compare enhancement effects for the different MXenes. Characterize uranyl sorption into MXene films and test Raman and fluorescence signals. Revisit the etching conditions to improve removal of aluminum. FSU and SRNL will continue to collaborate to create and characterize different Mxene materials and test their usefulness for sensor applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rechargeable Li-ion battery with halogen intercalated graphite electrode

The disclosure provides rechargeable lithium ion batteries comprising at least one lithium salt-graphite composite electrode. In particular, the disclosure provides a rechargeable “water-in-bisalt” lithium ion battery with a high potential where at least a portion of the lithium salt is phase separated from the aqueous electrolyte, and where the anionic-redox reaction occurs within the graphitic lattice.

Wang, Chunsheng↗

Pd overlayer on Oxygen pre-covered Graphene/Ru(0001): Thermal Stability

The behaviors of metal atoms on graphene and graphene oxide are quite important since the composite materials consisting of graphene and transition metal(s) can be employed in numerous technological applications. Despite that the great importance of metal particles on graphene or graphene oxide substrates, fundamental studies of the physical and chemical properties of metal clusters on graphene or graphene oxide are still needed. In this study, in order to elucidate the properties of metal on graphene (GR) and oxygen-precovered graphene (O-GR), the systems consisting of Pd deposited either on to pristine graphene or oxygen-precovered graphene layers have been investigated. The oxygen-precovered graphene was prepared by hot filament method under oxygen atmosphere. Exposure of the graphene layer to atomic oxygen resulted in both intercalation of oxygen between the graphene layer and the Ru(0001) substrate and functionalization of the graphene layer (mainly epoxide formation). Pd deposited onto the oxidized graphene layer interacted strongly with the intercalated oxygen, resulting in intercalation of some of the deposited Pd even at lower temperature than we have seen for Pd on pristine graphene. At the low coverage of 0.25 MLE, Pd mainly formed large planar domains (spreading of Pd on the oxidized graphene layer) and intercalated between the graphene layer and the Ru substrate at lower temperature due to the interaction between Pd and intercalated oxygen. At higher temperatures, both systems experience the same phenomenon, i.e., the intercalation of all of palladium between the graphene layer and Ru substrate. The intercalated Pd desorbed from the substrate at temperatures >1100 K. At higher Pd coverages, some of the Pd intercalated between the GR and the Ru substrate, while small Pd particles spread on the surface. The structure of the Pd overlayer after the 800 K annealing cycle seems to be very different from that observed at 300 K. The Pd that was present in small clusters spread out on the graphene surface due to the interaction with the intercalated Pd layer through the graphene layer. This interaction stabilized the Pd and even after 1000 K annealing the metal film was stable. After even higher temperature annealing all the Pd intercalated, and then desorbed above 1100 K. The graphene layer preserved its perfect structure (i.e., continuity) without any damage after the intercalation and desorption of Pd. We gratefully acknowledge the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Chemical Sciences, Geosciences, and Biosciences Division for the support of this work. The research described in this article was performed at the Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by the DOE Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is operated for the US DOE by Battelle Memorial Institute under contract number DE-AC05-76RL01830. CWY gratefully acknowledges the support of this work by the Sungshin Women’s University Research Grant of 2015.

Yi, Cheol-Woo W.↗