Search NASA⌕ Search

SEARCH · Search NASA

Results for “interlayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

The effect of chemically preintercalated alkali ions on the structure of layered titanates and their electrochemistry in aqueous energy storage systems

We introduce a novel chemical preintercalation synthesis technique based on a hydrogen peroxide induced sol–gel process to obtain alkali ion containing ternary layered titanates (MTO, where M = Li, Na, K). Synthesis parameters leading to the formation of single-phase materials with homogeneous elemental distribution are reported for each of the preintercalated ions. Our analyses indicate that the interlayer spacing in the structure of the layered titanates increases with the increase of the radius of the hydrated preintercalated ion. Scanning and transmission electron microscopy imaging revealed morphological diversity: the LTO phase crystallized as nanoplates assembled in “peony-like” spherical agglomerates while NTO and KTO particles exhibited a one-dimensional nanobelt or wire-like morphology, with the KTO nanobelts being shorter and more aggregated than the NTO nanobelts. Structural refinement corroborated by electron diffraction and high-resolution transmission electron microscopy revealed that the structure of the LTO phase is built by stacking Ti–O layers containing a single straight layer of connected TiO 6 octahedra. The layers in NTO and KTO structures form differently and consist of double Ti–O layers with two titanium rows and ragged arrangement of units built by TiO6 octahedra. The NTO electrodes exhibited the highest electrochemical performance in cells with aqueous 1 M Na 2 SO 4 electrolyte, followed by the KTO electrodes and then LTO electrodes, and this trend is maintained at various scan rates. The established relationships between the structure and electrochemical performance reveal that, in addition to interlayer distance and chemistry of the interlayer region, the structure of the layers can play an important role in charge storage properties of layered oxide electrodes. The double Ti–O layers in the structure of NTO and KTO phases provide a larger number of redox centers which could contribute to the superior electrochemical performance as compared to the LTO electrodes. Our findings indicate that layered materials containing double transition metal oxide layers are promising candidates for exfoliation and assembly with electronically conductive layers with the aim to create 2D heterostructures with high electrochemical performance.

25 ENERGY STORAGE↗

Li-ion and Na-ion intercalation in layered MnO 2 cathodes enabled by using bismuth as a cation pillar

Low-cost batteries based on Earth-abundant materials are needed for large-scale electrical storage for the grid. Cathodes based almost entirely on Mn oxides would reduce overall battery cost but cycling of Mn oxides is often not stable. In Li-ion cells, most polymorphs of MnO 2 undergo irreversible transformation to spinel LiMn 2 O 4 during cycling, causing capacity loss. Doping MnO 2 with Bi is known to stabilize the structure, but previous reports have relied on low-crystallinity material making it impossible to pinpoint the Bi location in the structure or its mechanism. In this work, we report a series of hydrated Bi-doped layered MnO 2 compounds and characterize their structures as a function of Bi amount. Bi is shown to reside in the material interlayer, provoking higher long-range structural order even at a low doping level of 1.3%. Doped material improves the specific capacity and stability of cycling in both Li-ion and Na-ion cells. A high level of Bi doping, 4.3%, causes loss of the interlayer crystal water in non-aqueous electrolyte, and this reduces the interlayer distance. Crystal water is shown to be beneficial in a Na-ion system, while its loss improves Li-ion cycling. This provides fundamental insight into how pillaring by a heavy, multivalent cation stabilizes layered oxides.

25 ENERGY STORAGE↗

Interface-induced fast Li+ transport in mixed ionic–electronic conductors

Interfacial instability between lithium metal and solid-state electrolytes limits the performance of all-solid-state lithium metal batteries (ASSLBs), leading to parasitic reactions, non-uniform Li+ flux, and dendrite growth. Here, we develop a composite interlayer composed of the anti-perovskite Li2OHCl0.75Br0.25 (AP) and carbon nanotubes (CNTs) to enhance both interfacial stability and ionic transport. The AP–CNT interlayer exhibits enhanced Li+ conductivity arising from interfacial electron transfer from AP to CNTs, which generates a built-in electric field that facilitates Li+ migration. Lithium symmetric cells incorporating this interlayer achieve a high critical current density of 2.4 mA cm−2 at 55 °C. This design integrates chemical robustness with coupled ion–electron transport, offering a generalizable strategy for safe, dendrite-free, and high-performance ASSLBs.

He, Chenche↗

Effect of Pt addition on growth stress and thermal stress of NiSi films

We have studied the effect of the addition of Pt on the growth stress and thermal stress of NiSi films. Platinum was added in the form of an interlayer (Ni/Pt/Si), capping layer (Pt/Ni/Si), and as an alloying element within the as-deposited Ni film (Ni-Pt/Si). The evolution of film stress during the solid-state reaction was monitored using in situ curvature measurements. The large transient compressive growth stress observed during the reaction of pure Ni with Si was significantly reduced for samples with a Pt interlayer or alloy. Based on in situ XRD measurements, this reduction in the compressive growth stress could be related to the disappearance of Ni rich phases from the phase sequence and an overall increase in the silicidation temperature during ramp anneals. Pt was also found to affect the buildup of thermal stress while cooling down the sample after Ni{sub 1-x}Pt{sub x}Si formation. The presence of Pt as a solute in the monosilicide causes a significant increase in the stress relaxation temperature, and therefore, in the total thermal stress as observed at room temperature. For a Pt interlayer, we observed a faster buildup of thermal stress, which could be related to a preferred epitaxial orientation of the monosilicide grains in this film as revealed by pole figure measurements.

36 MATERIALS SCIENCE↗

Performance enhancement of n-channel inversion type In{sub x}Ga{sub 1-x}As metal-oxide-semiconductor field effect transistor using ex situ deposited thin amorphous silicon layer

Significant enhancement in metal-oxide-semiconductor field effect transistor (MOSFET) transport characteristics is achieved with In{sub x}Ga{sub 1-x}As (x=0.53, x=0.20) channel material using ex situ plasma enhanced chemical vapor deposited amorphous Si layer. In{sub x}Ga{sub 1-x}As MOSFETs (L=2 {mu}m, V{sub gs}-V{sub t}=2.0 V) with Si interlayer show a maximum drain current of 290 mA/mm (x=0.53) and 2 {mu}A/mm (x=0.20), which are much higher compared to devices without a Si interlayer. However, charge pumping measurements show a lower average interface state density near the intrinsic Fermi level for devices without the silicon interlayer indicating that a reduction in the midgap interface state density is not responsible for the improved transport characteristics.

36 MATERIALS SCIENCE↗

Wavelength controlled multilayer-stacked linear InAs quantum dot arrays on InGaAsP/InP (100) by self-organized anisotropic strain engineering: A self-ordered quantum dot crystal

Multilayer-stacked linear InAs quantum dot (QD) arrays are created on InAs/InGaAsP superlattice templates formed by self-organized anisotropic strain engineering on InP (100) substrates in chemical beam epitaxy. Stacking of the QD arrays with identical emission wavelength in the 1.55 {mu}m region at room temperature is achieved through the insertion of ultrathin GaAs interlayers beneath the QDs with increasing interlayer thickness in successive layers. The increment in the GaAs interlayer thickness compensates the QD size/wavelength increase during strain correlated stacking. This is the demonstration of a three-dimensionally self-ordered QD crystal with fully controlled structural and optical properties.

36 MATERIALS SCIENCE↗

Surface acoustic wave velocity of gold films deposited on silicon substrates at different temperatures

Au thin films have been deposited by DC magnetron sputtering on Si (001) substrates at different substrate temperatures, ranging from 200 K to 450 K. With increasing temperature, the expected crystallinity and morphology of the Au thin film are clearly improved, as shown by x ray diffraction, atomic force microscopy and scanning electron microscopy experiments. Parallel to this, the surface acoustic wave propagation velocity shows a clear enhancement toward the ideal values obtained from numerical simulations of a Au thin film on Si (001) substrate. Moreover, a very thin and slightly rough interlayer between the Si (001) substrate and the Au thin film is developed for temperatures above 350 K. The composition and nature of this interlayer is not known. This interlayer may be responsible for the steep change in the structural and elastic properties of the Au thin films at the higher temperatures and possibly also for an improvement of the adhesion properties of the Au on the Si (001) substrate.

36 MATERIALS SCIENCE↗

Thin Metal Oxide Films to Modify a Window Layer in CdTe-Based Solar Cells for Improved Performance

We report on CdS/CdTe photovoltaic devices that contain a thin Ta₂O₅ film deposited onto the CdS window layer by sputtering. We show that for thicknesses below 5 nm, Ta₂O₅ films between CdS and CdTe positively affect the solar cell performance, improving JSC, VOC, and the cell power conversion efficiency despite the insulating nature of the interlayer material. Using the Ta₂O₅ interlayer, a VOC gain of over 100 mV was demonstrated compared to a CdTe/CdS baseline. Application of a 1nm Ta₂O₅ interlayer enabled the fabrication of CdTe solar cells with extremely thin (less than 30 nm) CdS window layers. The efficiency of these cells exceeded that of a base line cell with 95 nm of CdS.

Environmental Molecular Sciences Laboratory↗

The transition from amorphous to crystalline in Al/Zr multilayers

The amorphous-to-crystalline transition in Al(1.0%wtSi)/Zr and Al(Pure)/Zr multilayers grown by direct-current magnetron sputtering system has been characterized over a range of Al layer thicknesses (1.0-5.0 nm) by using a series of complementary measurements including grazing incidence X-ray reflectometry, atomic force microscopy, X-ray diffraction, and high-resolution transmission electron microscopy. The Al layer thickness transition exhibits the Si doped in Al could not only disfavor the crystallization of Al but also influence the changing trends of surface roughness and diffraction peak position of phase Al<111>. An interesting feature of the presence of Si in Al layer is that Si could influence the transition process in Al(1%wtSi) layer, in which the critical thickness (1.6 nm) of Al(Pure) layer in Al(Pure)/Zr shifts to 1.8 nm of Al(1.0%wtSi) layer in Al(1.0%wtSi)/Zr multilayer. We also found that the Zr-on-Al interlayer is wider than the Al-on-Zr interlayer in both systems, and the Al layers do not have specific crystal orientation in the directions vertical to the layer from selected area electron diffraction patterns below the thickness (3.0 nm) of Al layers. Above the thickness (3.0 nm) of Al layers, the Al layers are highly oriented in Al<111>, so that the transformation from asymmetrical to symmetrical interlayers can be observed. Based on the analysis of all measurements, we build up a model with four steps, which could explain the Al layer thickness transition process in terms of a critical thickness for the nucleation of Al(Pure) and Al(1%wtSi) crystallites.

36 MATERIALS SCIENCE↗

X-ray absorption spectroscopy and magnetic circular dichroism studies of L1{sub 0}-Mn-Ga thin films

Tetragonally distorted Mn{sub 3−x}Ga{sub x} thin films with 0.1<x<2 show a strong perpendicular magnetic anisotropy and low magnetization and thus have the potential to serve as electrodes in spin transfer torque magnetic random access memory. Because a direct capping of these films with MgO is problematic due to oxide formation, we examined the influence of a CoFeB interlayer and of two different deposition methods for the MgO barrier on the formation of interfacial Mn-O for Mn{sub 62}Ga{sub 38} by element specific X-ray absorption spectroscopy (XAS) and magnetic circular dichroism (XMCD). A highly textured L1{sub 0} crystal structure of the Mn-Ga films was verified by X-ray diffraction measurements. For samples with e-beam evaporated MgO barrier no evidence for Mn-O was found whereas in samples with magnetron sputtered MgO, Mn-O was detected, even for the thickest interlayer thickness. Both XAS and XMCD measurements showed an increasing interfacial Mn-O amount with decreasing CoFeB interlayer thickness. Additional element specific full hysteresis loops determined an out-of-plane magnetization axis for the Mn and Co, respectively.

36 MATERIALS SCIENCE↗

Role of spin mixing conductance in spin pumping: Enhancement of spin pumping efficiency in Ta/Cu/Py structures

From spin pumping measurements in Ta/Py devices for different thicknesses of Ta, we determine the spin Hall angle to be 0.021–0.033 and spin diffusion length to be 8 nm in Ta. We have also studied the effect of changing the properties of non-magnet/ferromagnet interface by adding a Cu interlayer. The experimental results show that the effective spin mixing conductance increases in the presence of Cu interlayer for Ta/Cu/Py devices whereas it decreases in Pt/Cu/Py devices. Our findings allow the tunability of the spin pumping efficiency by adding a thin interlayer at the non-magnet/ferromagnet interface.

36 MATERIALS SCIENCE↗

Current driven magnetization dynamics of a self-polarised synthetic ferrimagnet

Spin torque driven excitations in spin valves and tunnel junctions are often investigated for a two magnetic layer system for which a polarizer (fixed magnetization) and a free layer can be distinguished. In the search for improved microwave properties and to understand the role of different coupling mechanisms between the magnetic layers, here, the excitation spectrum of an exchange coupled two layer synthetic ferrimagnet (SyF) system is investigated numerically with spin momentum transfer acting on both layers simultaneously. This self-polarised two layer system does not contain an external polarizer, and excitation of coupled modes arises due to the mutual spin transfer torque and the Ruderman-Kittel-Kasuya-Yosida interlayer exchange coupling. The current-field state diagrams of static and dynamic states are reported as a function of the interlayer exchange coupling strength. The numerically determined critical boundaries are well reproduced by an analytical stability analysis. The dynamic steady states reveal an optic-like mode at low magnetic fields, which becomes progressively acoustic-like for increased magnetic fields and currents. The frequency of these modes can be tuned by the film thickness and the strength of the interlayer exchange interaction. The results presented here will provide an important guide for designing spin torque oscillators that exploit the dynamic coupling between layers and, furthermore, they will provide a basis to test analytical models of spin torque driven coupled excitations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Inter-layer potential for hexagonal boron nitride

A new interlayer force-field for layered hexagonal boron nitride (h-BN) based structures is presented. The force-field contains three terms representing the interlayer attraction due to dispersive interactions, repulsion due to anisotropic overlaps of electron clouds, and monopolar electrostatic interactions. With appropriate parameterization, the potential is able to simultaneously capture well the binding and lateral sliding energies of planar h-BN based dimer systems as well as the interlayer telescoping and rotation of double walled boron-nitride nanotubes of different crystallographic orientations. The new potential thus allows for the accurate and efficient modeling and simulation of large-scale h-BN based layered structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tunable MoS{sub 2} bandgap in MoS{sub 2}-graphene heterostructures

Using density functional theory calculations with van der Waals corrections, we investigated how the interlayer orientation affects the structure and electronic properties of MoS{sub 2}-graphene bilayer heterostructures. Changing the orientation of graphene with respect to MoS{sub 2} strongly influences the type and the value of the electronic bandgap in MoS{sub 2}, while not significantly altering the binding energy between the layers or the interlayer spacing. We show that the physical origin of this tunable bandgap arises from variations in the S–S interplanar distance (MoS{sub 2} thickness) with the interlayer orientation, variations which are caused by electron transfer away from the Mo–S bonds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transparent ITO/Ag-Pd-Cu/ITO multilayer cathode use in inverted organic solar cells

The characteristics of transparent ITO/Ag-Pd-Cu (APC)/ITO multilayer cathodes were investigated for use in inverted organic solar cells (IOSCs). The insertion of an APC interlayer into the ITO film effectively led to crystallization of the top ITO layer, unlike that in the Ag interlayer, and resulted in a low sheet resistance of 6.55 Ohm/square and a high optical transmittance of 84.14% without post annealing. In addition, the alloying of the Pd and Cu elements into Ag prevented agglomeration and oxidization of the metal interlayer and led to more stable ITO/APC/ITO films under ambient conditions. The microstructure and interfacial structure of the transparent ITO/APC/ITO cathode in the IOSCs were examined in detail by synchrotron X-ray scattering and high resolution transmission electron microscopy. Furthermore, we suggested a possible mechanism to explain the lower PCE of the IOSCs with an ITO/APC/ITO cathode than that of a reference IOSC with a crystalline ITO cathode using the external quantum efficiency of the IOSCs.

36 MATERIALS SCIENCE↗

Intra- and inter-layer charge redistribution in biased bilayer graphene

We investigate the spatial redistribution of the electron density in bilayer graphene in the presence of an interlayer bias within density functional theory. It is found that the interlayer charge redistribution is inhomogeneous between the upper and bottom layers and the transferred charge from the upper layer to the bottom layer linearly increases with the external voltage which further makes the gap at K point linearly increase. However, the band gap will saturate to 0.29 eV in the strong-field regime, but it displays a linear field dependence at the weak-field limit. Due to the AB-stacked way, two carbon atoms per unit cell in the same layer are different and there is also a charge transfer between them, making the widths of π valence bands reduced. In the bottom layer, the charge transfers from the direct atoms which directly face another carbon atom to the indirect atoms facing the center of the hexagon on the opposite layer, while the charge transfers from the indirect atoms to the direct atoms in the upper layer. Furthermore, there is a diploe between the upper and bottom layers which results in the reduction of the interlayer hopping interaction.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and characterization of immobilized Ni-Co bimetallic using Tapanuli clay for catalyst application

Heterogeneous catalysts hold various advantages, namely, easy to separate from their products, reusable and regarded as environmental friendly materials. The synthesis of immobilized Ni monometallic, Co monometallic and Ni-Co bimetallic by Tapanuli clay were carried out using intercalation method. Firstly, the synthesis of Na-Bentonite was conducted to provide sufficient area to immobilize bimetal in the clay interlayer. Secondly, Ni, Co and Ni-Co were immobilized in the Tapanuli clay interlayer. Several techniques, such as X-Ray Diffraction, Fourier Transform Infra Red and Energy Dispersive X-Ray Analysis were applied to characterize and compare the properties of the synthesized materials. The results showed that the insertion of Ni, Co and Ni-Co in the clay interlayer occurred through a cation exchange reaction. The Energy Dispersive X-Ray analysis for Ni-Co bimetallic showed that the immobilized Ni and Co in the clay is in the ratio of 1:1. Catalytic test with Gas Chromatography showed that Ni-Co bimetallic generates a higher yield percentage compared to Ni and Co monometallic.

36 MATERIALS SCIENCE↗

Switching characteristics for ferroelectric random access memory based on RC model in poly(vinylidene fluoride-trifluoroethylene) ultrathin films

The switching characteristic of the poly(vinylidene fluoride-trifluoroethlene) (P(VDF-TrFE)) films have been studied at different ranges of applied electric field. It is suggest that the increase of the switching speed upon nucleation protocol and the deceleration of switching could be related to the presence of a non-ferroelectric layer. Remarkably, a capacitor and resistor (RC) links model plays significant roles in the polarization switching dynamics of the thin films. For P(VDF-TrFE) ultrathin films with electroactive interlayer, it is found that the switching dynamic characteristics are strongly affected by the contributions of resistor and non-ferroelectric (non-FE) interface factors. A corresponding experiment is designed using poly(3,4-ethylene dioxythiophene):poly(styrene sulfonic) (PEDOT-PSSH) as interlayer with different proton concentrations, and the testing results show that the robust switching is determined by the proton concentration in interlayer and lower leakage current in circuit to reliable applications of such polymer films. These findings provide a new feasible method to enhance the polarization switching for the ferroelectric random access memory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗