Search NASA⌕ Search

SEARCH · Search NASA

Results for “intermittency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Hydride-Based Solid Oxide Fuel Cell–Battery Hybrid Electrochemical System

The deployment of renewable energy technologies, such as solar photovoltaics and wind turbines, poses challenges in terms of electricity grid stability due to the intermittent nature of such energy sources, which creates a need for innovative storage solutions. We demonstrate a metal hydride-based hybrid electrochemical system that enables a solid-oxide fuel cell to operate in both fuel cell mode and battery mode, allowing for un-interrupted electricity generation. In the fuel cell mode, the device acts as a conventional fuel cell and converts the chemical energy stored in fuels into electrical energy. In the battery mode, the metal hydride near the anode releases hydrogen and quickly responds to fuel supply interruption or power demand surges. The concept demonstrated here is a promising way to provide a robust and economical solution for balancing power supply and demand for the electrical grid of the future.

25 ENERGY STORAGE↗

Operational Limits of Redox Metal Oxides Performing Thermochemical Water Splitting

Solar thermochemical hydrogen production is an attractive technology that stores intermittent solar energy in the form of chemical bonds. Efficient operation requires the identification of a redox-active metal oxide (MO x ) material that can achieve high conversion of water to hydrogen at minimal energy input. Water splitting occurs by consecutive reduction and reoxidation reactions of MO x . MO x is reduced to MO x-δ and, in the second step, is reoxidized by water recovering the initial MO x and generate H 2 . The material must reduce at temperatures achievable in concentrated solar receiver/reactors, while maintaining a thermodynamic driving force to split water. At equilibrium, extent of reduction depends on temperature and oxygen partial pressure, and in this analysis, a set of thermodynamic properties, namely, enthalpy and entropy of oxygen vacancy formation, is sufficient to represent MO x . Herein, a method to easily classify materials based on these thermodynamic properties under any condition of oxygen partial pressure and temperature is presented. This method is based on fundamental thermodynamic principles and is applicable for any redox material with known thermodynamic properties. Despite the simplicity of the method, it is believed that this analysis will support future research in targeting thermodynamic properties of redox-active metal oxides.

water splitting↗

Variability in observed stable water isotopes in snowpack across a mountainous watershed in Colorado

In this study, isotopic information from 81 snowpits was collected over a 5-year period in a large, Colorado watershed. Data spans gradients in elevation, aspect, vegetation, and seasonal climate. They are combined with overlapping campaigns for water isotopes in precipitation and snowmelt, and a land-surface model for detailed estimates of snowfall and climate at sample locations. Snowfall isotopic inputs, describe the majority of δ18O snowpack variability. Aspect is a secondary control, with slightly more enriched conditions on east and north facing slopes. This is attributed to preservation of seasonally enriched snowfall and vapour loss in the early winter. Sublimation, expressed by decreases in snowpack d-excess in comparison to snowfall contributions, increases at low elevation and when seasonal temperature and solar radiation are high. At peak snow accumulation, post-depositional fractionation appears to occur in the top 25 ± 14% of the snowpack due to melt-freeze redistribution of lighter isotopes deeper into the snowpack and vapour loss to the atmosphere during intermittent periods of low relative humidity and high windspeed. Relative depth of fractionation increases when winter daytime temperatures are high and winter precipitation is low. Once isothermal, snowpack isotopic homogenization and enrichment was observed with initial snowmelt isotopically depleted in comparison to snowpack and enriching over time. The rate of δ18O increase (d-excess decrease) in snowmelt was 0.02‰ per day per 100-m elevation loss. Isotopic data suggests elevation dictates snowpack and snowmelt evolution by controlling early snow persistence (or absence), isotopic lapse rates in precipitation and the ratio of energy to snow availability. Hydrologic tracer studies using stable water isotopes in basins of large topographic relief will require adjustment for these elevational controls to properly constrain stream water sourcing from snowmelt.

54 ENVIRONMENTAL SCIENCES↗

Modification of polyurethane to reduce occlusion of enteral feeding tubes

Feeding tubes are used to supply nutritional formula to immobilized patients. The most common cause for failure of enteral feeding tubes is their occlusion. The purpose of this study was to examine whether occlusion of enteral feeding tubes could be minimized using an additive. An open, intermittent enteral feeding system was simulated in the laboratory and data was collected over a period ranging from 2 to 6 days. Feeding formula was cycled through a feeding tube in either the presence or absence of simulated gastric acid in an effort to generate a reproducible occlusion. Pressures in the tube were measured frequently throughout these cycles. We observed pressure spikes with each cycle, but never a complete occlusion. Pressure spikes formed only when simulated gastric acid was mixed with the feeding solution. Large amounts of feeding formula adsorbed onto polyurethane surfaces in the presence of gastric acid. The maximum pressure was reduced by about half from 2.0 psi to 0.8 psi when polyvinyl alcohol (PVA) was added. The addition of PVA to polyurethane also reduced the contact angle from 83° (untreated) to approximately 64° in the presence of PVA. Furthermore, when formula was added to polyurethane in the presence of PVA the thickness of the layer that remained on the surface was almost 10 times greater in controls than on PVA-treated surfaces. These results suggest that a treatment that increases the hydrophilicity of the feeding tube may help minimize clogging.

36 MATERIALS SCIENCE↗

Detection and classification capabilities of two multibeam sonars

Multibeam sonars can be used to detect and classify marine fauna under conditions when optical sensors are ineffective. In this work, we compare the detection and classification capabilities of two multibeam sonars with different operating frequencies, the Tritech Gemini 720is (720 kHz) and the Teledyne BlueView M900-2250 (2250 kHz). The two sonars were deployed with overlapping swaths in a narrow tidal channel with peak currents of approximately 2 m/s where seals, schools of fish, and diving birds were intermittently present. In comparing data concurrently acquired by both sonars, we observe differences in the appearance of detected targets and detection capabilities. The detected target tracks are classified using a random forest model as either individual biological targets (flora and fauna, including fish, diving birds, seals, and plant matter), fish schools, or nonbiological targets (including entrained air and sonar artifacts). Despite the observed differences in detection capabilities for the two sonars, automatic classification distinguishes between target classes with precision and recall above 0.7 and 0.9, respectively. Furthermore, these results suggest that while similar methodologies can be used for data analysis, some outcomes from environmental studies using multibeam sonars may be instrument-specific.

16 TIDAL AND WAVE POWER↗

Permeation of CO 2 and N 2 through glassy poly(dimethyl phenylene) oxide under steady- and presteady-state conditions

Glassy polymers are often used for gas separations because of their high selectivity. Although the dual-mode permeation model correctly fits their sorption and permeation isotherms, its physical interpretation is disputed, and it does not describe permeation far from steady state, a condition expected when separations involve intermittent renewable energy sources. To develop a more comprehensive permeation model, we combine experiment, molecular dynamics, and multiscale reaction–diffusion modeling to characterize the time-dependent permeation of N 2 and CO 2 through a glassy poly(dimethyl phenylene oxide) membrane, a model system. Simulations of experimental time-dependent permeation data for both gases in the presteady-state and steady-state regimes show that both single- and dual-mode reaction–diffusion models reproduce the experimental observations, and that sorbed gas concentrations lag the external pressure rise. The results point to environment-sensitive diffusion coefficients as a vital characteristic of transport in glassy polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparative Study of Clustering Techniques for Real-Time Dynamic Model Reduction

Dynamic model reduction in power systems is necessary for improving computational efficiency. Traditional model reduction using linearized models or offline analysis would not be adequate to capture power system dynamic behaviors, especially the new mix of intermittent generation and intelligent consumption makes the power system more dynamic and non-linear. Real time dynamic model reduction emerges as an important need. This paper explores the use of clustering techniques to analyze real-time phasor measurements to determine generator groups and representative generators for dynamic model reduction. Two clustering techniques – graph clustering and evolutionary clustering – are studied in this paper. Various implementations of these techniques are compared and also compared with a previously developed Singular Value Decomposition (SVD)-based dynamic model reduction approach. Various methods exhibit different levels of accuracy when comparing the reduced model simulation against the original model. But some of them are consistently accurate. From this comparative perspective, this paper provides a good reference point for practical implementations.

model reduction, graph clustering, svd, evolutiona↗

Ionic Liquid–Directed Nanoporous TiNb 2 O 7 Anodes with Superior Performance for Fast–Rechargeable Lithium–Ion Batteries

Nanoporous TiNb 2 O 7 (NPTNO) material is synthesized by a sol–gel method with an ionic liquid (IL) as the nanoporous structure directing template. NPTNO exhibits a high reversible capacity of 210 mAh g –1 even at the charging rate of 50 C and an excellent cyclability of half-cell capacity retention of 74% for 1000 cycles at 5 C and LiNi 0.5 Mn 1.5 O 4 -coupled full-cell capacity retentions of 81% and 87% for 1000 cycles at 1 C and 2 C, respectively. The studies of the 1000 cycled NPTNO electrode illustrate that the IL-directed mesoporous structure can enhance the cyclability of NPTNO cells due to the alleviation of repetitive mechanical stress and volume fluctuation induced by the repetitive Li + insertion-extraction processes. The measured Li + diffusion coefficients from the galvanostatic intermittent titration technique suggest that the IL-templating strategy indeed ensures the fast rechargeability of NPTNO cells based on the fast Li + diffusion kinetics. Benefitting from the nanoporous structure, NPTNO with unhindered Li + diffusion pathways achieves a superior rate capability in the titanium-based oxide materials and the best full-cell cyclability in the TNO materials. Furthermore, the templating potential of IL is demonstrated, and the superb electrochemical performance establishes the IL-directed NPTNO as a promising anode candidate for fast-rechargeable LIBs.

25 ENERGY STORAGE↗

Design of an Online Electrochemical Mass Spectrometry System to Study Gas Evolution from Cells with Lean and Volatile Electrolytes

Gas evolution in high-energy Li-ion batteries remains a pervasive problem for a multitude of chemistries, jeopardizing the electrochemical performance and safety for consumers of electric vehicles. Many electrode–electrolyte degradation processes evolve gasses that may be detected in-situ with online electrochemical mass spectrometry (OEMS). In this work, details are provided for the setup and validation of an OEMS system that operates well under lean and volatile electrolyte conditions. Quite notably, the OEMS cells with only 40 µL of electrolyte and intermittent headspace sampling exhibit comparable electrochemical performance to flooded coin-cells. It is demonstrated that the onset time, shape, and magnitude of the gas evolution profiles calculated from mass spectrometer measurements match well to a known pressure reference through the use of an empirically determined fraction of removal. The off-gassing characteristics from a set of layered-oxide materials, NMC532, NMC811, and LNO, are used to further validate the OEMS setup against the literature. It is shown that many of the features present in the OEMS curves for equivalent systems from other groups are captured by this OEMS system. Finally, at an upper cut-off voltage of 4.4 V, LNO exhibits an intense release of CO 2 , O 2 , and CO gas relative to NMC532 and NMC811.

25 ENERGY STORAGE↗

Rainfall trends in the African Sahel: Characteristics, processes, and causes

Abstract Sahel rainfall is dynamically linked to the global Hadley cell and to the regional monsoon circulation. It is therefore susceptible to forcings from remote oceans and regional land alike. Warming of the oceans enhances the stability of the tropical atmosphere and weakens deep ascent in the Hadley circulation. Warming of the Sahara and of the nearby oceans changes the structure and position of the regional shallow circulation and allows more of the intense convective systems that determine seasonal rain accumulation. These processes can explain the observed interannual to multidecadal variability. Sea surface temperature anomalies were the dominant forcing of the drought of the 1970s and 1980s. In most recent decades, seasonal rainfall amounts have partially recovered, but rainy season characteristics have changed: rainfall is more intense and intermittent and wetting is concentrated in the late rainy season and away from the west coast. Similar subseasonal and subregional differences in rainfall trends characterize the simulated response to increased greenhouse gases, suggesting an anthropogenic influence. While uncertainty in future projections remains, confidence in them is encouraged by the recognition that seasonal mean rainfall depends on large‐scale drivers of atmospheric circulations that are well resolved by current climate models. Nevertheless, observational and modeling efforts are needed to provide more refined projections of rainfall changes, expanding beyond total accumulation to metrics of intraseasonal characteristics and risk of extreme events, and coordination between climate scientists and stakeholders is needed to generate relevant information that is useful even under deep uncertainty. This article is categorized under: Paleoclimates and Current Trends > Modern Climate Change

54 ENVIRONMENTAL SCIENCES↗

Idealized Offshore Low‐Level Jets for Turbine Structural Impact Considerations

Low-level jets (LLJs) describe conditions in which the wind speed reaches a local maximum with respect to altitude near the surface; they have been observed intermittently in the US mid-Atlantic offshore environment. LLJs pose unique operating conditions for future wind turbines operating in the region, such as negative shear and locally strong veer, but they are not typically considered in existing turbine standards. This work builds upon recent research that explains the formation and evolution of the US mid-Atlantic LLJs through a simple analytical governing equation. We generate several LLJ inflow conditions with varying jet characteristics based on this analytical model and create monotonically sheared (MS) analogues with matched veer to assess the impacts of the LLJ on turbine performance and loading. Using aeroelastic simulations with these inflow conditions on the International Energy Agency 15-MW reference turbine, we find that the LLJ leads to a greater range of tower-top pitching and yawing moments, which could contribute to larger accumulated structural fatigue in components compared to MS inflow. These preliminary results demonstrate a path toward a unified set of test cases for low-level wind maxima that can inform the International Electrotechnical Commission standards related to offshore wind turbine design.

17 WIND ENERGY↗

Renewable Generation, Integration of

The integration of renewable generation consists of all of the changes in power system operations that are required in order to allow renewable generation sources to play a significant role in the electricity system. The impacts are mostly due to variable generation (VG), like wind and solar power. Historically these technologies have been labeled as intermittent generation, but recent trendsprefer the label variable generation. Variable generators have a maximum available generation limit that changes with time (variability) and this limit is not known with perfect accuracy (uncertainty). This uncertainty and variability is in addition to that of the existing system and can therefore create additional challenges for grid operators to maintain their current levels of reliability.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Renewable Generation, Integration of

The integration of renewable generation consists of all of the changes in power system operations that are required in order to allow renewable generation sources to play a significant role in the electricity system. The impacts are mostly due to variable generation (VG), like wind and solar power. Historically these technologies have been labeled as intermittent generation, but recent trends prefer the label variable generation. Variable generators have a maximum available generation limit that changes with time (variability) and this limit is not known with perfect accuracy (uncertainty). This uncertainty and variability is in addition to that of the existing system and can therefore create additional challenges for grid operators to maintain their current levels of reliability.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Recent Developments and Trends in Redox Flow Batteries

Stationary energy storage systems are needed to facilitate the widespread integration of intermittent renewable electricity generators, such as solar photovoltaic and wind turbines, and to improve the energy efficiency of the electrical grid. While no single technology can meet all needs, redox flow batteries (RFBs) have shown a favorable balance of cost, safety, and performance for many high-value applications. RFBs are rechargeable electrochemical devices that utilize the reversible redox reactions of two soluble electroactive species for energy storage. A compelling feature of the RFB configuration is the independent scaling of power and energy which enables cost-effective implementation of electrochemical couples with low energy density. Aqueous RFBs have been the subject of the vast majority of research efforts to date, which have yielded industry-level demonstrations. By comparison, non-aqueous RFBs are still in their infancy but have the potential for high energy density due to the extended stability window of non-aqueous electrolytes and the enriched selection of redox materials due to the broad variety of organic solvents. This chapter aims to introduce emerging, potentially transformative, strategies for enhancing RFB technologies through molecular design, electrolyte development, and cell-level engineering. Detailed discussions focus on recent developments in redox active materials (inorganic – aqueous, organic – aqueous, inorganic – non-aqueous, and organic – non-aqueous) and in system design (interdigitated flow fields, semi-solid flow cells, and hybrid flow cells). Future research directions and key challenges for RFB technologies are also highlighted.

Su, Liang↗

The Adsorption Behavior of Atrazine in Common Soils in Northeast China

The objective of this study was to evaluate the adsorption capacity of atrazine and the effects of different environmental conditions such as temperature, pH, Ca{sup 2+} and biochar on the adsorption characteristics of atrazine in different types of soil using the intermittent adsorption method. The kinetic experiment showed that the adsorption of atrazine in albic, black and saline–alkaline soils reached equilibrium within 24 h. In the thermodynamics experiment, the Freundlich model effectively described the adsorption characteristics of atrazine in all three types of soil, indicating that the adsorption process forms multi-molecular layers. Lower soil pH conditions were more favorable for the absorption of atrazine. The addition of appropriate concentrations of Ca{sup 2+} or biochar could promote the adsorption of atrazine by the soil. Biochar could promote the fixation of atrazine in soils.

54 ENVIRONMENTAL SCIENCES↗

Solar Energy Development and Aquatic Ecosystems in the Southwestern United States: Potential Impacts, Mitigation, and Research Needs

The cumulative impacts of utility-scale solar energy facilities on aquatic ecosystems in the Southwestern United States are of concern, considering the many existing regional anthropogenic stressors. We review the potential impacts of solar energy development on aquatic habitat and biota. The greatest potential for impacts is related to the loss, fragmentation, or prolonged drying of ephemeral water bodies and drainage networks resulting from the loss of desert washes within the construction footprint of the facility. Groundwater-dependent aquatic habitat may also be affected by operational groundwater withdrawal in the case of water-intensive solar technologies. Solar panels have also been found to attract aquatic insects and waterbirds, potentially resulting in mortality. Avoiding construction activity near perennial and intermittent surface waters is the primary means of reducing impacts on aquatic habitats, followed by measures to minimize erosion, sedimentation, and contaminant inputs into waterways. Currently, significant data gaps make solar facility impact assessment and mitigation more difficult. Examples include the need for more regional and site-specific studies of surface–groundwater connectivity, more detailed maps of regional stream networks and riparian vegetation corridors, as well as surveys of the aquatic communities inhabiting ephemeral streams. In addition, because they often lack regulatory protection, there is also a need to develop valuation criteria for ephemeral waters based on their ecological and hydrologic function within the landscape. By addressing these research needs, we can achieve the goal of greater reliance on solar energy, while at the same time minimizing impacts on desert ecosystems.

Grippo, Mark↗

Portal Vein Embolization with Radiolabeled Polyvinyl Alcohol Particles in a Swine Model: Hepatic Distribution and Implications for Pancreatic Islet Cell Transplantation

The distribution of radiolabeled polyvinyl alcohol microspheres (PVAMs) when infused into the portal vein of domestic swine was investigated, with the purpose of assessing implications for pancreatic islet cell transplantation. PVAMs measuring 100-300 {mu}m (Contour SE) and labeled with {sup 99m}Tc were infused into the main portal vein of 12 swine, with intermittent portal venous pressure measurements. The infusion catheter was introduced antegradely via direct or indirect cannulation of the portal vein. The liver was subsequently divided into anatomical segments. Radioactivity (decay corrected) was measured for {sup 99m}Tc microsphere synthesis, dose preparation, gross organ activities, tissue samples, and blood. Particulate labeling, catheter positioning, and infusion were successful in all cases. The number of particles used was (185,000 {+-} 24,000) with a volume of 1 ml. Mean portal pressure at 5 min was significantly higher than baseline, but without a significant difference at 15 min. Extrahepatic tissue and serum radioactivity was negligible. A significant difference in number of radioactive particles per gram was detected between segments 6/7 and segments 5/8. Intrasegmental activity was analyzed, and for segments 2/3 a significant difference in the percentage dose per gram across samples was demonstrated (P = 0.001). Effective and stable radiolabeling of PVAMs with {sup 99m}Tc-sulfur colloid was demonstrated. Portal venous infusion of 100- to 300-{mu}m particles showed entrapment in the sinusoidal hepatic system with transient portal pressure elevation. Preferential embolization into the right lateral and posterior segments occurs, suggesting that flow dynamics/catheter tip position plays a role in particle distribution.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Unusual Malignant Coronary Artery Anomaly: Results of Coronary Angiography, MR Imaging, and Multislice CT

We report the case of a man with an uncommon anomaly of the origin and course of the left coronary artery. Clinical, coronary angiography, magnetic resonance imaging, and multislice computed tomography findings of this intermittently symptomatic 49 year-old patient with the rare anomaly of his left coronary artery stemming from the right sinus of Valsalva and taking an interarterial and intraseptal course are presented. The diagnostic value of the different imaging modalities is discussed.

62 RADIOLOGY AND NUCLEAR MEDICINE↗