Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Maximizing ion dynamics and electrochemical performance of ionic liquid-acetonitrile electrolyte in Ti 3 C 2 T x MXene

Modification of the structure and morphology of MXene electrodes and the formulation of the electrolytes used in their supercapacitor configurations are significant factors affecting the performance of electrochemical devices. In this study, we investigated the electrochemical performance and ion dynamics of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [EmimTFSI], ionic liquid in the presence of acetonitrile (ACN) at different concentrations in Ti 3 C 2 T x MXene supercapacitor. We found an optimum concentration of ACN, at which more cations from the ionic liquid attach to the MXene electrode surface, providing higher electrochemical performance. This higher capacitance is also associated with increased microscopic dynamics of the cation away from the pore wall. These findings give a guideline to optimize the performance of MXene-based supercapacitors using organic solvents-ionic liquid-based electrolyte systems.

36 MATERIALS SCIENCE↗

Ionic switch controls the DNA state in phage λ

We have recently found that DNA packaged in phage λ undergoes a disordering transition triggered by temperature, which results in increased genome mobility. This solid-to-fluid like DNA transition markedly increases the number of infectious λ particles facilitating infection. However, the structural transition strongly depends on temperature and ionic conditions in the surrounding medium. Using titration microcalorimetry combined with solution X-ray scattering, we mapped both energetic and structural changes associated with transition of the encapsidated λ-DNA. Packaged DNA needs to reach a critical stress level in order for transition to occur. We varied the stress on DNA in the capsid by changing the temperature, packaged DNA length and ionic conditions. We found striking evidence that the intracapsid DNA transition is ‘switched on’ at the ionic conditions mimicking those in vivo and also at the physiologic temperature of infection at 37°C. This ion regulated on-off switch of packaged DNA mobility in turn affects viral replication. The results suggest a remarkable adaptation of phage λ to the environment of its host bacteria in the human gut. The metastable DNA state in the capsid provides a new paradigm for the physical evolution of viruses.

59 BASIC BIOLOGICAL SCIENCES↗

Pressure-induced loss of electronic interlayer state and metallization in the ionic solid Li[subscript 3]N: Experiment and theory

Results of x-ray diffraction and nitrogen K-edge x-ray Raman scattering (XRS) investigations of the crystal and electronic structure of ionic compound Li{sub 3}N across two high-pressure phase transitions [A. Lazicki et al., Phys. Rev. Lett. 95, 165503 (2005)] are interpreted using density-functional theory. A low-energy peak in the XRS spectrum which is observed in both low-pressure hexagonal phases of Li3N and absent in the high-pressure cubic phase is found to originate from an interlayer band similar to the important free-electron-like state present in the graphite and graphite intercalated systems, but not observed previously in ionic insulators. XRS detection of the interlayer state is made possible because of its strong hybridization with the nitrogen p bands. A pressure-induced increase in the band gap of the high-pressure cubic phase of Li{sub 3}N is explained by the differing pressure dependencies of different quantum-number bands and is shown to be a feature of several low-Z closed-shell ionic materials.

36 MATERIALS SCIENCE↗

Transient Nonlinear Response of Dynamically Decoupled Ionic Conductors

The present study demonstrates that large electric fields progressively enhance the conductivity of ionic systems up to timescales corresponding to those on which their structural rearrangements take place. Here, in many ionic materials, some regarded as candidates for electrical energy storage applications, the structural relaxation process can be tremendously slower than (or highly decoupled from) the charge fluctuations. Consequently, nonlinear dielectric spectroscopy may be employed to access rheological information in dynamically decoupled ionic conductors, whereas the combination of large electric power density and good mechanical stability, both technologically highly desired, imposes specific experimental constraints to reliably determine the steady-state conductivity of such materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of a machine-learning-based ionic-force correction model for quantum molecular dynamic simulations of warm dense matter

In this work Δ learning is used to map orbital-free density functional theory (OF-DFT) ionic forces to the corresponding Kohn-Sham (KS) DFT ionic forces. The development of the approximate force difference in terms of the ion positions is constructed and serves as a stand in for the ground truth force difference. Descriptor vectors for ion configurations are constructed using all distance between ions in conjunction with an indexing based on a nearest neighbor ranking. It is demonstrated that such a scheme of descriptors can uniquely describe an ionic configuration up to a rotation and reflection when no ambiguity in the nearest neighbor ranking exists. How to handle the case when an ambiguity exists in the nearest neighbor ranking is discussed. As a proof of principle, the model is trained and tested on warm dense hydrogen at temperatures between 1 and 15 eV. Once tested, the model was used to perform molecular dynamic simulations of warm dense hydrogen. Furthermore, the resulting energies and pressures are within 1% and 2% of their respective target KS values.

36 MATERIALS SCIENCE↗

Electrochemical Polishing Applications and EIS of a Novel Choline Chloride-Based Ionic Liquid

Minimal surface roughness is a critical feature for high-field superconducting radio frequency (SRF) cavities used to engineer particle accelerators. Current methods for polishing Niobium cavities typically utilize solutions containing a mixture of concentrated sulfuric and hydrofluoric acid. Polishing processes such as these are effective, yet there are many hazards and costs associated with the use (and safe disposal) of the concentrated acid solutions. An alternative method for electrochemical polishing of the cavities was explored using a novel ionic liquid solution containing choline chloride. Potentiostatic electrochemical impedance spectroscopy (EIS) was used to analyze the ionic polishing solution. Final surface roughness of the Nb was found to be comparable to that of the acid-polishing method, as assessed by atomic force microscopy (AFM). This indicates that ionic liquid-based electrochemical polishing of Nb is a viable replacement for acid-based methods for preparation of SRF cavities.

36 MATERIALS SCIENCE↗

The Effect of Lengthening Cation Ether Tails on Ionic Liquid Properties

In order to explore the effect of multiple ether functionalities on ionic liquid properties, a series of ten pyrrolidinium ionic liquids and ten imidazolium ionic liquids bearing ether and alkyl side chains of varying lengths (4 to 10 atoms in length) were prepared for this study. Their physical properties, such as viscosity, conductivity and thermal profile were measured and compared. Consistent with earlier literature, a single ether substituent substantially decreases the viscosity of pyrrolidinium and imidazolium ILs compared to their alkyl congeners. Remarkably, as the number of ether units in the pyrrolidinium ILs increases there is hardly any increase in the viscosity, in contrast to alkylpyrrolidinium ILs where the viscosity increases steadily with chain length. Viscosities of imidazolium ether ILs increase with chain length but always remain well below their alkyl congeners. These results provide significant insight on the choice of starting materials for researchers designing ILs for specific applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic liquid versus SiO 2 gated a-IGZO thin film transistors: A direct comparison

Here, ionic liquid gated field effect transistors have been extensively studied due to their low operation voltage, ease of processing and the realization of high electric fields at low bias voltages. Here, we report ionic liquid (IL) gated thin film transistors (TFTs) based on amorphous Indium Gallium Zinc Oxide (a-IGZO) active layers and directly compare the characteristics with a standard SiO 2 gated device. The transport measurements of the top IL gated device revealed the n-channel property of the IGZO thin film with a current ON/OFF ratio ~10 5 , a promising field effect mobility of 14.20 cm 2 V –1 s –1 , and a threshold voltage of 0.5 V. Comparable measurements on the bottom SiO2 gate insulator revealed a current ON/OFF ratio >108, a field effect mobility of 13.89 cm 2 V –1 s –1 and a threshold voltage of 2.5 V. Furthermore, temperature-dependent measurements revealed that the ionic liquid electric double layer can be “frozen-in” by cooling below the glass transition temperature with an applied electrical bias. Positive and negative freezing bias locks-in the IGZO TFT “ON” and “OFF” state, respectively, which could lead to new switching and possibly non-volatile memory applications.

36 MATERIALS SCIENCE↗

Towards Mixed Ionic and Electronic Conducting Li-Stuffed Garnets

Li-stuffed garnet-type Li 7 La 2.75 Ca 0.25 Zr 1.75 Nb 0.25 O 12 (LLCZNO) and Li 7+y La 2.75 Ca 0.25 Zr 1.75-y Nb 0.25 MyO 12 (M = Mn, Fe, Co, Ni; y = 0.1, 0.2, referred to as yM-LLCZNO) were synthesized in air by ceramic synthesis at different sintering temperatures. The resulting compositions were characterized for their phase formation and microstructure, and their ionic and electronic conductivities in air and 7% H 2 /N 2 . Powder X-ray diffraction showed that transition metal-doped LLCZNO garnets contain several impurity phases. The transition metal-substituted samples have lower conductivities than that of the parent LLCZNO. The electronic conductivities of selected transition metal-doped LLCZNO samples were found to be about 4 to 5 orders of magnitude lower than their corresponding ionic conductivity, highlighting the challenge to design single-phase mixed electronic and ionic conducting Li-stuffed garnets in both oxidizing and reducing atmospheres. The research area of single-phase mixed conducting Li-garnet is relatively unexplored at the moment, and a theoretical study will help to elucidate the underlying challenge in doping transition metal in Li-based garnets structure and its effect on transport properties.

25 ENERGY STORAGE↗

Uranyl oxalate species in high ionic strength environments: stability constants for aqueous and solid uranyl oxalate complexes

Uranyl ion, UO 2 2+ , and its aqueous complexes with organic and inorganic ligands can be the dominant species for uranium transport on the Earth surface or in a nuclear waste disposal system if an oxidizing condition is present. As an important biodegradation product, oxalate, C 2 O 4 2– , is ubiquitous in natural environments and is known for its ability to complex with the uranyl ion. Oxalate can also form solid phases with uranyl ion in certain environments thus limiting uranium migration. Therefore, the determination of stability constants for aqueous and solid uranyl oxalate complexes is important not only to the understanding of uranium mobility in natural environments, but also to the performance assessment of nuclear waste disposal. In this work, we developed a thermodynamic model for the UO 2 2+ –Na + –H + –Cl – –ClO 4 – –C 2 O 4 2– –NO 3 – –H 2 O system to ionic strength up to ~11 mol•kg –1 . We constrained the stability constants for UO 2 C 2 O 4 (aq) and UO 2 (C 2 O 4 ) 2 2– at infinite dilution based on our evaluation of the literature data over a wide range of ionic strengths up to ~11 mol•kg –1 . We also obtained the solubility constants at infinite dilution for solid uranyl oxalates, UO 2 C 2 O 4 •3H 2 O, based on the solubility data over a wide range of ionic strengths. The developed model will enable for the accurate stability assessment of oxalate complexes affecting uranium mobility under a wide range of conditions including those in deep geological repositories.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Sorption kinetics and impact of temperature, ionic strength and colloid concentration on the adsorption of plutonium-239 by inorganic colloids

Plutonium (Pu) is one of the primary actinides of concern for long-term disposal and storage of nuclear waste. Strong sorption of Pu onto colloids of iron oxide, clay, and silica could result in colloid-facilitated transport of this actinide in groundwater systems. However, fundamental data on Pu sorption to colloids is sparse, resulting in large uncertainties in long-term predictions of colloid-facilitated Pu transport. This sparseness of data and the potential to significantly reduce uncertainties in predictive models served as a motivation for this study. The authors investigated the sorption and desorption behaviors of 239Pu(V) on three types of inorganic colloids (hematite, montmorillonite and silica), with adsorption being measured as a function of temperature, ionic strength and colloid concentration for each colloid. Natural ground water collected from Well-13 near Yucca Mountain, Nevada, and synthetic ground water (SYN.J-13) were used in the experiments. The results indicated that the adsorption of 239Pu(V) onto hematite colloids was faster and had a higher partition coefficient (Kp, ml g-1) than onto montmorillonite or silica colloids in both J-13 and SYN.J-13 waters. Temperature did not significantly influence the adsorption of 239Pu(V) onto hematite and silica colloids, but the adsorption of 239Pu(V) onto montmorillonite colloids increased significantly with increasing temperature. While ionic strength did not significantly influence the adsorption of 239Pu(V) onto hematite colloids, an increase in ionic strength decreased the adsorption of 239Pu onto montmorillonite and silica colloids. Adsorption of 239Pu(V) per unit mass of colloid was much higher at low colloid concentrations than at high colloid concentrations. Desorption of 239Pu from 239Pu-loaded colloids was considerably slower than the adsorption process.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Electrochemical strain microscopy: Probing ionic and electrochemical phenomena in solids at the nanometer level

Atomistic and nanometer scale mechanisms of electrochemical reactions and ionic flows in solids in the nanometer-micron range persist as terra incognito in modern science. While structural and electronic phenomena are now accessible to electron and scanning probe microscopy (SPM) techniques, probing nanoscale electrochemistry requires the capability to probe local ionic currents. Here, we discuss principles and applications of electrochemical strain microscopy (ESM), a technique based on probing minute deformations induced by electric bias applied to an SPM tip. ESM imaging and spectroscopy are illustrated for several energy storage and conversion materials. We further argue that down-scaling of physical device structures based on oxides necessitates ionic and electrochemical effects to be taken into account. Future pathways for ESM development are discussed

Jesse, Stephen↗

Structuring, stochastic behavior, and charge storage capacity of redox-active microemulsions formulated with mixtures of toluene and ionic liquid as oil phase

Oil/water microemulsions (µEs) are promising electrolytes for redox flow batteries (RFBs) as they simultaneously improve charge capacity and ionic conductivity. Here, we report the successful formulation of bicontinuous µEs where the oil phase is a solution of trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl)amide ionic liquid in toluene with redox-active ferrocene. We examined the effect of supporting electrolyte anion (NO 3 – , Cl – , ClO 4 – ) on the structure, reactivity, transport, and electrolytic performance of redox-active µEs. Neutron scattering and nuclear magnetic resonance showed that the domain size increased as Cl – > NO 3 – > ClO 4 – while the ferrocene diffusion coefficient increased as NO 3 – > Cl – > ClO 4 – . Scanning electrochemical microscopy indicated anion-dependent current fluctuations during electrolysis, with ClO 4 – exhibiting the least high-frequency oscillations, which correlate to the highest charge and discharge capacity and reversibility. All ionic liquid containing systems improved the performance of toluene-based µEs, highlighting new design principles for these electrolytes.

diffusion↗

Pore-Scale Oil Connectivity and Displacement by Controlled-Ionic-Composition Waterflooding Using Synchrotron X-Ray Microtomography

Controlled-ionic-composition waterflooding is an economic and effective method to improve oil recovery in carbonate oil reservoirs. Recent studies show controlling the salinity and ionic composition of injection water can alter the wettability of carbonate mineral surfaces. The pore-scale oil connectivity and displacement by controlled-ionic-composition waterflooding in heterogeneous carbonate reservoirs, especially at the early stage, is still unclear. The goal of this study is to examine the role of ion concentrations and types in the oil displacement efficiency and investigate the impact of the waterflooding on the pore-scale oil displacement using the national synchrotron facility. A carbonate rock sample was flooded with synthetic high-salinity water and other water solutions with different sulfate concentrations. The waterflooding processes were visualized with synchrotron X-ray microtomography to follow the evolution of pore-scale oil/brine interactions at typical field flow rates. Experimental results show that the water with lower sulfate concentration and higher salinity did not change the wettability of the pore surfaces. Higher sulfate ion concentrations in the water, in contrast, altered the wettability of carbonate pore surfaces from oil-wet to neutral-wet within the first few minutes of waterflooding. Finally, novel insight was gained on the ability of water with high-sulfate concentration to displace oil in the small pores and through abundant oil channels, which could consequently lead to higher oil recovery from the carbonate rock.

04 OIL SHALES AND TAR SANDS↗

Structural simulations of nanomaterials self-assembled from ionic macrocycles.

Recent research at Sandia has discovered a new class of organic binary ionic solids with tunable optical, electronic, and photochemical properties. These nanomaterials, consisting of a novel class of organic binary ionic solids, are currently being developed at Sandia for applications in batteries, supercapacitors, and solar energy technologies. They are composed of self-assembled oligomeric arrays of very large anions and large cations, but their crucial internal arrangement is thus far unknown. This report describes (a) the development of a relevant model of nonconvex particles decorated with ions interacting through short-ranged Yukawa potentials, and (b) the results of initial Monte Carlo simulations of the self-assembly binary ionic solids.

14 SOLAR ENERGY↗

Ionic Liquids: Breakthrough Absorption Technology for Post-Combustion CO 2 Capture

This is the final report for DE-FC26-07NT43091 Ionic Liquids: Breakthrough Absorption Technology for Post-Combustion CO 2 Capture. A detailed summary is provided of the ionic liquid (IL) discovery process, synthesis and testing results, process / systems modeling, lab-scale operational testing, corrosion testing and commercialization possibilities. The work resulted in the discovery of a new class of ionic liquids (ILs) that efficiently react with CO 2 in a 1:1 stoichiometry with no water present and no increase in viscosity. The enthalpy of reaction was tuned to optimize process economics. The IL was found to have excellent corrosion behavior with and without CO 2 present. In lab-scale tests, the IL was able to effectively remove CO 2 from a simulated flue gas stream, although mass transfer was slower than with aqueous monoethanolamine (MEA) due to higher viscosities. The non-volatile nature of the solvent and its high thermal stability, however, make it an intriguing option. An independent systems analysis indicates that the economics of using the best IL discovered to date (NDIL0157), are at least comparable to and potentially slightly better than - the Fluor Econamine FG PlusTM process (DOE Case 12). Further work should be directed at improving mass transfer / lowering viscosity and developing commercial synthesis routes to make these ILs at scale in an inexpensive manner. Demonstration of the process at larger scales is also warranted, as is the exploration of other process configurations that leverage the anhydrous nature of the solvent and its extremely low volatility.

54 ENVIRONMENTAL SCIENCES↗

Ion Exchange Distribution Coefficient Tests and Computer Modeling at High Ionic Strength Supporting Technetium Removal Resin Maturation

The primary treatment of the tank waste at the DOE Hanford site will be done in the Waste Treatment and Immobilization Plant (WTP) that is currently under construction. The baseline plan for this facility is to treat the waste, splitting it into High Level Waste (HLW) and Low Activity Waste (LAW). Both waste streams are then separately vitrified as glass and poured into canisters for disposition. The LAW glass will be disposed onsite in the Integrated Disposal Facility (IDF). There are currently no plans to treat the waste to remove technetium, so its disposition path is the LAW glass. Due to the water solubility properties of pertechnetate and long half-life of 99 Tc, effective management of 99 Tc is important to the overall success of the Hanford River Protection Project mission. To achieve the full target WTP throughput, additional LAW immobilization capacity is needed, and options are being explored to immobilize the supplemental LAW portion of the tank waste. Removal of 99 Tc, followed by off-site disposal, would eliminate a key risk contributor for the IDF Performance Assessment (PA) for supplemental waste forms, and has potential to reduce treatment and disposal costs. Washington River Protection Solutions (WRPS) is developing some conceptual flow sheets for supplemental LAW treatment and disposal that could benefit from technetium removal. One of these flowsheets will specifically examine removing 99 Tc from the LAW feed stream to supplemental immobilization. To enable an informed decision regarding the viability of technetium removal, further maturation of available technologies is being performed. This report contains results of experimental ion exchange distribution coefficient testing and computer modeling using the resin SuperLig ® 639 a to selectively remove perrhenate from high ionic strength simulated LAW. It is advantageous to operate at higher concentration in order to treat the waste stream without dilution and to minimize the volume of the final wasteform. This work examined the impact of high ionic strength, high density, and high viscosity if higher concentration LAW feed solution is used. Perrhenate (ReO 4 - ) has been shown to be a good nonradioactive surrogate for pertechnetate in laboratory testing for this ion exchange resin, and the performance bias is well established. Equilibrium contact testing with 7.8 M [Na + ] average simulant concentrations indicated that the SuperLig ® 639 resin average perrhenate distribution coefficient was 368 mL/g at a 100:1 phase ratio. Although this indicates good performance at high ionic strength, an equilibrium test cannot examine the impact of liquid viscosity, which impacts the diffusivity of ions and therefore the loading kinetics. To get an understanding of the effect of diffusivity, modeling was performed, which will be followed up with column tests in the future.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

SISGR: Physical Chemistry of Reaction Dynamics in Ionic Liquids

Room temperature ionic liquids (RTILs) are liquids made up of atomic and molecular ions. This is in contrast with more common liquids, such as water, that are made up of neutral molecules. The additional charges on the atoms and molecules can alter the properties of these liquids, for example they tend to have a very high vapor pressure and the ability to shield charge in electronic devices. For these and other reasons RTILs have recently been deployed in a number of applications that involve production of free electrons in the liquid, such as batteries, capacitors, nuclear power plants, and solar cells. Electrons tend to be very reactive, and understanding their behaviour in these liquids is important for the future design of ionic liquids to be employed in these environments. This study investigated the behavior of electrons generated in RTILs by pulses of ultraviolet light, including how long they survive, and how reactive they are with the both the surrounding liquid and impurities in the liquid. The ionic liquid studied was one of the most commonly used, called N-alkyl-N-methyl-pyrrolidinium bistriflimide. What the study revealed was that the majority of the electrons initially created, about 96%, had a very short lifetime of less than one picosecond (10-12 second) due to a process called geminate recombination. The study also demonstrated that the electrons are very reactive at the moment they are detached from the molecules in the liquid by light, but that they relax very quickly and lose almost all of their reactivity in much less than one picosecond. The short lifetime and rapid loss of reactivity both serve as important mechanisms that protect the liquid from radiolytic damage.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗