SEARCH · Search NASA

Results for “matrix diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Effects of temperature and dose rate on ion-irradiated γ-LiAlO 2 pellets

Defect accumulation and microstructural evolution during ion irradiation at elevated temperatures are governed by competing processes of defect production, driven by the dose rate, and defect recovery, controlled by diffusion, interaction, and annihilation. Here, this study investigates the effects of irradiation temperature and the dose rate on microstructural evolution, deuterium retention, and lithium volatilization in γ-LiAlO 2 pellets subjected to sequential He + and D + ion irradiation. Experiments were performed to a total fluence of 3 × 10 17 (He + + D + )/cm 2 at 623, 673, 723, and 773 K with an average He + dose rate of 7.7 × 10 −4 dpa/s, and to 2 × 10 17 (He + + D + )/cm 2 at 773 K with dose rates of 6.8 × 10 −5 , 2.9 × 10 −4 , and 7.3 × 10 −4 dpa/s. At 623 K, the microstructure was dominated by cavities and fractures with no observable precipitate formation, while small precipitates emerged at 673 K. Increasing the irradiation temperature to 723–773 K promoted the formation of larger, faceted LiAl 5 O 8 precipitates, and surface amorphization, accompanied by pronounced lithium depletion and H–D isotopic exchange. At 773 K, medium and high dose rates produced an amorphized surface layer over a crystalline subsurface containing LiAl 5 O 8 precipitates and blisters at the crystalline–amorphous interface, whereas low-dose-rate irradiation preserved surface crystallinity with cavities distributed in the matrix, around precipitates, and along grain boundaries. Precipitate morphology was anisotropic with limited size dependence on the dose rate. These results elucidate the coupled effects of temperature and the dose rate and demonstrate that sequential He + and D 2 + irradiation at 773 K reproduces key microstructural features and H isotope behavior observed in neutron-irradiated γ-LiAlO 2 at 573 K.

dose rate effects↗

DOE OSTI2026

Block encoding of the three-dimensional heterogeneous Poisson equation with application to fracture flow

Quantum linear system (QLS) algorithms offer the potential to solve large-scale linear systems exponentially faster than classical methods. However, applying QLS algorithms to real-world problems remains challenging due to issues such as state preparation, data loading, and efficient information extraction. In this work, we study the feasibility of applying QLS algorithms to solve discretized three-dimensional (3D) heterogeneous Poisson equations, with specific examples relating to groundwater flow through geologic fracture networks. We explicitly construct a block encoding for the 3D heterogeneous Poisson matrix by leveraging the sparse local structure of the discretized operator. While classical solvers benefit from preconditioning, we show that block encoding the system matrix and preconditioner separately does not improve the effective condition number that dominates the QLS run-time. This differs from classical approaches where the preconditioner and the system matrix can often be implemented independently. Nevertheless, due to the structure of the problem in three dimensions, the quantum algorithm achieves a run-time of 𝑂⁡(𝑁 2/3 polylog 𝑁 ⋅log (1/𝜖)), outperforming the best classical methods (with run times of 𝑂⁡(𝑁⁢log 𝑁 ⋅log (1/𝜖))) and offering exponential memory savings. These results highlight both the promise and limitations of QLS algorithms for practical scientific computing, and point to effective condition-number reduction as a key barrier in achieving quantum advantages.

58 GEOSCIENCES↗

DOE OSTI2016

Effective Exploration of New 760°C-Capability Steels for Coal Energy

Cost effective and high performance alloys that are capable of operating at 760 °C or higher for extended periods of time under a very aggressive environment are critically required for the design and development of advanced ultrasupercritical (AUSC) boilers and steam turbines. Finely dispersed Laves phase precipitates have been shown by Takeyama and co-workers to be a viable strengthening mechanism in high temperature austenitic steels. There is currently no straightforward theory that can predict what other intermetallic phases can serve as potent precipitation-strengthening phases for steels; thus we employed a highly effective dual-anneal diffusion multiple (DADM) approach to screen for viable strengthening precipitates over a wide range of compositions. From the Fe-Co-Cr-Ni-Mo DADMs, the Fe-Cr-Mo based Chi phase was identified as a new strengthening phase for high temperature ferritic steels; and from the Fe-Mn-Cr-Nb-Ni-Mo-FeAl DADMs, the Laves phase was identified as a viable strengthening precipitate in Fe-Mn and Fe-Ni based austenitic steels. After identification of viable strengthening phases from the DADMs that covered compositions in the basic ternary and quaternary systems, we employed computation thermodynamics to perform multicomponent alloy design and optimization. For the new the Chi-phase strengthened steels, we performed thermodynamic calculations to vary the volume fraction of the Chi phase and introduced Nb and carbon to promote the formation of stable carbides for grain size control during solution heat treatment. For the Fe-Ni-Mn based austenitic steels, we performed extensive parametric optimization of compositions in order to reduce the expensive Ni content, add Cr and Al for oxidation resistance, and balance the alloying contents (Ni, Mn, Cr, Al, Mo) to suppress the ferritic phase and promote the austenitic matrix phase. Four steels (two ferritic + two austenitic) were designed and tested. The two Chi-phase strengthened ferritic steels exhibited excellent oxidation resistance and good creep-rupture strength at moderate temperatures, considering their ferritic matrix that usually results in lower creep resistance than austenitic steels. These steels showed brittleness and sample-to-sample variability in ductility. The low ductility might be due to the macro segregation during solidification or the significant grain growth during the solution heat treatments. We believe there is no inherent brittleness based on the chemistry of the steels. The creep-rupture performance of the steels is comparable to the 9Cr steels. Due to their ferritic matrix, the new Chi-phase strengthened ferritic steels may not be suited for the 760 °C AUSC applications, but they are very good candidates for intermediate temperature applications due to their outstanding oxidation resistance and high strength. Further study is required to find the source of low and highly variable ductility. We believe the compositions of the Chi-phase strengthened steels are not inherently brittle. The Chi-phase strengthened ferritic steels may also be excellent candidates for intermediate-temperature and room-temperature cast stainless steels, thus we highly recommend further investigations. The two Mn-containing austenitic steels based on the Laves phase showed good ductility, excellent oxidation resistance (slightly inferior to the two ferritic steels) at high temperatures and moderate creep strength. The creep-strength of the two austenitic steels based on the Larson-Miller parameters is higher than that of the traditional 316 stainless steels, but lower than the alumina-forming alloys (AFAs) developed at Oak Ridge National Laboratories. We do not recommend high priority in further studying these compositions unless higher Cr alloys are required for hot-corrosion resistance.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2019

Investigation of Accessible Pore Structure Evolution under Pressurization and Adsorption for Coal and Shale Using Small-Angle Neutron Scattering

Pore structure is an important parameter to quantify the reservoir rock adsorption capability and diffusivity, both of which are fundamental reservoir properties to evaluate the gas production and carbon sequestration potential for coalbed methane (CBM) and shale gas reservoirs. In this study, we applied small-angle neutron scattering (SANS) to characterize the total and accessible pore structures for two coal and two shale samples. We carried out in situ SANS measurements to probe the accessible pore structure differences under argon, deuterated methane (CD 4 ), and CO 2 penetrations. The results show that the total porosity ranges between 0.25 and 5.8% for the four samples. Less than 50% of the total pores are accessible to CD 4 for the two coals, while more than 75% of the pores were found to be accessible for the two shales. This result suggests that organic matter pores tend to be disconnected compared to mineral matter pores. Argon pressurization can induce pore contraction because of the mechanical compression of the solid skeleton in both the coal and shale samples. Hydrostatic compression has a higher effect on the nanopores of coal and shale with a higher accessible porosity. Both methane and CO 2 injection can reduce the accessible nanopore volume due to a combination of mechanical compression, sorption-induced matrix swelling, and adsorbed molecule occupation. CO 2 has higher effects on sorption-induced matrix swelling and pore filling compared to methane for both the coal and shale samples. Gas densification and pore filling could occur at higher pressures and smaller pore sizes. In conclusion, the compression and adsorption could create nanopores in the San Juan coal and Marcellus shale drilled core but could have an opposite effect in the other samples, namely, the processes could damage the nanopores in the Hazleton coal and Marcellus shale outcrop.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2014

Structural characterization of ion-vapor deposited hydrogenated amorphous carbon coatings by solid state {sup 13}C nuclear magnetic resonance

In the present study, unique structural heterogeneity was observed in ion-vapor deposited a-C:H coatings by performing {sup 13}C MAS and {sup 1}H-{sup 13}C CPMAS experiments on solid state nuclear magnetic resonance devices. Two distinct types of sp{sup 2} C clusters were discovered: one of them denoted as sp{sup 2} C′ in content of 3–12 at. % was non-protonated specifically localized in hydrogen-absent regions, while the other dominant one denoted as sp{sup 2} C″ was hydrogenated or at least proximate to proton spins. On basis of the notably analogous variation of sp{sup 2} C′ content and Raman parameters as function of substrate bias voltage in the whole range of 0.5 kV–3.5 kV, a model of nano-clustering configuration was proposed that the sp{sup 2} C′ clusters were embedded between sp{sup 2} C″ clusters and amorphous sp{sup 3} C matrix as trapped interfaces or boundaries where the sp{sup 2} carbon bonds were highly distorted. Continuous increase of bias voltage would promote the nano-clustering and re-ordering of dominant sp{sup 2} C″ clusters, thus results in a marked decrease of interspace and a change of the content of sp{sup 2} C′ clusters. Further investigation on the {sup 13}C magnetization recovery showed typical stretched-exponential approximation due to the prominent presence of paramagnetic centers, and the stretched power α varied within 0.6–0.9 from distinct types of sp{sup 2} C clusters. Differently, the magnetization recovery of {sup 1}H showed better bi-exponential approximation with long and short T{sub 1}(H) fluctuated within 40–60 ms and 0.1–0.3 ms approximately in content of 80% ± 5% and 20% ± 5%, respectively, varying with various bias voltages. Meanwhile, the interrupted {sup 13}C saturation recovery with an interval of short T{sub 1}(H) showed that most of quick-relaxing protons were localized in sp{sup 2} C″ clusters. Such a short T{sub 1}(H) was only possibly resulted from a relaxation mechanism associated with electron-nuclear dipolar interaction or spinning diffusion, and its partial distribution in sp{sup 2} C″ clusters may imply more complex configurations of unpaired electrons in studied a-C:H coatings.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2018

The Effect of γ Irradiation on Phase Transitions in the Polyimide–YBa{sub 2}Cu{sub 3}O{sub 6+} {sub x} System

The effect of γ irradiation on optical properties of films of the polyimide–YBa{sub 2}Cu{sub 3}O{sub 6.7} system with different concentrations of the filler in the form of the finely crystalline compound YBa{sub 2}Cu{sub 3}O{sub 6.7} (0.05 wt %, 0.10 wt %, and 0.50 wt %) has been investigated. The properties were studied on an IKS-29 infrared spectrophotometer in a spectral range of 400–4200 cm{sup –1} at room temperature. The samples were irradiated in air under room conditions on an RKhM-γ-20 by doses of 150, 250, and 600 kGy. The power of the exposure dose of the {sup 60}Co source was 0.16 rad/s. It has been established that irradiation with a dose of up to 600 kGy of the abovementioned system slightly affects the structure of the polyimide matrix but decreases the number of free radical groups in the film structure with the formation of hydrogen bonds. In the range of 400–4200 cm{sup –1} at D = 150 kGy, the most intense changes in spectra of polymeric composite samples have been revealed. In the range of 2850–3350 cm{sup –1}, the wide absorption spectrum band is preserved, which is caused by the presence of Cu, Y, and Ba crystallohydrates. The band is related to deformation vibrations of the Cu–O bond in YBa{sub 2}- Cu{sub 3}O{sub 6.7} (YBCO) chains due to properties of barium carbonate, formation of oxygen vacancies in the filler, and vibrations of the Cu(I)–O(I) bonds near one or several O(4) vacancies. Irradiation by doses of 250 and 600 kGy for different concentrations of the filler leads to a decrease in the signal intensity in the range of 1800–3600 cm{sup –1} by 20–35% on average. Peaks related to interband transitions (transitions of the Cu(I)–Cu(IY)–Cu(II) system) and bending vibrations O(I)–Cu(I) are not changed by strains of O(IY)–Cu(I) bonds. This testifies to the radiation-stimulated diffusion of oxygen atoms to O(IY) sites determining the orthorhombic phase of YBa{sub 2}Cu{sub 3}O{sub 6.7} from the occupied positions in the Cu–O sublattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Geochemical-hydromechanical couplings during water-serpentinized harzburgite interactions at 20° C and 30 bars

Interaction of groundwater with the serpentinized harzburgites of the upper mantle plays an important role in the geologic carbon cycle and serpentinization processes. Here, in this study, an intact serpentinized harzburgite with more than 60% lizardite from the Semail ophiolite in Oman was reacted with water at near neutral pH and low PCO 2 to observe its dissolution behavior and reaction path within the CaO-MgO-SiO 2 -CO 2 -H 2 O system at 20 °C and 30 bars. In the experiment, mass (i.e. H 2 O, ions) transfer is by diffusion and the selected temperature and pressure conditions mimic water-rock interactions at the shallow portions of most ultramafic rock hosted aquifers. Equilibrium activity-activity diagrams and thermodynamic data were used to compare the experimentally determined reaction path with the theoretical stability boundaries for minerals involved to investigate the evolution of bulk chemical composition, mineralogy, and water composition. The experiments demonstrated that (i) the water-rock interactions increased the pH of the aqueous phase from 5.9 to 7.5 over a period of 18 weeks; (ii) the dissolution of lizardite, orthopyroxene (enstatite), and clinopyroxene (diopside and augite) increased the concentration of Mg, Ca, and Si in the aqueous phase; (iii) the dissolution was incongruent with respect to Mg and Si, favoring Si release at pH > 6 due to (a) breaking of more reactive cation‑oxygen bonds that is consistent with the stoichiometry of magnesium for proton exchange reaction which favors a surface that is enriched in Mg at basic conditions, and (b) preferential dissolution of clinopyroxene Mg 1.30 Ca 0.52 Fe 0.06 Si 2 O 6 ; (iv) the aqueous phase was undersaturated with respect to carbonate (e.g. calcite, magnesite, and hydromagnesite) and hydrous (e.g. lizardite, chrysotile, brucite, and talc) minerals; (v) the bulk chemical composition and mineralogy of the intact serpentinized harzburgite matrix did not change; (vi) the thermodynamic data can successfully predict water-intact serpentinized harzburgite behavior if the water chemical composition can be constrained; and (vii) no detectable macroscopic form of damage (e.g. microcracks forming as a result of differential stress fields due to changes in volume during chemical reaction) was observed.

Carbonation↗

DOE OSTI2016

Expression and localization of heterogeneous nuclear ribonucleoprotein K in mouse ovaries and preimplantation embryos

Heterogeneous nuclear ribonucleoprotein K (hnRNP K), an evolutionarily conserved protein, is involved in several important cellular processes that are relevant to cell proliferation, differentiation, apoptosis, and cancer development. However, details of hnRNP K expression during mammalian oogenesis and preimplantation embryo development are lacking. The present study investigates the expression and cellular localization of K protein in the mouse ovaries and preimplantation embryos using immunostaining. We demonstrate, for the first time, that hnRNP K is abundantly expressed in the nuclei of mouse oocytes in primordial, primary and secondary follicles. In germ vesicle (GV)-stage oocytes, hnRNP K accumulates in the germinal vesicle in a spot distribution manner. After germinal vesicle breakdown, speckled hnRNP K is diffusely distributed in the cytoplasm. However, after fertilization, the K protein relocates into the female and male pronucleus and persists in the blastomere nuclei. Localization of K protein in the human ovary and ovarian granulosa cell tumor (GCT) was also investigated. Overall, this study provides important morphological evidence to better understand the possible roles of hnRNP K in mammalian oogenesis and early embryo development. - Highlights: • HnRNP K localizes in the nucleus of GV-stage oocyte in a punctate distribution. • HnRNP K strongly accumulates in zygotic pronuclei as condensed spots. • The localization of hnRNP K during oogenesis and embryogenesis is characteristic. • HnRNP K might have an important role in oogenesis and embryonic development.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2020

An Investigation of Liquefaction in Irradiated TRIGA Fuel Exposed to Relatively High Temperatures

This report presents the findings of an investigation into high temperature fuel cladding chemical interactions (FCCI) in Training, Research, Isotopes, General Atomics (TRIGA) fuel rods. A TRIGA fuel-rod core or meat is principally composed of uranium (U) particles dispersed in a zirconium hydride (Zr H) matrix. The fuel is clad in sealed 304SS or Incoloy 800 tubes. At high temperatures, the fuel will interact with the cladding, resulting in FCCI. To investigate the FCCI (in this case, liquefaction), irradiated TRIGA fuel rods were exposed to relatively high temperatures in furnace tests. The tests were performed at different temperatures using segments from an irradiated TRIGA fuel rod at the Hot Fuel Examination Facility located at Idaho National Laboratory (INL). The data from this study is important for developing a better understanding of the performance of U-ZrH fuel type during transient events (e.g., a Loss of Coolant Accident (LOCA) event) that may result in high temperatures while operating a TRIGA reactor. Furnace tests were run for 6 hours at 730, 800, 900, 950, and 1,000°C. One test was run for 12 hours at 950°C. Post-test microstructural characterization was performed on the heat-treated samples using optical metallography to look for evidence of liquefaction. Additionally, microstructural characterization was performed using scanning electron microscopy to investigate the microstructure of the as-irradiated fuel before heat treatment and the microstructural changes that occurred after heat treating for the 730 and 950°C heat treatments for 6 hours. Results of the analysis were compared to those produced during diffusion studies performed using unirradiated TRIGA fuel meat and type 304 stainless steel. A gap is typically present in as-irradiated fuel that limits any possibility for chemical interaction between the fuel and cladding. Optical metallography (OM) was used to identify areas in the specimens heat treated at 950 and 1000°C where fuel and cladding contact was satisfactory for the FCCI to transpire. The bulk of the interaction zones that form due to FCCI developed in the fuel meat and not as much in the cladding. Even in the sample tested at 1,000°C, no evidence was found that gross fuel meat or cladding melting had occurred. Only limited porosity was found in the fuel meat that possibly could have been due to melting of a particular precipitate phase or phases that had formed during FCCI. These results agreed with those reported for the unirradiated diffusion couple studies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2022

Fundamental Investigations into the Properties and Performance of Advanced Materials

Intelligent engineering designs require an accurate understanding of material behavior, since any uncertainties or gaps in knowledge must be counterbalanced with heightened factors of safety, leading to overdesign. Therefore, building better structures and pushing the performance of new components requires an improved understanding of the thermomechanical response of advanced materials under service conditions. This dissertation provides fundamental investigations of several advanced materials: thermoset polymers, a common matrix material for fiber-reinforced composites and nanocomposites; aluminum alloy 7075-T6 (AA7075-T6), a high-performance aerospace material; and ceramic matrix composites (CMCs), an advanced composite for extreme-temperature applications. To understand matrix interactions with various interfaces and nanoinclusions at their fundamental scale, the properties of thermoset polymers are studied at the atomistic scale. An improved proximity-based molecular dynamics (MD) technique for modeling the crosslinking of thermoset polymers is carefully established, enabling realistic curing simulations through its ability to dynamically and probabilistically perform complex topology transformations. The proximity-based MD curing methodology is then used to explore damage initiation and the local anisotropic evolution of mechanical properties in thermoset polymers under uniaxial tension with an emphasis on changes in stiffness through a series of tensile loading, unloading, and reloading experiments. Aluminum alloys in aerospace applications often require a fatigue life of over 109 cycles, which is well over ii the number of cycles that can be practically tested using conventional fatigue testing equipment. In order to study these high-life regimes, a detailed ultrasonic cycle fatigue study is presented for AA7075-T6 under fully reversed tension-compression loading. The geometric sensitivity, frequency effects, size effects, surface roughness effects, and the corresponding failure mechanisms for ultrasonic fatigue across different fatigue regimes are investigated. Finally, because CMCs are utilized in extreme environments, oxidation plays an important role in their degradation. A multiphysics modeling methodology is thus developed to address the complex coupling between oxidation, mechanical stress, and oxygen diffusion in heterogeneous carbon fiber-reinforced CMC microstructures.

Schichtel, Jacob J.↗

DOE OSTI2020

Investigation of the discontinuous precipitation of U-Nb alloys via thermodynamic analysis and phase-field modeling

U-Nb’s discontinuous precipitation, $\gamma^{bcc}_{matrix}$, $\alpha^{orth}_{cellular}$, $\gamma\prime^{bcc}_{cellular}$, is intriguing in the sense that it allows formation and growth of the metastable $\gamma\prime$ phase during the course of its occurrence. Previous attempts to explain the thermodynamic origin of U-Nb’s discontinuous precipitation hypothesized that the energy of $\alpha$ forms an intermediate common tangent with the first potential of the double-well energy of $\gamma$ at the $\gamma\prime$ composition. In this work, we examine different possible mechanisms by which the discontinuous precipitation product in the U-Nb system can be stabilized. We put forward a mechanism by which the bulk free energy of the $\gamma$ can develop a non-monotonic dependency with composition. Additionally we posit that local contributions due to lattice mismatch between the $\alpha$ and $\gamma$ phases may be responsible for the generation of metastable states that may stabilized by thermodynamics as well as by kinetics. Our work suggests that local misfit strain tends to play a crucial role in the growth of the discontinuous precipitation product. Depending on the magnitude of strain developed at the $\alpha$/$\gamma\prime$ interfaces, either an increasing $\gamma\prime$ composition or a random distribution of $\gamma\prime$ compositions around the equiatomic value with respect to increasing temperature could be expected. Moreover, we show how it is possible to stabilize the discontinuous precipitation front through highly anisotropic and fast interface diffusion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2018

Helium induced microstructure damage, nano-scale grain formation and helium retention behaviour of ZrC

Transition-metal ultra-high temperature ceramics are promising materials for nuclear structural applications. However, an understanding of their response to high-temperature irradiation and helium is vastly limited. This paper presents a study of helium effects in zirconium carbide (ZrC) by performing room temperature 3 MeV 3 He + ion irradiations up to 5 × 10 20 ions m –2 (~1.8 at.% at peak) and high-temperature annealing (1273–1873 K), coupled with state-of-art characterization using transmission electron microscopy (TEM), scanning electron microscopy (SEM) and nuclear reaction analysis (NRA). We reveal that ZrC is susceptible to irradiation damage in terms of helium bubble formation. After annealing at 1373 K, tiny bubbles (1–2 nm) formed aligned clusters which were highly over-pressurized, producing strain contrast in TEM. At 1773 K, significant bubble growth occurred. Additionally, at 1773 K, a combined TEM/SEM analysis revealed dramatic matrix damage due to helium-induced surface blistering. Underneath blister caps, the microstructure evolved into ultra-fine nano-scale grains similar to high burn-up structures observed in nuclear fuels, but consisting of numerous nano-cracks. We hypothesize that such structures are formed due to high gas pressure build-up and its subsequent release. This phenomenon initiated at the grain boundaries. Blister top surface consisted of inter-granular and trans-granular cracks. NRA depth profiling revealed that helium was present as double peaks with major portion lying at the end-of-the-range (EOR) and the rest as TEM invisible clusters in a shoulder extending to the surface. ZrC started releasing helium after 1373 K. As a result, helium release increased significantly at higher temperatures, with majority helium loss occurring from EOR rather than from near-surface regions.

36 MATERIALS SCIENCE↗

DOE OSTI2017

Rebamipide ameliorates radiation-induced intestinal injury in a mouse model

Radiation-induced enteritis is a major side effect in cancer patients undergoing abdominopelvic radiotherapy. Radiation exposure produces an uncontrolled inflammatory cascade and epithelial cell loss leading to impaired epithelial barrier function. The goal of this study was to determine the effect of rebamipide on regeneration of the intestinal epithelia after radiation injury. The abdomens of C57BL/6 mice were exposed to 13 Gy of irradiation (IR) and then the mice were treated with rebamipide. Upon IR, intestinal epithelia were destroyed structurally at the microscopic level and bacterial translocation was increased. The intestinal damage reached a maximum level on day 6 post-IR and intestinal regeneration occurred thereafter. We found that rebamipide significantly ameliorated radiation-induced intestinal injury. In mice treated with rebamipide after IR, intestinal barrier function recovered and expression of the tight junction components of the intestinal barrier were upregulated. Rebamipide administration reduced radiation-induced intestinal mucosal injury. The levels of proinflammatory cytokines and matrix metallopeptidase 9 (MMP9) were significantly reduced upon rebamipide administration. Intestinal cell proliferation and β-catenin expression also increased upon rebamipide administration. These data demonstrate that rebamipide reverses impairment of the intestinal barrier by increasing intestinal cell proliferation and attenuating the inflammatory response by inhibiting MMP9 and proinflammatory cytokine expression in a murine model of radiation-induced enteritis. - Highlights: • The first study on the therapeutic effects of rebamipide in radiation injury. • Irradiation destructed microscopic structures and intestinal barrier. • Rebamipide recovered intestinal barrier function and tight junction components. • Rebamipide reduced the levels of pro-inflammatory cytokines and MMP 9. • Intestinal cell proliferation and β-catenin expression increased by rebamipide.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2022

Return of the templates: Revisiting the Galactic Center excess with multimessenger observations

The Galactic center excess (GCE) remains one of the most intriguing discoveries from the Fermi Large Area Telescope (LAT) observations. We revisit the characteristics of the GCE by first producing a new set of high-resolution galactic diffuse gamma-ray emission templates. This diffuse emission, which accounts for the bulk of the observed gamma rays, is ultimately due to cosmic-ray interactions with the interstellar medium. Using recent high-precision cosmic-ray observations, in addition to the continuing Fermi-LAT observations and observations from lower energy photons, we constrain the properties of the galactic diffuse emission. We describe a large set of diffuse gamma-ray emission templates which account for a very wide range of initial assumptions on the physical conditions in the inner galaxy. The broad properties of the GCE that we find in this work are qualitatively unchanged despite the introduction of this new set of templates, though its quantitative features appear mildly different than those obtained in previous analyses. In particular, we find a high-energy tail at higher significance than previously reported. This tail is very prominent in the northern hemisphere, and less so in the southern hemisphere. This strongly affects one prominent interpretation of the excess: known millisecond pulsars are incapable of producing this high-energy emission, even in the relatively softer southern hemisphere, and are therefore disfavored as the sole explanation of the GCE. The annihilation of dark matter particles of mass 40 - 7 + 10 GeV (95% CL) to b quarks with a cross-section of ⟨ σ A v ⟩ = 1. 4 - 0.3 + 0.6 × 10 - 26 cm 3 s − 1 provides a good fit to the excess especially in the relatively cleaner southern sky. Dark matter of the same mass range annihilating to b quarks or heavier dark matter particles annihilating to heavier Standard Model bosons can combine with millisecond pulsars to provide a good fit to the southern hemisphere emission as well, as can a broken power-law spectrum which would be related to recent cosmic-ray burst activity. As part of this paper, we make publicly available all of our templates and the data covariance matrix we have generated to account for systematic uncertainties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2021

Distribution of Bound and Free Water in Anatomical Fractions of Pine Residues and Corn Stover as a Function of Biological Degradation

Biomass quality is influenced by water’s abundance, distribution, and status in relation to other chemical species within the polymer matrix. Water interacts with polymers that make up the cell walls, and these interactions govern the physical and chemical changes that occur during the storage and preprocessing of biomass feedstocks. Time-domain nuclear magnetic resonance (TD-NMR) was employed to explore variations in the physical constraints of water within the lignocellulosic microstructure in distinct anatomical fractions of biomass and as a function of biological degradation. The Carr–Purcell–Meiboom–Gill sequence, when combined with knowledge of the chemical composition and physical structure of pine residues and corn stover anatomical fractions, gives an accurate measurement of the bound and free water. In this work, the impacts of storage and biological degradation were investigated to elucidate changes in the status and distribution of water within distinct plant tissues. We also investigate how degradation during storage affects water interactions in different pine residues (e.g., bark, branch, and needle) and corn stover (e.g., cob, leaf, and stalk) anatomical fractions using transverse relaxation times (T2). As demonstrated herein, TD-NMR provides quantitative data on lignocellulosic biomass–water interactions within anatomical fractions, which can further aid in the investigation of preprocessing effects on feedstock quality. Our findings suggest that biological heating enhances biomass–water interactions at the cellular and macromolecular scale. In addition, analysis of three-dimensional scanning electron microscopy reconstructions indicates that surface roughness wavelengths align with microscale roughness, suggesting that pine forestry residue and corn stover particles have primarily hydrophobic exterior surfaces. Furthermore, this study offers multiscale insights into understanding the microstructure, wettability, and chemical environment that dictate diffusion, enzyme access, and recalcitrance of lignocellulosic biomass.

09 BIOMASS FUELS↗

DOE OSTI2025

Phase Field Modeling of Chemical Reaction Related Damage Evolution in Environmental Barrier Coatings

The advent of next-generation engines necessitates materials capable of withstanding temperatures beyond the reach of current superalloys. SiC-based ceramic matrix composites, augmented with environmental barrier coatings (EBCs), present a promising materials solution. Given the active search for effective and durable EBCs, there is a pressing need for modeling tools to understand and predict damage evolution in these materials to help accelerate their development. This study introduces a phase-field model (PFM) designed to simulate the thermally grown oxides (TGO) and phase transformation in the degradation and failure of EBCs. The model accounts for the severe volume expansion due to oxidation, alongside phase transformations and porosity evolution during thermal cycling, offering a comprehensive view of the damage processes. Simulation results are validated against experimental findings reported in the literature, establishing the model's potential as a significant tool for understanding and improving the resilience of EBCs in cyclic oxidative environments.

fast-diffusion path↗

DOE OSTI2017

Improvement of small to large grain A15 ratio in Nb 3 Sn PIT wires by inverted multistage heat treatments

The next generation of superconducting accelerator magnets for the Large Hadron Collider at CERN will require large amounts of Nb 3 Sn superconducting wires and the Powder-In-Tube (PIT) process, which utilizes a NbSn 2 -rich powder core within tubes of Nb(7.5wt%Ta) contained in a stabilizing Cu matrix, is a potential candidate. But, the critical current density, J c , is limited by the formation of a large grain (LG) A15 layer which does not contribute to transport current, but occupies 25-30% of the total A15 area. Thus it is important to understand how this layer forms, and if it can be minimized in favor of the beneficial small grain (SG) A15 morphology which carries the supercurrent. The ratio of SG/LG A15 is our metric here, where an increase signals improvement in the wires A15 morphology distribution. We have made a critical new observation that the initiation of the LG A15 formation can be controlled at a wide range of temperatures relative to the formation of the small grain (SG) A15. The LG A15 can be uniquely identified as a decomposition product of the Nb6Sn5(Cu x ), surrounded by a layer of rejected Cu, thus the LG A15 is not only of low pin density, but is not continuous grain to grain. We have found that in single stage reactions limited to 630 °C - 690 °C, the maximum SG A15 layer thickness prior to LG A15 formation is very sensitive to temperature, with a maximum around 670 °C. This result led to the design of four novel heat treatments which all included a short, high temperature stage early in the reaction, followed by a slow cooling to a more typical reaction temperature of 630 °C. We also found that this heat treatment (HT) modification increased the SG A15 layer thickness while simultaneously suppressing LG A15 morphology, with no additional consumption of the diffusion barrier. In the best heat treatment the SG/LG A15 ratio improved by 30%. Unfortunately, J c values suffered slightly, however further exploration of this high temperature reaction region is required to understand the limits to A15 formation in Nb3Sn PIT conductors.

36 MATERIALS SCIENCE↗

DOE OSTI2014

Experimental studies on the formation of D{sub 2}O and D{sub 2}O{sub 2} by implantation of energetic D{sup +} ions into oxygen ices

The formation of water (H{sub 2}O) in the interstellar medium is intrinsically linked to grain-surface chemistry; thought to involve reactions between atomic (or molecular) hydrogen with atomic oxygen (O), molecular oxygen (O{sub 2}), and ozone (O{sub 3}). Laboratory precedent suggests that H{sub 2}O is produced efficiently when O{sub 2} ices are exposed to H atoms (∼100 K). This leads to the sequential generation of the hydroxyperoxyl radical (HO{sub 2}), then hydrogen peroxide (H{sub 2}O{sub 2}), and finally H{sub 2}O and a hydroxyl radical (OH); despite a barrier of ∼2300 K for the last step. Recent detection of the four involved species toward ρ Oph A supports this general scenario; however, the precise formation mechanism remains undetermined. Here, solid O{sub 2} ice held at 12 K is exposed to a monoenergetic beam of 5 keV D{sup +} ions. Products formed during the irradiation period are monitored through FTIR spectroscopy. O{sub 3} is observed through seven archetypal absorptions. Three additional bands found at 2583, 2707, and 1195 cm {sup –1} correspond to matrix isolated DO{sub 2} (ν{sub 1}) and D{sub 2}O{sub 2} (ν{sub 1}, ν{sub 5}), and D{sub 2}O (ν{sub 2}), respectively. During subsequent warming, the O{sub 2} ice sublimates, revealing a broad band at 2472 cm{sup –1} characteristic of amorphous D{sub 2}O (ν{sub 1}, ν{sub 3}). Sublimating D{sub 2}, D{sub 2}O, D{sub 2}O{sub 2}, and O{sub 3} products were confirmed through their subsequent detection via quadrupole mass spectrometry. Reaction schemes based on both thermally accessible and suprathermally induced chemistries were developed to fit the observed temporal profiles are used to elucidate possible reaction pathways for the formation of D{sub 2}-water. Several alternative schemes to the hydrogenation pathway (O{sub 2}→HO{sub 2}→H{sub 2}O{sub 2}→H{sub 2}O) were identified; their astrophysical implications are briefly discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗