Search NASA⌕ Search

SEARCH · Search NASA

Results for “preparation methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Comparative study of microstructure and properties of low-alloy-steel/nickel-based-alloy interfaces in dissimilar metal weld joints prepared by different GTAW methods

Highlights: • Number of type I and type II boundaries: H-DMWJ > C-DMWJ > W-DMWJ. • Width carbon depleted zones and carbon enriched zones: H-DMWJ > C-DMWJ > W-DMWJ. • Type I and type II boundaries are susceptible to SCC and cracked during mechanical bending. • C-DMWJ has the best performance while H-DMWJ has the worst one. - Abstract: Low-alloy-steel/buttering (or welding) metal interfaces in safe-end dissimilar metal weld joints (DMWJs) at nuclear power plants are weak parts. To optimize the quality of the safe-end DMWJs used for the construction of domestic nuclear power plants and to improve the welding productivity, a series of DMWJs in full-size have been manufactured by using different gas tungsten arc welding (GTAW) methods. The microstructure, chemical composition distribution and local properties across the SA508/52(M) interfaces in these DMWJs are studied. The high heat input and long high temperature duration during hot-wire GTAW process promote the carbon diffusion and grain boundary migration and hence the DMWJ by hot-wire GTAW has the largest amount of type I and type II boundaries and the widest carbon depleted zones and carbon enriched zones, which resulting in the worst performance among the DMWJs in simulated primary water. Type I and type II boundaries are high angle random grain boundaries (RGBs) and Cr-depleted zones are found along type II boundaries resulting in their high susceptibility to SCC. In addition, these boundaries are prone to be cracked during mechanical bending process.

36 MATERIALS SCIENCE↗

In-situ fabrication of graded material with the application of a horizontal magnetic field during directional solidification

Highlights: • The horizontal magnetic field caused the migration of primary grains and the formation of graded material. • TEMF play a major effect on the formation of graded material. • The magnitude of TEMF increases with the increase of magnetic field intensity. • This work initiates a new method to prepare the “graded material” via an applied horizontal magnetic field. - Abstract: The present paper proposes a method of graded materials preparation under a low horizontal magnetic field during directional solidification. The external horizontal magnetic field was applied to the mushy zone of the directionally solidified Al-10 wt% Cu and Al-18 wt% Si samples, which was perpendicular to the growth direction. Experimental results demonstrate that the applied horizontal magnetic field produces a gradient size distribution of the primary α(Al) grains in Al-10 wt% Cu alloys and a gradient fraction distribution of primary Si particles in Al-18 wt% Si alloys. 3D numerical simulations indicate that the formation of graded structure should be attributed to the migration of primary phase driven by the thermoelectric magnetic force (TEMF). The formation of segregation channel should be attributed to the TEM convection (TEMC) in the mushy zone. Further, in situ synchrotron X-ray radiography observations of the initial transient of directional solidification show that the primary α(Al) phases were migrated approximately along the direction perpendicular to the magnetic field. These results suggest that the TEM effects can greatly change the growth of primary grains and the solidification structure, and the application of an external horizontal magnetic field would be beneficial to fabricate the graded material during directional solidification.

36 MATERIALS SCIENCE↗

Preparation of bismuth oxyiodides and oxides and their photooxidation characteristic under visible/UV light irradiation

Bismuth oxyiodides and oxides were prepared by a solution combination with thermal treatment method. The prepared samples were characterized by X-ray diffraction, thermogravimetry, scanning electron microscopy, transmission electron microscopy, and UV-vis diffuse reflectance spectra, and Brunauer-Emmett-Teller surface areas. The photooxidation activity of the samples was evaluated by photocatalytic decolorization of acid orange II under both visible light ({lambda} > 420 nm) and UV light ({lambda} = 365 nm) irradiation. Results show that a series of changes in the compounds take place during the course of calcination, described as: BiOI {yields} Bi{sub 5}O{sub 7}I {yields} {alpha}-Bi{sub 2}O{sub 3}. Under visible light irradiation, the photocatalytic activities follow the order: BiOI > Bi{sub 5}O{sub 7}I > Bi{sub 5}O{sub 7}I/Bi{sub 2}O{sub 3} mixture > Bi{sub 2}O{sub 3}, which is mainly attributed to the different absorption ability to visible light due to the different band gap energy; the activities are in the order: BiOI < Bi{sub 2}O{sub 3} < Bi{sub 5}O{sub 7}I/Bi{sub 2}O{sub 3} mixture < Bi{sub 5}O{sub 7}I under UV light irradiation, which is mainly caused by the different oxidability.

36 MATERIALS SCIENCE↗

Nucleation and crystallization behaviors of nano-crystalline lithium–mica glass–ceramic prepared via sol–gel method

Graphical abstract: The effects of nucleation and crystallization treatments on nano-crystalline lithium–mica glass–ceramic, synthesized by sol–gel technique, were investigated. It was found that MgF{sub 2} crystals act as nuclei centers for the mica crystallization so that a large quantity of mica crystallites was obtained following nucleation process. The crystallization activation energy for both the un-nucleated and nucleated samples was measured as 400.2 and 229.6 kJ mol{sup −1}, respectively. The calculated Avrami exponents demonstrated that the growth mechanism of mica crystallites changes from the needle-like to three-dimensional growth with applying the appropriate nucleation treatment ▪. Highlights: ► Crystallization temperature shifts to 625 from 680 °C following nucleation process. ► Activation energy of crystallization for the nucleated specimen is 229.6 kJ mol{sup −1}. ► Crystallization activation energy for the un-nucleated specimen is 400.2 kJ mol{sup −1}. ► Needle-like growth is predominant growth mechanism for un-nucleated sample. ► Three-dimensional growth is predominant growth mechanism for nucleated sample. -- Abstract: The paper investigates the effects of nucleation and crystallization treatments on nano-crystalline lithium–mica glass–ceramics, taking the composition LiMg{sub 3}AlSi{sub 3(1+x)}O{sub 10+6x}F{sub 2} (x = 0.5) and 8 mass% MgF{sub 2} synthesized by sol–gel technique. Here, X-ray diffraction, thermal analysis and transmission electron microscopy were used to assess the structural evolutions of as-synthesized nano-crystalline lithium–mica glass–ceramics. It was found that MgF{sub 2} crystals perform as nuclei centers for the mica crystallization hence; a large quantity of mica crystallites obtained following the nucleation process at 400 °C for 12 h. For both the un-nucleated and nucleated samples, the crystallization activation energy was measured as 400.2 and 229.6 kJ mol{sup −1}, respectively. Consequently, the calculated Avrami exponents demonstrated that the growth mechanism of mica crystallites, while applying appropriate nucleation treatment, changes from needle-like to three-dimensional growth.

36 MATERIALS SCIENCE↗

Electrochemical properties of magnesium doped LiFePO{sub 4} cathode material prepared by sol–gel method

Magnesium doped Li{sub 1−2x}Mg{sub x}FePO{sub 4}/C (x = 0.00, 0.01, 0.03, 0.05) cathode materials were synthesized by sol–gel method, and the effect of magnesium doping as well as its content on the electrochemical properties for lithium batteries was also investigated{sub .} Their morphology was studied with field emission scanning electron microscope and Li{sub 1−2x}Mg{sub x}FePO{sub 4} materials showed the olivine phase without impurities. The thin carbon layer of Li{sub 1−2x}Mg{sub x}FePO{sub 4}/C was confirmed by high resolution transmission electron microscopy. The magnesium doped Li{sub 1−2x}Mg{sub x}FePO{sub 4}/C particles were smaller than those undoped. The Li{sub 1−2x}Mg{sub x}FePO{sub 4}/C materials showed better cycling behavior than undoped LiFePO{sub 4}, especially at high C-rate in which Li{sub 0.94}Mg{sub 0.03}FePO{sub 4}/C composition exhibited the best electrochemical properties.

36 MATERIALS SCIENCE↗

Co{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} (0 ≤ x ≤ 1) nanocrystalline solid solution prepared by the polyol method: Characterization and magnetic properties

Highlights: ► Co–Zn ferrite nanoparticles were produced by soft chemistry. ► Cation distribution deviation from the thermodynamically stable one was evidenced. ► The magnetic characteristics were affected and differ from those of bulks. -- Abstract: Highly crystalline stoichiometric Co{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} (0 ≤ x ≤ 1) nanoparticles were successfully synthesized by the polyol process. X-ray diffraction (XRD), X-ray fluorescence spectroscopy (XRF), transmission electron microscopy (TEM), infrared spectroscopy (IR), zero-field {sup 57}Fe Mössbauer spectrometry and magnetic measurements using a SQUID magnetometer were employed to investigate the effect of the substitution of Zn{sup 2+} ions for Co{sup 2+} ones on the structure, and the magnetic properties of the cobalt ferrite, CoFe{sub 2}O{sub 4}. The unit cell parameter almost increases linearly with increasing Zn concentration, x, following Vegard's law. The red and blue shifts observed for the metal-oxygen ν{sub 1} and ν{sub 2}IR vibration bands, respectively, were consistent with the preferential entrance of Zn{sup 2+} ions in tetrahedral sites. Besides, detailed magnetic investigation in correlation with the cation distribution has been reported. All the particles exhibit superparamagnetic behaviour at room temperature. In addition, the magnetic characteristics (blocking temperature, saturation magnetization, coercivity, Curie temperature) clearly depend on the chemical composition and cation distribution. Both the blocking temperature and Curie temperature decrease drastically with Zn composition, x, increase. Further, the saturation magnetization follows an almost bulk-like behaviour with values notably larger than that of the bulk, mainly attributed to cation distribution deviation.

36 MATERIALS SCIENCE↗

Photoredox degradation of different water pollutants (MO, RhB, MB, and Cr(VI)) using Fe–N–S-tri-doped TiO{sub 2} nanophotocatalyst prepared by novel chemical method

Highlights: • TiO{sub 2} was synthesized through simple one-step hydrothermal method. • Photocatalytic activity for degradation of organic dyes and Cr(VI) are investigated. • The synergistic effect is shown in coexistence of MB and Cr(VI). - Abstract: Fe–N–S-tri-doped TiO{sub 2} (FeNS-TiO{sub 2}) was synthesized by a simple one-step hydrothermal method. The as-synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS). The photocatalytic activities of as-synthesized samples were tested by the oxidation of methyl orange (MO), rhodamine B (RhB), methylene blue (MB) and the reduction of aqueous Cr(VI) under visible-light (λ > 420 nm) irradiation, and compared with N-dope P25 (N-P25) and the undoped TiO{sub 2}. Besides, the effects of the coexistence of MO, RhB, and MB on FeNS-TiO{sub 2}-mediated photocatalytic reduction of aqueous Cr(VI) were also studied. The results indicated FeNS-TiO{sub 2} displayed higher visible-light-activated photocatalytic activity than N-P25 and the undoped TiO{sub 2}. Otherwise, FeNS-TiO{sub 2} showed the coexistence of MB enhanced the photocatalytic reduction of Cr(VI), whereas the coexistence of MO and RhB retarded the photocatalytic reduction of Cr(VI) over FeNS-TiO{sub 2}. Moreover, a possible photocatalytic mechanism is discussed.

36 MATERIALS SCIENCE↗

Structural and magnetic characteristics of PVA/CoFe{sub 2}O{sub 4} nano-composites prepared via mechanical alloying method

Highlights: • Single phase CoFe{sub 2}O{sub 4} nano-particles synthesized in one step by mechanical alloying. • PVA/CoFe{sub 2}O{sub 4} magnetic nano-composites were fabricated via mechanical milling. • FTIR confirmed the interaction between PVA and magnetic CoFe{sub 2}O{sub 4} particles. • Increasing in milling time and PVA amount led to well dispersion of CoFe{sub 2}O{sub 4}. - Abstract: In this research, polyvinyl alcohol/cobalt ferrite nano-composites were successfully synthesized employing a two-step procedure: the spherical single-phase cobalt ferrite of 20 ± 4 nm mean particle size was synthesized via mechanical alloying method and then embedded into polymer matrix by intensive milling. The results revealed that increase in polyvinyl alcohol content and milling time causes cobalt ferrite particles disperse more homogeneously in polymer matrix, while the mean particle size and shape of cobalt ferrite have not been significantly affected. Transmission electron microscope images indicated that polyvinyl alcohol chains have surrounded the cobalt ferrite nano-particles; also, the interaction between polymer and cobalt ferrite particles in nano-composite samples was confirmed. Magnetic properties evaluation showed that saturation magnetization, coercivity and anisotropy constant values decreased in nano-composite samples compared to pure cobalt ferrite. However, the coercivity values of related nano-composite samples enhanced by increasing PVA amount due to domain wall mechanism.

36 MATERIALS SCIENCE↗

Extraction Chromatographic Methods in the Sample Preparation Sequence for Thermal Ionization Mass Spectrometric Analysis of Plutonium Isotopes

A sample preparation sequence for actinide isotopic analysis by TIMS is described that includes column-based extraction chromatography as the first separation step, followed by anion exchange column separations. The sequence is designed to include a wet ashing step after the extraction chromatography to prevent any leached extractant or oxalic acid eluent reagents from interfering with subsequent separations, source preparation, or TIMS ionization. TEVA-resin and DGA-resin materials, containing extractants that consist only of C, N, O, and H atoms, were investigated for isolation of plutonium. Radiotracer level studies confirmed expected high yields from column-based separation procedures. Femtogram-level studies were carried out with TIMS detection, using multiple isotopic spikes through the separation sequence. Pu recoveries were 87% and 86% for TEVA- and DGA-resins separations respectively. The Pu recoveries from 400 {mu}L anion-exchange column separations were 89% and 93% for trial sequences incorporating TEVA and DGA-resin. Thus, a prior extraction chromatography step in the sequence did not interfere with the subsequent anion exchange separation when a simple wet ash step was carried out in between these column separations. The average measurement efficiency, for Pu, encompassing the chemical separation recoveries and the TIMS ionization efficiency, was 2.73 {+-} 0.77% (2-sigma) for the DGA-resin trials and 2.67 {+-} 0.54% for the TEVA-resin trials, compared to 3.41% and 2.37% (average 2.89%) for two spikes in the experimental set. These compare with an average measurement efficiency of 2.78 {+-} 1.70%, n = 33 from process benchmark analyses using Pu spikes processed through a sequence of oxalate precipitation, wet ash, iron hydroxide precipitation, and anion exchange column separations. We conclude that extraction chromatography can be a viable separation procedure as part of a multistep sequence for TIMS sample preparation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physical Properties of Potassium Phosphate Glass Prepared by Sol Gel Method

Series of glasses based on Al{sub 2}O{sub 3}-K{sub 2}O-P{sub 2}O{sub 5} have successfully been made by sol gel method. The amorphous state has been confirmed by X-ray diffraction (XRD) while the actual composition has been determined using Energy Dispersive X-ray (EDX) analysis. The glass density is determined using Archimedes method while the Vickers Micro hardness Test has been used to measure the hardness. It is found that all the samples are amorphous in nature with their actual composition contained phosphate in the range of 40-53% mol. It is also observed that the glass density is about 2.4 gcm{sup -3} while the hardness is in the range of 40-100 Hv, depending on composition.

36 MATERIALS SCIENCE↗

Excitation Power Dependence Of Photoluminescence From GaAs Quantum Dot Prepared By Droplet Epitaxy Method

GaAs quantum dot (QD) was grown by droplet epitaxy (DE) method and the excitation power dependence of photoluminescence (PL) were carried out. To investigate the effect of annealing temperature on QDs optical properties, the two step RTA process was carried out in a various temperature range from 800 to 1000 deg. C. As the thermal annealing temperature increases, the PL peak position is blue-shifted due to the change of the composition and size distribution of QDs, and the highest PL intensity is observed at the sample annealed at 900 deg. C. The integrated PL intensity (I{sub PL}) is plotted against the excitation density in a log-log scale and the slope was calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Blue emission of Eu{sup 2+} doped LaMgAl{sub 11}O{sub 19} phosphor prepared by combustion synthesis method

Blue-emitting phosphor LaMgAl{sub 11}O{sub 19}:Eu{sup 2+} has been synthesized successfully at 500 °C by one step combustion synthesis method. The as-synthesized materials were characterized by powder x-ray diffraction (XRD) and photoluminescence (PL) techniques. Upon 365 nm excitation, emission spectra of the LaMgAl{sub 11}O{sub 19}:Eu{sup 2+} phosphors show a blue band at 450 nm. The excitation spectra corresponding to 4f{sup 7}-4f{sup 6}5d transition of Eu{sup 2+} cover the spectral range of 280–430 nm. The concentration quenching of Eu{sup 2+} in the LaMgAl{sub 11}O{sub 19} host was determined to be 3 mol%. The CIE chromaticity of LAM: Eu{sup 2+} phosphors was compared with the commercial BAM.

36 MATERIALS SCIENCE↗

Method and system for preparing polycrystalline group III metal nitride

A process of preparing polycrystalline group III nitride chunks comprising the steps of (a) placing a group III metal inside a source chamber; (b) flowing a halogen-containing gas over the group III metal to form a group III metal halide; (c) contacting the group III metal halide with a nitrogen-containing gas in a deposition chamber containing a foil, the foil comprising at least one of Mo, W, Ta, Pd, Pt, Ir, or Re; (d) forming a polycrystalline group III nitride layer on the foil within the deposition chamber; (e) removing the polycrystalline group III nitride layer from the foil; and (f) comminuting the polycrystalline group III nitride layer to form the polycrystalline group III nitride chunks, wherein the removing and the comminuting are performed in any order or simultaneously.

36 MATERIALS SCIENCE↗