Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantum dot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Efficient photon extraction from a quantum dot in a broad-band planar cavity antenna

We analyse the extraction of photons emitted from single InAs quantum dots embedded in planar microcavities. The structures are designed to achieve broad-band operation and high-collection efficiency from a device requiring straightforward fabrication, even with electrical contacts. The designs consist of a quantum dot in a GaAs membrane with asymmetric top and bottom mirrors and a top-side solid immersion lens (SIL). Four separate cases are considered in our design: a GaAs membrane only (case 1), GaAs membrane with a glass SIL on top (case 2), a GaAs membrane with a glass SIL on top and a back mirror consisting of Au (case 3), a GaAs membrane with a glass SIL on top of a distribute Bragg reflector mirror and Au back mirror (case 4). Both finite difference time domain and analytical simulations are used to calculate the electric field, power density, and far-field radiation pattern. For optimized structures (case 4), we obtain significant extraction efficiencies (>50%) with modest Purcell enhancements (∼20%) and a large spectral full-width-half-maximum (>100 nm). The high-extraction efficiency, broad-band operation, and facile fabrication make the proposed structures promising for realistic quantum dot devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum dot conjugates in a sub-micrometer fluidic channel

A nanofluidic channel fabricated in fused silica with an approximately 500 nm square cross section was used to isolate, detect and identify individual quantum dot conjugates. The channel enables the rapid detection of every fluorescent entity in solution. A laser of selected wavelength was used to excite multiple species of quantum dots and organic molecules, and the emission spectra were resolved without significant signal rejection. Quantum dots were then conjugated with organic molecules and detected to demonstrate efficient multicolor detection. PCH was used to analyze coincident detection and to characterize the degree of binding. The use of a small fluidic channel to detect quantum dots as fluorescent labels was shown to be an efficient technique for multiplexed single molecule studies. Detection of single molecule binding events has a variety of applications including high throughput immunoassays.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum dot conjugates in a sub-micrometer fluidic channel

A nanofluidic channel fabricated in fused silica with an approximately 500 nm square cross section was used to isolate, detect and identify individual quantum dot conjugates. The channel enables the rapid detection of every fluorescent entity in solution. A laser of selected wavelength was used to excite multiple species of quantum dots and organic molecules, and the emission spectra were resolved without significant signal rejection. Quantum dots were then conjugated with organic molecules and detected to demonstrate efficient multicolor detection. PCH was used to analyze coincident detection and to characterize the degree of binding. The use of a small fluidic channel to detect quantum dots as fluorescent labels was shown to be an efficient technique for multiplexed single molecule studies. Detection of single molecule binding events has a variety of applications including high throughput immunoassays.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Non-polar InGaN quantum dot emission with crystal-axis oriented linear polarization

Polarization sensitive photoluminescence is performed on single non-polar InGaN quantum dots. The studied InGaN quantum dots are found to have linearly polarized emission with a common polarization direction defined by the [0001] crystal axis. Around half of ∼40 studied dots have a polarization degree of 1. For those lines with a polarization degree less than 1, we can resolve fine structure splittings between −800 μeV and +800 μeV, with no clear correlation between fine structure splitting and emission energy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Recent progress in synthetic methods and applications in solar cells of Ag2S quantum dots

Highlights: • Ag{sub 2}S QD is a good photovoltaic material suit for fabricating QDSSCs. • Solvothermal method, precursor thermal decomposition method are two suitable proccesses for synthesizing Ag{sub 2}S QDs. • The higher PCE will be realized for Ag{sub 2}S QDSSCs through ameliorating structures of solar cell. - Abstract: Ag{sub 2}S quantum dot is a semiconductor with narrow band-gap, high chemical stability, broad light absorption, photovoltaic effect and photoluminescence, which makes it a good photovoltaic material for fabricating solar cells. Many works have been conducted to demonstrate the synthesis of Ag{sub 2}S nanostructure, as well as their applications in solar cells. In this article, the recent development of methods for synthesizing Ag{sub 2}S quantum dots and Ag{sub 2}S-based solar cells is reviewed. Especially metal oxide/Ag{sub 2}S-based solar cells, Ag{sub 2}S quantum dots, dye co-sensitized solar cells and inorganic-organic hybrid solar cells have been detailed. Ag{sub 2}S quantum dots, with broad light absorption band and extensive absorption coefficient, have shown large potential in fabricating quantum dot-sensitized solar cells as well as polymer solar cells.

14 SOLAR ENERGY↗

Process-Dependent Properties in Colloidally Synthesized “Giant” Core/Shell Nanocrystal Quantum Dots

Due to their characteristic bright and stable photoluminescence, semiconductor nanocrystal quantum dots (NQDs) have attracted much interest as efficient light emitters for applications from single-particle tracking to solid-state lighting. Despite their numerous enabling traits, however, NQD optical properties are frustratingly sensitive to their chemical environment, exhibit fluorescence intermittency ('blinking'), and are susceptible to Auger recombination, an efficient nonradiative decay process. Previously, we showed for the first time that colloidal CdSe/CdS core/shell nanocrystal quantum dots (NQDs) comprising ultrathick shells (number of shell monolayers, n, > 10) grown by protracted successive ionic layer adsorption and reaction (SILAR) leads to remarkable photostability and significantly suppressed blinking behavior as a function of increasing shell thickness. We have also shown that these so-called 'giant' NQDs (g-NQDs) afford nearly complete suppression of non-radiative Auger recombination, revealed in our studies as long biexciton lifetimes and efficient multiexciton emission. The unique behavior of this core/shell system prompted us to assess correlations between specific physicochemical properties - beyond shell thickness - and functionality. Here, we demonstrate the ability of particle shape/faceting, crystalline phase, and core size to determine ensemble and single-particle optical properties (quantum yield/brightness, blinking, radiative lifetimes). Significantly, we show how reaction process parameters (surface-stabilizing ligands, ligand:NQD ratio, choice of 'inert' solvent, and modifications to the SILAR method itself) can be tuned to modify these function-dictating NQD physical properties, ultimately leading to an optimized synthetic approach that results in the complete suppression of blinking. We find that the resulting 'guiding principles' can be applied to other NQD compositions, allowing us to achieve non-blinking behavior in the near-infrared. Lastly, in addition to realizing novel light-emission properties by refining nanoscale architectures at the single-NQD level, we also investigate collective properties by assembling our core/shell NQDs into larger scale arrays.

36 MATERIALS SCIENCE↗

Theory of photovoltaic characteristics of semiconductor quantum dot solar cells

We develop a comprehensive rate equations model for semiconductor quantum dot solar cells (QDSCs). The model is based on the continuity equations with a proper account for quantum dots (QDs). A general analytical expression for the total current density is obtained, and the current-voltage characteristic is studied for several specific situations. The degradation in the open circuit voltage of the QDSC is shown to be due to strong spontaneous radiative recombination in QDs. Due to small absorption coefficient of the QD ensemble, the improvement in the short circuit current density is negligible if only one QD layer is used. If spontaneous radiative recombination would be suppressed in QDs, a QDSC with multiple QD layers would have significantly higher short circuit current density and power conversion efficiency than its conventional counterpart. The effects of photoexcitation of carriers from discrete-energy states in QDs to continuum-energy states are discussed. An extended model, which includes excited states in QDs, is also introduced.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Decision making based on optical excitation transfer via near-field interactions between quantum dots

Optical near-field interactions between nanostructured matters, such as quantum dots, result in unidirectional optical excitation transfer when energy dissipation is induced. This results in versatile spatiotemporal dynamics of the optical excitation, which can be controlled by engineering the dissipation processes and exploited to realize intelligent capabilities such as solution searching and decision making. Here, we experimentally demonstrate the ability to solve a decision making problem on the basis of optical excitation transfer via near-field interactions by using colloidal quantum dots of different sizes, formed on a geometry-controlled substrate. We characterize the energy transfer behavior due to multiple control light patterns and experimentally demonstrate the ability to solve the multi-armed bandit problem. Our work makes a decisive step towards the practical design of nanophotonic systems capable of efficient decision making, one of the most important intellectual attributes of the human brain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Facile synthesis and photoluminescence mechanism of graphene quantum dots

We report a facile hydrothermal synthesis of intrinsic fluorescent graphene quantum dots (GQDs) with two-dimensional morphology. This synthesis uses glucose, concentrate sulfuric acid, and deionized water as reagents. Concentrated sulfuric acid is found to play a key role in controlling the transformation of as-prepared hydrothermal products from amorphous carbon nanodots to well-crystallized GQDs. These GQDs show typical absorption characteristic for graphene, and have nearly excitation-independent ultraviolet and blue intrinsic emissions. Temperature-dependent PL measurements have demonstrated strong electron-electron scattering and electron-phonon interactions, suggesting a similar temperature behavior of GQDs to inorganic semiconductor quantum dots. According to optical studies, the ultraviolet emission is found to originate from the recombination of electron-hole pairs localized in the C=C bonds, while the blue emission is from the electron transition of sp{sup 2} domains.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Far off-resonant coupling between photonic crystal microcavity and single quantum dot with resonant excitation

In this paper, we experimentally demonstrate that with sub-nanowatt coherent s-shell excitation of a single InAs quantum dot, off-resonant coupling of 4.1 nm is possible between L3 photonic crystal microcavity and the quantum dot at 50 K. This resonant excitation reduces strongly the effect of surrounding charges to quantum dot, multiexciton complexes and pure dephasing. It seems that this far off-resonant coupling is the result of increased number of acoustical phonons due to high operating temperature of 50 K. The 4.1 nm detuning is the largest amount for this kind of coupling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of InAs quantum dots capped with GaAs on atomic-scale ordering in Ga 0.5 In 0.5 P

The CuPt ordering of the group III elements in Ga x In 1-x P ( x ≃ 0.5) has been observed to vary during growth by metalorganic vapor-phase epitaxy of InAs quantum dots capped with GaAs in a GaInP matrix. While ordering is not affected by the insertion of a GaAs layer, the growth of InAs quantum dots capped with GaAs results in ordered, partially ordered, or fully disordered GaInP. We show that the degree of ordering depends on the deposition time of the InAs quantum dots and on the thickness of the GaAs capping layer. Our results indicate that disordered GaInP occurs in the presence of excess indium at the growth surface, which results from the growth of strained InAs quantum dots. Ordering resumes when the excess indium is consumed. Cathodoluminescence, scanning transmission electron microscopy, and atomic force microscopy are used in this study to correlate the electronic properties and the microstructure of the thin films.

Atomic force microscopy↗

Toward Robust Autotuning of Noisy Quantum dot Devices

The current autotuning approaches for quantum dot (QD) devices, while showing some success, lack an assessment of data reliability. This leads to unexpected failures when noisy or otherwise low-quality data is processed by an autonomous system. In this work, we propose a framework for robust autotuning of QD devices that combines a machine learning (ML) state classifier with a data quality control module. The data quality control module acts as a “gatekeeper” system, ensuring that only reliable data are processed by the state classifier. Lower data quality results in either device recalibration or termination. To train both ML systems, we enhance the QD simulation by incorporating synthetic noise typical of QD experiments. We confirm that the inclusion of synthetic noise in the training of the state classifier significantly improves the performance, resulting in an accuracy of 95.0(9)% when tested on experimental data. We then validate the functionality of the data quality control module by showing that the state classifier performance deteriorates with decreasing data quality, as expected. Our results establish a robust and flexible ML framework for autonomous tuning of noisy QD devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unraveling Exciton Trap Dynamics and Nonradiative Loss Pathways in Quantum Dots via Atomistic Simulations

Surface defects in colloidal quantum dots are a major source of nonradiative losses, yet the microscopic mechanisms underlying exciton trapping and recombination remain elusive. Here, we develop a model Hamiltonian based on atomistic electronic calculations to investigate exciton dynamics in CdSe/CdS core/shell QDs containing a single hole trap introduced by an unpassivated sulfur atom. By systematically varying the defect depth and reorganization energy, we uncover how defect-induced excitonic states mediate energy relaxation pathways. Our simulations reveal that a single localized defect can induce a rich spectrum of excitonic states, leading to multiple dynamical regimes, from slow, energetically off-resonant trapping to fast, cascaded relaxation through in-gap defect states. Crucially, we quantify how defect-induced polaron shifts and exciton-phonon couplings govern the balance between efficient radiative emission and rapid nonradiative decay. These insights clarify the microscopic origin of defect-assisted loss channels and suggest pathways for tailoring QD optoelectronic properties via surface and defect engineering.

Defects↗

Plasmonic effect on quantum coherence and interference in metallic photonic crystals doped with quantum dots

We have studied the effect of plasma energy on the absorption coefficient of metallic photonic crystals doped with an ensemble of three-level quantum dots, which are interacting with each other via dipole-dipole interaction. The quantum dots are also interacting with coupled plasma-photon modes present in the system. A probe laser field is applied in order to study the absorption coefficient. We also consider the effect of quantum interference in our simulations, whereby two absorbed photons interfere with one another. Here the density matrix method has been used to calculate the steady-state and transient behavior of the absorption coefficient for the system. Two different field configurations are considered in our numerical simulations. In the first configuration, a probe field couples the ground state and two closely excited states. Absorption occurs due to transitions from the ground state to the two excited states. It is found that the position of the transparent peak moves when the plasma energy is changed. In other words, changing the plasma energy causes the system to switch between a transparent and an absorbing state. The strong coupling between plasmons and the quantum dots is responsible for this phenomenon. In the second configuration, the probe field couples with only one excited state, while a pump field couples to the other excited state. The transition between excited states is dipole forbidden. We observed that the peak in the absorption profile splits into two and also that the system exhibits gain with inversion due to the change in the plasma frequency, which is caused by quantum interference and coherence. These are interesting results and can be used make nanoscale plasma devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Device response principles and the impact on energy resolution of epitaxial quantum dot scintillators with monolithic photodetector integration

Abstract Epitaxial quantum dot (QD) scintillator crystals with picosecond-scale timing and high light yield have been created for medical imaging, high energy physics and national security applications. Monolithic photodetector (PD) integration enables the sensing of photons generated within the waveguiding crystal and allows a wide range of scintillator-photodetector coupling geometries. Until recently, these doubly novel devices have suffered from complex, high variance responses to monoenergetic sources which significantly reduces their precision and accuracy. The principles governing the overall device response have now been discerned and embodied by an expression derived within a geometrical optics framework which considers optical properties, surface roughness and photodetector coupling geometry. Response variation due to these factors was sufficiently reduced to obtain material-related energy resolution values of 2.4% with alpha particles. These findings place energy resolution alongside luminescence timescale, photon yield, and radiation hardness as outstanding properties of these engineered materials.

36 MATERIALS SCIENCE↗

Memristive operation mode of a site-controlled quantum dot floating gate transistor

We have realized a floating gate transistor based on a GaAs/AlGaAs heterostructure with site-controlled InAs quantum dots. By short-circuiting the source contact with the lateral gates and performing closed voltage sweep cycles, we observe a memristive operation mode with pinched hysteresis loops and two clearly distinguishable conductive states. The conductance depends on the quantum dot charge which can be altered in a controllable manner by the voltage value and time interval spent in the charging region. The quantum dot memristor has the potential to realize artificial synapses in a state-of-the-art opto-electronic semiconductor platform by charge localization and Coulomb coupling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Valley splitting of single-electron Si MOS quantum dots

Here, silicon-based metal-oxide-semiconductor quantum dots are prominent candidates for high-fidelity, manufacturable qubits. Due to silicon's band structure, additional low-energy states persist in these devices, presenting both challenges and opportunities. Although the physics governing these valley states has been the subject of intense study, quantitative agreement between experiment and theory remains elusive. Here, we present data from an experiment probing the valley states of quantum dot devices and develop a theory that is in quantitative agreement with both this and a recently reported experiment. Through sampling millions of realistic cases of interface roughness, our method provides evidence that the valley physics between the two samples is essentially the same.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Temperature characteristics of epitaxially grown InAs quantum dot micro-disk lasers on silicon for on-chip light sources

Temperature characteristics of optically pumped micro-disk lasers (MDLs) incorporating InAs quantum dot active regions are investigated for on-chip light sources. The InAs quantum dot MDLs were grown on V-groove patterned (001) silicon, fully compatible with the prevailing complementary metal oxide-semiconductor technology. By combining the high-quality whispering gallery modes and 3D confinement of injected carriers in quantum dot micro-disk structures, we achieved lasing operation from 10 K up to room temperature under continuous optical pumping. Temperature dependences of the threshold, lasing wavelength, slope efficiency, and mode linewidth are examined. An excellent characteristic temperature T{sub o} of 105 K has been extracted.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗