Search NASA⌕ Search

SEARCH · Search NASA

Results for “rough surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Electrochemical Polishing Applications and EIS of a Vitamin B{sub 4}-Based Ionic Liquid

Modern particle accelerators require minimal interior surface roughness for Niobium superconducting radio frequency (SRF) cavities. Polishing of the Nb is currently achieved via electrochemical polishing with concentrated mixtures of sulfuric and hydrofluoric acids. This acid-based approach is effective at reducing the surface roughness to acceptable levels for SRF use, but due to acid-related hazards and extra costs (including safe disposal of used polishing solutions), an acid-free method would be preferable. This study focuses on an alternative electrochemical polishing method for Nb, using a novel ionic liquid solution containing choline chloride, also known as Vitamin B{sub 4} (VB{sub 4}). Potentiostatic electrochemical impedance spectroscopy (EIS) was also performed on the VB4-based system. Nb polished using the VB4-based method was found to have a final surface roughness comparable to that achieved via the acid-based method, as assessed by atomic force microscopy (AFM). These findings indicate that acid-free VB{sub 4}-based electrochemical polishing of Nb represents a promising replacement for acid-based methods of SRF cavity preparation.

36 MATERIALS SCIENCE↗

Generation of graphite particles by sliding abrasion and their characterization

Characterization of graphite particles (dust) produced by abrasion that would occur in a pebble bed reactor is of interest for reasons of safety, operation, and maintenance. To better understand this abrasion and particle generation, we have built a test apparatus to produce particles by sliding abrasion in a 1% to 5% relative humidity air environment. We have used a commercial-grade graphite in our experiments and have generated size distributions for the abraded particles. We have also fit lognormal functions to those size distributions (for use in computer codes); determined particle shapes; measured temperature and humidity during the tests; measured and calculated wear rates; and measured the surface roughness of both pretest and posttest samples, particle surface areas, pore volumes, and pore volume distributions of particles produced during abrasion of graphite surfaces under different loadings and sliding speeds. The experiments showed that as loading (analogous to pebble depth in the reactor) and sliding speed increase, so do the wear rates and numbers of particles produced, while surface roughness decreases, increases, and then decreases. Brunauer-Emmett-Teller measurements show that abrasion increases surface area from 0.583 m 2 /g in the bulk material to 555 m 2 /g in material abraded at high loading and high sliding speed. Wear rates range from 0.005 to 0.991 g/m per contact site. As a result, the size of the particles observed was <4000 nm. Finally, in all, our research shows that pebble abrasion is a complex process that is not constant during operation and thus should be considered for future work.

36 MATERIALS SCIENCE↗

Plasma Treatment of Bulk Niobium Surface for SRF Cavities - Optimization of the Experimental Conditions on Flat Samples

Accelerator performance, in particular the average accelerating field and the cavity quality factor, depends on the physical and chemical characteristics of the superconducting radio-frequency (SRF) cavity surface. Plasma based surface modification provides an excellent opportunity to eliminate non-superconductive pollutants in the penetration depth region and to remove mechanically damaged surface layer improving surface roughness. Here we show that plasma treatment of bulk Nb presents surface preparation method alternative to the commonly used BCP and EP methods. We have optimized the experimental conditions in the microwave glow discharge system and their influence on the Nb removal rate on the flat samples. We have achieved etching rates of 1.5 micro-m/min using only 3% Cl2 in the reactive mixture. Combining fast etching step with the moderate one, we have improved a surface roughness without exposing fresh sample surface to the environment. We will apply optimized experimental conditions to single cell cavities, in pursuing improvement of their RF performance.

Raskovic, Marija↗

Study of the grazing-incidence X-ray scattering of strongly disturbed fractal surfaces

The applicability of different approaches to the description of hard X-ray scattering from rough surfaces is generally limited by a maximum surface roughness height of no more than 1 nm. Meanwhile, this value is several times larger for the surfaces of different materials subjected to treatment, especially in the initial treatment stages. To control the roughness parameters in all stages of surface treatment, a new approach has been developed, which is based on a series expansion of wavefield over the plane eigenstate-function waves describing the small-angle scattering of incident X-rays in terms of plane q-waves propagating through the interface between two media with a random function of relief heights. To determine the amplitudes of reflected and transmitted plane q-waves, a system of two linked integral equations was derived. The solutions to these equations correspond (in zero order) to the well-known Fresnel expressions for a smooth plane interface. Based on these solutions, a statistical fractal model of an isotropic rough interface is built in terms of root-mean-square roughness σ, two-point correlation length l, and fractal surface index h. The model is used to interpret X-ray scattering data for polished surfaces of single-crystal cadmium telluride samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoluminescence studies of polycrystalline Cu(In,Ga)Se{sub 2}: Lateral inhomogeneities beyond Abbe's diffraction limit

We analyze Cu(In,Ga)Se{sub 2} absorbers with a scanning near-field optical microscope (SNOM) by photoluminescence (PL). Such measurements allow one to extract local fluctuations of the integral PL yield, the quasi-Fermi level splitting, and the material composition in the submicron range. However, the experimental findings depend strongly on the surface roughness of the absorber: If the surface is rough, artifact-prone correlations between surface contour and PL features measured by SNOM can be found that complicate the study of recombination effects. For smooth surfaces, such correlations no longer exist and the influence of grain boundaries on the integral PL yield and the quasi-Fermi level splitting is revealed. The method also allows a detailed determination of the local band gaps in neighboring grains and their spatial variation inside, and thus of possibly local changes in chemical composition of different grains.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synergistic etch rates during low-energetic plasma etching of hydrogenated amorphous carbon

The etch mechanisms of hydrogenated amorphous carbon thin films in low-energetic (<2 eV) high flux plasmas are investigated with spectroscopic ellipsometry. The results indicate a synergistic effect for the etch rate between argon ions and atomic hydrogen, even at these extremely low kinetic energies. Ion-assisted chemical sputtering is the primary etch mechanism in both Ar/H{sub 2} and pure H{sub 2} plasmas, although a contribution of swift chemical sputtering to the total etch rate is not excluded. Furthermore, ions determine to a large extent the surface morphology during plasma etching. A high influx of ions enhances the etch rate and limits the surface roughness, whereas a low ion flux promotes graphitization and leads to a large surface roughness (up to 60 nm).

36 MATERIALS SCIENCE↗

Separation of vegetation and rock signatures in Thematic Mapper and polarimetric SAR images

A technique for separating classes of surface roughness and vegetation in semiarid regions using polarimetric synthetic aperture radar (SAR) and Thematic Mapper data is developed. Polarimetric SAR data may be used to separate areas with less than 10 percent vegetation cover where one suite of model inversions may be applicable for derivation of surface roughness. In more vegetated regions, visible/near-infrared data provide a mechanism for determining the relative contribution of vegetation to multiple scattering in the SAR data. Thus, the synergistic use of the two data sets provides a more complete characterization of surface units and cover. This result is critical when trying to monitor dielectric constant variations related to changes in moisture content of soil and vegetation cover in arid to semiarid regions. A strategy for automating a procedure for measurement of surface roughness is proposed.

Evans, Diane L.↗

The role of the reflection coefficient in precision measurement of ultrasonic attenuation

Ultrasonic attenuation measurements using contact, pulse-echo techniques are sensitive to surface roughness and couplant thickness variations. This can reduce considerable inaccuracies in the measurement of the attenuation coefficient for broadband pulses. Inaccuracies arise from variations in the reflection coefficient at the buffer-couplant-sample interface. The reflection coefficient is examined as a function of the surface roughness and corresponding couplant thickness variations. Interrelations with ultrasonic frequency are illustrated. Reliable attenuation measurements are obtained only when the frequency dependence of the reflection coefficient is incorporated in signal analysis. Data are given for nickel 200 samples and a silicon nitride ceramic bar having surface roughness variations in the 0.3 to 3.0 microns range for signal bandwidths in the 50 to 100 MHz range.

Generazio, E. R.↗

The role of the reflection coefficient in precision measurement of ultrasonic attenuation

Ultrasonic attenuation measurements using contact, pulse-echo techniques are sensitive to surface roughness and couplant thickness variations. This can reduce considerable inaccuracies in the measurement of the attenuation coefficient for broadband pulses. Inaccuracies arise from variations in the reflection coefficient at the buffer-couplant-sample interface. The reflection coefficient is examined as a function of the surface roughness and corresponding couplant thickness variations. Interrelations with ultrasonic frequency are illustrated. Reliable attenuation measurements are obtained only when the frequency dependence of the reflection coefficient is incorporated in signal analysis. Data are given for nickel 200 samples and a silicon nitride ceramic bar having surface roughness variations in the 0.3 to 3.0 microns range for signal bandwidths in the 50 to 100 MHz range.

Generazio, E. R.↗

Discrete space charge affected field emission: Flat and hemisphere emitters

Models of space-charge affected thermal-field emission from protrusions, able to incorporate the effects of both surface roughness and elongated field emitter structures in beam optics codes, are desirable but difficult. The models proposed here treat the meso-scale diode region separate from the micro-scale regions characteristic of the emission sites. The consequences of discrete emission events are given for both one-dimensional (sheets of charge) and three dimensional (rings of charge) models: in the former, results converge to steady state conditions found by theory (e.g., Rokhlenko et al. [J. Appl. Phys. 107, 014904 (2010)]) but show oscillatory structure as they do. Surface roughness or geometric features are handled using a ring of charge model, from which the image charges are found and used to modify the apex field and emitted current. The roughness model is shown to have additional constraints related to the discrete nature of electron charge. The ability of a unit cell model to treat field emitter structures and incorporate surface roughness effects inside a beam optics code is assessed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improving the Performance of Threaded Joints

Abstract—The influence of the surface roughness on the fatigue strength of threaded joints is considered. Multifactorial experiment design is used to analyze the influence of the geometry in tap sharpening and the thickness of the cut layer on the roughness of the machined surface. A durable new tap design ensures high quality of the machined surface.

42 ENGINEERING↗

Texturing Carbon-carbon Composite Radiator Surfaces Utilizing Atomic Oxygen

Future space nuclear power systems will require radiator technology to dissipate excess heat created by a nuclear reactor. Large radiator fins with circulating coolant are in development for this purpose and an investigation of how to make them most efficient is underway. Maximizing the surface area while minimizing the mass of such radiator fins is critical for obtaining the highest efficiency in dissipating heat. Processes to develop surface roughness are under investigation to maximize the effective surface area of a radiator fin. Surface roughness is created through several methods including oxidation and texturing. The effects of atomic oxygen impingement on carbon-carbon surfaces are currently being investigated for texturing a radiator surface. Early studies of atomic oxygen impingement in low Earth orbit indicate significant texturing due to ram atomic oxygen. The surface morphology of the affected surfaces shows many microscopic cones and valleys which have been experimentally shown to increase radiation emittance. Further study of this morphology proceeded in the Long Duration Exposure Facility (LDEF). Atomic oxygen experiments on the LDEF successfully duplicated the results obtained from materials in spaceflight by subjecting samples to 4.5 eV atomic oxygen from a fixed ram angle. These experiments replicated the conical valley morphology that was seen on samples subjected to low Earth orbit.

Raack, Taylor↗

Analysis of Ku-band cross section at low incidence angles

This study is using airborne Ku-band data to address questions which have implications for both model function development and for advancing our physical understanding of the sea surface. Concurrent measurements of ocean directional spectra, significant wave height, and mean surface roughness are made using the capabilities of the radar ocean wave spectrometer (ROWS). The NASA/GSFC's ROWS is a 15 GHz pulse compressed radar which is a radar sensor designed to measure the direction of the long wave components using spectral analysis of the tilt induced reflectively modulation. The ROWS are modified to cycle at 50 Hz for the scanning spectrometer antenna and a wide beamwidth nadir altimeter mode. This change allows the sensor to simultaneously measure directional wave spectra, wave height, mean square slope parameter, and small scale surface roughness. The surface stress caused by the wind is widely believed to be the predominant quantity related to the Ku-band radar cross section for a wide range of incidence angles. The complete coverage in the quasi specular region provided by one sensor is essential to understand the uncertainties between the scattering model and what is happening on the surface. For this presentation, special attention is devoted to sort out some measurement of the anisotropy associated with the band of high frequencies. Using the other geophysical parameters, comparisons are then made with the classic spectral form currentlyused to describe the wind impact on the sea surface.

Chapron, B.↗

Influence of Effective Physical Contact Area on Microstructure and Mechanical Properties of Diffusion-Bonded TC4/1060Al Joints

In the present study, dissimilar TC4 alloy and 1060Al alloy were successfully diffusion-bonded at a very low temperature about 410 °C by improving the effective physical contact area. A sound joint with a crack-free interface and a high shear strength (128 MPa) is obtained with a combination of TC4 surface roughness of 109.90 μm (S{sub a}) and 1060Al surface roughness of 101.43 μm (S{sub a}), and customized parallel surface scratches. Under this condition, the two parent metals share the largest contact area during the physical contact stage of diffusion bonding process, which is consistent with the theoretical calculation. The results show that no Ti-Al binary intermetallic compounds are observed at the interface of the joints. The maximum shear strength of the joint reaches 128 MPa with optimized bonding parameters (410 °C for 120 min with a pressure of 20 MPa), which is higher than the shear strength of 1060Al (80 MPa) base metal. The fractography analysis indicates the joints failed with a ductile fracture at the 1060Al side.

36 MATERIALS SCIENCE↗

Deterministic multi-zone ice accretion modeling

The focus here is on a deterministic model of the surface roughness transition behavior of glaze ice. The initial smooth/rough transition location, bead formation, and the propagation of the transition location are analyzed. Based on the hypothesis that the smooth/rough transition location coincides with the laminar/turbulent boundary layer transition location, a multizone model is implemented in the LEWICE code. In order to verify the effectiveness of the model, ice accretion predictions for simple cylinders calculated by the multizone LEWICE are compared to experimental ice shapes. The glaze ice shapes are found to be sensitive to the laminar surface roughness and bead thickness parameters controlling the transition location, while the ice shapes are found to be insensitive to the turbulent surface roughness.

Yamaguchi, K.↗

Deterministic multi-zone ice accretion modeling

The study focuses on a deterministic model of the surface roughness transition behavior of glaze ice and analyzes the initial smooth/rough transition location, bead formation, and the propagation of the transition location. Based on a hypothesis that the smooth/rough transition location coincides with the laminar/turbulent boundary-layer transition location, a multizone model is implemented in the LEWICE code. In order to verify the effectiveness of the model, ice accretion predictions for simple cylinders calculated by the multizone LEWICE are compared to experimental ice shapes. The glaze ice shapes are found to be sensitive to the laminar surface roughness and bead thickness parameters controlling the transition location, while the ice shapes are found to be insensitive to the turbulent surface roughness.

Yamaguchi, K.↗

The surface of near-Earth asteroids

The surfaces of near-Earth asteroids are expected to differ significantly from those of large objects like the moon because of their different origin and evolution. A selection of such objects for an extensive procurement of material will also be made on criteria like the surface roughness and the rotation rate with respect to the surface gravity. From the currently known distribution of near-Earth asteroid rotation rates it is shown that a significant fraction of them is rotating near their escape velocities. The determination of macroscopic surface roughness from rotation light curves under an assumption of a fractal surface geometry is discussed. Much information is expected from the variation of harmonic expansions of the light curves with the phase angle.

Hoffmann, Martin↗

Merging flux-variance with surface renewal methods in the roughness sublayer and the atmospheric surface layer

In this article, Two micrometeorological methods utilizing high-frequency sampled air temperature were tested against eddy covariance (EC) sensible heat flux (𝐻) measurements at three sites representing agricultural, agro-forestry, and forestry systems. The two methods cover conventional and newly proposed forms of the flux-variance (FV) and surface renewal (SR) schemes of differing complexities. The sites represent measurements in surface, roughness, and roughness to surface transitional layers. Regression analyzes against EC show that the most reliable FV and SR forms estimate 𝐻 with slopes within ±10% from unity and coefficient of determination 𝑅2 > 0.9 across all the three sites. The best performance of both FV and SR was found at the agricultural site with measurements well within the surface layer, while the worst was found for the tall forest with measurements within the roughness sublayer where its thickness needed to be additionally estimated. The main variable driving 𝐻 in FV is the temperature variance, whereas in SR, it is the geometry of ramp-like structures. Since these structures are also responsible for most of the temperature variance, a novel FV-SR approach emerging from combining the methods is proposed and evaluated against EC measurements and conventional FV and SR schemes. The proposed FV-SR approach requiring only a single fast response thermocouple is potentially independent of calibration and ameliorates some of the theoretical objections that arise when combining ramp statistics with similarity arguments. The combination of methods also provides new insights into the contribution of coherent structures to the temperature variance and its dependence on atmospheric stratification. Other potential utility of the new method is to include it in multi-tool assessments of surface energy fluxes, since a convergence or divergence of the results has a high diagnostic value.

54 ENVIRONMENTAL SCIENCES↗