Search NASA⌕ Search

SEARCH · Search NASA

Results for “semiconductor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Temperature dependence of the threshold current density and external differential quantum efficiency of semiconductor lasers ({lambda} = 900-920 nm)

The temperature dependences of the emission characteristics of semiconductor lasers based on asymmetric separate-confinement heterostructures with a broadened waveguide fabricated by metalorganic chemical vapor deposition (radiation wavelength {lambda} = 900-920 nm) have been investigated. It is found that an increase in the energy depth and number of quantum wells (QWs) in the active region makes it possible to increase the temperature stability of the threshold current density and the differential quantum efficiency of semiconductor lasers on the basis of these structures. A temperature stability of threshold current density with a characteristic parameter T{sub 0} = 290 K has been obtained in lasers based on a heterostructure with four QWs. It is experimentally shown that the laser parameters are stabilized due to the decrease in the threshold current density and threshold carrier density in the QWs of the active region. It is also demonstrated that, when the carrier concentration in these QWs reaches a certain value, the temperature stability of the threshold current density and differential quantum efficiency sharply decreases.

36 MATERIALS SCIENCE↗

Terahertz emission upon the band-to-band excitation of Group-IV semiconductors at room temperature

Terahertz emission upon the band-to-band excitation of Group-IV semiconductors (Si:B and Ge:Ga) at room temperature by a semiconductor laser emitting in the visible range (660 nm) is observed and investigated. It is established that, as the crystal temperature is elevated above room temperature, the emission intensity increases considerably, while the emission spectrum shifts to higher frequencies. The terahertz-emission spectra of germanium and silicon are quite similar to each other. The pump-intensity dependence of the terahertz-emission intensity is nearly linear. The above features make it possible to attribute the observed terahertz emission to the effect of crystal heating by absorbed pump radiation.

36 MATERIALS SCIENCE↗

Origin of discrepancies in the experimental values of the barrier height at metal–semiconductor junctions

A possible explanation is suggested for discrepancies between experimental values obtained by different authors for the barrier height at the same metal–semiconductor junction. It is supposed that the problem is caused primarily by the structural inhomogeneity of the metal. As a result, the junction behaves as an assembly of a large number of subjunctions connected in parallel. To determine the effect of metal inhomogeneity on the properties of a junction, the dependence of the barrier height in a Schottky diode on the junction area is investigated under the assumption that, with an increase in the area of a junction between a singlecrystal semiconductor and a polycrystalline metal, the degree of inhomogeneity and, thus, the number of subjunctions, increases.

36 MATERIALS SCIENCE↗

Performance of an MPI-only semiconductor device simulator on a quad socket/quad core InfiniBand platform.

This preliminary study considers the scaling and performance of a finite element (FE) semiconductor device simulator on a capacity cluster with 272 compute nodes based on a homogeneous multicore node architecture utilizing 16 cores. The inter-node communication backbone for this Tri-Lab Linux Capacity Cluster (TLCC) machine is comprised of an InfiniBand interconnect. The nonuniform memory access (NUMA) nodes consist of 2.2 GHz quad socket/quad core AMD Opteron processors. The performance results for this study are obtained with a FE semiconductor device simulation code (Charon) that is based on a fully-coupled Newton-Krylov solver with domain decomposition and multilevel preconditioners. Scaling and multicore performance results are presented for large-scale problems of 100+ million unknowns on up to 4096 cores. A parallel scaling comparison is also presented with the Cray XT3/4 Red Storm capability platform. The results indicate that an MPI-only programming model for utilizing the multicore nodes is reasonably efficient on all 16 cores per compute node. However, the results also indicated that the multilevel preconditioner, which is critical for large-scale capability type simulations, scales better on the Red Storm machine than the TLCC machine.

97 MATHEMATICS AND COMPUTING↗

Cleaner Chips: Decarbonization in Semiconductor Manufacturing

The growth of the information and communication technology sector has vastly accelerated in recent decades because of advancements in digitalization and Artificial Intelligence (AI). Scope 1, 2, and 3 greenhouse gas emissions data of the top six semiconductor manufacturing companies (Samsung Electronics, Taiwan Semiconductor Manufacturing Corporation, Micron, SK Hynix, Kioxia, and Intel) were gathered from the publicly accessible Carbon Disclosure Project’s (CDP) website for 2020. Scope 3 emissions had the largest share in total annual emissions with an average share of 52%, followed by Scope 2 (32%) and Scope 1 (16%). Because of the absence of a standardized methodology for Scope 3 emissions estimation, each company used different methodologies that resulted in differences in emissions values. An analysis of the CDP reporting data did not reveal information on strategies implemented by companies to reduce Scope 3 emissions. The use of renewable energy certificates had the largest effect on decarbonization centered on reducing Scope 2 emissions, followed by the deployment of perfluorocarbon reduction technologies to help reduce Scope 1 fugitive emissions. Technology-specific marginal abatement costs of CO2 were also estimated and varied between −416 and 12,215 USD/t CO2 eq., which primarily varied depending on the technology deployed.

42 ENGINEERING↗

Electrodeposition of Actinides on a Semiconductor Detector for Concentration Monitoring

Pyroprocessing is a promising technology for separation and recycle of actinides from spent nuclear fuel. It is being actively researched in the United States as well as the Republic of Korea for possible implementation into a closed nuclear fuel cycle. The features of the chemical technology behind pyro-processing, unfortunately, present difficulties for real time accounting of actinides. Development of optimal process monitoring technology and safeguards approaches are, thus, a high priority for completing the development of the overall process technology. Real time monitoring of actinide concentrations in the molten salt electro-refiners is particularly important to achieve because of the potential for multiple significant quantities of plutonium in the molten salt. To address this need, development of a semiconductor detector for real-time monitoring of actinides in molten chloride salt (LiCl-KCl) is being conducted. Towards this end, a novel alpha spectroscopy detection system is being developed using wide band-gap semiconductor material, such as GaN or SiC, with a Boron-Doped-Diamond (BDD) contact. The objective is to deposit a thin layer of actinides onto the BDD layer, which will be used to measure the alpha particle spectrum that will distinguish individual actinides and their concentration. In the first stage, the actinide electrodeposition onto a surrogate material for the detector has been undertaken. While this project is in its very early states, a couple of observations have been made. One is that the electrodeposition is a slow, diffusion-controlled process. Therefore the deposit should be as thin (≅1 m) as the alpha spectroscopy permits (the resolution gets inferior with lesser number of atoms). Also, applied potentials should not be too negative; otherwise the deposit does not adhere well to the surface. The application of this method to measuring actinides in molten salt appears to be feasible, and a considerable amount of further investigation is planned. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Tuning Conjugated Polymer Chain Packing for Stretchable Semiconductors

We report in order to apply polymer semiconductors to stretchable electronics, they need to be easily deformed under strain without being damaged. A small number of conjugated polymers, typically with semicrystalline packing structures, have been reported to exhibit mechanical stretchability. Herein, a method is reported to modify polymer semiconductor packing-structure using a molecular additive, dioctyl phthalate (DOP), which is found to act as a molecular spacer, to be inserted between the amorphous chain networks and disrupt the crystalline packing. As a result, large-crystal growth is suppressed while short-range aggregations of conjugated polymers are promoted, which leads to an improved mechanical stretchability without affecting charge-carrier transport. Due to the reduced conjugated polymer intermolecular interactions, strain-induced chain alignment and crystallization are observed. By adding DOP to a well-known conjugated polymer, poly[2,5-bis(4-decyltetradecyl)pyrrolo[3,4-c]pyrrole-1,4-(2H,5H)-dione-(E)-1,2-di(2,2 '-bithiophen-5-yl)ethene] (DPPTVT), stretchable transistors are obtained with anisotropic charge-carrier mobilities under strain, and stable current output under strain up to 100%.

36 MATERIALS SCIENCE↗

Synthetic Control of Water-Stable Hybrid Perovskitoid Semiconductors

Hybrid metal-halide perovskites and their derived materials have emerged as the next-generation semiconductors with a wide range of applications, including photovoltaics, light-emitting devices, and other optoelectronics. Over the past decade, numerous single-crystalline perovskite derivatives have been synthesized and developed. However, the synthetic methods for these derivatives mainly rely on acidic crystallization conditions. This approach leads to crystals comprising metal halide building blocks, which show problematic stability when directly exposed to water. In this study, a methodology is developed for synthesizing hybrid metal-halide compounds using lead iodide and the zwitterionic bifunctional molecule cysteamine (CYS), to form various perovskitoid structures under a broad pH range. Interestingly, the different pH conditions alter the coordination environment of lead halides, leading to lead-sulfide and lead-nitride covalent bond formation. This modification significantly enhances their stability when in direct contact with water, lasting for months. Photoluminescence measurements and first principal density functional theory (DFT) calculations reveal that the perovskitoids synthesized under basic and acidic pH conditions exhibit a direct bandgap nature, while those synthesized under neutral conditions display an indirect bandgap. This approach opens new avenues for manipulating synthetic methods to develop water-stable hybrid semiconductors suitable for a wide range of applications, such as solid-state light emitters.

36 MATERIALS SCIENCE↗

Revealing the Electrophilic‐Attack Doping Mechanism for Efficient and Universal p‐Doping of Organic Semiconductors

Abstract Doping is of great importance to tailor the electrical properties of semiconductors. However, the present doping methodologies for organic semiconductors (OSCs) are either inefficient or can only apply to some OSCs conditionally, seriously limiting their general applications. Herein, a novel p‐doping mechanism is revealed by investigating the interactions between the dopant trityl tetrakis(pentafluorophenyl) borate (TrTPFB) and poly(3‐hexylthiophene) (P3HT). It is found that electrophilic attack of the trityl cations on thiophenes results in the formation of tritylated thiophenium ions, which subsequently induce electron transfer from neighboring P3HT chains to realize p‐doping. This unique p‐doping mechanism enables TrTPFB to p‐dope various OSCs including those with high ionization energy (IE ≈ 5.8 eV). Moreover, this doping mechanism endows TrTPFB with strong doping capability, leading to doping efficiency of over 80% in P3HT. The discovery and elucidation of this novel doping mechanism not only points out that strong electrophiles are a class of efficient p‐dopants for OSCs, but also provides new opportunities toward highly efficient doping of various OSCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recent Advances in Understanding the Structure and Properties of Amorphous Oxide Semiconductors

Here, amorphous oxide semiconductors (AOSs)—ternary or quaternary oxides of post-transition metals such as In-Sn-O, Zn-Sn-O, or In-Ga-Zn-O—have been known for a decade and have attracted a great deal of attention as they pos-sess several technological advantages, including low-temperature large-area deposition, mechanical flexibility, smooth surfaces, and high carrier mobility that is an order of magnitude larger than that of amorphous silicon (a-Si:H). Compared to their crystalline counterparts, the structure of AOSs is extremely sensitive to deposition conditions, stoichiometry, and composition, giving rise to a wide range of tunable optical and electrical properties. The large parameter space and the resulting complex deposition–structure–property relationships in AOSs make the currently available theoretical and experimental research data rather scattered and the design of new materials difficult. In this work, the key properties of several In-based AOSs are studied as a function of cooling rates, oxygen stoichiometry, cation composition, or lattice strain. Based on a thor-ough comparison of the results of ab initio mode ling, comprehensive structural analysis, accurate property calculations, and systematic experimental measure-ments, a four-dimensional parameter space for AOSs is derived, serving as a solid foundation for property optimization in known AOSs and for design of next-generation transparent amorphous semiconductors.

36 MATERIALS SCIENCE↗

Synthetic Strategies for Semiconductor Nanocrystals Expressing Localized Surface Plasmon Resonance

The field of semiconductor plasmonics has grown rapidly since its outset, only roughly six years ago, and now includes many crystalline substances ranging from GeTe to wide-bandgap transition-metal oxides. One byproduct of this proliferation is the sea of differing synthetic methods to realize localized surface plasmon resonances (LSPRs) based on the studied material. While strategies vary widely from material to material, all have the common goal of introducing extremely high carrier densities to the semiconductor system. This doping results in tunable, size-quantized, and on/off-switchable LSPR modes, which are a complete departure from traditional metal-nanoparticle-based plasmon resonances. This Minireview will provide an overview of the current state of nanocrystal and quantum-dot plasmonics and the physical basis thereof, however its main purpose is to summarize the methods for realizing LSPRs in the various syntheses and systems that have been reported to date.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transport and optical properties of the chiral semiconductor Ag 3 AuSe 2

Previous band structure calculations predicted Ag 3 AuSe 2 to be a semiconductor with a band gap of approximately 1 eV. Here, we report single crystal growth of Ag 3 AuSe 2 and its transport and optical properties. Single crystals of Ag 3 AuSe 2 were synthesized by slow-cooling from the melt, and grain sizes were confirmed to be greater than 2 mm using electron backscatter diffraction. Optical and transport measurements reveal that Ag 3 AuSe 2 is a highly resistive semiconductor with a band gap and activation energy around 0.3 eV. Our first-principles calculations show that the experimentally determined band gap lies between the predicted band gaps from GGA and hybrid functionals. We predict band inversion to be possible by applying tensile strain. The sensitivity of the gap to Ag/Au ordering, chemical substitution, and heat treatment merit further investigation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magneto-electronic and Thermodynamic Properties of Quaternary NiFeMnZ (Z = In, Sn) New Spin Gapless Semiconductors

This paper deals with investigation of magneto-electronic and thermodynamic properties of new spin gapless semiconductor quaternary NiFeMnZ (Z = In, Sn) Heusler alloys. In addition, electronic properties such as band structure and density of states were studied in detail. The obtained results are based on first-principles calculations, using the full potential linearized augmented plane wave (FP-LAPW) method within well-known generalized gradient approximation (GGA) coupling with spin-orbit calculation (SOC) in framework of the density functional theory (DFT) implemented in the WIEN2k package. As results, the alloys were found to be new spin gapless semiconductors (SGSs), and both compounds in LiMgPdSn-type crystal structure are stable. The magnetic moment of NiFeMnIn and NiFeMnSn was 4.39 and 4.99 μ{sub B} per formula unit, respectively. This result is in agreement with the Slater-Pauling rule (M{sub tot} = 24 −Z{sub tot}). Furthermore, the thermodynamic properties were also predicted. All these multifunctionalities lead to crucial interest for developing future spintronics device generations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ferromagnetism and Carrier Transport in n-type Diluted Magnetic Semiconductors Ge{sub 0.96−x}Bi{sub x}Fe{sub 0.04}Te Thin Film

The structural, Hall effect, electronic transport, and magnetic properties of Ge{sub 0.96−x}Bi{sub x}Fe{sub 0.04}Te epitaxial thin film as prepared by pulsed laser deposition technique were reported. X-ray diffraction patterns including linear scans and phi scans confirmed that all films are high quality epitaxy and crystallinity. With the substitution of high valence Bi for Ge element, we found that the previous carriers of hole were changed to electron, which was testified by the negative slopes obtained from the measurements of Hall effect under different temperatures. The electronic transports show a typical semiconductor behavior and can be understood by the small polaron hopping model because the lattice distortions increase the electron-phonon interaction. An obvious ferromagnetic properties occur in the high Bi-doping Ge{sub 0.64}Bi{sub 0.32}Fe{sub 0.04}Te rather than in that with low Bi-doping concentration, indicating that the ferromagnetic establishment is entirely dependent on carrier’s transmissions. The first-principles calculation performed on this system also reveals that the ferromagnetic state exactly exists in the present n-type diluted magnetic semiconductors with Bi co-dopants.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optomechanical control of mode conversion in a hybrid semiconductor microcavity containing a quantum dot

The future of quantum communication systems and quantum networks heavily rely on the ability to fabricate and coherently control the conversion of photons between different modes based on a solid-state plateform. In this work, we propose and theoretically investigate a scheme to optomechanically control coherent mode conversion of optical photons by utilizing two optically coupled hybrid semiconductor microcavities containing a quantum dot (QD). One of the microcavity is pumped by an external laser and the second cavity is driven by light emitted by the QD that is embedded in the interface separating the two microcavities. The semiconductor microcavities can be fabricated using distributed Bragg reflectors and can be made movable. We have demonstrated that photon-mode-conversion efficiency can be coherently manipulated by the optomechanical mode under appropriate conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interface effects and relaxation processes in nanocomposites based on CdSe/ZnS semiconductor quantum dots and porphyrin molecules

Controllable self-assembly and properties of nanocomposites based on CdSe/ZnS semiconductor quantum dots (QDs) and tetrapyridylporphyrin molecules (H{sub 2}P) as well as the dynamics of relaxation processes in these systems were studied for solutions and single nanoobjects in the temperature range of 77–295 K. It was proved that the formation of surface states of different nature is crucial to nonradiative relaxation of exciton excitation in QDs. The efficiency of QD→Н{sub 2}Р energy transfer was shown to be at most 10–15%. Regularities of photoluminescence (PL) quenching for QDs in nanocomposites in solutions of different polarity correlate with the dependences of PL blinking for single QDs. A scheme was proposed of excited states and main relaxation channels of exciton excitation energy in semiconductor QDs and QD–Н{sub 2}Р nanocomposites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

To the Theory of the Polarized Radiation Absorption in a Semiconductor (001) Quantum Well

The paper considers absorption of linearly polarized radiation in a semiconductor size-quantized well related to optical transitions both between the branches of light and heavy holes and between the size-quantized subbands. Main features of the light absorption in an infinitely deep symmetric well are elucidated. These features are characterized by intraband absorption of light and associated with the direct optical transitions of holes between the subbands of the semiconductor valence band formed due to the size quantization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spin-Hall effect of collimated electrons in zinc-blende semiconductors

We describe an intrinsic spin-Hall effect (SHE) in n-type bulk zinc-blende semiconductors with a topological origin. When a collimated flux of electrons is injected into a zinc-blende semiconductor with Dresselhaus spin-orbit interaction, a nontrivial gauge structure appears in the momentum (k{sup {yields}}-) space of the electrons. The Berry curvature of this gauge field and the corresponding Lorentz force in k{sup {yields}}-space results in a finite SHE. The value of the spin-Hall current is found to be highly dependent on the degree of electron collimation, which may be varied by means of gate electrodes. Therefore, the system may potentially be useful as an electronically controllable source of pure spin-current for spintronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗