Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Structural effects of radiation-induced volumetric expansion on unreinforced concrete biological shields

Limited literature (Pomaro et al., 2011, Mirhosseini et al., 2014, Salomoni et al., 2014 and Andreev and Kapliy, 2014) is available on the structural analysis of irradiated concrete biological shield (CBS), although extended operations of nuclear powers plants may lead to critical neutron exposure above 1.0 × 10 +19 n cm ₋2 . To the notable exception of Andreev and Kapliy, available structural models do not account for radiation-induced volumetric expansion, although it was found to develop important linear dimensional change of the order of 1%, and, can lead to significant concrete damage (Le Pape et al., 2015). A 1D-cylindrical model of an unreinforced CBS accounting for temperature and irradiation effects is developed. Irradiated concrete properties are characterized probabilistically using the updated database collected by Oak Ridge National Laboratory (Field et al., 2015). The overstressed concrete ratio (OCR) of the CBS, i.e., the proportion of the wall thickness being subject to stresses beyond the resistance of concrete, is derived by deterministic and probabilistic analysis assuming that irradiated concrete behaves as an elastic materials. In the bi-axial compressive zone near the reactor cavity, the OCR is limited to 5.7%, i.e., 8.6 cm (3$_2^1$ in.), whereas, in the tension zone, the OCR extends to 72%, i.e., 1.08 m (42$_2^1$ in.). Finally, we find that these results, valid for a maximum neutron fluence on the concrete surface of 3.1 × 10 +19 n cm ₋2 (E > 0.1 MeV) and, obtained after 80 years of operation, give an indication of the potential detrimental effects of prolonged irradiation of concrete in nuclear power plants.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Advancements in cerium/titanium metal-organic frameworks: Unparalleled stability in CO oxidation

Due to the excellent catalytic properties of Ce-based materials, the development of thermally stable metal-organic frameworks (MOFs) based on Ce-oxo clusters has attracted significant attention but remains challenging. In this work, we report the synthesis of an unreported Ce 4 Ti 2 -TMA (Ce IV 4 Ti IV 2 O 4 (OH) 4 (C(CH 3 ) 3 COO) 12 ·3H 2 O·3MeCN) cluster, which serves as an ideal source for the assembly of robust Ce/Ti-MOFs. Using this cluster, we constructed two isostructural MOFs, denoted as NU-3000 and NU-3001. Single-crystal X-ray diffraction analysis confirms these MOFs as mesoporous structures with 12-coordinated Ce 3 Ti 3 nodes. Furthermore, structural analysis reveals a plane triangular node structure that likely contributes to the excellent thermal stability of these MOFs. Finally, both MOFs show catalytic activity toward high-temperature (250°C) CO oxidation and maintain significant porosity, emphasizing the thermal stability of these materials under practical catalytic conditions. Furthermore, the straightforward synthesis of thermally robust Ce/Ti-MOFs from the Ce 4 Ti 2 -TMA cluster will pave the way for future Ce/Ti-MOF-based catalyst development.

36 MATERIALS SCIENCE↗

Insights into the Complexation of Actinides by Diethylenetriaminepentaacetic Acid from Characterization of the Americium(III) Complex

Diethylenetriaminepentaacetic acid (DTPA) is a frequently used chelator in the nuclear and medical industries, especially for the complexation of trivalent actinides. However, structural data on these complexes in the solid-state have long remained elusive. Herein, a detailed structural analysis of the presented crystal structures of [C(NH 2 ) 3 ] 4 [Nd(DTPA)] 2 · n H 2 O and [C(NH 2 ) 3 ] 4 [Am(DTPA)] 2 · n H 2 O, where [C(NH 2 ) 3 ] + is guanidinium, details the subtle differences in the Lewis acidity between a lanthanide/actinide pair of similar ionic sizes. Contractions in nitrogen–metal bond lengths between neodymium(III) and americium(III) were observed, while the metal–oxygen bonds remained relatively consistent, highlighting the marginal favorability for actinide complexation over the lanthanides with moderately soft N-donors. Spectroscopic analysis shows significant splitting of many transitions and relatively strong electronic interactions with traditionally low-intensity transitions in the americium complex, as is demonstrated in the 7 F 0 → 7 F 5 transitions. Pressure-induced spectroscopic analysis showed surprisingly little effect on the americium complex, with 5 f →5 f transitions either not shifting or marginally shifting from 2 to 3 nm at 11.93 ± 0.06 GPa─atypical of a soft, N-donor americium complex under pressure. Finally, large voids occupied by water molecules in between the complexes within the crystal structure may be responsible for the lack of pressure response in the 5 f →5 f transitions.

absorption spectroscopy↗

Refinement of Modeling Techniques for the Structural Evaluation of Hanford Single-Shell Nuclear Waste Storage Tanks - 12288

The single-shell tanks at the Hanford Site (in Washington State, USA) were constructed between 1943 and 1964 and are well beyond their estimated 25 year design life. This article discusses the structural analysis approach and modeling challenges encountered during the ongoing analysis of record for evaluating the structural integrity of the single-shell tanks. There are several geometrical and material nonlinearities and uncertainties to be dealt with while performing the modern finite element analysis of these tanks. The analysis takes into account the temperature history of the tanks and allowable mechanical operating loads for proper estimation of creep strains and thermal degradation of material properties. The loads prescribed in the analysis of record models also include anticipated loads that may occur during waste retrieval and closure. Due to uncertainty in a number of modeling details, sensitivity studies were conducted to address questions related to boundary conditions that realistically or conservatively represent the influence of surrounding tanks in a tank farm, the influence of backfill excavation slope, the extent of backfill and the total extent of undisturbed soil surrounding the backfill. Because of the limited availability of data on the thermal and operating history for many of the individual tanks, some of the data was assumed or interpolated. However, the models developed for the analysis of record represent the bounding scenarios and include the loading conditions that the tanks were subjected to or anticipated. The modeling refinement techniques followed in the analysis of record resulted in conservative estimates for force and moment demands at various sections in the concrete tanks. This article discusses the modeling aspects related to Type-II and Type-III single-shell tanks. The modeling techniques, methodology and evaluation criteria developed for evaluating the structural integrity of single-shell tanks at Hanford are in general applicable to other similar tanks or underground concrete storage structures. This article presented the details of the finite element models and analysis approach followed during the ongoing effort to establish structural integrity of single shell tanks at the Hanford site. The details of the material constitutive models applicable to the underground Hanford concrete tanks that capture the thermal and creep induce degradation are also presented. The thermal profiles were developed based on the available tank temperature data for the Type II and Type III single-shell tanks, and they were chosen to yield conservative demands under the thermal and operating loads analysis of these tanks. Sensitivity studies were conducted to address two issues regarding the soils modeled around the single-shell tanks. The results indicate that excluding the boundary separating the backfill soil from the undisturbed soil will result in conservative demands (plots 14b and 14c green lines for circumferential Demand/Capacity ratios). The radial extent study indicated that the soil model extending to 240 ft gave more conservative results than the model with 62 ft of soil (plots 17a and 17c magenta lines for hoop Demand/Capacity ratios). Based on these results, a 240 ft far-field soil boundary with backfill throughout the lateral extent was recommended and used for the finite element models used in the Type-II and Type-III analyses of record. The modeling effort and sensitivity studies discussed in this article helped in developing bounding models for the structural integrity evaluation of single shell tanks at the Hanford site. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Structures of the Neisseria meningitides methionine-binding protein MetQ in substrate-free form and bound to l - and d -methionine isomers

The bacterial periplasmic methionine-binding protein MetQ is involved in the import of methionine by the cognate MetNI methionine ATP binding cassette (ABC) transporter. The MetNIQ system is one of the few members of the ABC importer family that has been structurally characterized in multiple conformational states. Critical missing elements in the structural analysis of MetNIQ are the structure of the substrate-free form of MetQ, and detailing how MetQ binds multiple methionine derivatives, including both l- and d-methionine isomers. In this study, we report the structures of the Neisseria meningitides MetQ in substrate-free form and in complexes with l-methionine and with d-methionine, along with the associated binding constants determined by isothermal titration calorimetry. Structures of the substrate-free (N238A) and substrate-bound N. meningitides MetQ are related by a “Venus-fly trap” hinge-type movement of the two domains accompanying methionine binding and dissociation. l- and d-methionine bind to the same site on MetQ, and this study emphasizes the important role of asparagine 238 in ligand binding and affinity. A thermodynamic analysis demonstrates that ligand-free MetQ associates with the ATP-bound form of MetNI ~40 times more tightly than does liganded MetQ, consistent with the necessity of dissociating methionine from MetQ for transport to occur.

59 BASIC BIOLOGICAL SCIENCES↗

Defects Induced Magnetism in WO{sub 3} and Reduced Graphene Oxide-WO{sub 3} Nanocomposites

A series of reduced graphene oxide (rGO)-WO{sub 3} nanocomposites were prepared by hydrothermal method using GO and tungsten complex. The nanocomposites were characterized by powder XRD, Raman spectroscopy, FT-IR spectroscopy, HRTEM, XPS, photoluminescence (PL), and magnetic studies. The structural analysis confirms the hexagonal crystal structure and formation of rGO-WO{sub 3} nanocomposites. HRTEM images show rod-like shape WO{sub 3} distributed on the wrinkle structure of rGO sheets. XPS results confirm the oxidation state and oxygen vacancies present in the samples. PL spectra of the samples show blue emission and indicate the existence of surface defects and oxygen vacancies. The M–H loop of rGO-WO{sub 3} nanocomposites reveal that the co-existence of both ferro and antiferromagnetism at room temperature. The incorporation of rGO sheets notably increase magnetic behavior of composites due to extended C–C bond conducts much stronger coupling between the 5d and 6s orbitals of tungsten and carbon atoms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of local atomic configuration in AlGdN phosphor thin films on deep ultra-violet luminescence intensity

We investigated the narrowband ultraviolet emission properties of Al{sub 0.94}Gd{sub 0.06}N phosphor thin films pumped by an electron beam. An extremely narrow luminescence line, which was less than 1 nm from the intra-orbital f-f transition in Gd{sup 3+} ions, was confirmed at 318 nm. The corresponding emission efficiency was improved by decreasing the growth temperature. The extended X-ray absorption fine structure analysis of the local atomic structure revealed that a low-temperature growth led to the formation of a uniform atomic configuration around Gd, which was found to play a key role in improving the luminescence intensity of the films.

36 MATERIALS SCIENCE↗

Site selectivity on chalcogen atoms in superconducting La(O,F)BiSSe

Single crystals of La(O,F)BiSSe were grown by using a CsCl flux method. Single crystal X-ray structural analysis reveals that the crystal structure is isostructural to the BiS{sub 2}- or BiSe{sub 2}-based compounds crystallizing with space group P4/nmm (lattice parameters a = 4.1110(2) Å, c = 13.6010(7) Å). However, the S atoms are selectively occupied at the apical site of the Bi-SSe pyramids in the superconducting layer. The single crystals show a superconducting transition at around 4.2 K in the magnetic susceptibility and resistivity measurements. The superconducting anisotropic parameter is determined to be 34–35 from its upper critical magnetic field. The anisotropy is in the same range with that of other members of the La(O,F)BiCh{sub 2} (Ch = S, Se) family under ambient pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In situ electrochemical high-energy X-ray diffraction using a capillary working electrode cell geometry

The ability to generate new electrochemically active materials for energy generation and storage with improved properties will likely be derived from an understanding of atomic-scale structure/function relationships during electrochemical events. Here, the design and implementation of a new capillary electrochemical cell designed specifically for in situ high-energy X-ray diffraction measurements is described. By increasing the amount of electrochemically active material in the X-ray path while implementing low- Z cell materials with anisotropic scattering profiles, an order of magnitude enhancement in diffracted X-ray signal over traditional cell geometries for multiple electrochemically active materials is demonstrated. This signal improvement is crucial for high-energy X-ray diffraction measurements and subsequent Fourier transformation into atomic pair distribution functions for atomic-scale structural analysis. As an example, clear structural changes in LiCoO 2 under reductive and oxidative conditions using the capillary cell are demonstrated, which agree with prior studies. Accurate modeling of the LiCoO 2 diffraction data using reverse Monte Carlo simulations further verifies accurate background subtraction and strong signal from the electrochemically active material, enabled by the capillary working electrode geometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Turbulence Modeling with Nek5000/RS, SOD2D and Alya

We present Validation and Verification (V & V) study of two high-order spectral element method (SEM) based Computational Fluid Dyanimcs (CFD) codes that we will utilize for work on turbulence modeling: Nek5000 and SOD2D. While the former solves the incompressible form of Navier-Stokes equation, the latter works with compressible set of equations and uses an entropy-viscosity formulation to account for the discontinuities for high Mach number flows. We demonstrate the accuracy of these codes for two benchmark sub-sonic turbulent flows: periodic channel and pipe flow, by carrying out first and second order statistical analysis, grid convergence and turbulent structure analysis using wall-resolved large eddy simulations (WRLES). Later, we report on the implementation and testing of various wall-modeling strategies for large eddy simulation of turbulent flows in Nek5000. These include both classical log-law based and decision-tree based machine-learning models. Accuracy of these closure strategies are analyzed and necessary future work is outlined.

97 MATHEMATICS AND COMPUTING↗

Analysis of flexible structures under lateral impact

Three methods for analysis of flexible structures under lateral impact are presented. The first proposed method (Method A) consists of: (1) modifying an available deceleration on a rigid target with conservation principles to account for structural flexibility; and (2) transient nonlinear analysis of the structure with the corrected forcing function. The second proposed method (Method B) is similar to Method A in obtaining the forcing function but it solves the equations of motion of an idealized two-degree-of-freedom system instead of directly using conservation principles. The last method simply provides the maximum force in the structure using the conservation of energy and linear momentum. A coupled simulation is also performed in LS-DYNA and compared against the proposed methods. A case study is presented to illustrate the applicability of all three methods and the LS-DYNA simulation. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Structure of the polysaccharide sheath from the B race of the green microalga Botryococcus braunii

The green microalga Botryococcus braunii forms a colony of cells held together by an intricate extracellular matrix. This extracellular matrix also acts as a storage location for liquid hydrocarbons initially produced inside the cells. These hydrocarbons can be used as feedstocks to produce transportation fuels. In the B race of B. braunii, the extracellular matrix is composed of several elements: a cross-linked hydrocarbon network filled with the liquid hydrocarbons, a retaining wall to hold the hydrocarbons in the extracellular matrix, an arabinogalactan polysaccharide fibrillar sheath that extends outward from the retaining wall, and a single protein known as polysaccharide associated protein is found at the base of the polysaccharide fibers where they connect to the retaining wall. During growth, colonies of the B race of B. braunii shed fragments of the retaining wall with polysaccharide fibrils attached into the media. Here we describe the isolation and structural analysis of these polysaccharides using a series of chemical degradations in combination with glycosyl residue composition and linkage analysis, as well as 2-dimensional nuclear magnetic resonance spectroscopy. The results demonstrate that the polysaccharide is highly branched, consisting of a galactan backbone with short branches comprised of Dgalactopyranose, L-arabinofuranose, 4-O-methyl-D-glucopyranuronic acid, and 6-deoxy-D-altropyranose. To our knowledge, this is the first description of 6-deoxyaltrose in algae or plants.

59 BASIC BIOLOGICAL SCIENCES↗

Structure-Based Comparative Analysis and Prediction of N-Linked Glycosylation Sites in Evolutionarily Distant Eukaryotes

Abstract The asparagine-X-serine/threonine (NXS/T) motif, where X is any amino acid except proline, is the consensus motif for N-linked glycosylation. Significant numbers of high-resolution crystal structures of glycosylated proteins allow us to carry out structural analysis of the N-linked glycosylation sites (NGS). Our analysis shows that there is enough structural information from diverse glycoproteins to allow the development of rules which can be used to predict NGS. A Python-based tool was developed to investigate asparagines implicated in N-glycosylation in five species: Homo sapiens, Mus musculus, Drosophila melanogaster, Arabidopsis thaliana and Saccharomyces cerevisiae. Our analysis shows that 78% of all asparagines of NXS/T motif involved in N-glycosylation are localized in the loop/turn conformation in the human proteome. Similar distribution was revealed for all the other species examined. Comparative analysis of the occurrence of NXS/T motifs not known to be glycosylated and their reverse sequence (S/TXN) shows a similar distribution across the secondary structural elements, indicating that the NXS/T motif in itself is not biologically relevant. Based on our analysis, we have defined rules to determine NGS. Using machine learning methods based on these rules we can predict with 93% accuracy if a particular site will be glycosylated. If structural information is not available the tool uses structural prediction results resulting in 74% accuracy. The tool was used to identify glycosylation sites in 108 human proteins with structures and 2247 proteins without structures that have acquired NXS/T site/s due to non-synonymous variation. The tool, Structure Feature Analysis Tool (SFAT), is freely available to the public at http://hive.biochemistry.gwu.edu/tools/sfat.

59 BASIC BIOLOGICAL SCIENCES↗

Crystal structure of the Arabidopsis SPIRAL2 C-terminal domain reveals a p80-Katanin-like domain

Epidermal cells of dark-grown plant seedlings reorient their cortical microtubule arrays in response to blue light from a net lateral orientation to a net longitudinal orientation with respect to the long axis of cells. The molecular mechanism underlying this microtubule array reorientation involves katanin, a microtubule severing enzyme, and a plant-specific microtubule associated protein called SPIRAL2. Katanin preferentially severs longitudinal microtubules, generating seeds that amplify the longitudinal array. Upon severing, SPIRAL2 binds nascent microtubule minus ends and limits their dynamics, thereby stabilizing the longitudinal array while the lateral array undergoes net depolymerization. To date, no experimental structural information is available for SPIRAL2 to help inform its mechanism. To gain insight into SPIRAL2 structure and function, we determined a 1.8 Å resolution crystal structure of the Arabidopsis thaliana SPIRAL2 C-terminal domain. The domain is composed of seven core α-helices, arranged in an α-solenoid. Amino-acid sequence conservation maps primarily to one face of the domain involving helices α1, α3, α5, and an extended loop, the α6-α7 loop. The domain fold is similar to, yet structurally distinct from the C-terminal domain of Ge-1 (an mRNA decapping complex factor involved in P-body localization) and, surprisingly, the C-terminal domain of the katanin p80 regulatory subunit. The katanin p80 C-terminal domain heterodimerizes with the MIT domain of the katanin p60 catalytic subunit, and in metazoans, binds the microtubule minus-end factors CAMSAP3 and ASPM. Structural analysis predicts that SPIRAL2 does not engage katanin p60 in a mode homologous to katanin p80. The SPIRAL2 structure highlights an interesting evolutionary convergence of domain architecture and microtubule minus-end localization between SPIRAL2 and katanin complexes, and establishes a foundation upon which structure-function analysis can be conducted to elucidate the role of this domain in the regulation of plant microtubule arrays.

59 BASIC BIOLOGICAL SCIENCES↗