Measurement of Spin Dynamics in a Layered Nickelate Using X-Ray Photon Correlation Spectroscopy: Evidence for Intrinsic Destabilization of Incommensurate Stripes at Low Temperatures
Not Available
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Not Available
Small-angle neutron scattering (SANS) is one of the most important techniques for microstructure determination, being utilized in a wide range of scientific disciplines, such as materials science, physics, chemistry, and biology. The reason for its great significance is that conventional SANS is probably the only method capable of probing structural inhomogeneities in the bulk of materials on a mesoscopic real-space length scale from roughly 1 to 300 nm. Moreover, the exploitation of the spin degree of freedom of the neutron provides SANS with a unique sensitivity to study magnetism and magnetic materials at the nanoscale. As such, magnetic SANS ideally complements more real-space and surface-sensitive magnetic imaging techniques, e.g., Lorentz transmission electron microscopy, electron holography, magnetic force microscopy, Kerr microscopy, or spin-polarized scanning tunneling microscopy. This review summarizes the recent applications of the SANS method to study magnetism and magnetic materials. Here, this includes a wide range of materials classes from nanomagnetic systems such as soft magnetic Fe-based nanocomposites, hard magnetic Nd-Fe-B-based permanent magnets, magnetic steels, ferrofluids, nanoparticles, and magnetic oxides to more fundamental open issues in contemporary condensed matter physics such as skyrmion crystals, noncollinear magnetic structures in noncentrosymmetric compounds, magnetic or electronic phase separation, and vortex lattices in type-II superconductors. Special attention is paid not only to the vast variety of magnetic materials and problems where SANS has provided direct insight, but also to the enormous progress made regarding the micromagnetic simulation of magnetic neutron scattering.
Motivated by recent developments in the study of quasi-one-dimensional iron systems with Fe 2+ , we comprehensively study an Fe 3+ chalcogenide chain system. Based on first-principles calculations, the Fe 3+ chain has a similar electronic structure to that discussed before for the Fe 2+ chain, because of the similar Fe𝑋 4 (𝑋 = S or Se) tetrahedron-chain geometry. Furthermore, a three-orbital electronic Hubbard model for this chain was constructed using the density matrix renormalization group method. A robust antiferromagnetic coupling was unveiled in the chain direction. In addition, in the intermediate electronic correlation 𝑈/𝑊 region, we found an interesting orbital-selective Mott phase with the coexistence of localized and itinerant electrons (𝑈 is the on-site Hubbard repulsion, while 𝑊 is the electronic bandwidth) based on the orbital-selective behavior observed in the charge fluctuations. Furthermore, we do not observe any obvious pairing tendency in the Fe 3+ chain in the electronic-correlation 𝑈/𝑊 region, where superconducting pairing tendencies were reported before in iron ladders. This suggests that superconductivity is unlikely to emerge in the Fe 3+ systems. Finally, our results clearly establish the similarities and differences between Fe 2+ and Fe 3+ iron chains, as well as iron ladders.
The crystal structure and the magnetic properties of the HTSC cuprates YBa{sub 2}Cu{sub 3}O{sub 6 + δ}, Y{sub 1 ‒} {sub x}Ca{sub x}Ba{sub 2}Cu{sub 3}O{sub 6 + δ}, and Nd{sub 1 +x}Ba{sub 2 –x}Cu{sub 3}O{sub 6 + δ} (x = 0.2) with the structure of a layered perovskite are studied. The well-known aging effect detected in these HTSC materials during storage under standard conditions, namely, an increase in their critical temperature T{sub c} and a decrease in lattice parameter c in time, is investigated. Using YBa{sub 2}Cu{sub 3}O{sub 6 + δ} as an example, we show that the dependence of c on the oxygen content undergoes the following changes in time: (1) the negative slope of the dependence with respect to axis δ increases and (2) nonlinearity appears and grows in time according to a quadratic law. The first type of changes is explained by an increase in the valence of copper ions, which is accompanied by a decrease in their radius. The second type is explained by the electrostatic interaction of structural CuO{sub 2} planes due to the accumulation of electron holes, which come from CuO{sub δ} planes, in them. The calculation of the second type of changes in parameter c in the YBa{sub 2}Cu{sub 3}O{sub 6 + δ} cuprate exhibits good quantitative agreement with the experimental data. The second-type changes in the Y{sub 1 –x}Ca{sub x}Ba{sub 2}Cu{sub 3}O{sub 6 + δ} compound (hole doping of CuO{sub 2} planes) turn out to be identical to those in YBa{sub 2}Cu{sub 3}O{sub 6 + δ}. However, the differently directed (in time) changes in lattice parameter c in Nd{sub 1 +x}Ba{sub 2 –x}Cu{sub 3}O{sub 6 + δ} indicate that the CuO{sub 2} planes in the neodymium cuprate are doped by electrons at the initial stage of aging. However, when these planes are saturated with holes in time, the type of doping changes from n to p without a noticeable change in the crystal structure, which has been considered to be impossible for layered cuprates to date.
Possible superconductive pairing of two electrons separated by barrier leading to higher transition temperature for superconductors and superconductivity in magnetic metals
Materials selection for electronic component research, discussing metals, semiconductors, insulators, magnetic materials and superconductors
In this strategy of depositing the basic building blocks of superconductors, semiconductors, and dielectric having common elements, researchers deposited superconducting films of Y-Ba-Cu-O, semiconductor films of Cu2O, and dielectric films of BaF2 and Y2O3 by metal oxide chemical vapor deposition (MOCVD). By switching source materials entering the chamber, and by using direct writting capability, complex device structures like three-terminal hybrid semiconductors/superconductors transistors can be fabricated. The Y-Ba-Cu-O superconducting thin films on BaF2/YSZ substrates show a T(sub c) of 80 K and are textured with most of the grains having their c-axis or a-axis perpendicular to the substrate. Electrical characteristics as well as structural characteristics of superconductors and related materials obtained by x-ray defraction, electron microscopy, and energy dispersive x-ray analysis are discussed.
In this strategy of depositing the basic building blocks of superconductors, semiconductors, and dielectrics having common elements, researchers deposited superconducting films of Y-Ba-Cu-O, semiconductor films of Cu2O, and dielectric films of BaF2 and Y2O3 by metal oxide chemical vapor deposition (MOCVD). By switching source materials entering the chamber, and by using direct writing capability, complex device structures like three terminal hybrid semiconductor/superconductor transistors can be fabricated. The Y-Ba-Cu-O superconducting thin films on BaF2/YSZ substrates show a T(sub c) of 80 K and are textured with most of the grains having their c-axis or a-axis perpendicular to the substrate. Electrical characteristics as well as structural characteristics of superconductors and related materials obtained by x-ray deffraction, electron microscopy, and energy dispersive x-ray analysis are discussed.
Pressure-induced superconductivity has been widely explored and observed in Bi 2 Se 3 -based topological materials to hunt for topological superconductors. Although their triggered superconductivity has a close connection to their pressure-induced structural phase transitions, the quest for the electron pairing mechanism of these superconducting semiconductors in both their initial rhombohedral and high-pressure phases remains unknown. In this work, we present a systematic study of the pressure effect on superconducting properties and lattice dynamics using a combination of electrical transport, Raman-scattering, and synchrotron x-ray diffraction measurements using diamond anvil cells. One key finding is our observation of a cooperative connection between the strength of the electron–phonon interaction (EPI) generated by optical branches and the pressure-tunable superconductivity in rhombohedral Sr x Bi 2 Se 3 crystal. The underlying suppression mechanism of the T c by pressure is ascribed to the weakening of the electrons' interaction with the optical phonon modes in the rhombohedral phase. In the intermediate monoclinic phase, the T c value underwent a sharp increase with carrier density accumulation accompanying the concurrent enhanced EPI. This is intuitively unusual since it is expected that the EPI shall be weakened by inducing more conducting carriers in a normal metal. In the tetragonal phase, the superconductivity is interpreted within BCS theory, since it is fully metallized and obeys the adiabatic Born–Oppenheimer approximation well. Our findings are important to fully understand unconventional superconductivity and the unusual pairing mechanism in the layered rhombohedral Bi 2 Se 3 -based superconductors.
Single-crystalline bulk GdBa{sub 2}Cu{sub 3}O{sub 7−δ} (GdBCO) superconductors were fabricated with top-seeded infiltration-growth technique (TSIG) in air by adding the different amounts of Dy{sub 2}BaCuO{sub 5} (Dy-211) particles (5, 10, 15, 20, 25, 30, 35, and 40 wt%). All the samples show superconducting critical temperature at ∼93 K with sharp transition irrespective of the chemical composition. X-ray diffraction measurements confirmed that all the samples were single domain with high alignment. Microstructural studies through scanning electron microscopy showed that TSIG-processed GdBCO samples contained 211 phase particles of two different sizes, i.e., ∼2–4 and ∼10 μ m. The addition of Dy-211 phase particles led to a significant enhancement of critical current density (J{sub c}) at 77 K. GdBCO superconductor with the addition of 20 wt% of Dy-211 showed the highest J{sub c} of 45.5 kA/cm {sup 2} at 77 K and self field.
This is the final report on the award designed to foster a partnership between Louisiana State University and Los Alamos National Laboratory (LANL) in conducting fundamental research in support of energy needs. The general focus of the research effort was on developing a better understanding of materials with new functionalities. We investigated two distinct and very promising classes of new materials, which serve as a testing ground for many of the novel phenomena in condensed matter physics: the heavy fermion 115 series, where the interplay of strong interactions between the electrons leads to a rich variety of competing phases and anomalous properties, and newly discovered pnictide superconductors. The former focus was planned; the latter emerged during the collaborative effort with LANL. Our objective was to determine the origin, and to establish a functional effective theory description of the phases in these systems, and transitions between them. We report on the main accomplishments under the award that serves to clarify the nature of superconductivity in both families of materials. In particular, we collaborated with experimentalists to predict and analyze the magnetic field and temperature dependence of the bulk thermodynamic and transport properties and to determine the gap shape in CeCoIn₅ and in Ba(Fe 1-x Co x )₂As₂, investigated the Kondo temperature in the presence of spin-orbit coupling in the conduction band, and provided theoretical guidance for local probes such as scanning tunneling spectroscopy of vortex cores and impurity resonances, and magnetic force microscopy of the superconducting states.
We report the temperature dependence of the low-temperature specific heat down to 400 mK of the electron-doped Ba(Fe{sub 0.92}Co{sub 0.08}){sub 2}As{sub 2} superconductors. We have measured two samples extracted from the same batch: first sample has been measured just after preparation with no additional heat treatment. The sample shows T{sub c} = 20 K, residual specific heat {gamma}{sub 0} = 3.6 mJ/mol K{sup 2} and a Schottky-like contribution at low temperatures. A second sample has been annealed at 800 C for two weeks and shows T{sub c} = 25 K and {gamma}{sub 0} = 1.4 mJ/mol K{sup 2}. By subtracting the lattice specific heat, from pure BaFe{sub 2}As{sub 2}, the temperature dependence of the electronic specific heat has been obtained and studied. For both samples the temperature dependence of C{sub el}(T) clearly indicate the presence of low-energy excitations in the system. Their specific heat data cannot be described by single clean s- or d-wave models and the data requires an anisotropic gap scenario which may or may not have nodes.
We present a study of the possible plasmon excitations that can occur in systems where strong superconductivity is present. In these systems the plasmon energy is comparable to or smaller than the pairing gap. As a prototype of these systems we consider the proton component of Neutron Star matter just below the crust when electron screening is not taken into account. For the realistic case we consider in detail the different aspects of the elementary excitations when the proton, electron components are considered within the Random-Phase Approximation generalized to the superfluid case, while the influence of the neutron component is considered only at qualitative level. Electron screening plays a major role in modifying the proton spectrum and spectral function. At the same time the electron plasmon is strongly modified and damped by the indirect coupling with the superfluid proton component, even at moderately low values of the gap. The excitation spectrum shows the interplay of the different components and their relevance for each excitation modes. The results are relevant for neutrino physics and thermodynamical processes in neutron stars. If electron screening is neglected, the spectral properties of the proton component show some resemblance with the physical situation in high-T{sub c} superconductors, and we briefly discuss similarities and differences in this connection. In a general prospect, the results of the study emphasize the role of Coulomb interaction in strong superconductors.
Establishing ohmic contact to van der Waals semiconductors such as MoS 2 is crucial to unlocking their full potential in next-generation electronic devices. Encapsulation of few layer MoS 2 with hBN preserves the material’s electronic properties but makes electrical contacts more challenging. Progress toward high quality edge contact to encapsulated MoS 2 has been recently reported. Here, we evaluate a contact methodology using sputtered MoRe, a type II superconductor with a relatively high critical field and temperature commonly used to induce superconductivity in graphene. We find that the contact transparency is poor and that the devices do not support a measurable supercurrent down to 3 K, which has ramifications for future fabrication recipes.
Preparation of superconducting thin films of the Cu-doped Ruthenocuprate superconductor GdSr{sub 2}Ru{sub 0.9}Cu{sub 2.1}O{sub 8} has been attempted by pulsed laser deposition method. Thin films were deposited on different substrates employing different laser ablation parameters with the idea of obtaining good-quality films which exhibit superconductivity. The crystal structure and morphology of the thin films were characterized by X-ray diffraction and scanning electron microscopy measurements and optical characteristics by Raman scattering measurements. High-temperature ex situ oxygen annealing led to the formation of homogeneous films with the occurrence of an onset of superconductivity, traced by electrical resistivity measurements. Increasing the annealing time has led to a systematic improvement in the sample quality and the physical properties. However, prolonged high-temperature annealing seems to cause deterioration in properties as seen from electrical resistivity and Raman scattering measurements. The studies reveal the importance of an optimal high-temperature oxygen annealing procedure to induce superconductivity in thin films of this Ruthenocuprate system.
No abstract prepared.
Two-dimensional (2D) materials have extraordinary characteristics that offer promising new approaches for science and technology. Electrons in graphene can move ballistically through a sheet, even though it is only a single atom thick. And transition metal dichalcogenide materials can be cleaved into 2D flakes of all types – metals, semiconductors, insulators, magnetic materials, and superconductors. To benefit from these discoveries, the science needs to be understood to transform 2D materials into useful new devices and systems. The evolution in time of atomic scale graphene structures has been studied in time with a transmission electron microscope (TEM), and ballistic transport of electrons in graphene was been imaged using a cooled scanning probe microscope (SPM), as well as electron motion in MoS 2 . Graphene is only one atom thick but is extremely strong, creating the opportunity to fabricate atomic scale structures in the lateral direction. Using an atomic resolution TEM, a suspended sheet of graphene can be shaped by a Si impurity atom on its surface that acts like a chisel to open up apertures, one atom at a time. The electrons in the TEM provide both the chiseling energy and the ability to image the results. Electrons and holes in graphene form a new type of electronic system with conical conduction and valence bands that meet at the Dirac point, with no energy gap. For moderate densities, the carriers form a Fermi liquid with ballistic transport over micron-scale distances. Using a cooled SPM the cyclotron orbit of electrons in graphene has been imaged. In the magnetic focusing regime, electrons leaving a point contact circle around and leave from a second point contact when the cyclotron diameter is equal to the contact spacing. The paths of electrons are focused - they enter at different angles but converge again at the exiting contact. When the SPM tip knocks an electron out of its orbit, an imaging signal is created. The ballistic motion of carriers in graphene opens the way for ballistic devices that manipulate beams of electrons and holes. Our collaborator Gil-Ho Lee, in Philip Kim's group, created a collimating contact by placing zig-zag absorbers on either side of entering electrons. Our cooled SPM was used to image the electron beam and determine its 9-degree halfwidth. By changing the gate voltage, a collimated beam of holes was also created, opening the way for colliding beam experiments. Coherent beams of carriers are desirable for quantum information processing. Via Andreev reflection, superconducting contacts can covert Cooper pairs in a superconductor to an ingoing and outgoing electrons and holes. Using our cooled SPM, Andreev reflection was imaged from a superconducting contact on a graphene device. Magnetic focusing was used to create an incoming beam of electrons and an outgoing beam of holes, detected by a third point contact. The images show a clear transition from normal reflection above the superconducting transition temperature to Andreev reflection as the device is cooled. Transition metal dichalcogenides offer a wide array of materials that can be exfoliated into ultrathin 2D sheets. A cooled SPM can be used to detect quantum dots as well as to image electron flow. The tip charge capacitively couples to electrons on the dot, acting as a gate to tune the dot conductance. Coulomb blockade peaks appear as a bullseye pattern in an SPM image as the tip is raster scanned above the dot. This approach was used to detect quantum dots in a MoS 2 channel as the carrier density was reduced and electrons pooled in low energy points. Through our DOE supported research, cooled SPM imaging has proven to be a very useful tool to uncover the motion of electrons and holes in the new quantum materials graphene and MoS 2 .