Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface steps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Efficient H{sub 2} production over Au/graphene/TiO{sub 2} induced by surface plasmon resonance of Au and band-gap excitation of TiO{sub 2}

Highlights: • Both surface plasmon resonance and band-gap excitation were used for H{sub 2} production. • Au/Gr/TiO{sub 2} composite photocatalyst was synthesized. • Au/Gr/TiO{sub 2} exhibited enhancement of light absorption and charge separation. • H{sub 2} production rate of Au/Gr/TiO{sub 2} was about 2 times as high as that of Au/TiO{sub 2}. - Abstract: H{sub 2} production over Au/Gr/TiO{sub 2} composite photocatalyst induced by surface plasmon resonance of Au and band-gap excitation of TiO{sub 2} using graphene (Gr) as an electron acceptor has been investigated. Electron paramagnetic resonance study indicated that, in this composite, Gr collected electrons not only from Au with surface plasmon resonance but also from TiO{sub 2} with band-gap excitation. Surface photovoltage and UV–vis absorption measurements revealed that compared with Au/TiO{sub 2}, Au/Gr/TiO{sub 2} displayed more effective photogenerated charge separation and higher optical absorption. Benefiting from these advantages, the H{sub 2} production rate of Au/Gr/TiO{sub 2} composite with Gr content of 1.0 wt% and Au content of 2.0 wt% was about 2 times as high as that of Au/TiO{sub 2}. This work represents an important step toward the efficient application of both surface plasmon resonance and band-gap excitation on the way to converting solar light into chemical energy.

36 MATERIALS SCIENCE↗

Computational screening of dopants for photocatalytic two-electron reduction of CO 2 on anatase (101) surfaces

We have carried out first-principles calculations to explore reaction mechanisms of the 2e reduction of CO 2 to HCOOH or CO in photochemical reactions catalyzed by anatase (101) surface. Two energetically competitive reaction pathways to HCOOH were identified, which involve initial 1e (via bidentate) and 2e (via monodentate) reduction steps, respectively. The pathways of producing CO were also explored. From the electronic structure analysis, we have shown the role of the anatase surface in facilitating electron and proton transfer in CO 2 reduction. Based on the determined rate-limiting step, we have carried out screening of substitutional surface cation doping and found metallic elements that could substantially lower the reaction barriers. Finally, a simple model describing the relationship between the activation barriers and the binding energies of CO 2 - to the dopant surface site is proposed.

Environmental Molecular Sciences Laboratory↗

Impact of boron on the step-free area formation on Si(111) mesa structures

We report about the influence of boron (B) on surface morphology of Si layers grown by molecular beam epitaxy on Si(111) mesas. Dimension of step-free mesa areas is reduced in comparison to pristine Si and scales with the B-coverage. This can be explained by a reduced mass transport on the Si surface in the presence of B-induced √3 × √3 surface structure which is due to a reduced Si equilibrium free adatom density. We demonstrate that a suitable combination of initial B coverage and Si layer thickness results in large step free areas and B doping concentration up to 4 × 10{sup 18 }cm{sup −3}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Variogram Identification Aided by a Structural Framework for Improved Geometric Modeling of Faulted Reservoirs: Jeffara Basin, Southeastern Tunisia

This article describes a proposed work-sequence to generate accurate reservoir-architecture models, describing the geometry of bounding surfaces (i.e., fault locations and extents), of a structurally complex geologic setting in the Jeffara Basin (South East Tunisia) by means of geostatistical modeling. This uses the variogram as the main tool to measure the spatial variability of the studied geologic medium before making any estimation or simulation. However, it is not always easy to fit complex experimental variograms to theoretical models. Thus, our primary purpose was to establish a relationship between the geology and the components of the variograms to fit a mathematically consistent and geologically interpretable variogram model for improved predictions of surface geometries. We used a three-step approach based on available well data and seismic information. First, we determined the structural framework: a seismo-tectonic data analysis was carried out, and we showed that the study area is cut mainly by NW-SE-trending normal faults, which were classified according to geometric criteria (strike, throw magnitude, dip, and dip direction). We showed that these normal faults are at the origin of a large-scale trend structure (surfaces tilted toward the north-east). At a smaller scale, the normal faults create a distinct compartmentalization of the reservoirs. Then, a model of the reservoir system architecture was built by geostatistical methods. An efficient methodology was developed, to estimate the bounding faulted surfaces of the reservoir units. Emphasis was placed on (i) elaborating a methodology for variogram interpretation and modeling, whereby the importance of each variogram component is assessed in terms of probably geologic factor controlling the behavior of each structure; (ii) integrating the relevant fault characteristics, which were deduced from the previous fault classification analysis, as constraints in the kriging estimation of bounding surfaces to best reflect the geologic structure of the study area. Finally, the estimated bounding surfaces together with seismic data and variogram interpretations were used to obtain further insights into the tectonic evolution of the study area that has induced the current reservoirs configuration.

58 GEOSCIENCES↗

Mechanism of oxygen reduction reaction on Pt(111) in alkaline solution: Importance of chemisorbed water on surface

Here, we report a detailed mechanistic study of the oxygen reduction reaction (ORR) on Pt(111) in alkaline solution, combining density functional theory and kinetic Monte Carlo simulations. A complex reaction network including four possible pathways via either 2e – or 4e – transfer is established and is able to reproduce the experimental measured polarization curve at both low- and high-potential regions. Our results show that it is essential to account for solvation by water and the dynamic coverage of *OH to describe the reaction kinetics well. In addition, a chemisorbed water (*H 2 O)-mediated mechanism including 4e – transfers is identified, where the reduction steps via *H 2 O on the surface are potential-independent and only the final removal of *OH from the surface in the form of OH – (aq) contributes to the current. For the ORR in alkaline solutions, such a mechanism is more competitive than the associative and dissociative mechanisms typically used to describe the ORR in acid solution. Finally, *OH and **O 2 intermediates are found to be critically important for tuning the ORR activity of Pt in alkaline solution. To enhance the activity, the binding of Pt should be tuned in such a way that *OH binding is weak enough to release more surface sites under working conditions, while **O 2 binding is strong enough to enable the ORR via the 4e – transfer mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A method for determining average damage depth of sawn crystalline silicon wafers

The depth of surface damage (or simply, damage) in crystalline silicon wafers, caused by wire sawing of ingots, is determined by performing a series of minority carrier lifetime (MCLT) measurements. Samples are sequentially etched to remove thin layers from each surface and MCLT is measured after each etch step. The thickness-removed (δt) at which the lifetime reaches a peak value corresponds to the damage depth. This technique also allows the damage to be quantified in terms of effective surface recombination velocity (S eff ). To accomplish this, the MCLT data are converted into an S eff vs δt plot, which represents a quantitative distribution of the degree of damage within the surface layer. We describe a wafer preparation procedure to attain reproducible etching and MCLT measurement results. We also describe important characteristics of an etchant used for controllably removing thin layers from the wafer surfaces. Lastly, some typical results showing changes in the MCLT vs δt plots for different cutting parameters are given.

14 SOLAR ENERGY↗

Investigation of the cesium activation of Ga⁢N photocathodes by low-energy electron microscopy

Low-energy electron microscopy (LEEM) was performed on p-Ga⁢N samples during in situ cesium deposition. LEEM images of electron reflectivity recorded as a function of the incident electron energy at different Cs coverages allowed to spatially resolve the evolution of the local work function (WF) during the activation process. While the average WF drops by more than 3 eV, the local WF remains quite uniform across the surface throughout the activation process. Maximum fluctuations of less than 0.2 eV were observed in the WF maps for Cs coverage of a fraction of a monolayer. These fluctuations are mainly related to the surface topography, in particular, to the atomic steps’ structure, which replicates the substrate miscut. Apart from these weak spatial fluctuations, no Cs clusters that would induce strong local WF contrast were observed at the scale of the 20-nm resolution of the measurements. These observations agree with the simple model of semiconductor activation to negative electron affinity that describes the formation of a dipole layer as responsible for the lowering of the WF. Additionally, at complete Cs coverage, the WF becomes fully homogeneous over the surface, smoothing out features originating from defects and topography.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synchrotron x-ray study of a low roughness and high efficiency K 2 CsSb photocathode during film growth

Reduction of roughness to the nm level is critical of achieving the ultimate performance from photocathodes used in high gradient fields. The thrust of this paper is to explore the evolution of roughness during sequential growth, and to show that deposition of multilayer structures consisting of very thin reacted layers results in an nm level smooth photocathode. Synchrotron x-ray methods were applied to study the multi-step growth process of a high efficiency K 2 CsSb photocathode. We observed a transition point of the Sb film grown on Si at the film thickness of similar to 40 angstrom with the substrate temperature at 100 degrees C and the growth rate at 0.1 Å s -1 . The final K 2 CsSb photocathode exhibits a thickness of around five times that of the total deposited Sb film regardless of how the Sb film was grown. The film surface roughening process occurs first at the step when K diffuses into the crystalline Sb. Furthermore, the photocathode we obtained from the multi-step growth exhibits roughness in an order of magnitude lower than the normal sequential process. X-ray diffraction measurements show that the material goes through two structural changes of the crystalline phase during formation, from crystalline Sb to K 3 Sb and finally to K 2 CsSb.

36 MATERIALS SCIENCE↗

Water Uptake by Silica Nanopores: Impacts of Surface Hydrophilicity and Pore Size

Water uptake at 298 K by two mesoporous silicas with different pore sizes was studied using volumetric vapor sorption. Here, through variation of sample pretreatment temperature and time, the number of surface hydroxyl groups was varied, leading to marked changes in the water sorption behavior. With increasing surface hydroxyl density, the adsorption of water to the pore surfaces increases, leading to formation of a thicker and denser water sorption layer. The BET model was used to measure surface hydroxyl density from low pressure parts of water adsorption isotherms. Adsorption of water molecules scales with the number density of surface hydroxyl groups, and monolayer coverage is reached at reduced pressure of ca. 0.3. The onset of adsorption pore condensation of water shifts to lower reduced pressure with increasing surface hydroxyl density, indicating growing thickness of adsorption layers. However, the water pore condensation step of the desorption branch shifts to smaller reduced pressure with increasing surface hydroxylation, reducing the adsorption-desorption hysteresis width. An adsorbed phase model is utilized to calculate the distribution of pore water molecules between adsorbed and pore condensation phases, and characterize the density and thickness of the water sorption phase. In the smaller pores, the adsorbed phase forms a sparse monolayer, while approximately a bilayer is formed in the wider pores. The previously reported silica nanopore underfilling by water is confirmed and rationalized by a significantly reduced water density in the adsorbed phase with respect to bulk, while the pore core is filled with water of approximately bulk density.

36 MATERIALS SCIENCE↗

Methanol Decomposition on Copper Surfaces under Ambient Conditions: Mechanism, Surface Kinetics, and Structure Sensitivity

Here, we study the adsorption of methanol vapor under ambient pressure and temperature conditions on low-index Cu surfaces using surface-sensitive infrared (IR) and X-ray spectroscopy techniques. The first step of methanol decomposition, i.e. , breaking of the O—H bond to form surface-bound methoxy, readily occurs under ambient conditions. Time-lapse IR spectra clearly indicate a gradually decreasing methoxy coverage, which does not obey well established kinetic models. We rationalize the initial temperature-independent, high, nonequilibrium coverage of methoxy by a H-bonded methanol assembly in the precursor state. A temperature-dependent equilibrium coverage is achieved as the excess methoxy is eliminated gradually via further dehydrogenation to CO that desorbs to the gas phase. The kinetics of this process displays a significant structure sensitivity with considerably faster kinetics on the Cu(110) surface compared to Cu(111) and Cu(100) surfaces.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Foil deposition onto an additive manufactured substrate

An additive manufacturing system and method for forming a part of dissimilar materials. The additive manufacturing system may include a build platform, a recoater for dispensing build powder onto the build platform, an energy source, a foil feed assembly, and a controller for controlling actuation of these components. The method of forming the part may include the steps of depositing a layer of build powder onto the build platform surface, melting selected portions of the layer of build powder, applying a sheet of foil over the layer of build powder, melting selected portions of the sheet of foil onto the layer of build powder, removing the sheet of foil from the layer of build powder, and then lowering the build platform surface to prepare for deposition of a next layer of the build powder. These steps are then repeated one or more times, thereby forming the part.

36 MATERIALS SCIENCE↗

Foil deposition onto an additive manufactured substrate

An additive manufacturing system and method for forming a part of dissimilar materials. The additive manufacturing system may include a build platform, a recoater for dispensing build powder onto the build platform, an energy source, a foil feed assembly, and a controller for controlling actuation of these components. The method of forming the part may include the steps of depositing a layer of build powder onto the build platform surface, melting selected portions of the layer of build powder, applying a sheet of foil over the layer of build powder, melting selected portions of the sheet of foil onto the layer of build powder, removing the sheet of foil from the layer of build powder, and then lowering the build platform surface to prepare for deposition of a next layer of the build powder. These steps are then repeated one or more times, thereby forming the part.

Green, Nicholas↗

Foil deposition onto an additive manufactured substrate

An additive manufacturing system and method for forming a part of dissimilar materials. The additive manufacturing system may include a build platform, a recoater for dispensing build powder onto the build platform, an energy source, a foil feed assembly, and a controller for controlling actuation of these components. The method of forming the part may include the steps of depositing a layer of build powder onto the build platform surface, melting selected portions of the layer of build powder, applying a sheet of foil over the layer of build powder, melting selected portions of the sheet of foil onto the layer of build powder, removing the sheet of foil from the layer of build powder, and then lowering the build platform surface to prepare for deposition of a next layer of the build powder. These steps are then repeated one or more times, thereby forming the part.

Green, Nicholas↗

Adsorbate-driven morphological changes on Cu(111) nano-pits

Adsorbate-driven morphological changes of pitted-Cu(111) surfaces have been investigated following the adsorption and desorption of CO and H. The morphology of the pitted-Cu(111) surfaces, prepared by Ar + sputtering, exposed a few atomic layers deep nested hexagonal pits of diameters from 8 to 38 nm with steep step bundles. The roughness of pitted-Cu(111) surfaces can be healed by heating to 450-500 K in vacuum. Adsorption of CO on the pitted-Cu(111) surface leads to two infrared peaks at 2089-2090 and 2101-2105 cm -1 for CO adsorbed on under-coordinated sites in addition to the peak at 2071 cm -1 for CO adsorbed on atop sites of the close-packed Cu(111) surface. CO adsorbed on under-coordinated sites is thermally more stable than that of atop Cu(111) sites. Annealing of the CO-covered surface from 100 to 300 K leads to minor changes of the surface morphology. In contrast, annealing of a H covered surface to 300 K creates a smooth Cu(111) surface as deduced from infrared data of adsorbed CO and scanning tunnelling microscopy (STM) imaging. The observation of significant adsorbate-driven morphological changes with H is attributed to its stronger modification of the Cu(111) surface by the formation of a sub-surface hydride with a hexagonal structure, which relaxes into the healed Cu(111) surface upon hydrogen desorption. These morphological changes occur ~150 K below the temperature required for healing of the pitted-Cu(111) surface by annealing in vacuum. In contrast, the adsorption of CO, which only interacts with the top-most Cu layer and desorbs by 160 K, does not significantly change the morphology of the pitted-Cu(111) surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The atomistic origin of the extraordinary oxygen reduction activity of Pt 3 Ni 7 fuel cell catalysts

Recently Debe et al. reported that Pt 3 Ni 7 leads to extraordinary Oxygen Reduction Reaction (ORR) activity. However, several reports show that hardly any Ni remains in the layers of the catalysts close to the surface (“Pt-skin effect”). This paradox that Ni is essential to the high catalytic activity with the peak ORR activity at Pt 3 Ni 7 while little or no Ni remains close to the surface is explained here using large-scale first-principles-based simulations. We make the radical assumption that processing Pt–Ni catalysts under ORR conditions would leach out all Ni accessible to the solvent. To simulate this process we use the ReaxFF reactive force field, starting with random alloy particles ranging from 50% Ni to 90% Ni and containing up to ~300 000 atoms, deleting the Ni atoms, and equilibrating the resulting structures. We find that the Pt 3 Ni 7 case and a final particle radius around 7.5 nm lead to internal voids in communication with the exterior, doubling the external surface footprint, in fair agreement with experiment. Then we examine the surface character of these nanoporous systems and find that a prominent feature in the surface of the de-alloyed particles is a rhombic structure involving 4 surface atoms which is crystalline-like but under-coordinated. Using density-functional theory, we calculate the energy barriers of ORR steps on Pt nanoporous catalysts, focusing on the O ad -hydration reaction (O ad + H 2 O ad → OH ad + OH ad ) but including the barriers of O 2 dissociation (O 2ad → O ad + O ad ) and water formation (OH ad + H ad → H 2 O ad ). We find that the reaction barrier for the O ad -hydration rate-determining-step is reduced significantly on the de-alloyed surface sites compared to Pt(111). Moreover we find that these active sites are prevalent on the surface of particles de-alloyed from a Pt–Ni 30 : 70 initial composition. These simulations explain the peak in surface reactivity at Pt 3 Ni 7 , and provide a rational guide to use for further optimization of improved catalytic and nanoporous materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lithium extraction composite for recovery of lithium from brines, and process of using said composition

A lithium extraction composite comprising: (i) a porous support and (ii) particles of a lithium-selective sorbent material coated on at least one surface of the support, wherein the support has a planar membrane, fiber (or rod), or tubular shape. A method for extracting and recovering a lithium salt from an aqueous solution by use of the above-described composition is also described, the method comprising (a) flowing the aqueous source solution through a first zone or over a first surface of the lithium extraction composite to result in selective lithium intercalation in the lithium-selective sorbent material in the first zone or first surface; and (b) simultaneously recovering lithium salt extracted in step (a) from said lithium-selective sorbent material by flowing an aqueous stripping solution through a second zone or over a second surface of the lithium extraction composite in which lithium ions from the first zone or first surface diffuse.

Bhave, Ramesh R.↗

Zinc treatment to enhance nickel electrode performance for liquid alkaline water electrolyzers

Raney Ni treatment is introduced to the surface of Ni mesh anode electrodes, enhancing liquid alkaline water electrolyzer performance. The surface of the Ni mesh is alloyed with Zn, deposited by either an aqueous infiltration of Zn salt or direct reaction with Zn foil. The extent of alloying is controlled by a heat treatment step. For both processes, fine porosity and enhanced surface area are obtained after leaching the Zn out of the surface alloy layer. The observed electrode surface structure and performance is quite sensitive to the thermal treatment temperature. The enhanced surface area improves full cell performance by 90 mV for infiltrated Zn treated at 600 °C and by 185 mV for Zn foil reacted at 425 °C (at 2 A cm −2 and 80 °C). In conclusion, the Zn treatment methods produce stable operating performance, exhibiting no decay after 150 h for the infiltrated Zn treated at 600 °C, and a decay rate of 4.6 μV h −1 over 100 h for the Zn foil reacted at 425 °C (at 1 A cm −2 and 80 °C).

LAWE↗

Using Minority Carrier Lifetime Measurement to Determine Saw Damage Characteristics on Si Wafer Surfaces

The damage on the Si wafer surfaces, caused by ingot cutting, is determined from measurement of minority carrier lifetime (..tau..eff). Samples are sequentially etched to remove thin layers from each surface and lifetime is measured after each etch step. The thickness-removed at which the lifetime reaches a peak value corresponds to the damage depth. This technique also allows the depth distribution of the damage to be quantified in terms of surface recombination velocity (SRV). An accurate measurement of ..tau..eff requires corrections to optical reflection, and transmission to account for changes in the surface morphology and in the wafer thickness.

14 SOLAR ENERGY↗