Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Steam‐Induced Coarsening of Single‐Unit‐Cell MFI Zeolite Nanosheets and Its Effect on External Surface Brønsted Acid Catalysis

Abstract Commonly used methods to assess crystallinity, micro‐/mesoporosity, Brønsted acid site density and distribution (in micro‐ vs. mesopores), and catalytic activity suggest nearly invariant structure and function for aluminosilicate zeolite MFI two‐dimensional nanosheets before and after superheated steam treatment. Yet, pronounced reaction rate decrease for benzyl alcohol alkylation with mesitylene, a reaction that cannot take place in the zeolite micropores, is observed. Transmission electron microscopy images reveal pronounced changes in nanosheet thickness, aspect ratio and roughness indicating that nanosheet coarsening and the associated changes in the external (mesoporous) surface structure are responsible for the changes in the external surface catalytic activity. Superheated steam treatment of hierarchical zeolites can be used to alter nanosheet morphology and regulate external surface catalytic activity while preserving micro‐ and mesoporosity, and micropore reaction rates.

Guefrachi, Yasmine↗
DOE OSTI2021

Adhesive Bonding of Copper Prepared by Laser-Interference near the Interference Structuring Limits

Adhesive bonding requires adequate surface preparation for ensuring an appropriate joint quality. The interest in adhesive joining has recently expanded to thermal systems having a large number of joints employed for manufacturing and assembly. This study presents surface topology of copper 110 produced by a laser-interference setup that would theoretically yield a periodicity of 1.7 μm, which is near the 1.6–2 μm structuring limit that was estimated based on thermal diffusion length scale for an 8 ns laser pulse. The results show that although the expected periodic interference structuring was not attained, the melt-induced texturing was affected by the laser-interference profile. Single-lap shear tests were performed with specimen surfaces prepared by traditional abrasion and laser-interference structuring methods. Several laser processing parameters, such as the laser spot size, density, number of pulses, and raster speed, were studied. Scanning electron microscope and profilometry measurements were used to characterize the processed surface microstructures. Web-like structures, which indicate widespread melting, were shown to be formed at different processing conditions. Based on the surface topologies investigated, two laser raster speeds were selected to make single-lap-joint specimens. Baseline joints were prepared by abrading joining specimens. The shear-lap strength and displacement at maximum load were shown to be higher by 16.8% and 43.8% for the laser-structured specimens than those of the baseline specimens, respectively. Moreover, the load-displacement curves indicated that the laser-structured joints were more ductile than those without laser-structuring. The increased ductility for the laser-structured joints was found to yield an increase in the energy absorbed during shear-lap testing of approximately of 80–90% over those measured for baseline joints. It is another indicator that laser-interference structuring enhanced the bonding performance of single-lap shear joints.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Bottlebrush Polymers at Liquid Interfaces: Assembly Dynamics, Mechanical Properties, and All-Liquid Printed Constructs

Bottlebrush polymer surfactants (BPSs), formed by the interfacial interactions between bottlebrush polymers (BPs) with poly(acrylic acid) side chains dissolved in an aqueous phase and amine-functionalized ligands dissolved in the oil phase, assemble and bind strongly to the fluid-fluid interface. The ratio between N BB (backbone degree of polymerization) and N SC (side chain degree of polymerization) defines the initial assembly kinetics, interface packing efficiency, and stress relaxation. The equilibrium interfacial tension (γ) increases when N BB < N SC , but decreases when N BB $\gg$ N SC , correlating to a pronounced change in the effective shape of the BPs from being spherical to worm-like structures. The apparent surface coverage (ASC), i.e., the interfacial packing efficiency, decreases as N BB increases. The dripping-to-jetting transition of an injected polymer solution, as well as fluorescence recovery after photobleaching experiments, revealed faster initial assembly kinetics for BPs with higher N BB . Furhter, Euler buckling of BPS assemblies with different N BB values was used to characterize the stress relaxation behavior and bending modulus. The stress relaxation behavior was directly related to the ASC, reflecting the strong influence of macromolecular shape on packing efficiency. The bending modulus of BPSs decreases for N BB < N SC , but increased when N BB $\gg$ N SC , showing the effect of molecular architecture and multisite anchoring. All-liquid printed constructs with lower N BB BPs yielded more stable structured liquids, underscoring the importance of macromolecular packing efficiency at fluid interfaces. Overall, this work elucidates fundamental relationships between nanoscopic structures and macroscopic properties associated with various bottlebrush polymer architectures, which translate to the stabilization of all-fluidic printed constructs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hydration structure and water exchange kinetics at xenotime–water interfaces: implications for rare earth minerals separation

Hydration of surface ions gives rise to structural heterogeneity and variable exchange kinetics of water at complex mineral–water interfaces. In this work, we employ ab initio molecular dynamics (AIMD) simulations and water adsorption calorimetry to examine the aqueous interfaces of xenotime, a phosphate mineral that contains predominantly Y 3+ and heavy rare earth elements. Consistent with natural crystal morphology, xenotime is predicted to have a tetragonal prismatic shape, dominated by the {100} surface. Hydration of this surface induces multilayer interfacial water structures with distinct OH orientations, which agrees with recent crystal truncation rod measurements. The exchange kinetics between two adjacent water layers exhibits a wide range of underlying timescales (5–180 picoseconds), dictated by ion–water electrostatics. Adsorption of a bidentate hydroxamate ligand reveals that {100} xenotime surface can only accommodate monodentate coordination with water exchange kinetics strongly depending on specific ligand orientation, prompting us to reconsider traditional strategies for selective separation of rare-earth minerals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Characterization of ultrafast-laser ablation of micro-structures in Li-ion battery anode and cathode materials: Morphology, rate, and efficiency

Characterization of the rate and quality of ultrafast-laser ablation of Li-ion battery (LIB) electrode materials is presented for a collection of common and next-generation electrodes. Laser ablated micro-structures on the surface of LIB electrodes have been shown to provide dramatic enhancement of high-rate capability and electrode wetting. However, industrial adoption is hampered by a lack of data enabling informed choice of laser parameters and predicting process throughput. Here this work bridges this gap by providing characterization of the ablation process at more laser parameters (laser fluence and number of pulses used) than are currently available in the literature. Further, we expand on previous graphite and lithium iron phosphate (LFP) ablation work by extending ablation characterization to new LIB materials, providing high data resolution and adopting new characterization metrics which are relevant for industrial application of this technology. Ablated pores are characterized by their ablated depth, volume, and how the depth and volume ablation rate changes as a function of pore depth. Finally, we provide a detailed characterization of the morphology of laser ablated micro-structures which informs how material and laser parameters affect the quality of laser-processed electrodes.

25 ENERGY STORAGE↗
DOE OSTI2022

Prospects for future studies using deep imaging: analysis of individual Galactic cirrus filaments

The presence of Galactic cirrus is an obstacle for studying both faint objects in our Galaxy and low surface brightness extragalactic structures. With the aim of studying individual cirrus filaments in Sloan Digital Sky Survey (SDSS) Stripe 82 data, we develop techniques based on machine learning and neural networks that allow one to isolate filaments from foreground and background sources in the entirety of Stripe 82 with a precision similar to that of the human expert. Our photometric study of individual filaments indicates that only those brighter than 26 mag arcsec −2 in the SDSS r band are likely to be identified in SDSS Stripe 82 data by their distinctive colours in the optical bands. We also show a significant impact of data processing (e.g. flat-fielding, masking of bright stars, and sky subtraction) on colour estimation. Analysing the distribution of filaments’ colours with the help of mock simulations, we conclude that most filaments have colours in the following ranges: 0.55 ≤g − r ≤ 0.73 and 0.01 ≤ r − i ≤ 0.33. Our work provides a useful framework for an analysis of all types of low surface brightness features (cirri, tidal tails, stellar streams, etc.) in existing and future deep optical surveys. For practical purposes, we provide the catalogue of dust filaments.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Electronic structure of non-centrosymmetric PtBi2 studied by angle-resolved photoemission spectroscopy

Using high-resolution angle-resolved photoemission spectroscopy (ARPES), we have systematically studied the electronic structure of non-centrosymmetric PtBi2 with a layered structure. Through photon energy dependent measurements, the surface state and the bulk state were identified. Consistent with the non-centrosymmetric structure, different surface states were observed on opposite PtBi2(001) surfaces. Experimental bulk bands agree nicely with first-principle calculations. By combining ARPES and calculations, energy bands that contribute to triply degenerate point fermion were all detected. We also suggest that there are “canted” tube-like Fermi surfaces that might cause strong anisotropy in electronic transportation in non-centrosymmetric PtBi2.

Jiang, Wenxiang (ORCID:000000020524259X)↗
DOE OSTI2022

A deep learning approach for semantic segmentation of unbalanced data in electron tomography of catalytic materials

In computed TEM tomography, image segmentation represents one of the most basic tasks with implications not only for 3D volume visualization, but more importantly for quantitative 3D analysis. In case of large and complex 3D data sets, segmentation can be an extremely difficult and laborious task, and thus has been one of the biggest hurdles for comprehensive 3D analysis. Heterogeneous catalysts have complex surface and bulk structures, and often sparse distribution of catalytic particles with relatively poor intrinsic contrast, which possess a unique challenge for image segmentation, including the current state-of-the-art deep learning methods. To tackle this problem, we apply a deep learning-based approach for the multi-class semantic segmentation of a γ-Alumina/Pt catalytic material in a class imbalance situation. Specifically, we used the weighted focal loss as a loss function and attached it to the U-Net’s fully convolutional network architecture. We assessed the accuracy of our results using Dice similarity coefficient (DSC), recall, precision, and Hausdorff distance (HD) metrics on the overlap between the ground-truth and predicted segmentations. Our adopted U-Net model with the weighted focal loss function achieved an average DSC score of 0.96 ± 0.003 in the γ-Alumina support material and 0.84 ± 0.03 in the Pt NPs segmentation tasks. We report an average boundary-overlap error of less than 2 nm at the 90th percentile of HD for γ-Alumina and Pt NPs segmentations. The complex surface morphology of γ-Alumina and its relation to the Pt NPs were visualized in 3D by the deep learning-assisted automatic segmentation of a large data set of high-angle annular dark-field (HAADF) scanning transmission electron microscopy (STEM) tomography reconstructions.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Dye Nanoaggregate Structures in MK-2, N3, and N749 Dye···TiO 2 Interfaces That Represent Dye-Sensitized Solar Cell Working Electrodes

The working electrode of a dye-sensitized solar cell (DSSC) consists of dye molecules adsorbed onto nanoparticles of a semiconductor such as TiO 2 . A reliable prediction of the DSSC photovoltaic performance of a given dye requires in-depth knowledge about the precise structure of the dye···TiO 2 interface. In this work, X-ray reflectometry (XRR) and grazing-incidence small-angle X-ray scattering (GISAXS) are employed to determine the dye···TiO 2 interfacial structure and associated dye aggregation behavior of three high-performance DSSC dyes, i.e., a metal-free organic dye, MK-2, and the two archetypal ruthenium-based organometallic dyes, N3 and N749 (Black Dye). Results show that all three dyes form nanoaggregates in dye···TiO 2 interfaces. We determine the dye nanoaggregate separations, sizes, distribution densities, and the extent of short-range order within each dye self-assembly in the longitudinal and lateral directions. Dye···TiO 2 composites fabricated using dye solutions of varying concentrations are analyzed. We find that nanoaggregates of the three dyes are separated by several hundred nanometers (158-203 nm) in dye···TiO 2 interfaces that have been fabricated using concentrated dye solutions (0.5 mM or 1.0 mM). MK-2 and N749 dyes also display smaller interparticle separations. Dye nanoparticle diameters are of the order of 156-198 nm, sizes that are comparable to the largest interparticle separations. Thus, no extraneous dye particles can be fitted into gaps between particles, so the dye self-assembly is saturated. Self-assemblies of all three dyes exhibit both lateral and longitudinal short-range order; N3 displays a particularly short coherence length along the TiO 2 surface, with extensive structured disorder along the longitudinal direction. The operation of DSSC working electrodes would therefore seem to be dependent on a dye self-assembly that may exhibit several levels of structural granularity and dye aggregation effects.

14 SOLAR ENERGY↗
DOE OSTI2023

Fate of arsenic during the interactions between Mn-substituted goethite and dissolved Fe(II)

Geogenic arsenic has become a globally-distributed groundwater contaminant, liberated from the weathering of arsenic-bearing sulfide minerals and often transported to aquifer sediments adsorbed to iron oxides. Among the iron oxides, goethite (α-FeOOH) is uniquely important for the fate of arsenic because of its widespread abundance, stability, and high affinity for binding arsenic. Goethite is ubiquitous in soils and sediments and often contains substituted elements, including manganese. Structural manganese may affect the surface reactivity and redox capacity of goethite and alter the mechanisms of recrystallization catalyzed by dissolved Fe(II), potentially affecting arsenic adsorption. Here, this study examined the fate of As(V) during the interactions between dissolved Fe(II) and Mn-substituted goethites at pH 4 and 7 as well as associated changes in arsenic speciation. At pH 7, the addition of dissolved Fe(II) initially increases the adsorption of As(V) onto Mn-bearing and Mn-free goethites. For the Mn-substituted goethites, the adsorbed As(V) slowly releases to solution at longer aging times. Fe(II) addition at pH 4 slightly increases As(V) uptake by Mn-substituted goethites, with differences in total sorption correlating with the Mn content in goethite. The addition of Fe(II) releases substantial dissolved manganese but the amount solubilized is higher at pH 4 compared to 7, suggesting that the presence of adsorbed As(V) may substantially promote the Mn release at pH 4. X-ray absorption fine structure spectroscopy shows that arsenic is stabilized as As(V) in all the samples and adsorbed on goethite via a bidentate binuclear mechanism. Fitting results show that the binding distance and coordination numbers are stable in Mn-free goethite and Mn-substituted goethite samples; the effect of substituted Mn on the surface complex structure is minor. High resolution transmission electron microscopy and X-ray diffraction confirm that no secondary ferrous arsenate minerals precipitate under both pH conditions. This study improves our understanding of the Fe(II)-As(V) interactions on iron oxides, and demonstrates that the substituted cations such as manganese may quantitatively alter the geochemical fate of arsenic during the reaction of dissolved Fe(II) with Fe(III) oxides.

58 GEOSCIENCES↗
DOE OSTI2020

Exploring topography-based methods for downscaling subgrid precipitation for use in Earth System Models

Topography exerts major control on land surface processes. To improve representation of topographic impacts on land surface processes, a new topography-based subgrid structure has been introduced to the Energy Exascale Earth System Model to represent the subgrid heterogeneity of surface elevation. To take advantage of the new subgrid structure for improving land surface modeling, this study explores four variations of topography-based methods for downscaling grid precipitation to the corresponding subgrids. In the first three methods, the deviation of the subgrid precipitation from the grid’s is equal to the grid precipitation multiplied by the ratio of the elevation difference between the subgrid and grid mean to a specified elevation equals to the grid elevation, the difference between the maximum and minimum subgrid elevation, and the maximum subgrid elevation, respectively. The second method limits the ratio to 0.5 to avoid extreme values on mountains and the third method accounts for the slope effect. The fourth method is similar to the third method except that the Froude Number is used to limit the numerator in a blocking regime of the ambient flow. The downscaled precipitation is evaluated using the PRISM precipitation data over the U.S. using statistical metrics. Results show that by accounting for topographic slope besides elevation, the third and fourth methods show clear advantages over the first and second methods. Furthermore, introducing the Froude Number in the fourth method improves downscaling skill and shows consistent advantages over the third method in areas with larger subgrid heterogeneity across different grids sizes.

Tesfa, Teklu K.↗
DOE OSTI2024

Deconstructing the High Voltage Degradation Mechanisms in Na 2/3 Ni 1/3 Mn 2/3 O 2 with Single Crystals and Advanced Electrolyte

Abstract Sodium layered oxide cathodes can uniquely benefit from the existing lithium‐ion battery industry as sodium‐ion batteries gain traction as a potential low‐cost, drop‐in replacement. However, achieving relevant energy density with a suitable cycle life remains a challenge for sodium layered oxides. At high operating potentials, several competing degradation mechanisms prevent P2‐type Na 2/3 Ni 1/3 Mn 2/3 O 2 (≈550 Wh kg −1 ) from achieving meaningful cycle life—with bulk structural instability and surface reactivity being the primary retractors. Herein, the issue of particle cracking is addressed through detailed synthesis methods of “single‐crystal” materials. By comparison to a polycrystalline baseline, the single‐crystal materials quantify the capacity loss due to isolation of active material caused by intergranular particle cracking. The single crystal materials are then employed in cells with an advanced, “localized saturated electrolyte” (LSE) to demonstrate the magnitude of capacity loss due to electrolyte decomposition at the cathode surface. Mitigation of the surface reactivity through the LSE electrolyte effectively demonstrates the elevated importance of surface reactivity at high voltages despite the onset of egregious particle cracking. This work aims to guide future research into understanding molten‐salt assisted syntheses and advance the debate on surface versus bulk degradation.

Darga, Joe↗
DOE OSTI2020

Revisiting the Role of Conductivity and Polarity of Host Materials for Long-Life Lithium–Sulfur Battery

Despite their high theoretical energy density and low cost, lithium-sulfur batteries (LSBs) suffer from poor cycle life and low energy efficiency owing to the polysulfides shuttle and the electronic insulating nature of sulfur. Conductivity and polarity are two critical parameters for the search of optimal sulfur host materials. However, their role in immobilizing polysulfides and enhancing redox kinetics for long-life LSBs are not fully understood. In this work we have conducted an evaluation on the role of polarity over conductivity by using a polar but nonconductive platelet ordered mesoporous silica (pOMS) and its replica platelet ordered mesoporous carbon (pOMC), which is conductive but nonpolar. It is found that the polar pOMS/S cathode with a sulfur mass fraction of 80 wt% demonstrates outstanding long-term cycle stability for 2000 cycles even at a high current density of 2C. Furthermore, the pOMS/S cathode with a high sulfur loading of 6.5 mg cm -2 illustrates high areal and volumetric capacities with high capacity retention. Complementary physical and electrochemical probes clearly show that surface polarity and structure are more dominant factors for sulfur utilization efficiency and long-life, while the conductivity can be compensated by the conductive agent involved as a required electrode material during electrode preparation. The present findings shed new light on the design principles of sulfur hosts towards long-life and highly efficient LSBs.

25 ENERGY STORAGE↗
DOE OSTI2023

3D-Printed Graded Electrode with Ultrahigh MnO 2 Loading for Non-Aqueous Electrochemical Energy Storage

Electrolytic manganese dioxide is one of the promising cathode candidates for electrochemical energy storage devices due to its high redox capacity and ease of synthesis. Yet, high-loading MnO 2 often suffers from sluggish reaction kinetics, especially in non-aqueous electrolytes. The non-uniform deposition of MnO 2 on a porous current collectors also makes it difficult to fully utilize the active materials at high mass loading. Here, a 3D printed graded graphene aerogel (3D GA) that contains sparsely separated exterior ligaments is developed to create large open channels for mass transport as well as densely arranged interior ligaments providing large ion-accessible active surface. The unique structural design homogenizes the thickness of electro deposited MnO 2 even at an ultrahigh mass loading of ≈70 mg cm -2 . The electrode achieves a remarkable volumetric capacity of 29.1 mA h cm -3 in the non-aqueous electrolyte. A Li-ion hybrid capacitor device assembled with a graded 3D GA/MnO2 cathode and graded 3D GA/VO x anode exhibits a wide voltage window of 0–4 V and a superior volumetric energy density of 20.2 W h L -1 . The findings offer guidance on 3D printed electrode design for supporting ultrahigh loading of active materials and developments of high energy density energy storage devices.

electrochemical energy storage↗
DOE OSTI2020

A Surface‐Strained and Geometry‐Tailored Nanoreactor that Promotes Ammonia Electrosynthesis

Abstract A surface‐strained and geometry‐optimized TiO 2 nanoreactor enhances the performance of electrocatalytic nitrogen fixation. The nanotubular confinement allows spatial regulation of the mass transport of nitrogen during the NRR process and offers an enlarged surface area, thus boosting the ammonia production with high selectivity. Both experimental and theoretical evidence support strained Ti 3+ sites, demonstrating a more favorable pathway for the N 2 activation and selective NH 3 production with a faster kinetic rate than the pristine TiO 2 . The TiO 2 ‐based nanoreactor with surface and bulk structure tailoring delivered an NH 3 yield rate up to 5.50 μg h −1 cm −2 (16.67 μg h −1 mg cat −1 ) and high faradaic efficiency of 26 % under ambient aqueous conditions. Our findings highlight the concept of lattice strain and geometry modified nanoreactors, which will have broad implications in the renewable energy catalysis and electrosynthesis of valuable products.

Li, Panpan↗
DOE OSTI2022

A General Route to Flame Aerosol Synthesis and In Situ Functionalization of Mesoporous Silica

Abstract Mesoporous silica is a versatile material for energy, environmental, and medical applications. Here, for the first time, we report a flame aerosol synthesis method for a class of mesoporous silica with hollow structure and specific surface area exceeding 1000 m 2 g −1 . We show its superior performance in water purification, as a drug carrier, and in thermal insulation. Moreover, we propose a general route to produce mesoporous nanoshell‐supported nanocatalysts by in situ decoration with active nanoclusters, including noble metal (Pt/SiO 2 ), transition metal (Ni/SiO 2 ), metal oxide (CrO 3 /SiO 2 ), and alumina support (Co/Al 2 O 3 ). As a prototypical application, we perform dry reforming of methane using Ni/SiO 2 , achieving constant 97 % CH 4 and CO 2 conversions for more than 200 hours, dramatically outperforming an MCM‐41 supported Ni catalyst. This work provides a scalable strategy to produce mesoporous nanoshells and proposes an in situ functionalization mechanism to design and produce flexible catalysts for many reactions.

Liu, Shuo↗
DOE OSTI2020

A Surface-Strained and Geometry-Tailored Nanoreactor that Promotes Ammonia Electrosynthesis

A surface-strained and geometry-optimized TiO 2 nanoreactor enhances the performance of electrocatalytic nitrogen fixation. The nanotubular confinement allows spatial regulation of the mass transport of nitrogen during the NRR process and offers an enlarged surface area, thus boosting the ammonia production with high selectivity. Both experimental and theoretical evidence support strained Ti 3+ sites, demonstrating a more favorable pathway for the N 2 activation and selective NH 3 production with a faster kinetic rate than the pristine TiO 2 . The TiO 2 -based nanoreactor with surface and bulk structure tailoring delivered an NH 3 yield rate up to 5.50 μg h -1 cm -2 (16.67 μg h -1 mg cat -1 ) and high faradaic efficiency of 26 % under ambient aqueous conditions. Furthermore, our findings highlight the concept of lattice strain and geometry modified nanoreactors, which will have broad implications in the renewable energy catalysis and electrosynthesis of valuable products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗