SEARCH · Search NASA

Results for “system specification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Reference frame requirements and the MERIT campaign

An analysis is given of how satellite, lunar laser, and very long base interferometry stations available during the MERIT Campaign in 1983/84 can contribute to the detection of short periodic variations in the rotational parameters of the earth, as well as the determination of the differences between the various Conventional Terrestrial and Inertial Reference Frames inherent in the above systems. Specific observational requirements are given both by objective and by country.

Mueller, I. I.↗

NASA NTRS1984

LANDSAT-4 MSS Geometric Correction: Methods and Results

An automated image registration system such as that developed for LANDSAT-4 can produce all of the information needed to verify and calibrate the software and to evaluate system performance. The on-line MSS archive generation process which upgrades systematic correction data to geodetic correction data is described as well as the control point library build subsystem which generates control point chips and support data for on-line upgrade of correction data. The system performance was evaluated for both temporal and geodetic registration. For temporal registration, 90% errors were computed to be .36 IFOV (instantaneous field of view) = 82.7 meters) cross track, and .29 IFOV along track. Also, for actual production runs monitored, the 90% errors were .29 IFOV cross track and .25 IFOV along track. The system specification is .3 IFOV, 90% of the time, both cross and along track. For geodetic registration performance, the model bias was measured by designating control points in the geodetically corrected imagery.

Brooks, J.↗

NASA NTRS1983

Reducing the turnaround time for the Shuttle Orbiter main propulsion system at Kennedy Space Center

This paper presents steps currently being implemented to reduce the processing time of the Orbiter Main Propulsion System. Given the projected increase in launch rates of the Space Transportation System (STS) in the operational era, average turnaround time from arrival at Kennedy Space Center to subsequent launch will have to be significantly reduced. In many STS flows to date, a pacing system has been the Main Propulsion System consisting of the three Space Shuttle Main Engines (SSME's) and the Main Propulsion Subsystem (MPS) connecting the SSME's to the Orbiter/ground and Orbiter/External Tank interfaces. This paper summarizes procedural, hardware, software, and requirements changes being incorporated at Kennedy Space Center (KSC) to reduce the processing time required for the MPS/SSME systems. Specific examples from each category are cited to illustrate the impact of the improvements on MPS/SSME processing.

Bilardo, V. J., Jr.↗

NASA NTRS1983

Energetic closed-cycle gas core reactors for orbit raising

Closed-cycle gas core reactor power plants can be of two types. In the 'mixed flow' type, the gaseous nuclear fuel is intimately mixed with the working gas in the cavity. In the 'light bulb' type the fissioning plasma is enclosed in a transparent tube, and energy transfer to the separate working gas occurs by thermal radiation. The potentials of high temperature gas core reactors in terrestrial electric power generator applications have been considered, and a number of civilian power-beaming applications for gaseous fuel nuclear-MHD power plants in space have been suggested. Major conclusions of investigations related to the design of space power systems are discussed. Attention is given to options for conversion cycles, the power system specific mass, and research and technology issues.

Rosa, R. J.↗

NASA NTRS1984

Centaur D-1A guidance/software system

The main body of this paper describes the evolution of the Centaur D-1A Guidance and Software System. Specifically, the performance of the explicit guidance equations, using a linear tangent steering law. Inherent flexibility exists in the equations in that they have multimission capability. They can accommodate both earth-orbital and earth-escape missions with either one or two Centaur burns. They can also guide for multi-burn orbital missions. The Centaur performance is indicated in terms of optimality (propellant usage), accuracy, flexibility and computer requirements. In the course of the Centaur Guidance development substantial changes and improvements have been made and more improvements are on the way for the Shuttle/Centaur Guidance. It is the intent of this paper to describe, provide insight into, and identify certain unique aspects of the individual Centaur flight profiles. Mission profile(s) are described narratively with some numerical data given in cases where it may be useful.

Gordan, A. L.↗

NASA NTRS1985

Spatial Resolution Estimation of LANDSAT-4 Thematic Mapper Data

The problem of estimating the overall point-spread function (PSF) of multispectral scanner systems was studied using real scene data and known geometric structures in the scene. A direct solution to an approximate form of the PSF was made along with a method using the derivative of an estimated edge response. Both results agreed closely. The TM scanner system specifications are given in line-spread function width and these values are listed with the experimental results in terms of meters. The estimated values are very reasonable, considering the number of factors which could be influencing the result. The atmosphere will have a blurring effect on the overall PSF as well as on cubic convolution resampling effects and possible electronic effects not accounted for in the specification. Also, the specific definition of the LSF specification is not known nor is the actual altitude at the instant the data were acquired. Thus the nominal overall PSF half-amplitude width of 39 m is reasonable; however, a greater sample of scene objects should be evaluated to furthur verify this result.

Mcgillem, C. D.↗

NASA NTRS1984

Ion propulsion for communications satellites

In a recent study of potential applications for electric propulsion, it was determined that ion propulsion can provide North-South stationkeeping (NSSK) for communication satellites in geosynchronous orbit with appreciably less mass than chemical propulsion. While this finding is not new, the margin of benefit over advanced chemical propulsion technology depends strongly on the ion propulsion system specifications. Full advantage must be taken of the under-utilized stored energy available from the communication satellite's batteries. This paper describes a methodology for evaluating the benefits obtained in using ion propulsion for NSSK, both in terms of the mass reduction and its economic value.

Poeschel, R. L.↗

NASA NTRS1983

System design parameter study for Shuttle Infrared Telescope Facility (SIRTF)

SIRTF is a high-sensitivity, cooled astronomical telescope operating from 2 to 1000 microns. The techniques used in analyzing the sensitivity of the SIRTF system performance to several technical issues are presented. Lowering the telescope temperature to near 4K is found to produce margin in several areas. A refined observing requirements model relieves the hardware performance requirements, and identifies extended source size/observing strategy as an important system specification. Other major conclusions are presented.

Mord, A. J.↗

NASA NTRS1986

1985 Nuclear Science Symposium, 32nd, and 1985 Symposium on Nuclear Power Systems, 17th, San Francisco, CA, October 23-25, 1985, Proceedings

The present conference ranges over topics in high energy physics instrumentation, detectors, nuclear medical applications, health physics and environmental monitoring, reactor instrumentation, nuclear spacecraft instrumentation, the 'Fastbus' data acquisition system, circuits and systems for nuclear research facilities, and the development status of nuclear power systems. Specific attention is given to CCD high precision detectors, a drift chamber preamplifier, a Cerenkov ring imaging detector, novel scintillation glasses and scintillating fibers, a modular multidrift vertex detector, radial wire drift chambers, liquid argon polarimeters, a multianode photomultiplier, the reliability of planar silicon detectors, the design and manufacture of wedge and strip anodes, ultrafast triode photodetectors, photomultiplier tubes, a barium fluoride plastic scintillator, a fine grained neutron hodoscope, the stability of low leakage silicon photodiodes for crystal calorimeters, and X-ray proportional counters. Also considered are positron emission tomography, single photon emission computed tomography, nuclear magnetic resonance imaging, Geiger-Muller detectors, nuclear plant safeguards, a 32-bit Fastbus computer, an advanced light water reactor, and nuclear plant maintenance.

Source record↗

NASA NTRS1985

Evolution of rotationally and tidally distorted low-mass, close binary systems - Implications for the minimum orbital period of cataclysmic variables

A (1 + 0.4) solar mass close binary system consisting of a compact primary and a red dwarf secondary has been evolved numerically. Such a binary system should effectively model cataclysmic variables for which a minimum orbital period cutoff of about 81 minutes has been observed. The influence of gravitational radiation losses which drive Roche lobe overflow has been studied, and the effects of rotational and tidal distortion have also been incorporated in the calculation. The evolution of the He-3 abundance, which has been suggested as a possible explanation for the upper limit of the apparent orbital period gap exhibited by cataclysmic variables, is also considered. It is found that both the distortional effects and the He-3 chemical profile can play an important role in determining the subsequent evolution of these systems. Specifically, when distortion is included, the theoretical minimum orbital period is increased by about 10 percent, yielding better agreement with observations.

Nelson, L. A.↗

NASA NTRS1986

Long range inhabited surface transportation system power source for the exploration of Mars (manned Mars mission)

A hydrogen-oxygen fuel cell system is identified as a viable power source for a long range inhabited surface transportation system for the exploration of Mars. Power system weights and power requirements are determined as a function of vehicle weight. For vehicles weighing from 2700 to 7300 kg in LEO, the total power system weight ranges from 1140 to 1860 kg, with the reactants and energy conversion hardware (fuel cells, reactant storage, and radiator) weighing 430 to 555 kg and 610 to 1110 kg, respectively. Vehicle power requirements range from 45 kW for a 2700 kg vehicle to 110 kW for a 7300 kg vehicle. Power system specific weights and power profiles for housekeeping and the operation of scientific equipment such as coring drills and power tools are also specified.

Lisa Kohout↗

NASA NTRS1987

Approximating the linear quadratic optimal control law for hereditary systems with delays in the control

The fundamental control synthesis issue of establishing a priori convergence rates of approximation schemes for feedback controllers for a class of distributed parameter systems is addressed within the context of hereditary systems. Specifically, a factorization approach is presented for deriving approximations to the optimal feedback gains for the linear regulator-quadratic cost problem associated with time-varying functional differential equations with control delays. The approach is based on a discretization of the state penalty which leads to a simple structure for the feedback control law. General properties of the Volterra factors of Hilbert-Schmidt operators are then used to obtain convergence results for the controls, trajectories and feedback kernels. Two algorithms are derived from the basic approximation scheme, including a fast algorithm, in the time-invariant case. A numerical example is also considered.

Milman, Mark H.↗

NASA NTRS1987

Low frequency vibrational stirring - A new method for rapidly mixing solutions and melts during growth

A new method for rapidly stirring liquids has been developed which may be useful in crystal growth applications. The method involves the introduction of orthogonally coupled low frequency vibrations to fluids contained in cylindrical crucibles. A mathematical model has been developed to describe the influence of this vibrational stirring method on fluid flow. The optimum sloshing frequencies calculated for a specific system geometry were very close to those observed experimentally. A systematic study of the fluid flow induced by the vibrational motion was carried out at room temperature using aqueous solutions containing glycerine. Preliminary experiments were carried out to study the effect of vibrational stirring on interface shape and position during the Bridgman growth of CsCdCl3, a model system.

Liu, W.-S.↗

NASA NTRS1985

Automation of analytical isotachophoresis

The basic features of automation of analytical isotachophoresis (ITP) are reviewed. Experimental setups consisting of narrow bore tubes which are self-stabilized against thermal convection are considered. Sample detection in free solution is discussed, listing the detector systems presently used or expected to be of potential use in the near future. The combination of a universal detector measuring the evolution of ITP zone structures with detector systems specific to desired components is proposed as a concept of an automated chemical analyzer based on ITP. Possible miniaturization of such an instrument by means of microlithographic techniques is discussed.

Thormann, Wolfgang↗

NASA NTRS1987

Spinoff, 1987

Various current or forthcoming NASA projects and experiments with potential for technology spinoff are described. NASA technological advances with existing commercial applications are outlined in the following areas: transportation; consumer; home; and recreation; medicine; resources management; energy; public safety; and manufacturing technology and industrial productivity. Specific systems, devices, and equipment are described. A concluding essay describes the NASA technology utilization/transfer effort.

Haggerty, James J.↗

NASA NTRS1987

Space station integrated propulsion and fluid system study: Fluid systems configuration databook

This databook contains fluid system requirements and system descriptions for Space Station program elements including the United States and International modules, integrated fluid systems, attached payloads, fluid servicers and vehicle accommodation facilities. Separate sections are devoted to each of the program elements and include a discussion of the overall system requirements, specific fluid systems requirements and systems descriptions. The systems descriptions contain configurations, fluid inventory data and component lists. In addition, a list of information sources is referenced at the end of each section.

Rose, L.↗

NASA NTRS1988

Contamination of optical surfaces

The effect of molecular contamination on Space Station optical surfaces is examined. In particular, contamination of solar voltaic power sources and optical solar reflectors for thermal control or solar dynamic power generation is addressed. The published Space Station requirements for molecular contamination accretion and for the monitoring of such accretion is discussed in the context of the historical performance of space systems. Specific reference is made to the results from the Spacecraft Charging at High Altitudes (SCATHA) ML12 experiment.

Arnold, Graham S.↗

NASA NTRS1988

Automation and robotics for the Space Station - The influence of the Advanced Technology Advisory Committee

The reports of a committee established by Congress to identify specific systems of the Space Station which would advance automation and robotics technologies are reviewed. The history of the committee, its relation to NASA, and the reports which it has released are discussed. The committee's reports recommend the widespread use of automation and robotics for the Space Station, a program for technology development and transfer between industries and research and development communities, and the planned use of robots to service and repair satellites and their payloads which are accessible from the Space Station.

Nunamaker, Robert R.↗