Search NASA⌕ Search

SEARCH · Search NASA

Results for “tensor methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Geometrically necessary dislocation fingerprints of dislocation loop absorption at grain boundaries

Here we present a numerical methodology to compute the Nye-tensor fingerprints of dislocation loop absorption at grain boundaries (GBs) for comparison with TEM observations of irradiated polycrystals. Our approach links atomistic simulations of self-interstitial atom (SIA) prismatic loops gliding toward and interacting with GBs in body-centered cubic iron with experimentally extracted geometrically necessary dislocation (GND) maps to facilitate the interpretation of damage processes. The Nye-tensor analysis is strongly mesh-size dependent—corresponding to resolution-dependent TEM observations. The method computes GND fingerprints from discretized dislocation line segments extracted from molecular dynamics simulations of dislocation loops being absorbed at a GB. Specifically, we perform MD simulation of prismatic loops of two diameters and monitor the three stages of the absorption process: loop glide, the partial, and full absorption of the loops at a [1 0 0] symmetric tilt GB. These methods provide a framework for future investigations of the nature of defect absorption by grain boundaries under irradiation conditions.

36 MATERIALS SCIENCE↗

Fully Scalable Randomized Benchmarking Without Motion Reversal

We introduce , a protocol that streamlines traditional RB by using circuits consisting almost entirely of independent identically distributed (IID) layers of gates. BiRB reliably and efficiently extracts the average error rate of a Clifford gate set by sending tensor-product eigenstates of random Pauli operators through random circuits with IID layers. Unlike existing RB methods, BiRB does not use motion reversal circuits—i.e., circuits that implement the identity (or a Pauli) operator—which simplifies both the method and the theory proving its reliability. Furthermore, this simplicity enables scaling BiRB to many more qubits than the most widely used RB methods. Published by the American Physical Society 2024

Hines, Jordan (ORCID:0000000151267256)↗

A contribution toward rational modeling of the pressure-strain-rate correlation

A novel method of obtaining an analytical expression of the 'linear part' of the pressure-strain-rate tensor in terms of the anisotropy tensor of the Reynolds stresses has been developed, where the coefficients of the seven independent tensor terms are functions of the invariants of the Reynolds-stress anisotropy. The coefficients are evaluated up to fourth order in the anisotropy of the Reynolds stresses to provide guidance for development of a turbulence model.

Lee, Moon Joo↗

A local dynamic model for large eddy simulation

The dynamic model is a method for computing the coefficient C in Smagorinsky's model for the subgrid-scale stress tensor as a function of position from the information already contained in the resolved velocity field rather than treating it as an adjustable parameter. A variational formulation of the dynamic model is described that removes the inconsistency associated with taking C out of the filtering operation. This model, however, is still unstable due to the negative eddy-viscosity. Next, three models are presented that are mathematically consistent as well as numerically stable. The first two are applicable to homogeneous flows and flows with at least one homogeneous direction, respectively, and are, in fact, a rigorous derivation of the ad hoc expressions used by previous authors. The third model in this set can be applied to arbitrary flows, and it is stable because the C it predicts is always positive. Finally, a model involving the subgrid-scale kinetic energy is presented which attempts to model backscatter. This last model has some desirable theoretical features. However, even though it gives results in LES that are qualitatively correct, it is outperformed by the simpler constrained variational models. It is suggested that one of the constrained variational models should be used for actual LES while theoretical investigation of the kinetic energy approach should be continued in an effort to improve its predictive power and to understand more about backscatter.

Ghosal, Sandip↗

Nonlinear Homogenization of Finitely Deformed Viscoelastic-Viscoplastic Composites Using Mechanics of Structure Genome

The objective of this paper is to develop a micromechanics approach to homogenizing finitely deformed viscoelastic-viscoplastic composites using the mechanics of structure genome. The incremental constitutive relation for glassy polymers, formulated in the spatial configuration, is implemented in the present approach.This involves (1) pulling-back the constitutive model to the material configuration and (2)choosing the deformation gradient tensor and the first Piola–Kirchhoff stress tensor as the strain and the stress measures during homogenization, respectively. An Euler–Newton predictor–corrector method is developed for homogenization. Each step involves formulating a variational statement using the mechanics of structure genome, discretizing the statement in a finite-dimensional space, and solving the problem using an Euler/multilevel Newton method. The present approach is demonstrated by homogenizing fiber- and particle-reinforced composites undergoing uniaxial, biaxial, or shear deformation, at different stain rates.

Multi-scale modeling, High Strain Composites, Visc↗

On sampling fractions and electron shower shapes

We study the usage of various definitions of sampling fractions in understanding electron shower shapes in a sampling multilayer electromagnetic calorimeter. We show that the sampling fractions obtained by the conventional definition (I) of (average observed energy in layer)/(average deposited energy in layer) will not give the best energy resolution for the calorimeter. The reason for this is shown to be the presence of layer by layer correlations in an electromagnetic shower. The best resolution is obtained by minimizing the deviation from the total input energy using a least squares algorithm. The 'sampling fractions' obtained by this method (II) are shown to give the best resolution for overall energy. We further show that the method (II) sampling fractions are obtained by summing the columns of a non-local {lambda} tensor that incorporates the correlations. We establish that the sampling fractions (II) cannot be used to predict the layer by layer energies and that one needs to employ the full {lambda} tensor for this purpose. This effect is again a result of the correlations.

43 PARTICLE ACCELERATORS↗

Analytical and variational numerical methods for unstable miscible displacement flows in porous media

The miscible displacement of one fluid by another in a porous medium has received considerable attention in subsurface, environmental and petroleum engineering applications. When a fluid of higher mobility displaces another of lower mobility, unstable patterns – referred to as viscous fingering – may arise. Their physical and mathematical study has been the object of numerous investigations over the past century. In writing this paper the objective is to present a review of these contributions with particular emphasis on variational methods. These algorithms are tailored to real field applications thanks to their advanced features: handling of general complex geometries, robustness in the presence of rough tensor coefficients, low sensitivity to mesh orientation in advection dominated scenarios, and provable convergence with fully unstructured grids.

42 ENGINEERING↗

Plasticity-Induced Structural Anisotropy of Silica Glass

Amorphous silica density at ambient pressure is known to depend on thermal history (through the quenching rate) but also, at room temperature, on the maximum pressure applied in the past. Here we show that beyond density, a mechanical loading can endow the structure with an orientational order. Molecular dynamics simulations show evidence that amorphous silica develops a permanent anisotropic structure after extended shear plastic flow. This anisotropy which survives for an unstressed specimen is revealed markedly by the fabric tensor computed over the Si-O-Si orientations, albeit the SiO{sub 4} tetrahedra microstructure remains mostly unaltered.

36 MATERIALS SCIENCE↗

Vacuum birefringence in strong magnetic fields: (I) Photon polarization tensor with all the Landau levels

Photons propagating in strong magnetic fields are subject to a phenomenon called the 'vacuum birefringence' where refractive indices of two physical modes both deviate from unity and are different from each other. We compute the vacuum polarization tensor of a photon in a static and homogeneous magnetic field by utilizing Schwinger's proper-time method, and obtain a series representation as a result of double integrals analytically performed with respect to proper-time variables. The outcome is expressed in terms of an infinite sum of known functions which is plausibly interpreted as summation over all the Landau levels of fermions. Each contribution from infinitely many Landau levels yields a kinematical condition above which the contribution has an imaginary part. This indicates decay of a sufficiently energetic photon into a fermion-antifermion pair with corresponding Landau level indices. Since we do not resort to any approximation, our result is applicable to the calculation of refractive indices in the whole kinematical region of a photon momentum and in any magnitude of the external magnetic field. - Highlights: Black-Right-Pointing-Pointer Vacuum birefringence is studied in the presence of externally applied magnetic field. Black-Right-Pointing-Pointer A general framework is given on the basis of a vacuum polarization tensor of photon. Black-Right-Pointing-Pointer A resummed vacuum polarization tensor is calculated analytically and exactly. Black-Right-Pointing-Pointer Contributions of all the Landau levels are obtained in the form of an infinite sum. Black-Right-Pointing-Pointer Threshold behavior of real-photon decay is obtained at the each Landau level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Sequential formulation of all‐way coupled finite strain thermoporomechanics for largely deformable gas hydrate deposits

We develop a numerically stable sequential formulation of thermoporomechanics for largely deformable gas hydrate deposits, extended from the fixed stress split of infinitesimal transformation. Constitutive equations are based on the total Lagrangian approach for both flow and geomechanics, including dynamic full tensor permeability and thermal conductivity updated from the deformation gradient. For space discretization, we take the cell-centered finite volume and node-based finite element method for flow and geomechanics, respectively. Then, we propose a sequential implicit method for all-way coupled thermoporomechanics, where the nonisothermal multiphase flow problem of gas hydrates is solved implicitly first and then the geomechanics problem is solved implicitly at the next step. During solution of the flow problem, we fix the rate of first Pioal total stress for numerical stability as well as apply porosity correction and entropy correction to account for geomechanical effects. We test numerical examples where flow and geomechanics parameters are based on deep oceanic gas hydrate deposits. When applying depressurization, even though the results between the infinitesimal transformation and finite strain geomechanics are similar in the early stages due to small deformation, we find differences between them in the late times as deformation becomes large. Accordingly, permeability and thermal conductivity tensors become nonisotropic full tensors although they are initially isotropic. Furthermore, we identify numerical stability of the developed sequential method from the test cases that exhibit the highly complex coupled gas hydrate systems with large deformation. Thus, the proposed sequential formulation can be applied in largely deformable gas hydrate systems.

42 ENGINEERING↗

MOCMC: Method of Characteristics Moment Closure, a Numerical Method for Covariant Radiation Magnetohydrodynamics

In this work, we present a conservative numerical method for radiation magnetohydrodynamics with frequency-dependent full transport in stationary spacetimes. This method is stable and accurate for both large and small optical depths and radiation pressures. The radiation stress–energy tensor is evolved in flux-conservative form, and closed with a swarm of samples that each transport a multigroup representation of the invariant specific intensity along a null geodesic. In each zone, the enclosed samples are used to efficiently construct a Delaunay triangulation of the unit sphere in the comoving frame, which in turn is used to calculate the Eddington tensor, average source terms, and adaptively refine the sample swarm. Furthermore, radiation four-forces are evaluated in the moment sector in a semi-implicit fashion. The radiative transfer equation is solved in invariant form deterministically for each sample. Since each sample carries a discrete representation of the full spectrum, the cost of evaluating the transport operator is independent of the number of frequency groups, representing a significant reduction of algorithmic complexity for transport in frequency-dependent problems. The major approximation we make in this work is performing scattering in an angle-averaged way. Local adaptivity in samples also makes this scheme more amenable to nonuniform meshes than a traditional Monte Carlo method. We describe the method and present results on a suite of test problems. We find that Method of Characteristics Moment Closure converges at least as ~N -1 , rather than the canonical Monte Carlo N -1/2 , where N is the number of samples per zone.

79 ASTRONOMY AND ASTROPHYSICS↗

Calculation of the dynamic first electronic hyperpolarizability β(−ω{sub σ}; ω{sub 1}, ω{sub 2}) of periodic systems. Theory, validation, and application to multi-layer MoS{sub 2}

We describe our implementation of a fully analytical scheme, based on the 2n + 1 rule, for computing the coupled perturbed Hartree Fock and Kohn-Sham dynamic first hyperpolarizability tensor β(−ω{sub σ}; ω{sub 1}, ω{sub 2}) of periodic 1D (polymer), 2D (slab), and 3D (crystal) systems in the CRYSTAL code [R. Dovesi et al., Int. J. Quantum Chem. 114, 1287 (2014)], which utilizes local Gaussian type basis sets. The dc-Pockels (dc-P) and second harmonic generation (SHG) tensors are included as special cases. It is verified that (i) symmetry requirements are satisfied; (ii) using LiF as an example, the infinite periodic polymer result agrees with extrapolated finite oligomer calculations and, likewise, for the build-up to a 2D slab and a 3D crystal; (iii) the values converge to the static case for low frequencies; and (iv) the Bishop-deKee dispersion formulas relating dc-P, SHG, and general processes are reproduced through quartic terms. Preliminary SHG calculations on multi-layer MoS{sub 2} satisfactorily reproduce experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

K-inflationary power spectra at second order

Within the class of inflationary models, k-inflation represents the most general single field framework that can be associated with an effective quadratic action for the curvature perturbations and a varying speed of sound. The incoming flow of high-precision cosmological data, such as those from the Planck satellite and small scale Cosmic Microwave Background (CMB) experiments, calls for greater accuracy in the inflationary predictions. In this work, we calculate for the first time the next-to-next-to-leading order scalar and tensor primordial power spectra in k-inflation needed in order to obtain robust constraints on the inflationary theory. The method used is the uniform approximation together with a second order expansion in the Hubble and sound flow functions. Our result is checked in various limits in which it reduces to already known situations.

79 ASTRONOMY AND ASTROPHYSICS↗

Displacement Fields and Self-Energies of Circular and Polygonal Dislocation Loops in Homogeneous and Layered Anisotropic Solids

There are large classes of materials problems that involve the solutions of stress, displacement, and strain energy of dislocation loops in elastically anisotropic solids, including increasingly detailed investigations of the generation and evolution of irradiation induced defect clusters ranging in sizes from the micro- to meso-scopic length scales. Based on a two-dimensional Fourier transform and Stroh formalism that are ideal for homogeneous and layered anisotropic solids, we have developed robust and computationally efficient methods to calculate the displacement fields for circular and polygonal dislocation loops. Using the homogeneous nature of the Green tensor of order -1, we have shown that the displacement and stress fields of dislocation loops can be obtained by numerical quadrature of a line integral. In addition, it is shown that the sextuple integrals associated with the strain energy of loops can be represented by the product of a pre-factor containing elastic anisotropy effects and a universal term that is singular and equal to that for elastic isotropic case. Furthermore, we have found that the self-energy pre-factor of prismatic loops is identical to the effective modulus of normal contact, and the pre-factor of shear loops differs from the effective indentation modulus in shear by only a few percent. These results provide a convenient method for examining dislocation reaction energetic and efficient procedures for numerical computation of local displacements and stresses of dislocation loops, both of which play integral roles in quantitative defect analyses within combined experimental–theoretical investigations.

36 MATERIALS SCIENCE↗

A tensor train-based isogeometric solver for large-scale 3D poisson problems

We introduce a three-dimensional (3D), fully tensor train (TT) assembled isogeometric analysis (IGA) framework, TT-IGA, for solving partial differential equations (PDEs). Our method reformulates IGA discrete operators into TT format, enabling efficient compression and computation. Geometry evaluations use the original NURBS description at sampling points and TT approximation is applied to geometry-derived coefficient fields and discrete operators. We demonstrate the effectiveness of the proposed TT-IGA framework on the three-dimensional Poisson equation, achieving substantial reductions in memory and computational cost without compromising solution quality.

97 MATHEMATICS AND COMPUTING↗

Generation of vorticity and velocity dispersion by orbit crossing

We study the generation of vorticity and velocity dispersion by orbit crossing using cosmological numerical simulations, and calculate the backreaction of these effects on the evolution of large-scale density and velocity divergence power spectra. We use Delaunay tessellations to define the velocity field, showing that the power spectra of velocity divergence and vorticity measured in this way are unbiased and have better noise properties than for standard interpolation methods that deal with mass-weighted velocities. We show that high resolution simulations are required to recover the correct large-scale vorticity power spectrum, while poor resolution can spuriously amplify its amplitude by more than 1 order of magnitude. We measure the scalar and vector modes of the stress tensor induced by orbit crossing using an adaptive technique, showing that its vector modes lead, when input into the vorticity evolution equation, to the same vorticity power spectrum obtained from the Delaunay method. We incorporate orbit-crossing corrections to the evolution of large-scale density and velocity fields in perturbation theory by using the measured stress tensor modes. We find that at large scales (k{approx_equal}0.1h Mpc{sup -1}) vector modes have very little effect in the density power spectrum, while scalar modes (velocity dispersion) can induce percent-level corrections at z=0, particularly in the velocity divergence power spectrum. In addition, we show that the velocity power spectrum is smaller than predicted by linear theory until well into the nonlinear regime, with little contribution from virial velocities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Application of multigrid methods to the solution of liquid crystal equations on a SIMD computer

We will describe a finite difference code for computing the equilibrium configurations of the order-parameter tensor field for nematic liquid crystals in rectangular regions by minimization of the Landau-de Gennes Free Energy functional. The implementation of the free energy functional described here includes magnetic fields, quadratic gradient terms, and scalar bulk terms through the fourth order. Boundary conditions include the effects of strong surface anchoring. The target architectures for our implementation are SIMD machines, with interconnection networks which can be configured as 2 or 3 dimensional grids, such as the Wavetracer DTC. We also discuss the relative efficiency of a number of iterative methods for the solution of the linear systems arising from this discretization on such architectures.

Farrell, Paul A.↗

Algebraic structure of general electromagnetic fields and energy flow

Highlights: > Algebraic structure of general electromagnetic fields in stationary spacetime. > Eigenvalues and eigenvectors of the electomagnetic field tensor. > Energy-momentum in terms of eigenvectors and Killing vector. > Explicit form of reference frame with vanishing Poynting vector. > Application of formalism to Bessel beams. - Abstract: The algebraic structures of a general electromagnetic field and its energy-momentum tensor in a stationary space-time are analyzed. The explicit form of the reference frame in which the energy of the field appears at rest is obtained in terms of the eigenvectors of the electromagnetic tensor and the existing Killing vector. The case of a stationary electromagnetic field is also studied and a comparison is made with the standard short-wave approximation. The results can be applied to the general case of a structured light beams, in flat or curved spaces. Bessel beams are worked out as example.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗