Search NASA⌕ Search

SEARCH · Search NASA

Results for “time synchronization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Reported light in the sleep environment: enhancement of the sleep diary

Light is the primary synchronizing cue for the circadian timing system, capable of exerting robust physiological effects, even with very dim and/or brief photic exposure. Mammals, including humans, are particularly susceptible to light at night. As such, measures of light in the sleeping environment are critical for evaluating sleep health. Sleep diaries provide inexpensive measures of sleep, but do not typically include light information. Four questions probing visual perception of light in the bedtime and waking environments were added to the Consensus Sleep Diary for Morning administration. As part of a lighting intervention study, 18 hospital Labor and Delivery Department personnel completed the sleep diary for 1 week in each of two experimental conditions while wearing Actiwatch devices equipped with photosensors. Diary responses were evaluated against photosensor values from the beginning and end of each rest interval (n=194 rest intervals), as well as against sleep measures, utilizing linear mixed models. Responses to light questions were related to actual light measures at bedtime, controlling for shift type and experimental condition. In addition, subjective light information at bedtime and waking was related to both objective and subjective sleep parameters, with data generally indicating poorer sleep with light in the sleeping environment. Questions addressing perception of light in the sleeping environment may provide a crude yet affordable metric of relative photic intensity. Further, as responses relate to sleep outcomes, subjective light information may yield valuable insights regarding mechanisms and outcomes of clinical significance in sleep and circadian research.

59 BASIC BIOLOGICAL SCIENCES↗

Bistatic Synthetic Aperture Radar - Issues Analysis and Design

The physical separation of the transmitter from the receiver into perhaps separate flight vehicles (with separate flight paths) in a bistatic Synthetic Aperture radar system adds considerable complexity to an already complex system. Synchronization of waveform parameters and timing attributes become problematic, and notions of even the synthetic aperture itself take on a new level of abstractness. Consequently, a high-performance, fine-resolution, and reliable bistatic SAR system really needs to be engineered from the ground up, with tighter specifications on a number of parameters, and entirely new functionality in other areas. Nevertheless, such a bistatic SAR system appears viable.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

THE SHORT ROTATION PERIOD OF HI’IAKA, HAUMEA’S LARGEST SATELLITE

Hi’iaka is the larger outer satellite of the dwarf planet Haumea. Using relative photometry from the Hubble Space Telescope and Magellan and a phase dispersion minimization analysis, we have identified the rotation period of Hi’iaka to be ∼9.8 hr (double peaked). This is ∼120 times faster than its orbital period, creating new questions about the formation of this system and possible tidal evolution. The rapid rotation suggests that Hi’iaka could have a significant obliquity and spin precession that could be visible in light curves within a few years. We then turn to an investigation of what we learn about the (currently unclear) formation of the Haumea system and family based on this unexpectedly rapid rotation rate. We explore the importance of the initial semimajor axis and rotation period in tidal evolution theory and find that they strongly influence the time required to despin to synchronous rotation, relevant to understanding a wide variety of satellite and binary systems. We find that despinning tides do not necessarily lead to synchronous spin periods for Hi’iaka, even if it formed near the Roche limit. Therefore, the short rotation period of Hi’iaka does not rule out significant tidal evolution. Hi’iaka’s spin period is also consistent with formation near its current location and spin-up due to Haumea-centric impactors.

79 ASTRONOMY AND ASTROPHYSICS↗

stereocambmovie (a1)

STEREOCAM consists of three pairs of stereo camera setups that aim to provide synchronized and stereo-calibrated time series of images that can be used for 3D cloud mask reconstruction. Each camera pair is positioned at approximately 120 degrees from the other pair, with a 17°-19° pitch angle from the ground, and at 5-6 km distance from the ARM Southern Great Plains observatory to cover the region from northeast, northwest, and southern views. Images from both cameras of the same stereo setup can be paired together to obtain 3D reconstruction by triangulation. 3D reconstructions from the ring of three stereo pairs can be combined together to generate a 3D mask from surrounding views. A pair of ARM cloud digital cameras is being used for mobile deployments.

54 ENVIRONMENTAL SCIENCES↗

stereocamb (a1)

STEREOCAM consists of three pairs of stereo camera setups that aim to provide synchronized and stereo-calibrated time series of images that can be used for 3D cloud mask reconstruction. Each camera pair is positioned at approximately 120 degrees from the other pair, with a 17°-19° pitch angle from the ground, and at 5-6 km distance from the ARM Southern Great Plains observatory to cover the region from northeast, northwest, and southern views. Images from both cameras of the same stereo setup can be paired together to obtain 3D reconstruction by triangulation. 3D reconstructions from the ring of three stereo pairs can be combined together to generate a 3D mask from surrounding views. A pair of ARM cloud digital cameras is being used for mobile deployments.

54 ENVIRONMENTAL SCIENCES↗

stereocamamovie (a1)

STEREOCAM consists of three pairs of stereo camera setups that aim to provide synchronized and stereo-calibrated time series of images that can be used for 3D cloud mask reconstruction. Each camera pair is positioned at approximately 120 degrees from the other pair, with a 17°-19° pitch angle from the ground, and at 5-6 km distance from the ARM Southern Great Plains observatory to cover the region from northeast, northwest, and southern views. Images from both cameras of the same stereo setup can be paired together to obtain 3D reconstruction by triangulation. 3D reconstructions from the ring of three stereo pairs can be combined together to generate a 3D mask from surrounding views. A pair of ARM cloud digital cameras is being used for mobile deployments.

54 ENVIRONMENTAL SCIENCES↗

stereocama (a1)

STEREOCAM consists of three pairs of stereo camera setups that aim to provide synchronized and stereo-calibrated time series of images that can be used for 3D cloud mask reconstruction. Each camera pair is positioned at approximately 120 degrees from the other pair, with a 17°-19° pitch angle from the ground, and at 5-6 km distance from the ARM Southern Great Plains observatory to cover the region from northeast, northwest, and southern views. Images from both cameras of the same stereo setup can be paired together to obtain 3D reconstruction by triangulation. 3D reconstructions from the ring of three stereo pairs can be combined together to generate a 3D mask from surrounding views. A pair of ARM cloud digital cameras is being used for mobile deployments.

54 ENVIRONMENTAL SCIENCES↗

Dust storms - Great Plains, Africa, and Mars

Dust storms in the Great Plains of North America and in the Sahara Desert are analyzed on the basis of imagery from the geostationary Synchronous Meteorological Satellite. The onset time, location and areal extent of the dust storms are studied. Over land surfaces, contrast enhancement techniques are needed to obtain an adequate picture of dust storm development. In addition, infrared imagery may provide a means of monitoring the strong horizontal temperature gradients characteristic of dust cloud boundaries. Analogies between terrestrial dust storms and the airborne rivers of dust created by major Martian dust storms are also drawn.

Woiceshyn, P. M.↗

The LASSO experiment

An international coordinated experimental assessment of a system which promises to provide a synchronization of clocks bound to time and frequency standard laboratories, with an accuracy of one nanosecond using existing or near ground-based laser stations via a geostationary satellite (SIRIO-2) is detailed. The system performance and the technical details concerning the on-board equiment, the ground segment, and the operational configuration are discussed. Finally, the future prospects of the LASSO experiment and possible implementations are examined together.

Serene, B.↗

Satellite observations of the spatial extent and structure of Pc 3, 4, 5 pulsations near the magnetospheric equator

Simultaneous observations of Pc 3, 4, 5 pulsations by five satellites in the pre-noon local time sector at and near synchronous orbit are examined. The periods of these simultaneous pulsations are not the same at the different observation points. This difference is attributed to site dependent resonant conditions. The spatial properties of the temporal phenomenon are demonstrated with observations by ISEE-1 and -2 as they pass through oscillations in a spatially limited region. Fundamental and second harmonic standing Alfven waves are observed simultaneously on the same field line. The periods are consistent with model predictions when the measured plasma composition, which by mass consists mainly of singly ionized oxygen, is taken into account.

Singer, H. J.↗

SETI Pulse Detection Algorithm: Analysis of False-alarm Rates

Some earlier work by the Search for Extraterrestrial Intelligence (SETI) Science Working Group (SWG) on the derivation of spectrum analyzer thresholds for a pulse detection algorithm based on an analysis of false alarm rates is extended. The algorithm previously analyzed was intended to detect a finite sequence of i periodically spaced pulses that did not necessarily occupy the entire observation interval. This algorithm would recognize the presence of such a signal only if all i-received pulse powers exceeded a threshold T(i): these thresholds were selected to achieve a desired false alarm rate, independent of i. To simplify the analysis, it was assumed that the pulses were synchronous with the spectrum sample times. This analysis extends the earlier effort to include infinite and/or asynchronous pulse trains. Furthermore, to decrease the possibility of missing an extraterrestrial intelligence signal, the algorithm was modified to detect a pulse train even if some of the received pulse powers fall below the threshold. The analysis employs geometrical arguments that make it conceptually easy to incorporate boundary conditions imposed on the derivation of the false alarm rates. While the exact results can be somewhat complex, simple closed form approximations are derived that produce a negligible loss of accuracy.

Levitt, B. K.↗

Ensuring fault tolerance of phase-locked clocks

Processors within a real-time multiprocessor system must be synchronized with as little overhead as possible. Although synchronization can be achieved via both software (e.g., interactive convergence and interactive consistency algorithms) and hardware (e.g., multistage synchronizers and phase-locked clocks), phase-locked clocks are most attractive due to their small overheads. Despite the fact that synchronization of the multiprocessor system with phase-locked clocks is totally different in nature from the interactive consistency algorithm, it is presently proven that it must satisfy the same condition, N equal to or greater than 3m + 1, where N is the total number of clocks in the multiprocessor system and m is the maximum number of faults tolerable. Also presented are results showing how to design phase-locked clocks so as to be impervious up to a given arbitrary number of malicious failures.

Krishna, C. M.↗

An advanced microcomputer design for processing of semiconductor materials

In the Get Away Special 330 payload two germanium samples doped with gallium will be processed. The aim of the experiments is to create a planar solid/liquid interface, and to study the breakdown of this interface as the crystal growth rate increases. For the experiments a gradient furnace was designed which is heated by resistive heaters. Cooling is provided by circulating gas from the atmosphere in the cannister through cooling channels in the furnace. The temperature along the sample are measured by platinum/rhodium thermocouples. The furnace is controlled by a microcomputer system, based upon the processor 80C88. A data acquisition system is integrated into the system. In order to synchronize the different actions in time, a multitask manager is used.

Bjoern, L.↗

Performance impacts of look-ahead execution in the conversation scheme

The look-ahead execution approach, which allows participant processes that exist early to exit from a conversation before other participants finish their conversation activities, is presented here as a fundamental approach to reducing the synchronization overhead. Queuing network models are developed for systems operating under the basic conversation execution scheme and systems operating under the look-ahead execution scheme. Based on the models, various performance indicators such as the system throughput, the average number of processors idling inside a conversation due to the synchronization required, and the average time spent in conversation are evaluated numerically for different application environments. The results provide insights into the extent of benefits provided by the look-ahead execution approach.

Kim, K. H.↗

Nonmigrating diurnal tides in the equatorial middle atmosphere

Data from the Nimbus-7 Limb Infrared Monitor of the Stratosphere (LIMS) are used to extend the analysis of diurnal tides in the middle atmosphere to include the zonally symmetric and eastward propagating components. These modes show vertical and meridional structures that are generally consistent with the predictions of linear tidal theory. The zonal and meridional wind fields are calculated from the tidal temperatures. Diurnal perturbations in LIMS temperature and derived winds agree well with equinoctial model calculations. Comparisons with day-night differences of radiosonde temperature and rocket winds show qualitative agreement in vertical structure and amplitude. The zonally symmetric and eastward migrating tidal components show a higher degree of temporal variability than the sun-synchronous component. These modes at times contribute substantially to the diurnal signal in wind and temperature, with combined amplitudes equal to or in excess of the amplitude of the main migrating diurnal tide. The observed vertical phase variations suggest that their forcing may originate below the stratosphere.

Lieberman, Ruth S.↗

A New Approach to Measure Contact Angle and Evaporation Rate with Flow Visualization in a Sessile Drop

The contact angle and the spreading process of sessile droplet are very crucial in many technological processes, such as painting and coating, material processing, film-cooling applications, lubrication, and boiling. Additionally, as it is well known that the surface free energy of polymers cannot be directly, measured for their elastic and viscous restraints. The measurements of liquid contact angle on the polymer surfaces become extremely important to evaluate the surface free energy of polymers through indirect methods linked with the contact angle data. Due to the occurrence of liquid evaporation is inevitable, the effects of evaporation on the contact angle and the spreading become very important for more complete understanding of these processes. It is of interest to note that evaporation can induce Marangoni-Benard convection in sessile drops. However, the impacts of the inside convection on the wetting and spreading processes are not clear. The experimental methods used by previous investigators cannot simultaneously measure the spreading process and visualize the convection inside. Based on the laser shadowgraphic system used by the present author, a very simple optical procedure has been developed to measure the contact angle, the spreading speed, the evaporation rate, and to visualize inside convection of a sessile drop simultaneously. Two CCD cameras were used to synchronously record the real-time diameter of the sessile drop, which is essential for determination of both spreading speed and evaporation rate, and the shadowgraphic image magnified by the sessile drop acting as a thin plano-convex lens. From the shadowgraph, the inside convection of the drop can be observed if any and the image outer diameter, which linked to the drop profile, can be measured. Simple equations have been derived to calculate the drop profile, including the instantaneous contact angle, height, and volume of the sessile drop, as well as the evaporation rate. The influence of the inside convection on the wetting and spreading processes can be figured out through comparison of the drop profiles with and without inside convection when the sessile drop is placed at different evaporation conditions.

Zhang, Nengli↗