Search NASA⌕ Search

SEARCH · Search NASA

Results for “tracking problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Extension of OpenMC for Fixed Source Transmutation Calculations

This report documents work performed under a Strategic Partnership Project between Argonne National Laboratory (ANL) and the United Kingdom Atomic Energy Authority (UKAEA). The overall goal of this project is to extend OpenMC [1], a community-developed Monte Carlo particle transport code, to be able to perform fixed-source transmutation calculations. In fission and fusion reactors, the high flux of energetic neutrons causes materials within the reactor to “transmute,” or undergo a nuclear reaction that results in the addition/removal of neutrons and protons from the nucleus of an atom. If subjected to these reactions for long enough, the overall composition and physical properties of the material itself begin to change as a result of transmutation. Such a feature is vital for predicting the decrease in tritium production rate within a breeder blanket during the lifetime of a fusion reactor. OpenMC is capable of simulating neutron transport in fission/fusion systems, thereby allowing it to estimate the flux that causes transmutation. It is also capable of solving the transmutation equations, which determine how the composition of a material changes over time due to neutron irradiation and radioactive decay. However, solving the transmutation equations was previously only possible when the source of neutrons came from a fission system. In a fusion system, the source of neutrons is typically determined by a separate code and then given as an input to the particle transport simulation. This is known as a fixed source calculation. Through this project, we have extended OpenMC to solve the transmutation equations for a fixed source calculation. Evaluating the change in material compositions due to transmutation and its effect on physical properties is of key importance to a range of engineering analyses for fission and fusion systems. For example, in a fusion reactor, estimating the dose rate at different physical locations resulting from irradiated materials in the reactor allows designers to ensure that workers are not exposed to doses beyond applicable regulations. In order to properly dispose of irradiated materials, designers also need to estimate the radiotoxicity, which again relies on knowledge of the material composition at some future time. The specific tasks for this project that were agreed to between ANL and UKAEA were as follows: 1. Make changes and additions in the openmc.deplete and related modules in OpenMC to support transmutation calculations following a fixed source transport simulation. 2. Make necessary changes to OpenMC to model transmutation due to an arbitrary set of reactions needed for fusion applications. Use this new capability to generate a depletion chain file based on the TENDL nuclear data library. 3. Improve the openmc.deplete module in OpenMC to keep track of gases produced as a by-product of nuclear reactions during transmutation calculations. 4. Validate the new capabilities by carrying out fixed-source transmutation calculations on a suitable benchmark problem using OpenMC and a comparable Monte Carlo neutron transport code.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1975

NASA management of the Space Shuttle Program

The management system and management technology described have been developed to meet stringent cost and schedule constraints of the Space Shuttle Program. Management of resources available to this program requires control and motivation of a large number of efficient creative personnel trained in various technical specialties. This must be done while keeping track of numerous parallel, yet interdependent activities involving different functions, organizations, and products all moving together in accordance with intricate plans for budgets, schedules, performance, and interaction. Some techniques developed to identify problems at an early stage and seek immediate solutions are examined.

Peters, F.↗
NASA NTRS1975

Helios /cooperative solar probe/

The joint German and NASA project Helios is reviewed with special attention paid to the advanced technology required to accomplish the mission, i.e., thermal (second surface mirrors), telecommunications (despun high gain antenna) and power (high temperature solar cells). Engineering and system results are presented for the Mar. 15, 1975 perihelion passage of Helios A to within 0.31 AU of the sun. Also discussed are mission design, the experiment performance, spacecraft configurations, the launch vehicle, and tracking and data acquisition. Tables are included describing the history of German-U.S. cooperation, prelaunch milestones and significant mission events, experiments performance during primary mission and mission dependent requirements, development problems and solutions.

Ousley, G. W.↗
NASA NTRS1977

Tracking performance of symbol synchronizers for Manchester coded data

The implementation and tracking performance of symbol synchronizers for Manchester coded data is presented with motivation provided by maximum a posteriori (MAP) estimation theory. Certain physically relizable closed-loop structures, readily implemented in practice, are suggested by the theory for uncoded data symbols with arbitrary data transition probabilities. The tracking performance of these loops is optimized and comparisons are made among the various configurations over a wide range of system parameters. Although not the major intent of the paper, the acquisition problem is briefly addressed.

Simon, M. K.↗
NASA NTRS1988

Cartesian path control of a two-degree-of-freedom robot manipulator

The problem of cartesian trajectory control of a closed-kinematic chain mechanism robot manipulator with possible space station applications is considered. The study was performed by both computer simulation and experimentation for tracking of three different paths: a straight line, a sinusoid and a circle. Linearization and pole placement methods are employed to design controller gains. Results show that the controllers are robust and there are good agreements between simulation and experimentation. Excellent tracking quality and small overshoots are also evident.

Nguyen, Charles C.↗
NASA NTRS1987

An intelligent tutor for the space domain

An intelligent tutoring system for the space domain is described. This system was developed on a Xerox 1108 using LOOPS and provides an environment for discovering principles of ground tracks as a direct function of the orbital elements. Some of the more practical design and implementation issues associated with the development of intelligent tutoring systems are examined. Some solutions to the problems and some suggestions for future research are offered.

Swigger, Kathleen↗
NASA NTRS1993

Cognitive engineering in aerospace application: Pilot interaction with cockpit automation

Because of recent incidents involving glass-cockpit aircraft, there is growing concern with cockpit automation and its potential effects on pilot performance. However, little is known about the nature and causes of problems that arise in pilot-automation interaction. The results of two studies that provide converging, complementary data on pilots' difficulties with understanding and operating one of the core systems of cockpit automation, the Flight Management System (FMS) is reported. A survey asking pilots to describe specific incidents with the FMS and observations of pilots undergoing transition training to a glass cockpit aircraft served as vehicles to gather a corpus on the nature and variety of FMS-related problems. The results of both studies indicate that pilots become proficient in standard FMS operations through ground training and subsequent line experience. But even with considerable line experience, they still have difficulties tracking FMS status and behavior in certain flight contexts, and they show gaps in their understanding of the functional structure of the system. The results suggest that design-related factors such as opaque interfaces contribute to these difficulties which can affect pilots' situation awareness. The results of this research are relevant for both the design of cockpit automation and the development of training curricula specifically tailored to the needs of glass cockpits.

Sarter, Nadine R.↗
NASA NTRS2003

Orbit Determination Error Analysis Results for the Triana Sun-Earth L2 Libration Point Mission

Using the NASA Goddard Space Flight Center's Orbit Determination Error Analysis System (ODEAS), orbit determination error analysis results are presented for all phases of the Triana Sun-Earth L1 libration point mission and for the science data collection phase of a future Sun-Earth L2 libration point mission. The Triana spacecraft was nominally to be released by the Space Shuttle in a low Earth orbit, and this analysis focuses on that scenario. From the release orbit a transfer trajectory insertion (TTI) maneuver performed using a solid stage would increase the velocity be approximately 3.1 km/sec sending Triana on a direct trajectory to its mission orbit. The Triana mission orbit is a Sun-Earth L1 Lissajous orbit with a Sun-Earth-vehicle (SEV) angle between 4.0 and 15.0 degrees, which would be achieved after a Lissajous orbit insertion (LOI) maneuver at approximately launch plus 6 months. Because Triana was to be launched by the Space Shuttle, TTI could potentially occur over a 16 orbit range from low Earth orbit. This analysis was performed assuming TTI was performed from a low Earth orbit with an inclination of 28.5 degrees and assuming support from a combination of three Deep Space Network (DSN) stations, Goldstone, Canberra, and Madrid and four commercial Universal Space Network (USN) stations, Alaska, Hawaii, Perth, and Santiago. These ground stations would provide coherent two-way range and range rate tracking data usable for orbit determination. Larger range and range rate errors were assumed for the USN stations. Nominally, DSN support would end at TTI+144 hours assuming there were no USN problems. Post-TTI coverage for a range of TTI longitudes for a given nominal trajectory case were analyzed. The orbit determination error analysis after the first correction maneuver would be generally applicable to any libration point mission utilizing a direct trajectory.

Marr, G.↗
NASA NTRSDate not supplied

Design of a Jettison System For Space Transit Vehicles

Many options to re-use waste are currently being developed by NASA. These include combustion, compaction, torrefaction, and converting waste materials to an easily stored base polymer for future use. Human exploration missions require large amounts of supplies such as food, clothing and spare parts. A many-month journey to Mars will result in the generation of a substantial amount of problematic waste products. It is thought that this waste must be discarded to enable a Mars transit mission. The most cost-effective, reliable, and safest method to address this problem may be to simply jettison these materials from the spacecraft. The ability to jettison requires a multi-component integrated system design. Major components include a launcher, airlocks, trash bags, and tracking system. Depending upon mission requirements, a jettison dedicated airlock may be necessary. In other cases, the crew airlock might be all that’s needed. Examples of what to jettison include food waste, fecal containers, broken equipment, foam, expendables, hygiene products, health items, wipes, and clothing. The most important design factor is always crew safety. Other features to consider are loss of air due to the inefficiencies of vacuum pumps in the airlock, outgassing from the bags, and liquids condensing on the airlock that result in unwanted coatings. The launching system design must consider many different features: while in planetary orbit, a minimum exit velocity is necessary so the jettisoned material will not complete an orbit only to return and strike the ship. Also, for planetary protection issues, enabling waste to be sent to distant non-critical locations is highly desirable. When the space craft is in planetary transit to say, Mars, the jettison exit velocity should be low if the material is not released along the direction of travel. This is to minimize trajectory perturbations due to jettison-imposed torque on the spacecraft. Design considerations for the launcher include exit velocity, power consumption, volume and mass of material jettisoned, and frequency of jettison. Finally, the launcher must be able to handle many different types and shapes of waste products. This paper will discuss these design issues and give guidance to a pathway forward.

Steve Sepka↗
NASA NTRS1983

Orbiter global positioning system design and Ku-band problem investigations, exhibit B, revision 1

The hardware, software, and interface between them was investigated for a low dynamics, nonhostile environment, low cost GPS receiver (GPS Z set). The set is basically a three dimensional geodetic and way point navigator with GPS time, ground speed, and ground track as possible outputs in addition to the usual GPS receiver set outputs. Each functional module comprising the GPS set is described, enumerating its functional inputs and outputs, leading to the interface between hardware and software of the set.

Lindsey, W. C.↗
NASA NTRS1992

Validating a large geophysical data set: Experiences with satellite-derived cloud parameters

We are validating the global cloud parameters derived from the satellite-borne HIRS2 and MSU atmospheric sounding instrument measurements, and are using the analysis of these data as one prototype for studying large geophysical data sets in general. The HIRS2/MSU data set contains a total of 40 physical parameters, filling 25 MB/day; raw HIRS2/MSU data are available for a period exceeding 10 years. Validation involves developing a quantitative sense for the physical meaning of the derived parameters over the range of environmental conditions sampled. This is accomplished by comparing the spatial and temporal distributions of the derived quantities with similar measurements made using other techniques, and with model results. The data handling needed for this work is possible only with the help of a suite of interactive graphical and numerical analysis tools. Level 3 (gridded) data is the common form in which large data sets of this type are distributed for scientific analysis. We find that Level 3 data is inadequate for the data comparisons required for validation. Level 2 data (individual measurements in geophysical units) is needed. A sampling problem arises when individual measurements, which are not uniformly distributed in space or time, are used for the comparisons. Standard 'interpolation' methods involve fitting the measurements for each data set to surfaces, which are then compared. We are experimenting with formal criteria for selecting geographical regions, based upon the spatial frequency and variability of measurements, that allow us to quantify the uncertainty due to sampling. As part of this project, we are also dealing with ways to keep track of constraints placed on the output by assumptions made in the computer code. The need to work with Level 2 data introduces a number of other data handling issues, such as accessing data files across machine types, meeting large data storage requirements, accessing other validated data sets, processing speed and throughput for interactive graphical work, and problems relating to graphical interfaces.

Kahn, Ralph↗
DOE OSTI2024

A Thermo‐Flow‐Mechanics‐Fracture Model Coupling a Phase‐Field Interface Approach and Thermo‐Fluid‐Structure Interaction

This work proposes a novel approach for coupling non-isothermal fluid dynamics with fracture mechanics to capture thermal effects within fluid-filled fractures accurately. This method addresses critical aspects of calculating fracture width in enhanced geothermal systems, where the temperature effects of fractures are crucial. The proposed algorithm features an iterative coupling between an interface-capturing phase-field fracture method and interface-tracking thermo-fluid-structure interaction using arbitrary Lagrangian–Eulerian coordinates. We use a phase-field approach to represent fractures and reconstruct the geometry to frame a thermo-fluid-structure interaction problem, resulting in pressure and temperature fields that drive fracture propagation. We developed a novel phase-field interface model accounting for thermal effects, enabling the coupling of quantities specific to the fluid-filled fracture with the phase-field model through the interface between the fracture and the intact solid domain. We provide several numerical examples to demonstrate the capabilities of the proposed algorithm. In particular, we analyze mesh convergence of our phase-field interface model, investigate the effects of temperature on crack width and volume in a static regime, and highlight the method's potential for modeling slowly propagating fractures.

fracture↗
DOE OSTI2019

Modeling and simulation of Ultrasonic Guided Waves propagation in the fluid-structure domain by a monolithic approach

The present study introduces the coupled multiphysics model as part of the structural health monitoring (SHM) system. In particular, the Ultrasonic Guided Waves (UGWs) propagation is tracked in order to identify the damage to the structure. For this purpose, a multiphysics mathematical model is proposed. The model constitutes a monolithically coupled system of acoustic and elastic wave equations (WpFSI problem) where the wave signal displacement measurements are analyzed as the UGWs propagates in the solid, fluid and their interface. The ultimate goal of this paper is to explore and develop the efficient numerical solution of the WpFSI problem using the finite element method. A detailed description of the modeling framework and conditions that facilitate the coupling is provided. To couple the displacement-based acoustic wave equations for the isothermal fluid with elastic wave equations for the Saint Venant-Kirchhoff material model, the present study uses a monolithic solution algorithm. In particular, at each time step, wave equations are transformed to a fixed reference configuration via the arbitrary Lagrangian-Eulerian (ALE) mapping and automatically adopt the boundary conditions from the previous time step. The implementation is accomplished via the finite element library deal.II (Goll et al., 2017) based software toolbox DOpElib (Bangerth et al., 2007) which provides modularized higher level algorithms. Beyond SHM systems, the model is relevant for problems from biomechanics and biomedicine, vibromechanics, poroelasticity as well as subsurface and porous media flow. Here, the model developed here serves as a first step towards the on-line SHM system modeling, where structural dynamics are accounted for.

42 ENGINEERING↗
DOE OSTI2019

Distributed output-feedback model predictive control for multi-agent consensus

We introduce a distributed output-feedback model predictive control approach for achieving consensus among multiple agents. Each agent computes a distributed control action based on an output-feedback measurement of a local neighborhood tracking error and communicates information only to its neighbors, according to a communication network modeled as a directed graph. Each agent computes its distributed control action by solving a local min–max optimization problem that simultaneously computes a local state estimate and control input under worst-case assumptions on unmeasured input disturbances and measurement noise. Under easily verified controllability and observability assumptions, this distributed output-feedback model predictive control approach provides an upper bound on the group consensus error, thereby ensuring practical consensus in the presence of unmeasured disturbances and noise. A numerical example with four agents connected in a directed graph is demonstrated to illustrate the results.

42 ENGINEERING↗
NASA NTRS1975

Compatibility of meteorological rocketsonde data as indicated by international comparison tests

Results of two experiments involving intercomparisons of rocketsonde measurements of temperature and wind data in the 25 to 80 km altitude region in the CIMO (Commission for Instruments and Methods of Observations) program during September 1973 are reported. Rocketsonde systems used by France, the USSR, the UK, the U.S., and Japan in the two parts of the program (one series of tests at Wallops Island, Va., the other in French Guiana) are described. Wind data were derived from radar tracking of retardation devices and payloads in descent. Day and night temperature differences were examined. The intercomparisons revealed excellent compatibility of the rocketsonde data up to 60 km in wind observations. Some outstanding problems are pointed out.

Finger, F. G.↗
NASA NTRS1979

Shuttle GPS R/PA configuration and specification study

Changes in the technical specifications for a global positioning system (GPS) receiving system dedicated to space shuttle use are presented. Various hardware functions including acquisition, tracking, and measurement are emphasized. The anti-jam performance of the baseline GPS systems are evaluated. Other topics addressed include: the impact on R/PA design of the use of ground based transmitters; problems involved with the use of single channel tests sets; utility of various R/PA antenna interconnections topologies; the choice of the averaging interval for delta range measurements; and the use of interferometry techniques for the computation of orbiter attitude were undertaken.

Booth, R. W. D.↗
NASA NTRS1982

Sideband-aided receiver arraying

Efforts to increase the amount of data that can be received from outer planet missions by coherently combining signals from ground antennas in such a way as to increase the total effective aperture of the receiving system are discussed. As these signals become weaker, the baseband arraying technique in current use degrades somewhat due to carrier jitter. One solution to this problem is Sideband-Aided Receiver Arraying (SARA). In SARA, sidebands demodulated to baseband in a master receiver at the largest antenna are used to allow slave receivers in the other antennas to track the sideband power in the signal rather than the carrier power. The already existing receivers can be used in the slaves to track and demodulate the signals in either a residual carrier or a suppressed carrier environment. The resultant baseband signals from all the antennas can then be combined using existing baseband combining equiment. Computer simulations of SARA show increases in throughput (measured in data bits per second) over baseband-only combining 17 percent at Voyager 2 Uranum encounter and 31 percent at Neptune for a four-element antenna array and (7, 1/2) convolutional coding.

Butman, S. A.↗
NASA NTRS1987

Safe microburst penetration techniques: A deterministic, nonlinear, optimal control approach

A relatively large amount of computer time was used for the calculation of a optimal trajectory, but it is subject to reduction with moderate effort. The Deterministic, Nonlinear, Optimal Control algorithm yielded excellent aircraft performance in trajectory tracking for the given microburst. It did so by varying the angle of attack to counteract the lift effects of microburst induced airspeed variations. Throttle saturation and aerodynamic stall limits were not a problem for the case considered, proving that the aircraft's performance capabilities were not violated by the given wind field. All closed loop control laws previously considered performed very poorly in comparison, and therefore do not come near to taking full advantage of aircraft performance.

Psiaki, Mark L.↗