Search NASA⌕ Search

SEARCH · Search NASA

Results for “yield analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Dynamic Strength and Equation of State of Epon 828 and Diethanolamine (DEA) Polymer Epoxy Under Shock Loading

Polymers are increasingly utilized in engineering applications that can experience high loading rates, necessitating increased understanding of their response under such conditions. The tamped Richtmyer-Meshkov Instability (RMI) method was used to characterize the equation of state and dynamic strength of the polymer Epon 828 cured with Diethanolamine (DEA). Plate impact experiments that drove a uniaxial shock compression wave across a sinusoidally corrugated metal-polymer interface were performed to generate shock stresses from 4-12 GPa and strain rates of approximately 1/s in the polymer. X-ray phase contrast imaging recorded the shock motion in the polymer and subsequent interface evolution. Analysis of this data yielded the polymer equation of state and, in conjunction with numerical modeling, the dynamic strength. The equation of state was validated against one-dimensional plate impact experiments from existing literature. The dynamic strength was compared to prior data for Epon 828 and related polymers at lower strain rates and found to exhibit significant strain rate and pressure-hardening effects. The strength of the Epon 828 polymer at 10 6 1/s was found to be approximately 1.5 GPa, suggesting that it is comparable to the strength of high strength metals at these dynamic conditions.

Equation of state↗

Analysis of conical slump shape reconstructed from stereovision images for yield stress prediction

Highlights: • Conical slump model tends to underpredict yield stress of material by slump height. • Profiles of slumped materials were reconstructed from stereovision images. • Actual profiles were compared to those predicted by cone and cylinder model. • The cause of deviation lies in the cylinder-like behaviour of conical slumping. • The model of equivalent cylinder could give an accurate yield stress value. Slump cones are widely utilised to evaluate the workability of cement materials owing to their simplicity. Analytical models have been established to relate this empirical value to the yield stress. However, they tend to be less effective for the cone and more valid for cylinder slumps. The cause of this deviation is yet to be fully understood. In this work, more details were sought from slump profiles using stereovision technology. A direct comparison of the predicted shapes based on conical model as well as cylindrical model to actual shapes was undertaken. The visual illustration clearly indicated that conical slumping shows a cylinder-like behaviour, and the slumped shapes in cone tests agree well with those predicted by an equivalent cylinder. By converting to cylindrical dimensionless units, the conical slump height can provide an accurate yield stress. The results suggest that the theory is valid if the slumping behaviour is effectively assumed.

36 MATERIALS SCIENCE↗

Role of FDG-PET in the Definition of Involved-Field Radiation Therapy and Management for Pediatric Hodgkin's Lymphoma

Purpose: To evaluate positron emission tomography-computed tomography (PET-CT) influences in involved-field radiation therapy (IFRT) field design in pediatric Hodgkin's lymphoma (HL). Materials and Methods: From June 2003 to February 2008, 30 pediatric HL patients were treated at Children's Healthcare of Atlanta (CHOA) and Emory University Department of Radiation Oncology with both chemotherapy and IFRT. Diagnostic contrast-enhanced CT and PET-CT were coregistered using image fusion software. Both were reviewed for all potential sites of involvement and correlated to determine concordance and discordance. They were used in IFRT planning to determine the influence of PET-CT on target volumes and field design. Results: There were 546 regions analyzed by both PET and CT modalities. Image sets were concordant in 468 regions and discordant in 78, yielding 86% concordance overall. Analysis by weighted {kappa} statistic showed 'intermediate to good' fit overall and for nodal sites, but 'poor' agreement for extranodal sites. If discordant, a site was most likely PET+/CT-. Integration of PET information caused a change in staging in 15 (50%) patients, 7 upstaged and 8 downstaged. The IFRT volumes were adjusted on the basis of initial PET-CT finding in 21 (70%) patients, with 32 sites added and 15 excluded. There were four relapses, only one outside IFRT fields, but all were successfully salvaged. Conclusion: PET-CT represents an important tool in the management of pediatric patients with HL and has a substantial influence on both initial staging and radiation treatment target definition and field design.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Aromatics and phenols from catalytic pyrolysis of Douglas fir pellets in microwave with ZSM-5 as a catalyst

Microwave assisted catalytic pyrolysis was investigated to convert Douglas fir pellets to bio-oils by a ZSM-5 Zeolite catalyst. A central composite experimental design (CCD) was used to optimize the catalytic pyrolysis process. The effects of reaction time, temperature and catalyst to biomass ratio on the bio-oil, syngas, and biochar yields were determined. GC/MS analysis results showed that the bio-oil contained a series of important and useful chemical compounds. Phenols, guaiacols, and aromatic hydrocarbons were the most abundant compounds which were about 50-82 % in bio-oil depending on the pyrolysis conditions. Comparison between the bio-oils from microwave pyrolysis with and without catalyst showed that the catalyst increased the content of aromatic hydrocarbons and phenols. A reaction pathway was proposed for microwave assisted catalyst pyrolysis of Douglas fir pellets.

Microwave, Catalytic pyrolysis, douglas fir pellet↗

Reduced deuterium retention in simultaneously damaged and annealed tungsten

Deuterium (D) retention in polycrystalline tungsten (W) with copper (Cu) ion damage concurrently produced at elevated surface temperature is investigated in this paper. An in situ heated stage held W samples at a controlled temperature up to 1243 K, which were subjected to displacement damage produced by 3.4 MeV Cu ions. D retention is subsequently explored by exposure of the W samples held at 383 K to a D 2 plasma ion fluence of 10 24 D + /m 2 . Nuclear reaction analysis (NRA), utilizing the D( 3 He,p) 4 He nuclear reaction, is used to probe the D concentration in the near surface up to 6 μm. Thermal desorption spectroscopy (TDS) is used to measure outgassed HD and D 2 molecules to determine the bulk D concentration. Both NRA and TDS measure a significant reduction in D retention for samples damaged at elevated temperature. TDS quantitatively shows that the lowest energy trap remains largely unaffected while higher energy traps, induced by Cu ions, are annealed and approach intrinsic concentrations as the temperature during ion damage approaches 1243 K. Finally, analysis of TDS data yields an activation energy of (0.10 ± 0.02) eV for recovery of ion-damage induced traps at elevated temperature.

36 MATERIALS SCIENCE↗

Fergusonite-type CeNbO{sub 4+δ}: Single crystal growth, symmetry revision and conductivity

Large fergusonite-type (ABO{sub 4}, A=Ce, B=Nb) oxide crystals, a prototype electrolyte composition for solid oxide fuel cells (SOFC), were prepared for the first time in a floating zone mirror furnace under air or argon atmospheres. While CeNbO{sub 4} grown in air contained CeNbO{sub 4.08} as a minor impurity that compromised structural analysis, the argon atmosphere yielded a single phase crystal of monoclinic CeNbO{sub 4}, as confirmed by selected area electron diffraction, powder and single crystal X-ray diffraction. The structure was determined in the standard space group setting C12/c1 (No. 15), rather than the commonly adopted I12/a1. AC impedance spectroscopy conducted under argon found that stoichiometric CeNbO{sub 4} single crystals showed lower conductivity compared to CeNbO{sub 4+δ} confirming interstitial oxygen can penetrate through fergusonite and is responsible for the higher conductivity associated with these oxides. - Graphical abstract: Large fergusonite-type CeNbO{sub 4} crystals were prepared for the first time in a floating zone mirror furnace. Crystal growth in an argon atmosphere yielded a single phase monoclinic CeNbO4, as confirmed by selected area electron diffraction, powder and single crystal X-ray diffraction. The structure was determined in the standard space group setting C12/c1 (No. 15), rather than the commonly adopted I12/a1. AC impedance spectroscopy found CeNbO{sub 4} single crystals showed lower conductivity compared to CeNbO{sub 4+δ} confirming interstitial oxygen can penetrate through fergusonite and is responsible for the higher conductivity associated with these oxides. Highlights: • Preparation of single crystals of CeNbO{sub 4} using a floating zone mirror furnace. • Correction to the crystal symmetry of the monoclinic form of CeNbO{sub 4}. • Report the conductivity of a single crystal of CeNbO{sub 4}.

36 MATERIALS SCIENCE↗

LaBr 3 : Ce self-activation analysis for measuring fast neutron fields

Measurement of the fast neutron production rate in deuterium–tritium (D–T) fusion reactions is important for applications such as active interrogation, fusion diagnostics, and borehole logging. Such measurements are typically performed by neutron activation analysis of metal foils, especially copper. Copper foil activation analysis requires efficiency and energy calibrations of the detector used to measure the foil, and it relies on the detection of 511 keV gamma rays, which are prominent in the active background when neutrons are being produced. Alternatives, such as 79m Br produced by inelastic neutron scattering on 79 Br, are limited by short half-life, low-energy gamma emission, and inability to selectively measure D–T neutrons. This work describes a novel alternative approach to measure ≳10 MeV neutron fields based on self-activation analysis of a LaBr 3 :Ce detector. The activity of 78 Br, the activation product of the 79 Br(n,2n) 78 Br reaction, is used to determine the neutron flux and infer the neutron production rate. We experimentally demonstrate the method with a cylindrical LaBr 3 :Ce crystal with a diameter and height of 3.81 cm that was placed at an ~18 cm distance from the neutron production point, at a 90° angle with respect to the deuteron beam in a D–T neutron generator. Operating voltage and current of the generator were adjusted to evaluate the technique’s performance over a nominal generator output range of approximately (1 - 9) x 10 7 n/s. The neutron output obtained from LaBr 3 :Ce activation agrees to within three standard deviations of the output obtained using copper activation. The self-activation technique can be conveniently employed in a variety of applications to simplify measurements of fast neutrons produced in D–T fusion reactions.

Active interrogationLaBr3↗

Proof-of-concept chemometric approach for environmental forensic sourcing of crude oil samples using SPME-GC-MS

Environmental exposure to crude oil through seepage and spillage poses risks to the immediate environment and the broader ecosystem as areas along the oil distribution path are affected by the influx of crude petroleum as well as the environmental, economic, and civil unrest that accompanies it. There is a large financial burden associated with the lost resources, including the cost of rehabilitation, and the affected sources of revenue for communities affected by oil spills. As such, it is crucial to determine the responsible parties. This work outlines an environmental forensics approach to determining the source of an un-weathered crude oil sample. The researchers employed solid phase microextraction coupled with gas chromatography mass spectrometry (SPME-GC-MS) to capture and analyze the gaseous components emitted by crude oil samples sourced from five locations. Samples were analyzed using Spearman's rank correlation and 3D covariance analysis. Both chemometric approaches yielded optimal performance results with no misclassifications, true positive rate (TPR) = 100 % and false positive rate (FPR) = 0 %. The similarity metrics calculated by each test noted clear delineations between the values of same-source and differently sourced samples. The Spearman's rank correlation test and 3D covariance calculations both demonstrated the ability to correctly identify sample source origin in this dataset. Finally, the authors outline an approach to the future application of these tests and suggest their joint use in future crude oil sourcing endeavors.

3D covariance mapping↗

Microyielding of core-shell crystal dendrites in a bulk-metallic-glass matrix composite

In-situ synchrotron x-ray experiments have been used to follow the evolution of the diffraction peaks for crystalline dendrites embedded in a bulk metallic glass matrix subjected to a compressive loading-unloading cycle. We observe irreversible diffraction-peak splitting even though the load does not go beyond half of the bulk yield strength. The chemical analysis coupled with the transmission electron microscopy mapping suggests that the observed peak splitting originates from the chemical heterogeneity between the core (major peak) and the stiffer shell (minor peak) of the dendrites. A molecular dynamics model has been developed to compare the hkl -dependent microyielding of the bulk metallic-glass matrix composite. As a result, the complementary diffraction measurements and the simulation results suggest that the interfaces between the amorphous matrix and the (211) crystalline planes relax under prolonged load that causes a delay in the reload curve which ultimately catches up with the original path.

36 MATERIALS SCIENCE↗

Surface studies of solids using integral x-ray-induced photoemission yield

X-ray induced photoemission yield contains structural information complementary to that provided by X-ray Fresnel reflectivity, which presents an advantage to a wide variety of surface studies if this information is made easily accessible. Photoemission in materials research is commonly acknowledged as a method with a probing depth limited by the escape depth of the photoelectrons. Here we show that the integral hard-X-ray-induced photoemission yield is modulated by the Fresnel reflectivity of a multilayer structure and carries structural information that extends well beyond the photoelectron escape depth. A simple electric self-detection of the integral photoemission yield and Fourier data analysis permit extraction of thicknesses of individual layers. The approach does not require detection of the reflected radiation and can be considered as a framework for non-invasive evaluation of buried layers with hard X-rays under grazing incidence.

36 MATERIALS SCIENCE↗

Non-thermal atmospheric pressure plasma–liquid synthesis of organic acids in aqueous solution from carbon monoxide

This work aims at understanding the conversion of CO to organic acids, namely oxalic acid and formic acid, using non-thermal atmospheric pressure plasma over aqueous solutions. CO exhibited significantly higher conversion to organic acids (more than 15×) compared to CO 2 under the same reaction conditions. The result bolsters a proposed two-step process for CO 2 fixation, whereby CO 2 is first converted to CO, and then CO is converted to organic acids. The organic acids produced from CO are intermediates in the water–gas shift (WGS) reaction of CO in the presence of an aqueous solution to dissolved CO 2 and hydrogen gas. Based on a simple thermodynamic analysis, the organic acid yield was increased by lowering the plasma–liquid reaction temperature using an ice bath to cool the reaction flask. The composition of the organic acids could be varied by changing the pH of the solution. Oxalate was formed in higher concentrations with increasing solution pH above the pK a of the radical species (CO 2 )˙ − . Below the pK a value, formate was the exclusive organic acid formed. The production of formate has a rather weak pH dependence but is enhanced slightly at a basic pH above 10. Furthermore, at basic pH, the effect of electrolyte concentration comes into play. Higher electrolyte concentrations, leading to shorter electrolyte Debye lengths, resulted in lowered organic acid yields. The highest yields of organic acids obtained in our system were 122 mg L −1 for oxalate and 77 mg L −1 for formate at an optimum 1 mM NaOH concentration in the starting solution. This work is a successful pioneering example of CO to organic acids conversion using non-thermal plasmas, which opens the pathway for a promising two-step conversion process of CO 2 to organic acids.

Sudagar, Alcina Johnson [Washington University in ↗

NA48/2 Results and NA62 Perspectives

Recent results on rare and radiative {Kappa}{sup {+-}} decays from the NA48/2 experiment are reported. Among many rare decay modes, the analysis of {Kappa}{sup {+-}}{yields}{pi}{sup +}{pi}{sup -}e{sup {+-}}{nu} ({Kappa}{sub e4}) decays allows a quasi model-independent approach to the study of low energy {pi}{pi} scattering. With more than 1 million {Kappa}{sub e4} decays the form factors and their energy dependence are measured with an improved precision. In the channel {Kappa}{sup {+-}}{yields}{pi}{sup {+-}}{pi}{sup 0}{gamma} more than 1 million decays were reconstructed, leading to the first measurement of the interference between direct photon emission and inner bremsstrahlung contributions as well as new limits on CP violation. For {Kappa}{sup {+-}}{yields}{pi}{sup {+-}}{gamma}{gamma}, a precise measurement of the branching fraction was performed, based on more than 1000 events. In addition the perspectives of NA62 to measure the branching ratio of the very rare kaon decay {Kappa}{sup +}{yields}{pi}{sup +}{nu}{nu} at the CERN SPS are described.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Recent Results from CLEO

The CLEO Experiment, utilizing symmetric e{sup +}e{sup -} collisions provided by the Cornell Electron Storage Ring (CESR) in the charmonium and bottomonium regions, has a wide-reaching program in the study of hadrons and the strong force. This review briefly summarizes recent contributions the CLEO Collaboration has made in the study of: (1) light quark systems (rare decays of the {eta}'); (2) charmonium radiative decays to light quarks (J/{psi} and {psi}(2S) radiative decays to the {eta} and {eta}'); (3) mesons with open charm (the D and D{sub s} decay constants); (4) charmonium transitions (a multipole analysis of {psi}(2S) {yields} {gamma}{chi}{sub c1,2} and {chi}{sub c1,2} {yields} {gamma}J/{psi}); and (5) bottomonium spectroscopy (confirming evidence for the discovery of the {eta}{sub b}(1S)).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

N* production from pp and p-barp collisions

With an effective Lagrangian approach, we give a full analysis on the NN{yields}NN{pi}{pi} and pp{yields}pn{pi}{sup +} reactions for proton beam energy from 1 to 1.5 GeV. The results are very consistent with the experiment data from CELSIUS, KEK, COSY, and so on. Based on these results, we consider the N-barN{yields}N-barN{pi}{pi} and p-barp{yields}p-barn{pi}{sup +} for proton beam energy up to 4 GeV. Compare to the pp collisions, there are many benefits to study N* resonances in these two reactions. And for the high proton beam energy up to 15 GeV, we consider some new resonances with hidden charm which are definitely beyond three constituent quarks model in the p-barp{yields}p-barpJ/{psi} and p-barp{yields}p-barp{eta}{sub c}, where there are very nice places to find these new N{sub cc}-bar*. The predicted results about p-barp collisions can be looked for at the forthcoming PANDA/FAIR experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Photo-fusion reactions in a new compact device for ELI

In the last few years significant progress on technological, experimental and numerical studies on fusion process in high density and high temperature plasmas produced by a high intensity laser pulse interaction with clusters in a high external applied magnetic field, enable us to propose a compact photo-fusion magnetic device for high neutron production. For the purpose of the project a pulsed magnetic field driver with values up to 110 Tesla has been developed which allows increasing the trapping time of the high density plasma in the device and improving the neutron yield. Numerical simulations show that the proposed device is capable of producing up to 10{sup 9}-10{sup 10} neutrons per laser shot with an external magnetic field of 150 Tesla. The proposed device can be used for experiments and numerical code validation concerning different conventional and (or) exotic fusion fuels.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Rotationally resolved state-to-state photoelectron study of niobium carbide radical

By employing the two-color visible (VIS)-ultraviolet (UV) laser photoexcitation scheme and the pulsed field ionization-photoelectron (PFI-PE) detection, we have obtained rovibronically selected and resolved photoelectron spectra for niobium carbide cation (NbC{sup +}). The fully rotationally resolved state-to-state VIS-UV-PFI-PE spectra thus obtained allow the unambiguous assignments of rotational photoionization transitions, indicating that the electronic configuration and term symmetry of NbC{sup +}(X{sup ~}) ground state are …10σ{sup 2} 5π{sup 4} 11σ{sup 2} (X{sup ~1}Σ{sup +}). Furthermore, the rotational analysis of these spectra yields the ionization energy of NbC [IE(NbC)] to be 56 369.2 ± 0.8 cm{sup −1} (6.9889 ± 0.0001 eV) and the rotation constant B{sub 0}{sup +} = 0.5681 ± 0.0007 cm{sup −1}. The latter value allows the determination of the bond distance r{sub 0}{sup +} = 1.671 ± 0.001 Å for NbC{sup +}(X{sup ~1}Σ{sup +}). Based on conservation of energy, the IE(NbC) determined in the present study along with the known IE(Nb) gives the difference of 0 K bond dissociation energies (D{sub 0}’s) for NbC{sup +} and NbC, D{sub 0}(NbC{sup +}) − D{sub 0}(NbC) = −1855.4 ± 0.9 cm{sup −1} (−0.2300 ± 0.0001 eV). The energetic values and the B{sub 0}{sup +} constant determined in this work are valuable for benchmarking state-of-the-art ab initio quantum calculations of 4d transition metal-containing molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development and evaluation of a device for simultaneous uniaxial compression and optical imaging of cartilage samples in vitro

In this paper, we present a system that allows imaging of cartilage tissue via optical coherence tomography (OCT) during controlled uniaxial unconfined compression of cylindrical osteochondral cores in vitro. We describe the system design and conduct a static and dynamic performance analysis. While reference measurements yield a full scale maximum deviation of 0.14% in displacement, force can be measured with a full scale standard deviation of 1.4%. The dynamic performance evaluation indicates a high accuracy in force controlled mode up to 25 Hz, but it also reveals a strong effect of variance of sample mechanical properties on the tracking performance under displacement control. In order to counterbalance these disturbances, an adaptive feed forward approach was applied which finally resulted in an improved displacement tracking accuracy up to 3 Hz. A built-in imaging probe allows on-line monitoring of the sample via OCT while being loaded in the cultivation chamber. We show that cartilage topology and defects in the tissue can be observed and demonstrate the visualization of the compression process during static mechanical loading.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗