Search NASA⌕ Search

SEARCH · Search NASA

Results for “Additive decomposition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

EBS Report - LANL Experimental update of buffer/backfill at elevated P,T

The Used Fuel Disposition campaign is presently investigating various generic repository options for disposal of used fuel. Of interest are the disposal of high heat load canisters (up to 300 °C), which may allow for a reduced repository footprint. The focus of this experimental work is to increase our understanding on the stability of bentonite barriers under different geochemical and mineralogical conditions other than what has been previously investigated. Experiments were performed at 150 – 160 bars at temperatures up to 300 °C for five to six weeks. Unprocessed Wyoming bentonite was saturated with a K-Ca-Na-Cl-rich water at a 9:1 water:rock ratio. Experiments contained various steel plates or Cu-foil and were buffered to low Eh conditions using magnetite and metallic iron. Other experiments for international EBS research included mixed buffers and a heated bentonite with 20 wt. % free moisture for LBNL. The mixed buffer experiments (bentonite-graphite, bentonite-quartz sand) were conducted to investigate potential mineralogic/petrologic changes to mixed buffer systems proposed by the German nuclear repository program. Reaction products associated with the international EBS research were characterized by LANL with thermal-mechanical properties to be characterized by LBNL. The pH, K + , and Ca 2+ concentrations dropped, while SiO 2(aq) , Na + , and SO 4 2- concentrations increased throughout the experiments. The alkali and alkaline earth metals aqueous concentrations appear to be buffered via the montmorillonite and clinoptilolite exchange reactions. Illite or illite/smectite mixed-layer formation is significantly retarded in the closed system due to Na+ and SiO2(aq) accumulation and limited K + supply. Precursor clinoptilolite underwent extensive dissolution during the six week, 300 °C experiments subsequently producing a high-silicon analcime in addition to authigenic silica phases. Analcime and feldspar formation partially sequesters aqueous Al 3+ , thereby potentially inhibiting illitization. Associated with the zeolite alteration is a ~ 17 % volume decrease (assuming quartz formation) that translates into ~ 2% volume loss in the bulk bentonite. Pyrite decomposition is first observed at ~210 °C, generating available H 2 S (aq,g) that reacts with metal plates or evolves as a gas. The copper rapidly degrades in the presence of H 2 S (aq,g) , resulting in the formation of a chalcocite crust on the copper. A layer of Fe-saponite (or rarely, chlorite) forms at the steel bentonite interface, potentially acting as a passivating agent to retard further metal corrosion. Zeolite mineralogy alteration, metal-bentonite interface reactions, and illitization retardation under these experimental repository conditions are important considerations for the long-term stability evaluation of a used fuel repository.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Antifoam Degradation Products in Off Gas and Condensate of Sludge Batch 9 Simulant Nitric-Formic Flowsheet Testing for the Defense Waste Processing Facility

Ten chemical processing cell (CPC) experiments were performed using simulant to evaluate Sludge Batch 9 for sludge-only and coupled processing using the nitric-formic flowsheet in the Defense Waste Processing Facility (DWPF). Sludge Receipt and Adjustment Tank (SRAT) and Slurry Mix Evaporator (SME) cycles were performed on eight of the ten. The other two were SRAT cycles only. Samples of the condensate, sludge, and off gas were taken to monitor the chemistry of the CPC experiments. The Savannah River National Laboratory (SRNL) has previously shown antifoam decomposes to form flammable organic products, (hexamethyldisiloxane (HMDSO), trimethylsilanol (TMS), and propanal), that are present in the vapor phase and condensate of the CPC vessels. To minimize antifoam degradation product formation, a new antifoam addition strategy was implemented at SRNL and DWPF to add antifoam undiluted.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

An introduction to the theory and use of SESAME equations of state

This paper details aspects of the three-component, Helmholtz free energy, equation of state (EOS) model that serves as the construction basis for the majority of the tabular equations of state residing in the SESAME database. The three components account for contributions to the total free energy from the cold curve (or zero Kelvin isotherm), the nuclear vibrational excitations, and the thermal electronic excitations. Decomposition of the model into these three components is a consequence of the underlying theoretical framework describing materials in the condensed matter phase since each of the free energy components directly correspond to a term in the condensed matter system Hamiltonian. In addition to providing an introduction to the theoretical basis of the three-component model and an account of the empirical data utilized to construct an EOS, the aim of this paper is to enable readers to evaluate the applicability of a particular EOS within the context of a problem they are solving by reviewing the thermodynamic phase space in which it has been appropriately constrained. This paper does not aim to serve as an exhaustive documentation of the various methods used in construction of the SESAME tables. Instead, it focuses on the models used during the construction of a particular EOS for aluminum performed by Sjostrom et al. [SCR16] as an illustrative example.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Response of Explosives to Accidental Stimuli

This brief discussion of the non-shock response of explosives is intended to introduce the reader to the basic concepts involved, and as additional reading to a live class on the subject. Explosives are generally designed to detonate – a specific kind of explosion in which a shock wave – a supersonic discontinuity in pressure, density and particle velocity – passes through the material and triggers fast chemical decomposition, liberating energy that is available to support the shock wave which would otherwise die out. The result may perhaps be usefully visualized as a rocket-propelled shock wave. Ideally, an explosive would detonate reliably when required while behaving as an inert material in all other circumstances. Modern engineered explosives, such as those used in nuclear weapons, largely meet the first criterion but fail the second because, even though they are very difficult to detonate unintentionally, they also exhibit non-detonative energetic decomposition responses to accidental stimuli that can range from mild to very violent. There are two distinct elements to a full understanding of this regime of behavior: 1. How do accidental stimuli cause the onset of decomposition? 2. What determines the violence of the ensuing reaction? In order to understand these elements, we must first consider the full range of behaviors of commonly used explosives. This course is intended to introduce the student to the basic concepts and to encourage further reading on the subject.

42 ENGINEERING↗

Investigations on RELAP5-3D to RELAP5-3D coupling methodology by PVMEXEC

In the framework of a BEPU (Best Estimate Plus Uncertainty) approach within the licensing process of a nuclear power plant, the need to extend the resources of nuclear system thermal-hydraulics codes, such as RELAP5-3D, arises to allow more detailed simulations of the complex 3D reality of Nuclear Power Plants (NPPs), either under normal steady-state or during various accident scenarios. Currently, it is not possible to achieve the same degree of detail for a whole nuclear system when it is simulated with RELAP5-3D and this is due to the inherent limitations in the number of components and volumes to be used for the analysis. For this reason, it is of extreme interest the use of tools for codes coupling that enable the use of different codes for the simulation of different portions of a system in a unified analysis. In this paper the attention will be focused on the decomposition of the thermal-hydraulic domain of a system into subsystems to be simulated by different instances of the same code (e.g. RELAP5-3D) coupled together by means of PVMEXEC program and parallel virtual machine (PVM) technology. Explicit and semi-implicit solution algorithms were used for the analyses. Among the analyzed cases, the following will be discussed in detail with the aim to provide additional guidelines for the use of the PVMEXEC tool: (i) the Edward's pipe blowdown test, (ii) a simplified countercurrent heat exchanger, (iii) different hydraulics and heat structure coupling schemes for a shell-tube heat exchanger and (iv) a three-task coupled model of an adaptation of the Christensen subcooled boiling experiment. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Novel Y doped Bi{sub 2}WO{sub 6} photocatalyst: Hydrothermal fabrication, characterization and enhanced visible-light-driven photocatalytic activity for Rhodamine B degradation and photocurrent generation

Visible-light-driven (VLD) Yttrium (Y) ion doped Bi{sub 2}WO{sub 6} photocatalyst has been synthesized via a facile hydrothermal route. Incorporation of Y{sup 3} {sup +} into Bi{sub 2}WO{sub 6} lattice was successfully confirmed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and ICP analysis. The microstructure and optical property of the as-prepared samples have been characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption–desorption isotherm and UV–vis diffuse reflectance spectra (DRS). The photocatalytic experiments indicated that the Y-Bi{sub 2}WO{sub 6} showed a much higher photocatalytic activity than the pristine Bi{sub 2}WO{sub 6} for the degradation of Rhodamine B (RhB) and photocurrent (PC) generation. This enhancement should be ascribed to the slightly increased band gap and the generated defects by Y{sup 3} {sup +} doping, thus resulting in a much lower recombination rate of the photoinduced electrons and holes. Such a process was verified by the photoluminescence (PL) spectroscopy. In addition, the active species trapping experiments indicated that holes (h{sup +}) and superoxide radicals (·O{sub 2}{sup −}) play important roles in the photocatalytic reaction. - Highlights: • Novel Y-Bi{sub 2}WO{sub 6} photocatalyst has been synthesized by a facile hydrothermal route. • Y-Bi{sub 2}WO{sub 6} exhibits a much higher photocatalytic activity than pristine Bi{sub 2}WO{sub 6}. • Holes (h{sup +}) and superoxide radicals (·O{sub 2}{sup −}) are the two main active species. • Y{sup 3} {sup +} ion can result in a low recombination of photogenerated electron and hole.

36 MATERIALS SCIENCE↗

Enhancing the performance of lithium oxygen batteries through combining redox mediating salts with a lithium protecting salt

Li–O 2 batteries have recently emerged to meet nowadays elevated electric energy demands. Redox mediators (RMs) for solution-inducing decomposition of discharge products are one approach to increase energy efficiency and reduce high overpotentials in these batteries. However, multiple obstacles hinder their usage such as redox shuttling, capacity fading, electrolyte degradation, etc. Herein, we present a new chemistry based on a combination of LiNO 3 , TEGDME and an ionic liquid that enables LiI (1 M) to lower the charge potential (3.5V) with a long cycle life of 270 cycles. 0.1 M LiI increases the cyclability up to 500 with a slightly increased charge potential (~4V) for a fixed capacity of 1000 mAh/g. Up to 100 cycles, this battery system retained ~95% Li 2 O 2 capacity with a ~0.8 V charge-discharge polarization gap. The addition of LiNO 3 to the electrolyte provides a protective solid electrolyte interface (SEI) on anode that works in synergy with the LiI RM. Moreover, we found that this electrolyte blend results in domain formation of ionic and neutral species enhancing the discharge and charge processes. Finally, DFT calculations provide a better understanding of the role of the anode SEI layer and the Li 2 O 2 decomposition promoted by the LiI during charge on the cathode.

25 ENERGY STORAGE↗

Microwave-Assisted Conversion of Low Rank Coal under Methane Environment

Addition of methane during microwave coal pyrolysis could greatly affect the product distribution to valuable products including the formation of char. Here in this work, low rank coal was exposed to microwave energy in the presence of different methane concentrations (0, 25, 50, and 90%) at 980 °C for 2 h. Increasing methane concentration was found to increase both the char and tar yields mainly due to carbon deposition during methane decomposition and hydrogenation of trapped carbon into tars. Analysis of the gas composition suggested that some of the methane was activated in the presence of the coal minerals, which could act as a catalyst, forming light hydrocarbons C 2 –C 7 which account for up to 5% of the gaseous products at a methane concentration of 90%; they accounted for less than 0.5% in the absence of methane. Methyl groups may also have been substituted into aromatic compounds as observed in the tar analysis where the number of methyl substitutions in the detected parent phenol and naphthalene increased with methane concentration. Tar yield could also increase indirectly with methane addition through hydrogenation reactions with unsaturated coal compounds. The formation of char under different methane concentrations was examined by many characterization tools including Raman, dielectric properties, XRD, BET, SEM, and EDS. The results suggest that the addition of methane did not help in forming ordered carbon chars, not only due to amorphous carbon deposition on the char surface but also due to hydrogenation or alkylation reactions with char. The presence of methane enhanced the formation of C 2 s and benzene; a possible correlation between the formation rate of benzene and hydrogen during pyrolysis is proposed.

01 COAL, LIGNITE, AND PEAT↗

Automated thermal extraction-desorption gas chromatography mass spectrometry: A multifunctional tool for comprehensive characterization of polymers and their degradation products

The TED-GC–MS analysis is a two-step method. A sample is first decomposed in a thermogravimetric analyzer (TGA) and the gaseous decomposition products are then trapped on a solid-phase adsorber. Subsequently, the solid-phase adsorber is analyzed with thermal desorption gas chromatography mass spectrometry (TDU-GC–MS). This method is ideally suited for the analysis of polymers and their degradation processes. A new entirely automated system is introduced which enables high sample throughput and reproducible automated fractioned collection of decomposition products. The fractionated collection together with low temperatures reduces the risk of contamination, improves instrumental stability and minimizes maintenance efforts. Through variation of the two main parameters (purge gas flow and heating rate) it is shown how the extraction process can be optimized. By measuring the decomposition products of polyethylene it is demonstrated that compounds with masses of up to 434 Da can be detected. This is achieved despite the low temperature (˜40 °C) of the solid-phase adsorber and the low thermal desorption temperature of 200 °C in the TDU unit. It is now shown that automated TED-GC–MS represents a new flexible multi-functional method for comprehensive polymer analyses. Comparable polymer characterization was previously only achievable through a combination of multiple independent analytical methods. This is demonstrated by three examples focused on practical challenges in materials analysis and identification: The first one is the analysis of wood plastic composites for which the decomposition processes of the polymer and the bio polymer (wood) could be clearly distinguished by fractionated collection using sequential adsorbers. Secondly, a fast quantitative application is shown by determining the weight concentrations of an unknown polyolefin blend through comparison with a reference material. Additionally, the determination of microplastic concentrations in environmental samples is becoming an increasingly important analytical necessity. It is demonstrated that with TED-GC–MS calibration curves showing good linearity for the most important precursors for microplastic, even complex matrix materials (suspended particulate matter) can be successfully analyzed.

36 MATERIALS SCIENCE↗

Formation Mechanisms of Naphthalene and Indene: From the Interstellar Medium to Combustion Flames

The article addresses the formation mechanisms of naphthalene and indene, which represent prototype polycyclic aromatic hydrocarbons (PAH) carrying two six-membered and one five- plus a six-membered ring. Theoretical studies of the relevant chemical reactions are overviewed in terms of their potential energy surfaces, rate constants, and product branching ratios; these data are compared with experimental measurements in crossed molecular beams and the pyrolytic chemical reactor emulating the extreme conditions in the interstellar medium (ISM) and the combustion-like environment, respectively. The outcome of the reactions potentially producing naphthalene and indene is shown to critically depend on temperature and pressure or collision energy and hence the reaction mechanisms and their contributions to the PAH growth can be rather different in the ISM, planetary atmospheres, and in combustion flames at different temperatures and pressures. Specifically, this paradigm is illustrated with new theoretical results for rate constants and product branching ratios for the reaction of phenyl radical with vinylacetylene. The analysis of the formation mechanisms of naphthalene and its derivatives shows that in combustion they can be produced via hydrogen-abstraction-acetylene-addition (HACA) routes, recombination of cyclopentadienyl radical with itself and with cyclopentadiene, the reaction of benzyl radical with propargyl, methylation of indenyl radical, and the reactions of phenyl radical with vinylacetylene and 1,3-butadiene. In extreme astrochemical conditions, naphthalene and dihydronaphthalene can be formed in the C 6 H 5 + vinylacetylene and C 6 H 5 + 1,3-butadiene reactions, respectively. Ethynyl-substituted naphthalenes can be produced via the ethynyl addition mechanism beginning with benzene (in dehydrogenated forms) or with styrene. The formation mechanisms of indene in combustion include the reactions of the phenyl radical with C 3 H 4 isomers allene and propyne, reaction of the benzyl radical with acetylene, and unimolecular decomposition of the 1-phenylallyl radical originating from 3-phenylpropene, a product of the C 6 H 5 + propene reaction, or from C 6 H 5 + C 3 H 5 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Smart Materials Behavior in Phosphates: Role of Hydroxyl Groups and Relevance to Antiwear Films

The elastic properties of materials under high pressure are relevant to the understanding and performance of many systems of current interest, for example, in geology and tribology. Of particular interest is the origin of the dramatic increase in modulus with increasing pressure, a response which is also called 'smart materials behavior.' In this context, simple phosphate-containing materials have been studied experimentally and theoretically, and the origins of this behavior have been associated with factors such as coordination of the cations and changes in the degree of polymerization and hydrogenation of the phosphate units. In the present paper we extend the former analysis on simple metal phosphate model compounds to so-called thermal films, an intermediate stage in the formation of effective antiwear films. The material was produced by heating a commercial zinc dialkyldithiophosphate (ZDDP), a common antiwear additive in lubricating oils, in poly-?-olefin base oil solutions to 150 degrees C, a process known to produce the thermal films. Its structure and equation of state were studied by means of x-ray diffraction and IR synchrotron radiation techniques during compression up to 25 GPa in a diamond anvil cell as well as during the subsequent decompression. As is the case for the simple metal phosphates, we find that the thermal films are relatively soft at low pressures but stiffen rapidly and ultimately amorphize irreversibly at high pressure. However, in addition to phase transformations involving cation sites occurring in the metal phosphates studied previously, thermal films undergo displacive transitions associated with instabilities of the hydroxyl groups. These results may imply that ZDDP ligands and those of the transformed materials not only affect ZDDP decomposition rate in engines but also the mechanical properties of the resulting antiwear films.

43 PARTICLE ACCELERATORS↗

Formation of Pd nanocrystals in titanium-oxide film by rapid thermal annealing of reactively cosputtered TiPdO films

In this article, the authors report a novel method for preparation of Pd nanocrystals embedded in TiO{sub 2} film; i.e., the TiPdO films are first deposited by reactively cosputtering Ti and Pd targets in a plasma mixture of O{sub 2} and Ar, followed by rapid thermal annealing (RTA). The experimental results indicate that the TiPdO film with a high content of Pd is inclined to produce big nanocrystals. Furthermore, the higher the RTA temperature, the bigger the Pd nanocrystals become. In addition, our analyses of the x-ray photoelectron spectroscopy spectra reveal that PdO, PdO{sub 2}, Ti{sub 2}O{sub 3}, and TiO{sub 2} coexist in the as-deposited film, and the RTA at 600 deg. C leads to decomposition of the entire PdO{sub 2} and partial PdO, together with the growth of Pd nanocrystals. At the same time, the released oxygen oxidizes fully Ti{sub 2}O{sub 3} into TiO{sub 2} during the decomposition. As the RTA temperature is increased up to 900 deg. C, more and more PdO is decomposed and the Pd nanocrystals become bigger and bigger.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DT-HYDRO

The software solves the time dependent, one dimensional (1D) coupled mass and momentum balance equations governing the elastic flow of water through the penstock, turbine and draft tube in a hydroelectric facility using a high order finite volume based method. The numerical method is based on the Kurganov-Tadmor central method paired with the Monotonic Upstream-centered Scheme for Conservation Laws (MUSCL). This solution method accurately resolves the fast transient behavior of the flow, including water hammer. Additionally, the software estimates the full 3D flow field within the turbine chamber in real time, a feat that is made possible by leveraging pre-computed CFD results by utilizing a reduced order modeling method based on an efficient randomized singular value decomposition (SVD) driven proper orthogonal decomposition (POD) with POD-mode weight regression. The reduced order model of the 3D flow is directly coupled to the 1D elastic flow model so the entire flow field through the penstock and turbine system is resolved quickly and with high fidelity.

Gurecky, William [Oak Ridge National Laboratory (O↗

Biogeochemical modeling of CO 2 and CH 4 production in anoxic Arctic soil microcosms

Abstract. Soil organic carbon turnover to CO2 and CH4 is sensitive to soil redox potential and pH conditions. However, land surface models do not consider redox and pH in the aqueous phase explicitly, thereby limiting their use for making predictions in anoxic environments. Using recent data from incubations of Arctic soils, we extend the Community Land Model with coupled carbon and nitrogen (CLM-CN) decomposition cascade to include simple organic substrate turnover, fermentation, Fe(III) reduction, and methanogenesis reactions, and assess the efficacy of various temperature and pH response functions. Incorporating the Windermere Humic Aqueous Model (WHAM) enables us to approximately describe the observed pH evolution without additional parameterization. Although Fe(III) reduction is normally assumed to compete with methanogenesis, the model predicts that Fe(III) reduction raises the pH from acidic to neutral, thereby reducing environmental stress to methanogens and accelerating methane production when substrates are not limiting. The equilibrium speciation predicts a substantial increase in CO2 solubility as pH increases, and taking into account CO2 adsorption to surface sites of metal oxides further decreases the predicted headspace gas-phase fraction at low pH. Without adequate representation of these speciation reactions, as well as the impacts of pH, temperature, and pressure, the CO2 production from closed microcosms can be substantially underestimated based on headspace CO2 measurements only. Our results demonstrate the efficacy of geochemical models for simulating soil biogeochemistry and provide predictive understanding and mechanistic representations that can be incorporated into land surface models to improve climate predictions.

54 ENVIRONMENTAL SCIENCES↗

A reduced-order modeling approach to represent subgrid-scale hydrological dynamics for land-surface simulations: application in a polygonal tundra landscape

Existing land surface models (LSMs) describe physical and biological processes that occur over a wide range of spatial and temporal scales. For example, biogeochemical and hydrological processes responsible for carbon (CO 2 , CH 4 ) exchanges with the atmosphere range from the molecular scale (pore-scale O 2 consumption) to tens of kilometers (vegetation distribution, river networks). Additionally, many processes within LSMs are nonlinearly coupled (e.g., methane production and soil moisture dynamics), and therefore simple linear upscaling techniques can result in large prediction error. In this paper we applied a reduced-order modeling (ROM) technique known as "proper orthogonal decomposition mapping method" that reconstructs temporally resolved fine-resolution solutions based on coarse-resolution solutions. We developed four different methods and applied them to four study sites in a polygonal tundra landscape near Barrow, Alaska. Coupled surface–subsurface isothermal simulations were performed for summer months (June–September) at fine (0.25 m) and coarse (8 m) horizontal resolutions. We used simulation results from three summer seasons (1998–2000) to build ROMs of the 4-D soil moisture field for the study sites individually (single-site) and aggregated (multi-site). The results indicate that the ROM produced a significant computational speedup (> 10 3 ) with very small relative approximation error (< 0.1%) for 2 validation years not used in training the ROM. We also demonstrate that our approach: (1) efficiently corrects for coarse-resolution model bias and (2) can be used for polygonal tundra sites not included in the training data set with relatively good accuracy (< 1.7% relative error), thereby allowing for the possibility of applying these ROMs across a much larger landscape. By coupling the ROMs constructed at different scales together hierarchically, this method has the potential to efficiently increase the resolution of land models for coupled climate simulations to spatial scales consistent with mechanistic physical process representation.

Pau, G. S. H.↗

A massively parallel semi-Lagrangian algorithm for solving the transport equation

The scalar transport equation underpins many models employed in science, engineering, technology and business. Application areas include, but are not restricted to, pollution transport, weather forecasting, video analysis and encoding (the optical flow equation), options and stock pricing (the Black-Scholes equation) and spatially explicit ecological models. Unfortunately finding numerical solutions to this equation which are fast and accurate is not trivial. Moreover, finding such numerical algorithms that can be implemented on high performance computer architectures efficiently is challenging. In this paper the authors describe a massively parallel algorithm for solving the advection portion of the transport equation. We present an approach here which is different to that used in most transport models and which we have tried and tested for various scenarios. The approach employs an intelligent domain decomposition based on the vector field of the system equations and thus automatically partitions the computational domain into algorithmically autonomous regions. The solution of a classic pure advection transport problem is shown to be conservative, monotonic and highly accurate at large time steps. Additionally we demonstrate that the algorithm is highly efficient for high performance computer architectures and thus offers a route towards massively parallel application.

54 ENVIRONMENTAL SCIENCES↗

Phenolic acid-degrading Paraburkholderia prime decomposition in forest soil

Abstract Plant-derived phenolic acids are catabolized by soil microorganisms whose activity may enhance the decomposition of soil organic carbon (SOC). We characterized whether phenolic acid-degrading bacteria enhance SOC mineralization in forest soils when primed with 13C-labeled p-hydroxybenzoic acid (pHB). We further tested whether pHB-induced priming could explain differences in SOC content among mono-specific tree plantations in a 70-year-old common garden experiment. pHB addition primed significant losses of SOC (3–13 µmols C g−1 dry wt soil over 7 days) compared to glucose, which reduced mineralization (-3 to -8 µmols C g−1 dry wt soil over 7 days). The principal degraders of pHB were Paraburkholderia and Caballeronia in all plantations regardless of tree species or soil type, with one predominant phylotype (RP11ASV) enriched 23-fold following peak pHB respiration. We isolated and confirmed the phenolic degrading activity of a strain matching this phylotype (RP11T), which encoded numerous oxidative enzymes, including secretion signal-bearing laccase, Dyp-type peroxidase and aryl-alcohol oxidase. Increased relative abundance of RP11ASV corresponded with higher pHB respiration and expression of pHB monooxygenase (pobA), which was inversely proportional to SOC content among plantations. pobA expression proved a responsive measure of priming activity. We found that stimulating phenolic-acid degrading bacteria can prime decomposition and that this activity, corresponding with differences in tree species, is a potential mechanism in SOC cycling in forests. Overall, this study highlights the ecology and function of Paraburkholderia whose associations with plant roots and capacity to degrade phenolics suggest a role for specialized bacteria in the priming effect.

54 ENVIRONMENTAL SCIENCES↗