Search NASA⌕ Search

SEARCH · Search NASA

Results for “BURNING PROCESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Experimental Results for Large Particle Separation from Non-Newtonian Slurries Using Tapered Bump Arrays

Lateral displacement arrays are useful for separating particles such as blood cells and sand from carrier fluids. These arrays consist of staggered posts, which allow smaller particles to follow streamlines and larger particles to flow around the posts and migrate to one side. This migration increases the particle concentration in one direction and depletes the particle concentration in the other direction allowing particle separation to occur. Experiments were conducted to separate large particles in non-Newtonian yield stress slurries using tapered bump arrays. The non-Newtonian slurry used was composed of a bentonite kaolin blend with the inclusion of larger diameter particles. These experiments were conducted to evaluate the performance of particle separation using a tapered array of staggered posts as configured in a bump array for non-Newtonian yield stress slurries, an application that has not been explored experimentally. A theory for large particle separation was developed for slurries that exhibit Bingham or Cross rheology. The results of these experiments are described. This information could be applied in industrial settings such as separation of particles from nuclear waste slurries including those to be processed at the Hanford site, where removing large particles from waste streams is important to processing.

slurry, solids removal, deterministic lateral disp↗

Comparing Experimental Results for Large Particle Separation from Non-Newtonian Slurries Using Full and Tapered Bump Arrays

To separate particles from carrier fluids arrays of staggered posts inserted into the flow stream can be employed. The smaller particles follow the flow stream while the larger particles move laterally to one side. During flow, the concentration of particulate increases in one direction and decreases in the other crosswise direction. This technique separates the particles from the carrier fluid. Experiments using a slurry with non-Newtonian rheology were conducted to evaluate large particle separation from the non-Newtonian carrier fluid using bump arrays. The bentonite kaolin clay slurry with non-Newtonian rheology was spiked with large diameter inert glass particles. Experiments with flow through lateral displacement arrays evaluated the performance of particle separation using two array configurations: a full array with all posts and a tapered array with posts removed in a triangular portion of the array past the rows of anticipated particle of separation. The posts are staggered posts to promote particle segregation to one side of the flow channel. Using this type of array for removing particles from non-Newtonian yield stress slurries is novel and we present unique results. In this paper, the performance of full and tapered arrays are compared. These results have many industrial applications including removing particles from slurries of nuclear waste. Large particle removal is an important step in waste processing.

slurry, solids removal, deterministic lateral disp↗

Positron-electron pairs in astrophysics; Proceedings of the Workshop, Greenbelt, MD, January 6-8, 1983

Astrophysical sources of positron-electron-pair annihilation radiation are characterized in reviews and reports of observational and theoretical investigations. Topics examined include gamma-ray lines from solar flares, gamma-ray bursts, pulsars, the Galactic center, active galaxies, and physical processes in relativistic and magnetized plasmas. Spectra, historgrams, graphs, and diagrams are provided.

Burns, M. L.↗

New approach to understanding NO emission during bubbling fluidized bed coal combustion: separation of NO formation and reduction processes in the bed

A new approach for separately evaluating NO formation and NO reduction during coal combustion in a fluidized bed was investigated. Sixteen different coals were burned in a laboratory-scale bubbling fluidized bed combustor with three different char loadings, which were established by changing the inlet oxygen concentrations. NO conversion ratios (X{sub NO} = the ratio of the mass of N atoms in the emitted NO to the mass of N atoms in the coal) were determined for the coals, and then 'ultimate NO conversion ratios' (X{sub NO}*) were obtained by extrapolation of the lines describing the dependence of X{sub NO} on O{sub 2} consumption rate to an O{sub 2} consumption rate of zero. The X{sub NO}* values correspond to the values that would be obtained for a single coal particle burning in the absence of char particles. Using this technique, the contribution of char particles to NO reduction was evaluated. The X{sub NO}* values depended on the N content and the O/N molar ratio of the coals. The bed temperature dependences of the sensitivity values (the slopes of the lines describing the dependence of X{sub NO} on O{sub 2} consumption rate), which include the contribution of NO reduction by char particles, differed substantially for the different coals. However, char loading had no clear effect on N{sub 2}O emission. This result suggests that the reduction by the char particles involves the competitive reaction of NO and N{sub 2}O, and the effect of the N{sub 2}O reduction by burning char particles was less than NO reduction. Our results indicate the importance of taking into account the effects of NO reduction by char particles on overall NOx emissions during fluidized bed combustion of coal. 19 refs., 14 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Evaluation of Solid Rocket Motor Component Data Using a Commercially Available Statistical Software Package

Commercially available software packages today allow users to quickly perform the routine evaluations of (1) descriptive statistics to numerically and graphically summarize both sample and population data, (2) inferential statistics that draws conclusions about a given population from samples taken of it, (3) probability determinations that can be used to generate estimates of reliability allowables, and finally (4) the setup of designed experiments and analysis of their data to identify significant material and process characteristics for application in both product manufacturing and performance enhancement. This paper presents examples of analysis and experimental design work that has been conducted using Statgraphics®(Registered Trademark) statistical software to obtain useful information with regard to solid rocket motor propellants and internal insulation material. Data were obtained from a number of programs (Shuttle, Constellation, and Space Launch System) and sources that include solid propellant burn rate strands, tensile specimens, sub‐scale test motors, full‐scale operational motors, rubber insulation specimens, and sub‐scale rubber insulation analog samples. Besides facilitating the experimental design process to yield meaningful results, statistical software has demonstrated its ability to quickly perform complex data analyses and yield significant findings that might otherwise have gone unnoticed. One caveat to these successes is that useful results not only derive from the inherent power of the software package, but also from the skill and understanding of the data analyst.

Stefanski, Philip L.↗

Data reduction considerations for the burning velocity of spherical constant volume flames of R32 (CH 2 F 2 ) with air

Here, the present work explores data reduction techniques for the measurement of the laminar burning velocities of R32(CH 2 F 2 )-air mixtures using a constant volume combustion device, in which the pressure-time history is the only measured parameter. To allow clear assessment of the accuracy of the data reduction methods, the pressure-time histories used for analysis are synthetically generated via a detailed numerical simulation employing full kinetics and with and without an optically-thin radiation model. Various data reduction models are employed, including a two-zone model and two multi-zone models, and these are compared with the results from the burning velocity obtained from the output of the numerical simulation. The data reduction schemes are shown to be accurate if the same radiation model is employed in the data reduction as was used in the flame simulation to generate the pressure trace used for post-processing. If the incorrect radiation model is employed, however, the errors can be quite large. The effects of stretch, radiation, and different data post-processing methodologies are explored and the errors quantified. Stretch is shown to be important for the early stages and the selected data range that is used for extrapolation has a significant effect on the extrapolated burning velocity. However, with an appropriate choice of data considered for extrapolation, the prediction of the unstretched burning velocity can be quite accurate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deterrent Concentration Measurement with FTIR and Subsequent Ballistic Performance in Medium Caliber Propellant

To meet ballistic requirements, medium and small caliber propellants use deterrent coatings to obtain burn rate progressivity. The required amount and distribution of deterrent varies between gun systems, propellant types, and often between lots. Micro Fourier Transform Infrared (FTIR) spectroscopy was used to measure deterrent gradients in RP36 propellants coated with methyl centralite (MC) at different deterrent levels and different processing conditions. The aromatic C-C bonds at 1496 cm(exp -1) wavenumber were used to monitor the deterrent profiles through the grain. Deterrent gradients measured with FTIR spectroscopy were then used to estimate burn rate gradients in the deterred grains. Burn rates were calculated from literature models and from closed bomb data of RP36 containing uniform deterrent concentration. Finally, the burn rate gradients were input into an IBHFG2 model of a 200 cc-closed bomb. The early flame spreading portion of the closed bomb ballistic cycle (0 to 0.2 P/Pmax) was roughly modeled by dividing the charge up into five propellant decks and igniting them at different times in the ballistic cycle. Pressure traces and vivacity curves from closed bomb shots were compared to predictions. In addition to the burn rate gradient, the closed bomb pressure trace was heavily dependent on ignition and flame spread. These two phenomena were not readily distinguishable from one another in deterred grains. The same RP-36 propellant was shot in a 25 mm M793TP round which was again modeled with IBHVG2. Peak pressure and muzzle velocity were accurately modeled when erosive burning effects were empirically factored into the model.

Furrow, Keith W.↗

Instantaneous devolatilization of pulverized coal particles in a hot gas with fluctuating temperature

Pulverized coal particles experience devolatilization processes during their early stages of combustion in a furnace. The volatile matter released from the particles affects the ignition, flame stability, and pollutant emission of pulverized coal combustion. The particle devolatilization rates are strongly dependent on the particle temperature; the instantaneous particle temperature is influenced by the turbulent gas fluctuation. Thus, it is necessary to explore further the effects of gas temperature fluctuation on the instantaneous devolatilization of pulverized coal particles. For most pulverized coal particles burning in a furnace or combustor, rapid devolatilization and fast release of volatiles occur usually when the particle temperature reaches 1000-1200 K. The instantaneous particle devolatilization processes are numerically computed for this temperature range. The particle under investigation is a single one suspended in a hot gas. A fixed relative velocity between the particle and the gas flow is assumed. The gas flow has a uniform but fluctuating temperature.

01 COAL, LIGNITE, AND PEAT↗

Experimental investigation of burning rates of pure ethanol and ethanol blended fuels

A fundamental experimental study to determine the burning rates of ethanol and ethanol-blended fossil fuels is presented. Pure liquid ethanol or its blends with liquid fossil fuels such as gasoline or diesel, has been transpired to the surface a porous sphere using an infusion pump. Burning of the fuel takes place on the surface of the porous sphere, which is placed in an air stream blowing upwards with a uniform velocity at atmospheric pressure and temperature under normal gravity conditions. At low air velocities, when ignited, a flame envelopes the sphere. For each sphere size, air stream velocity and fuel type, the fuel feed rate will vary and the same is recorded as the burning rate for that configuration. The flame stand-off distances from the sphere surface are measured by post-processing the digital image of the flame photograph using suitable imaging software. The transition velocity at which the flame moves and establishes itself at the wake region of the sphere has been determined for different diameters and fuel types. Correlations of these parameters are also presented. (author)

10 SYNTHETIC FUELS↗

UNUSUAL {sup 29,30}Si-RICH SiCs OF MASSIVE STAR ORIGIN FOUND WITHIN GRAPHITES FROM THE MURCHISON METEORITE

Correlated transmission electron microscopy and NanoSIMS isotopic studies have revealed two unusual SiCs with large {sup 29,30}Si enrichments within micron-sized graphites from the Murchison meteorite. Such anomalies are rare among the overall SiC population (in <<0.01% of SiCs yet measured), whereas two of the three SiCs found within graphite show {sup 29,30}Si enrichments, in one case as large as {sup 29}Si/{sup 28}Si = (2.28 {+-} 0.03) x solar and {sup 30}Si/{sup 28}Si = (2.03 {+-} 0.03)x solar. C-burning and Ne-burning in massive stars (>8 M{sub sun} initial mass) during their post-main-sequence development are the only processes capable of producing sufficiently large {sup 29,30}Si enrichments. This material with heavy Si isotopic enrichments from the O/Ne and O/Si layers is later incorporated into carbonaceous stardust, either in ejecta from Type II supernovae or perhaps in the colliding winds of Wolf-Rayet binaries. Although often too small for Si isotopic measurements, four other SiC-containing graphites show other signatures of a massive star origin. Abundance estimates suggest that such unusual SiCs are present within {approx}1% of high-density graphites. This abundance can be reconciled with the much lower abundance in the overall SiC population if these unusual SiCs are naturally smaller ({approx}200 nm or less) than SiCs from other isotopic subgroups and if differential destruction of small unusual SiCs occurs in massive star outflows unless these SiCs are encapsulated in graphite.

79 ASTRONOMY AND ASTROPHYSICS↗

Camp Fire processed Landsat 8 images, pre-fire, during-fire, post-fire

The Camp Fire rapidly spread across a landscape in Butte County, California, toward the city of Paradise in the early morning hours of 8 November 2018. GEE acquires L8 data products from USGS that include Real-Time Tier 1 DN values, representing scaled, calibrated at-sensor radiance, and Level-1 Precision Terrain (L1TP) processing. We carried out additional processing on the pre- and post-fire images, including an illumination correction to account for effects of steep topography, and radiometric normalization to ensure homogeneity between images. We also identified and processed high-quality images for both the pre-fire condition(25 Oct 2013), and the post-fire burn scar (26 Dec 2018). Using the tools we provided in the paper, we estimate that, over the first hour, the Camp Fire was consuming ~200 ha/minute of vegetation with a linear spread rate of 14 km over the fire’s first 25 minutes, or ~33km/hr. We briefly discuss broader use of remote sensing and geospatial analysis for fire research and risk management. A visualization app (sliderApp) that includes pre-fire, active fire, and post-fire images: https://caralyngorman.users.earthengine.app/view/camp-fire-sliding-map-3-9-19

54 ENVIRONMENTAL SCIENCES↗

An extremely carbon enhanced 'nova' model

Expanding upon the authors' earlier work, Hoyle and Clayton (1974) have suggested that a thermonuclear runaway in a white dwarf envelope that consists of equal numbers of protons and C-12 nuclei will produce the s or r-process elements. The present work studies such a runaway and finds that these initial conditions cause a 'super' nova outburst that does not result in any s or r-process nucleosynthesis. However, the model is very interesting in that it reaches peak temperatures of 1.6 billion K and peak burning rates exceeding 2 times 10 to the 23rd erg/gm/sec. A shock forms and ejects 10 to the 29th grams moving with speeds up to 60,000 km/sec. The peak bolometric magnitude is -21.2 and this model will also produce a gamma-ray burst.

Starrfield, S. G.↗

Nucleosynthesis of neutron-rich heavy nuclei during explosive helium burning in massive stars

The production of heavy nuclei during explosive helium burning has been calculated using a hydrodynamical model of a 15-solar mass (Type II) supernova and an n-process nuclear reaction network. It is found that the resulting neutron-rich heavy nuclei are not produced in the relative abundances of solar-system r-process material, especially in the vicinity of Pt, nor are any actinides produced. These deficiencies reflect an inadequate supply of neutrons. However, some neutron-rich isotopes, normally associated with the r-process, are produced which may be significant for the production of isotopic anomalies in meteorites.

Blake, J. B.↗

Time resolved density measurements in premixed turbulent flames

Premixed, turbulent flames are important in connection with investigations of fundamental, turbulent-reacting-flow processes and the study of practical combustion devices, such as spark ignition engines and premixed, prevaporized gas turbine combustors which burn premixed reactants. The considered investigation is concerned with the application of laser induced Rayleigh scattering to measure the gas density in premixed, methane-air flames. A description is provided of the results of density and velocity measurements in an open, lean, premixed methane-air flame stabilized in grid turbulence of low Reynolds number. It is found that where applicable, Rayleigh scattering can be used to good advantage to measure molecular number density. Mean and rms density results show that the mean flame thickens with axial distance but that the maximum in rms does not change appreciably.

Dandekar, K. V.↗

Comment on tangential wave motion in unstable combustors

An attempt is made to gain insight into the injection boundary instability mechanism as captured by a simple computational tool developed for liquid rocket engines. Considerable evidence is generated supporting a hypothesis that destructive tangential-mode instabilities in liquid-fuel combustors are driven by combustion processes occurring at the propellant-wetted injector face. The driving action is found to be directly analogous to a burning solid propellant surface mechanism, responsible for solid rocket motor instabilities. Since the proposed instability mechanism has not been fundamentally confirmed, experimental research is strongly recommended.

Litchford, Ron J.↗

Atomic-Based-Combined-Cycle Analysis

Atomic-based-combined-cycle (ABCC) engine combines an air-breathing ramjet engine with an atomic reactor to increase the mission-averaged specific impulse and thereby increasing the dry-mass ratio. ABCC engine is similar to RBCC engine except that energy needed for the propulsive power is derived from nuclear reaction rather than chemical combustion used in the RBCC engine. The potential performance improvement of an ABCC engine over a RBCC engine comes from two factors. Firstly, the energy density of nuclear reaction is several order of magnitudes higher than the chemical combustion. Secondly, hydrogen can produce much higher nozzle exit velocity because of its small molecular weight. A one-dimensional, transient numerical model was used to analyze a generic scramjet engine and it is used as a baseline to evaluate an imaginary ABCC engine performance. A nuclear reactor is treated as a black box energy source that replaces the role of the primary rocket and the chemical combustion chamber in a RBCC engine. Hydrogen is heated by the reactor and accelerated to produce high-speed ejection velocity. The ejection velocity up 10,000 m/sec is theoretically possible because of high energy density from the reactor and large gas constant of the hydrogen. Oxygen contained in the entrained air reacts with hydrogen and produces propulsive power for ejector mode operation. To provide enough thrust for initial acceleration, relatively large amount of hydrogen must be pumped through the reactor. Amount of oxygen contained in the entrained air may not be sufficient to burn all hydrogen and consequently combustion could occur at the end of exit nozzle. It is assumed that this combustion process is constant-pressure combustion at 1.0 atmospheric pressure and thus not affects the nozzle exit condition.

Han, Sam↗

Burning in Outer Space: Microgravity

A better understanding of combustion can lead to significant technological advances, such as less polluting, more fuel-efficient vehicles. Unfortunately, gravity can interfere with the study of combustion. Gravity drags down gases that are cooler- and, therefore, denser-than heated gases. This movement mixes the fuel and the oxidizer substance that promotes burning. Because of this mixing, an observer cannot necessarily distinguish what is happening as a result of the natural combustion process and what is caused, by the pull of gravity. To remove this uncertainty, scientists can conduct experiments that simulate the negation of gravity through freefall. This condition is known as a microgravity environment. A micro-gravity experiment may take place in a chamber that is dropped down a hole or from a high-speed drop tower. The experiment also be conducted in an airplane or a rocket during freefall in a parabolic flight path. This method provides less than a minute of microgravity at most. An experiment that requires the prolonged absence of gravity may necessitate the use of an orbiting spacecraft as a venue. However, access to an orbital laboratory is difficult to acquire. High-end computing centers such as the NCCS can provide a practical alternative to operating in microgravity. Scientists can model phenomena such as combustion without gravitys observational interference. The study of microgravity combustion produces important benefits beyond increased observational accuracy. Certain valuable materials that are produced through combustion can be formed with a more uniform crystal structure-and, therefore, improved structural quality-when the pull of gravity is removed. Furthermore, understanding how fires propagate in the absence of gravity can improve fire safety aboard spacecraft.

Matkowsky, Bernard↗

Advanced Subsonic Combustion Rig Developed

The Advanced Subsonic Combustion Rig (ASCR), a unique, state-of-the-art facility for conducting combustion research, is located at the NASA Lewis Research Center in Cleveland, Ohio. The ASCR, which was nearing completion at the close of 1995, will be capable of simulating the very high pressure and high temperature conditions that are expected to exist in future, advanced subsonic gas turbine (jet) engines. Future environmental regulations will require much cleaner burning (more environmentally friendly) aircraft engines. The ASCR is critical to the development of these cleaner engines. It will allow NASA and U.S. aircraft engine industry researchers to identify and test promising clean-burning gas turbine engine combustion concepts under the pressure and temperature conditions that are expected for those future engines. Combustion processes will be investigated for a variety of next-generation aircraft engine sizes, including engines for large, long-range aircraft (with typical trip lengths of about 3000 mi) and for regional aircraft (with typical trip lengths of about 400 mi). The ASCR design was conceived and initiated in 1993, and fabrication and construction of the rig, including the buildup of an advanced control room, took place throughout 1994 and 1995. In early 1996, the ASCR will be operational for obtaining research data. The ASCR is an intricate part of the NASA Advanced Subsonic Technology Propulsion Program, which is aimed at developing technologies critical to the next generation of gas turbine engines. This effort is in collaboration with the U.S. aircraft gas turbine engine industry. A goal of the Advanced Subsonic Technology Propulsion Program is to develop combustion concepts and technologies that will result in gas turbine engines that produce 50 percent less nitrous oxide (NO_x) pollutants than current engines do. This facility is unique in its capability to simulate advanced subsonic engine pressure, temperature, and air flow rate conditions. Specifically, it will provide operating temperatures up to 3000 F and pressures up to 60 atm. Under these conditions, researchers will obtain detailed combustion temperatures, pressures, and flow velocities as well as the chemical compositions of the combustion exhaust. Researchers also will be able to obtain data by using nonintrusive laser diagnostic techniques. The ASCR facility will be used to test fundamental combustion configurations (flametubes) for detailed study of combustion processes, to test sectors of gas turbine combustors to study the process in configurations more like those of aircraft engines, and in some cases to test full annular combustors.

Source record↗