Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Strong Correlation Effect in Ferrimagnetic Half-Metallic V{sub 2}CoAl and V{sub 2}CoGa Heusler Compounds

We present first-principles calculations based on the full-potential linearized augmented plane wave (FP-LAPW) method to investigate the structural, elastic, electronic, and magnetic properties of the Heusler compounds V{sub 2}CoAl and V{sub 2}CoGa. We explore different magnetic configurations in both regular and inverse Heusler structures: the Cu{sub 2}MnAl-type and Hg{sub 2}CuTi-type structures respectively. Our compounds are found to be ferrimagnets in the inverse Heusler structure. To take into account the effects of the strong correlation among the localized d-states, we perform a calculation using the GGA+U method (the general gradient approximation with the Hubbard on-site Coulomb correction U). Then we show that both compounds exhibit a half-metallic character and have a magnetic moment of 2.00 μ{sub B} per formula unit. This latter statement is coherent with the generalized Slater-Pauling rule (SP). In terms of the band structure calculations, we explain the formation of the indirect energy band gaps in the spin-majority channels. We also use the mean-field approximation (MFA) to discuss the magnetic exchange couplings and predict the Curie temperature for both compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic and electronic structures of lattice mismatched Cu 2 O/TiO 2 interfaces

Heterojunction interfaces between metal oxides are often highly lattice mismatched. The atomic and electronic structures of such interfaces, however, are not well understood. Here, we have synthesized Cu 2 O/TiO 2 heterojunction thin films with 13% lattice mismatch and studied the interface via experimental methods and large-scale density function theory calculations of supercells containing 1300 atoms. We find that an interface of epitaxial quality is formed via a coincidence site lattice of 8 Cu 2 O unit cells matching 9 TiO 2 unit cells. Calculations reveal the existence of a dislocation core of the O sublattices at the interface and a random arrangement of one layer of interfacial Cu atoms. The interfacial electronic structure is found to be mostly determined by the interfacial Cu distribution, rather than by the O dislocation core. The conduction band minimum and valence band maximum states are spatially separated, and there is no strongly localized state near the core.

74 ATOMIC AND MOLECULAR PHYSICS↗

Chemical and electronic passivation of 4H-SiC surface by hydrogen-nitrogen mixed plasma

We propose a low-temperature electron cyclotron resonance microwave hydrogen-nitrogen mixed plasma treatment method for passivating 4H-SiC surface and investigate the effects of treatment on the structural, chemical, and electronic properties of the surface. The results indicate that the method is highly controllable and could result in an atomically ordered, unreconstructed, smooth, and clean SiC surface. The absence of surface band bending is indicative of an electronically passivated SiC surface with a surface state density as low as 5.47 × 10{sup 10} cm{sup −2}. This effect could be attributed to the simultaneous effects of H and N passivating on SiC surface.

36 MATERIALS SCIENCE↗

Theoretical investigation on improving the ductility of Rh{sub 3}V by ternary addition

The band structure calculations are performed on the intermetallic compounds Rh{sub 3}V and Rh{sub 3}V{sub x}(Al){sub 1-x} by Full Potential Linearized Augmented Plane Wave(FP-LAPW) method. Total energies are calculated as a function of volume and fitted to Birch-Murnaughan equation of state to find the lattice parameter and the other ground state properties. The ductility of these compounds has been analyzed using Cauchy’s Pressure, Pugh Rule and Poisson’s ratio. From this study we observed that Rh{sub 3}V is brittle while its alloy Rh{sub 3}V{sub 0.875}Al{sub 0.125} is ductile. Electron density plots are illustrated and compared.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Diagrammatic approach to nonlinear optical response with application to Weyl semimetals

Nonlinear optical responses are a crucial probe of physical systems including periodic solids. In the absence of electron-electron interactions, they are calculable with standard perturbation theory starting from the band structure of Bloch electrons, but the resulting formulas are often large and unwieldy, involving many energy denominators from intermediate states. This work gives a Feynman diagram approach to calculating nonlinear responses. This diagrammatic method is a systematic way to perform perturbation theory, which often offers shorter derivations and also provides a natural interpretation of nonlinear responses in terms of physical processes. Applying this method to second-order responses concisely reproduces formulas for the second-order-harmonic shift current. We then apply this method to third-order responses and derive formulas for third-order-harmonic generation and self-focusing of light, which can be directly applied to tight-binding models. Third-order responses in the semiclasscial regime include a Berry curvature quadrupole term, whose importance is discussed including symmetry considerations and when the Berry curvature quadrupole becomes the leading contribution. In conclusion, the method is applied to compute third-order optical responses for a model Weyl semimetal, where we find a new topological contribution that diverges in a clean material, as well as resonances with a peculiar linear character.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photodetectors based on single-walled carbon nanotubes and thiamonomethinecyanine J-aggregates on flexible substrates

The present paper is devoted to observations of the photoresistive effect in multilayer structures with a sensitive layer of J-aggregates of thiamonomethinecyanine polymethine dye and a transparent electrode of a conductive carbon-nanotube network on a flexible polyethylenenaphtalate substrate. The effect of narrow-band emission with a wavelength of 465 nm on a change in the conductivity of the fabricated structures is studied. The prepared samples are studied by atomic-force microscopy, Raman spectroscopy, and spectrophotometry methods. It is shown that these structures are photosensitive to the indicated spectral region, and the dye layer is a film of dye J-aggregates. The change in the sample conductivity upon exposure to light one hundred times exceeds the dark conductivity. In general, the principal possibility of developing a photoresistive detector based on J-aggregates of cyanine dyes on flexible supports on account of the use of transparent and conductive carbon-nanotube layers is shown.

36 MATERIALS SCIENCE↗

EXPRESS: Accurate Measurement of the Optical Constants n and k for a Series of 57 Inorganic and Organic Liquids for Optical Modeling and Detection

For optical modeling and other purposes, we have created a library of 57 liquids for which we have measured the complex optical constants n and k. These liquids vary in their nature, ranging in properties including chemical structure, optical band strength, volatility and viscosity. By obtaining the optical constants one can in principle model most optical phenomena in media and at interfaces including reflection, refraction and dispersion. Based on the original methods of J.E. Bertie et al.1 [1Bert1], we have developed improved protocols using multiple path lengths to determine the optical constants n/k for dozens of liquids, including inorganic, organic and organophosphorus compounds. Detailed descriptions of the measurement and data reduction protocols are discussed; agreement of the derived optical constant n and k values with literature values are presented. We also present results using the n/k values as applied to an optical modeling scenario whereby the derived data are presented and tested for models of 1 µm and 100 µm layers for DMMP (dimethyl methyl phosphonate) on both metal (aluminum) and dielectric (soda lime glass) substrates to show substantial differences between the reflected signal from highly reflective substrates and less-reflective substrates.

infrared↗

Mathematical Morphological Filtering with a Self-Adaptive Reconstruction Technique and Application to Local Seismic Data

Recorded seismic data are generally contaminated by noise from different sources, which masks the signals of interest. In the seismology community, frequency filtering (FF) is the standard method for noise suppression. However, when the signal of interest and noise share the same frequency band, the latter cannot be filtered out without infringing on the former. We implemented a noise suppression approach based on the mathematical morphology theorem. The method involves compound operations of dilation and erosion using structuring elements of varying lengths and decomposes an input noisy waveform into several time functions with differing characteristics. Further, the filtered waveform is constructed from the time functions using a self-adaptive reconstruction technique. Application to a data set of >4700 local waveforms suggests that the implemented mathematical morphological filtering (MMF) approach is efficient for data with low signal-to-noise ratio (SNR) and significantly outperforms FF in that SNR range. For most of the dataset, FF, machine learning (ML) denoising, and continuous wavelet transform (CWT) thresholding result in higher SNR values compared with the MMF method. However, for ~42% of the waveforms, MMF outperforms FF, and the SNR gain achieved with MMF is as large as ~23 dB. Compared to ML denoising and CWT thresholding, this proportion drops to only ~10%–14%. Our results suggests that in an operational setting, MMF cannot replace the other noise suppression methods; however, signal detection can be improved if MMF is used to supplement them in some scenarios. MMF could help detect signals in problematic low-SNR data, which are currently being missed particularly when using FF alone.

58 GEOSCIENCES↗

Phase separation of metallic hydrogen-helium alloys

Calculations are presented for the thermodynamic functions and phase-separation boundaries of solid metallic hydrogen-helium alloys at temperatures between zero and 19,000 K and at pressures between 15 and 90 Mbar. Expressions for the band-structure energy of a randomly disordered alloy (including third order in the electron-ion interaction) are derived and evaluated. Short- and long-range orders are included by the quasi-chemical method, and lattice dynamics in the virtual-crystal harmonic approximation. It is concluded that at temperatures below 4000 K, there is essentially complete phase separation of hydrogen-helium alloys and that a miscibility gap remains at the highest temperatures and pressures considered. The relevance of these results to models of the deep interior of Jupiter is briefly discussed.

Straus, D. M.↗

Bulk Growth of Wide Band Gap II-VI Compound Semiconductors by Physical Vapor Transport

The mechanism of physical vapor transport of II-VI semiconducting compounds was studied both theoretically, using a one-dimensional diffusion model, as well as experimentally. It was found that the vapor phase stoichiometry is critical in determining the vapor transport rate. The experimental heat treatment methods to control the vapor composition over the starting materials were investigated and the effectiveness of the heat treatments was confirmed by partial pressure measurements using an optical absorption technique. The effect of residual (foreign) gas on the transport rate was also studies theoretically by the diffusion model and confirmed experimentally by the measurements of total pressure and compositions of the residual gas. An in-situ dynamic technique for the transport rate measurements and a further extension of the technique that simultaneously measured the partial pressures and transport rates were performed and, for the first time, the experimentally determined mass fluxes were compared with those calculated, without any adjustable parameters, from the diffusion model. Using the information obtained from the experimental transport rate measurements as guideline high quality bulk crystal of wide band gap II-VI semiconductor were grown from the source materials which undergone the same heat treatment methods. The grown crystals were then extensively characterized with emphasis on the analysis of the crystalline structural defects.

Su, Ching-Hua↗

Bulk Growth of Wide Band Gap II-VI Compound Semiconductors by Physical Vapor Transport

The mechanism of physical vapor transport of II-VI semiconducting compounds was studied both theoretically, using a one-dimensional diffusion model, as well as experimentally. It was found that the vapor phase stoichiometry is critical in determining the vapor transport rate. The experimental heat treatment methods to control the vapor composition over the starting materials were investigated and the effectiveness of the heat treatments was confirmed by partial pressure measurements using an optical absorption technique. The effect of residual (foreign) gas on the transport rate was also studies theoretically by the diffusion model and confirmed experimentally by the measurements of total pressure and compositions of the residual gas. An in-situ dynamic technique for the transport rate measurements and a further extension of the technique that simultaneously measured the partial pressures and transport rates were performed and, for the first time, the experimentally determined mass fluxes were compared with those calculated, without any adjustable parameters, from the diffusion model. Using the information obtained from the experimental transport rate measurements as guideline high quality bulk crystal of wide band gap II-VI semiconductor were grown from the source materials which undergone the same heat treatment methods. The grown crystals were then extensively characterized with emphasis on the analysis of the crystalline structural defects.

Su, Ching-Hua↗

Study of Electronic, Mechanical, Magnetic, and Optical Properties of Mg{sub 0.75}TM{sub 0.25}S/Se (TM = Fe, Co, Ni): A First Principle Approach

A systematic study of the magnetism, mechanical, and optical behaviors of Mg{sub 0.75}TM{sub 0.25}S/Se (TM = Fe, Co, Ni) ordered alloys was conducted using the full-potential linearized augmented plane wave plus local orbital method. The ferromagnetic (FM) and antiferromagnetic (AFM) ground state energy differences and enthalpy of formation scrutinized their dynamical stability in the FM state. The elastic parameters decided their mechanical stability, ductile behavior, and partial ionic and covalent characters. Moreover, the calculated band structures and density of states revealed the type and origin of magnetism in terms of exchange splitting energies and exchange constants. The Fe- and Ni-doped MgS/Se alloys exhibited half metallic ferromagnetic (HMF) characteristics, while the Co-doped MgS/Se alloy depicted ferromagnetic semiconducting characters. A reduction in the magnetic moments of the transition metals was observed compared with their free space value, which is due to strong p-d hybridization. Furthermore, the optical spectrum showed the maximum light absorbed in the visible and in the UV region of the electromagnetic spectrum, which makes them potential candidates for optoelectronic and spintronic device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band Anticrossing in Highly Mismatched Compound Semiconductor Alloys

Compound semiconductor alloys in which metallic anions are partially replaced with more electronegative isoelectronic atoms have recently attracted significant attention. Group IIIN(x)V(1-x), alloys with a small amount of the electronegative N substituting more metallic column V elements has been the most extensively studied class of such Highly Mismatched Alloys (HMAs). We have shown that many of the unusual properties of the IIIN(x),V(1-x) alloys can be well explained by the Band Anticrossing (BAC) model that describes the electronic structure in terms of an interaction between highly localized levels of substitutional N and the extended states of the host semiconductor matrix. Most recently the BAC model has been also used to explain similar modifications of the electronic band structure observed in Te-rich ZnS(x)Te(l-x) and ZnSe(Y)Te(1-y) alloys. To date studies of HMAs have been limited to materials with relatively small concentrations of highly electronegative atoms. Here we report investigations of the electronic structure of ZnSe(y)Te(1-y) alloys in the entire composition range, 0 less than or equal to y less than or equal to 1. The samples used in this study are bulk ZnSe(y)Te(1-y) crystals grown by either a modified Bridgman method or by physical vapor transport. Photomodulated reflection (PR) spectroscopy was used to measure the composition dependence of optical transitions from the valence band edge and from the spin-orbit split off band to the conduction band. The pressure dependence of the band gap was measured using optical absorption in a diamond anvil cell. We find that the energy of the spin-orbit split off valence band edge does not depend on composition and is located at about 3 eV below the conduction band edge of ZnSe. On the Te-rich side the pressure and the composition dependence of the optical transitions are well explained by the BAC model which describes the downward shift of the conduction band edge in terms of the interaction between localized Se states and the conduction band. On the other hand we show that the large band gap reduction observed on the Se-rich side of the alloy system is a result of an interaction between the localized Te level and the valence bands. This interaction leads to the formation of a Te-like valence band edge that strongly interacts with the light hole valence band. Calculations based on a modified k p model account for the reduction of the band gap and the large increase of the spin-orbit splitting observed in Se-rich ZnSe(y)Te(l-y) alloys. We will also discuss the importance of these new results for understanding of the electronic structure and band offsets in other highly mismatched alloy systems.

Yu, Kin Man↗

On the Growth of FeIn{sub 2}S{sub 2}Se{sub 2} Single Crystals and the Study of their Properties

FeIn{sub 2}S{sub 2}Se{sub 2} single crystals are grown for the first time by the Bridgman method, and their composition and properties are determined. It is found that the single crystals are hexagonal in structure. The arrangement of Fe ions in the structure of the FeIn{sub 2}S{sub 2}Se{sub 2} crystals is studied by nuclear γ-resonance spectroscopy. From the transmittance spectra in the region of the fundamental absorption edge, the band gap of the single crystals grown in the study is determined.

36 MATERIALS SCIENCE↗

The optical, ultraviolet, and X-ray structure of the quasar HE 0435–1223

Microlensing has proved an effective probe of the structure of the innermost regions of quasars and an important test of accretion disk models. We present light curves of the lensed quasar HE 0435–1223 in the R band and in the ultraviolet (UV), and consider them together with X-ray light curves in two energy bands that are presented in a companion paper. Using a Bayesian Monte Carlo method, we constrain the size of the accretion disk in the rest-frame near- and far-UV, and constrain for the first time the size of the X-ray emission regions in two X-ray energy bands. The R-band scale size of the accretion disk is about 10{sup 15.23} cm (∼23r{sub g}), slightly smaller than previous estimates, but larger than would be predicted from the quasar flux. In the UV, the source size is weakly constrained, with a strong prior dependence. The UV to R-band size ratio is consistent with the thin disk model prediction, with large error bars. In soft and hard X-rays, the source size is smaller than ∼10{sup 14.8} cm (∼10r{sub g} ) at 95% confidence. We do not find evidence of structure in the X-ray emission region, as the most likely value for the ratio of the hard X-ray size to the soft X-ray size is unity. Finally, we find that the most likely value for the mean mass of stars in the lens galaxy is ∼0.3 M{sub ☉}, consistent with other studies.

79 ASTRONOMY AND ASTROPHYSICS↗

Electronic properties of hexagonal gallium phosphide: A DFT investigation

A detail density functional investigation is performed to develop hexagonal 2D gallium phosphide material. The geometry, band structure and density of states (total and projected) of 2D hexagonal GaP are reported in detail. It is heartening to note that the developed material is identified as an indirect band gap semiconductor. The indirect gap for this material is predicted as 1.97 eV at K-Γ, and a direct gap of 2.28 eV at K point is achieved, which is very close to the reported direct band gap for zinc blende and buckled structures of GaP.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Novel visible-light AgBr/Ag₃PO₄ hybrids photocatalysts with surface plasma resonance effects

Three kinds of AgBr/Ag₃PO₄ hybrids were synthesised via an anion-exchange precipitation method and characterised by XRD, XPS, SEM, EDS, and UV–vis. The results showed that AgBr/Ag₃PO₄ hybrids displayed much higher photocatalytic activities than single Ag₃PO₄ or AgBr under visible light (λ>420 nm), and ·OH and h⁺ were the major active species during the degradation process. Considering interstitial ions Agᵢ⁺ on lattice gap of AgBr are easy to become sliver particle, we deduced the possible photocatalytic mechanism could be ascribed to the synergistic effects of the appropriate valence band position of Ag₃PO₄ and AgBr, surface plasmon resonance effect of Ag⁰, reactive radical species Br⁰, and the Ag vacancy on the surface of catalysts. - Graphical abstract: The optical absorption and structural morphology of the as-prepared AgBr@Ag₃PO₄ photocatalyst using an anion-exchange precipitation method are conductive to the photocatalytic degradation of organics in water. Highlights: • Novel AgBr/Ag₃PO₄ hybrids are synthesised by a facile method. •AgBr/Ag₃PO₄ hybrids show excellent photocatalytic activities under visible light. • Interstitial ions are in favour of the formation of Ag particle. • Surface plasmon resonance effect plays a key factor for light absorption. • The photocatalytic mechanism for AgBr/Ag₃PO₄ hybrids is studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗