Search NASA⌕ Search

SEARCH · Search NASA

Results for “COUPLINGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Feasibility of Coupling Between a Single-Mode Elliptical-Core Fiber and a Single Mode Rib Waveguide Over Temperature

To determine the feasibility of coupling the output of an optical fiber to a rib waveguide in a temperature environment ranging from 20 C to 300 C, a theoretical calculation of the coupling efficiency between the two was investigated. This is a significant problem which needs to be addressed to determine whether an integrated optic device can function in a harsh temperature environment. Because the behavior of the integrated-optic device is polarization sensitive, a polarization-preserving optic fiber, via its elliptical core, was used to couple light with a known polarization into the device. To couple light energy efficiently from an optical fiber into a channel waveguide, the design of both components should provide for well-matched electric field profiles. The rib waveguide analyzed was the light input channel of an integrated-optic pressure sensor. Due to the complex geometry of the rib waveguide, there is no analytical solution to the wave equation for the guided modes. Approximation or numerical techniques must be utilized to determine the propagation constants and field patterns of the guide. In this study, three solution methods were used to determine the field profiles of both the fiber and guide: the effective-index method (EIM), Marcatili's approximation, and a Fourier method. These methods were utilized independently to calculate the electric field profile of a rib channel waveguide and elliptical fiber at two temperatures, 20 C and 300 C. These temperatures were chosen to represent a nominal and a high temperature that the device would experience. Using the electric field profile calculated from each method, the theoretical coupling efficiency between the single-mode optical fiber and rib waveguide was calculated using the overlap integral and results of the techniques compared. Initially, perfect alignment was assumed and the coupling efficiency calculated. Then, the coupling efficiency calculation was repeated for a range of transverse offsets at both temperatures. Results of the calculation indicate a high coupling efficiency can be achieved when the two components were properly aligned. The coupling efficiency was more sensitive to alignment offsets in the y direction than the x, due to the elliptical modal profile of both components. Changes in the coupling efficiency over temperature were found to be minimal.

Tuma, Margaret L.↗

Large- and Small-Scale Ring Current Electrodynamic Coupling

In this talk we will address the two primary issues of ring current (RC) electrodynamic coupling: 1. RC self-consistent magnetosphere-ionosphere coupling that includes calculation of the magnetospheric electric field (large scale electrodynamic coupling); and 2. RC self-consistent coupling with electromagnetic ion cyclotron (EMIC) waves (small scale electrodynamic coupling). Our study will be based on two RC models that we have recently developed in our group. The first model by Khazanov et al. [2002] couples the system of two kinetic equations: one equation which describes the RC ion dynamics and another equation which describes the energy density evolution of EMIC waves. The second model by Khazanov et al. [2003] deals with large scale electrodynamic coupling processes and provides a self-consistent simulation of RC ions and the magnetospheric electric field. There is presently no model that addresses both of these issues simultaneously in a self-consistent calculation. However, the need exists for such a model, because these two processes directly influence each other, with the mesoscale coupling changing the drift paths of the thermal and energetic particle populations in the inner magnetosphere, thereby changing the wave interactions, and the microscale coupling altering the pitch angle distributions and ionospheric conductivities (through increased precipitation), thus changing the field-aligned currents and electric potential structure. The initial thrust of the work will be the development of a combined kinetic model of micro- and meso-scale RC electrodynamic coupling processes and to examine their interactions with each other on a global scale.

Khazanov, G. V.↗

Cross-Scale Coupling in the Inner Magnetosphere

Magnetosphere-ionosphere (MI) coupling has interested scientists for decades and, in spite of experimental and theoretical research efforts, is still one of the least well-known dynamic processes in space plasma. The reason for this is that the numerous physical processes associated with MI coupling occur over multiple spatial lengths and temporal scales. One typical example of MI coupling is small- and large-scale ring current (RC) electrodynamic coupling. In this talk, we will address the two primary issues of RC electrodynamic coupling: (1) RC self-consistent coupling with electromagnetic ion cyclotron (EMIC) waves (small-scale electrodynamic coupling) and (2) RC self-consistent MI coupling that includes calculation of the magnetospheric electric field (large-scale electrodynamic coupling). We also will emphasize the role of the heavy ions in the number of wave-particle interaction magnetospheric processes. In particular, we will discuss some of the experimental and theoretical studies that have investigated the role of the heavy ions (mainly He(+) and O(+)) in generation and propagation of electromagnetic ion cyclotron waves and their contribution to the heating of magnetospheric electrons and ions. The more recent studies have also shown that the heavy ions can greatly contribute to a generation of lower hybrid waves, ring current precipitation phenomena, and the overall energy redistribution in the inner magnetosphere. Using newly developed 2.5-dimensional particle-in-cell simulations, we study the energization and nonlinear coupling of different plasma waves in the presence of the heavy ions. We have shown that the high frequency wave modes critically depend on the heavy ion density and irrespective of the driven wave modes, both the light and heavy ions undergo significant transverse acceleration. But for the large heavy-ion densities, even the electrons are significantly accelerated in the parallel direction by the waves below the LH frequency.

Khazanov, G. V.↗

Experiments with Memory-to-Memory Coupling for End-to-End fusion Simulation Workflows

Scientific applications are striving to accurately simulate multiple interacting physical processes that comprise complex phenomena being modeled. Efficient and scalable parallel implementations of these coupled simulations present challenging interaction and coordination requirements, especially when the coupled physical processes are computationally heterogeneous and progress at different speeds. In this paper, we present the design, implementation and evaluation of a memory-to-memory coupling framework for coupled scientific simulations on high-performance parallel computing platforms. The framework is driven by the coupling requirements of the Center for Plasma Edge Simulation, and it provides simple coupling abstractions as well as efficient asynchronous (RDMA-based) memory-to-memory data transport mechanisms that complement existing parallel programming systems and data sharing frameworks. The framework enables flexible coupling behaviors that are asynchronous in time and space, and it supports dynamic coupling between heterogeneous simulation processes without enforcing any synchronization constraints. We evaluate the performance and scalability of the coupling framework using a specific coupling scenario, on the Jaguar Cray XT5 system at Oak Ridge National Laboratory.

99 GENERAL AND MISCELLANEOUS↗

Fully coupled hydro-mechanical numerical manifold modeling of porous rock with dominant fractures

Coupled hydro-mechanical (HM) processes are significant in geological engineering such as oil and gas extraction, geothermal energy, nuclear waste disposal and for the safety assessment of dam foundations and rock slopes, where the geological media usually consist of fractured rock masses. We developed a model for the analysis of coupled hydro-mechanical processes in porous rock containing dominant fractures, by using the numerical manifold method (NMM). In the current model, the fractures are regarded as different material domains from surrounding rock, i.e., finite-thickness fracture zones as porous media. Compared with the rock matrix, these fractured porous media are characterized with nonlinear behavior of hydraulic and mechanical properties, involving not only direct (poroelastic) coupling but also indirect (property change) coupling. By combining the potential energy associated with mechanical responses, fluid flow and solid–fluid interactions, a new formulation for direct HM coupling in porous media is established. For indirect coupling associated with fracture opening/closure, we developed a new approach implicitly considering the nonlinear properties by directly assembling the corresponding strain energy. Compared with traditional methods with approximation of the nonlinear constitutive equations, this new formulation achieves a more accurate representation of the nonlinear behavior. We implemented the new model for coupled HM analysis in NMM, which has fixed mathematical grid and accurate integration, and developed a new computer code. We tested the code for direct coupling on two classical poroelastic problems with coarse mesh and compared the results with the analytical solutions, achieving excellent agreement, respectively. We tested for indirect coupling on models with a single dominant fracture and obtained reasonable results. The current poroelastic NNM model with a continuous finite-thickness fracture zone will be further developed considering thin fractures in a discontinuous approach for a comprehensive model for HM analysis in fractured porous rock masses.

58 GEOSCIENCES↗

Competing Interface and Bulk Effect–Driven Magnetoelectric Coupling in Vertically Aligned Nanocomposites

Abstract Room‐temperature magnetoelectric (ME) coupling is developed in artificial multilayers and nanocomposites composed of magnetostrictive and electrostrictive materials. While the coupling mechanisms and strengths in multilayers are widely studied, they are largely unexplored in vertically aligned nanocomposites (VANs), even though theory has predicted that VANs exhibit much larger ME coupling coefficients than multilayer structures. Here, strong transverse and longitudinal ME coupling in epitaxial BaTiO 3 :CoFe 2 O 4 VANs measured by both optical second harmonic generation and piezoresponse force microscopy under magnetic fields is reported. Phase field simulations have shown that the ME coupling strength strongly depends on the vertical interfacial area which is ultimately controlled by pillar size. The ME coupling in VANs is determined by the competition between the vertical interface coupling effect and the bulk volume conservation effect. The revealed mechanisms shed light on the physical insights of vertical interface coupling in VANs in general, which can be applied to a variety of nanocomposites with different functionalities beyond the studied ME coupling effect.

36 MATERIALS SCIENCE↗

Evaluation of coupling approaches for thermomechanical simulations

Many problems of interest, particularly in the nuclear engineering field, involve coupling between the thermal and mechanical response of an engineered system. The strength of the two-way feedback between the thermal and mechanical solution fields can vary significantly depending on the problem. Contact problems exhibit a particularly high degree of two-way feedback between those fields. This paper describes and demonstrates the application of a flexible simulation environment that permits the solution of coupled physics problems using either a tightly coupled approach or a loosely coupled approach. In the tight coupling approach, Newton iterations include the coupling effects between all physics, while in the loosely coupled approach, the individual physics models are solved independently, and fixed-point iterations are performed until the coupled system is converged. These approaches are applied to simple demonstration problems and to realistic nuclear engineering applications. The demonstration problems consist of single and multi-domain thermomechanics with and without thermal and mechanical contact. Simulations of a reactor pressure vessel under pressurized thermal shock conditions and a simulation of light water reactor fuel are also presented. Here, problems that include thermal and mechanical contact, such as the contact between the fuel and cladding in the fuel simulation, exhibit much stronger two-way feedback between the thermal and mechanical solutions, and as a result, are better solved using a tight coupling strategy.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Electrochemical proton-coupled electron transfer: Beyond the golden rule

Electrochemical proton-coupled electron transfer rate constant expressions that interpolate between the golden rule and solvent-controlled limits are derived. These expressions include the effects of solvent dynamics and thus are applicable for a wide range of vibronic couplings and solvent relaxation times. The golden rule limit is defined in terms of weak vibronic coupling and fast solvent relaxation, and the solvent-controlled limit is defined in terms of strong vibronic coupling and slow solvent relaxation. In the golden rule limit, the rate constant is proportional to the square of the vibronic coupling and is independent of the solvent relaxation time. In the solvent-controlled limit, the rate constant is independent of the vibronic coupling and increases as the solvent relaxation time decreases. The interconversion between the solvent-controlled and golden rule limits can be induced by altering the proton donor-acceptor mode frequency and the overlap between the reactant and product proton vibrational wave functions, as well as the electronic coupling, the solvent relaxation time, and the overpotential. The kinetic isotope effect behaves differently in the solvent-controlled and golden rule limits and thus provides a unique probe for characterizing electrochemical proton-coupled electron transfer processes. The analogous rate constant expressions for electrochemical electron transfer and homogeneous proton-coupled electron transfer are also presented. The impact of electrode overpotential, solvent relaxation time, and proton donor-acceptor mode frequency on the rate constants are analyzed for model systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamical transition between weak and strong coupling in Brillouin laser pulse amplification

Short laser pulse amplification via stimulated Brillouin backscattering in plasma is considered. Previous work distinguishes between the weakly and strongly coupled regime and treats them separately. It is shown here that such a separation is not generally applicable because strong and weak coupling interaction regimes are entwined with each other. An initially weakly coupled amplification scenario may dynamically transform into strong coupling. This happens when the local seed amplitude grows and thus triggers the strongly driven plasma response. On the other hand, when in a strong coupling scenario, the pump pulse gets depleted, and its amplitude might drop below the strong coupling threshold. This may cause significant changes in the final seed pulse shape. Furthermore, experimentally used pump pulses are typically Gaussian-shaped. The intensity threshold for strong coupling may only be exceeded around the maximum and not in the wings of the pulse. Also here, a description valid in both strong and weak coupling regimes is required. We propose such a unified treatment which allows us, in particular, to study the dynamic transition between weak and strong coupling. Consequences for the pulse forms of the amplified seed are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Late universe dynamics with scale-independent linear couplings in the dark sector

We explore the dynamics of cosmological models with two coupled dark components with energy densities {rho}{sub A} and {rho}{sub B} and constant equation of state (EOS) parameters w{sub A} and w{sub B}. We assume that the coupling is of the form Q=Hq({rho}{sub A},{rho}{sub B}), so that the dynamics of the two components turns out to be scale independent, i.e. does not depend explicitly on the Hubble scalar H. With this assumption, we focus on the general linear coupling q=q{sub o}+q{sub A}{rho}{sub A}+q{sub B}{rho}{sub B}, which may be seen as arising from any q({rho}{sub A},{rho}{sub B}) at late time and leads in general to an effective cosmological constant. In the second part of the paper we consider observational constraints on the form of the coupling from SN Ia data, assuming that one of the components is cold dark matter (CDM), i.e. w{sub B}=0, while for the other the EOS parameter can either have a standard (w{sub A}>-1) or phantom (w{sub A}<-1) value. We find that the constant part of the coupling function is unconstrained by SN Ia data and, among typical linear coupling functions, the one proportional to the dark energy density {rho}{sub A} is preferred in the strong coupling regime, |q{sub A}|>1. Models with phantom w{sub A} favor a positive coupling function, increasing {rho}{sub A}. In models with standard w{sub A}, not only a negative coupling function is allowed, transferring energy to CDM, but the uncoupled subcase falls at the border of the likelihood.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effects on the two-point correlation function from the coupling of quintessence to dark matter

We investigate the effects of the nonminimal coupling between the scalar field dark energy (quintessence) and the dark matter on the two-point correlation function. It is well known that this coupling shifts the turnover scale as well as suppresses the amplitude of the matter power spectrum. However, these effects are too small to be observed when we limit the coupling strength to be consistent with observations. Since the coupling of quintessence to baryons is strongly constrained, species-dependent coupling may arise. This results in a baryon bias that is different from unity. Thus, we investigate the correlation function in this coupled model. We are able to observe the enhancement of the baryon acoustic oscillation (BAO) peak due to the increasing bias factor of baryon from this species-dependent coupling. In order to avoid the damping effect of the BAO signature in the matter power spectrum due to nonlinear clustering, we consider the coupling effect on the BAO bump in the linear regime. This provides an alternative method to constrain the coupling of dark energy to dark matter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Angle-Resolved Photoemission Spectroscopy on Electronic Structure and Electron-Phonon Coupling in Cuprate Superconductors

In addition to the record high superconducting transition temperature (T{sub c}), high temperature cuprate superconductors are characterized by their unusual superconducting properties below T{sub c}, and anomalous normal state properties above T{sub c}. In the superconducting state, although it has long been realized that superconductivity still involves Cooper pairs, as in the traditional BCS theory, the experimentally determined d-wave pairing is different from the usual s-wave pairing found in conventional superconductors. The identification of the pairing mechanism in cuprate superconductors remains an outstanding issue. The normal state properties, particularly in the underdoped region, have been found to be at odd with conventional metals which is usually described by Fermi liquid theory; instead, the normal state at optimal doping fits better with the marginal Fermi liquid phenomenology. Most notable is the observation of the pseudogap state in the underdoped region above T{sub c}. As in other strongly correlated electrons systems, these unusual properties stem from the interplay between electronic, magnetic, lattice and orbital degrees of freedom. Understanding the microscopic process involved in these materials and the interaction of electrons with other entities is essential to understand the mechanism of high temperature superconductivity. Since the discovery of high-T{sub c} superconductivity in cuprates, angle-resolved photoemission spectroscopy (ARPES) has provided key experimental insights in revealing the electronic structure of high temperature superconductors. These include, among others, the earliest identification of dispersion and a large Fermi surface, an anisotropic superconducting gap suggestive of a d-wave order parameter, and an observation of the pseudogap in underdoped samples. In the mean time, this technique itself has experienced a dramatic improvement in its energy and momentum resolutions, leading to a series of new discoveries not thought possible only a decade ago. This revolution of the ARPES technique and its scientific impact result from dramatic advances in four essential components: instrumental resolution and efficiency, sample manipulation, high quality samples and well-matched scientific issues. The purpose of this treatise is to go through the prominent results obtained from ARPES on cuprate superconductors. Because there have been a number of recent reviews on the electronic structures of high-T{sub c} materials, we will mainly present the latest results not covered previously, with a special attention given on the electron-phonon interaction in cuprate superconductors. What has emerged is rich information about the anomalous electron-phonon interaction well beyond the traditional views of the subject. It exhibits strong doping, momentum and phonon symmetry dependence, and shows complex interplay with the strong electron-electron interaction in these materials. ARPES experiments have been instrumental in identifying the electronic structure, observing and detailing the electron-phonon mode coupling behavior, and mapping the doping evolution of the high-T{sub c} cuprates. The spectra evolve from the strongly coupled, polaronic spectra seen in underdoped cuprates to the Migdal-Eliashberg like spectra seen in the optimally and overdoped cuprates. In addition to the marked doping dependence, the cuprates exhibit pronounced anisotropy with direction in the Brillouin zone: sharp quasiparticles along the nodal direction that broaden significantly in the anti-nodal region of the underdoped cuprates, an anisotropic electron-phonon coupling vertex for particular modes identified in the optimal and overdoped compounds, and preferential scattering across the two parallel pieces of Fermi surface in the antinodal region for all doping levels. This also contributes to the pseudogap effect. To the extent that the Migdal-Eliashberg picture applies, the spectra of the cuprates bear resemblance to that seen in established strongly coupled electron-phonon superconductors such as Pb. On the other hand, the cuprates deviate from this conventional picture. In the underdoped regime, the carriers are best understood as small polarons in an antiferromagnetic, highly electron correlated background, while the doped compounds require an anisotropic electron-phonon vertex to detail the prominent mode coupling signatures in the superconducting state. Electronic vertex corrections to the electron-phonon coupling furthermore may enhance, and for certain phonons, determine, the anisotropy of the electron-phonon coupling. A consistent picture emerges of the cuprates, combining strong, anisotropic electron-phonon coupling, particular phonon modes that could give rise to such a coupling, and an electron-electron interaction modifying the el-ph vertex.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Phase diagram of chiral quark matter: From weakly to strongly coupled Fulde-Ferrell phase

We calculate the phase diagram of two-flavor quark matter within the Nambu-Jona-Lasinio (NJL) model in the temperature-flavor asymmetry plane in the case where there are three competing phases: the homogeneous Bardeen-Cooper-Schrieffer (BCS) phase, the unpaired phase, and a phase with broken spatial symmetry, which is here taken to be the counterpart of the Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) phase in condensed matter physics. The system belongs to the universality class of paramagnetic-ferromagnetic-helical systems, and therefore contains a tricritical Lifshitz point in its phase diagram, where the momentum scale characterizing the breaking of translational invariance has a critical exponent of 1/2 to leading order. Upon varying the coupling constant of the theory we find that in weak coupling, the FFLO phase is favored at arbitrary flavor asymmetries for sufficiently low temperatures; at intermediate coupling its occupancy domain is shifted towards larger asymmetries. Strong coupling features a new regime of an inhomogeneous FF state, which we identify with a current-carrying Bose-Einstein condensate of tightly bound up and down quarks. The temperature and asymmetry dependence of the gap function is studied. It is shown that the anomalous temperature dependence of the gap in the homogeneous, flavor-asymmetric phase is transformed into a normal dependence (self-similar to the BCS phase) at arbitrary coupling, once the FF phase is allowed for. We analyze the occupation numbers and the Cooper-pair wave function and show that when the condensate momentum is orthogonal to the particle momentum the minority component contains a blocking region (breach) around the Fermi sphere in the weak-coupling limit, which engulfs more low-momentum modes as the coupling is increased, and eventually leads to a topological change in strong coupling, where the minority Fermi sphere contains either two occupied strips or an empty sphere. For nonorthogonal momenta, the blocking region is either reduced or extinct, i.e., no topological changes are observed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Coupled motion of asymmetrical tilt grain boundaries: Molecular dynamics and phase field crystal simulations

Previous simulation and experimental studies have shown that some grain boundaries (GBs) can couple to applied shear stresses and be moved by them, producing shear deformation of the lattice traversed by their motion. While this coupling effect has been well confirmed for symmetrical tilt GBs, little is known about the coupling ability of asymmetrical boundaries. In this work we apply a combination of molecular dynamics and phase field crystal simulations to investigate stress-driven motion of asymmetrical GBs between cubic crystals over the entire range of inclination angles. Our main findings are that the coupling effect exists for most of the asymmetrical GBs and that the coupling factor exhibits a non-trivial dependence on both the misorientation and inclination angles. This dependence is characterized by a discontinuous change of sign of the coupling factor, which reflects a transition between two different coupling modes over a narrow range of angles. Importantly, the magnitude of the coupling factor becomes large or divergent within this transition region, thereby giving rise to a sliding-like behavior. Our results are interpreted in terms of a diagram presenting the domains of existence of the two coupling modes and the transition region between them in the plane of misorientation and inclination angles. The simulations reveal some of the dislocation mechanisms responsible for the motion of asymmetrical tilt GBs. Furthermore, the results of this study compare favorably with existing experimental measurements and provide a theoretical ground for the design of future experiments.

36 MATERIALS SCIENCE↗

Advanced multiphysics coupling for LWR fuel performance analysis

Even the most basic nuclear fuel analysis is a multiphysics undertaking, as a credible simulation must consider at a minimum coupled heat conduction and mechanical deformation. The need for more realistic fuel modeling under a variety of conditions invariably leads to a desire to include coupling between a more complete set of the physical phenomena influencing fuel behavior, including neutronics, thermal hydraulics, and mechanisms occurring at lower length scales. This paper covers current efforts toward coupled multiphysics LWR fuel modeling in three main areas. The first area covered in this paper concerns thermomechanical coupling. The interaction of these two physics, particularly related to the feedback effect associated with heat transfer and mechanical contact at the fuel/clad gap, provides numerous computational challenges. An outline is provided of an effective approach used to manage the nonlinearities associated with an evolving gap in BISON, a nuclear fuel performance application. A second type of multiphysics coupling described here is that of coupling neutronics with thermomechanical LWR fuel performance. DeCART, a high-fidelity core analysis program based on the method of characteristics, has been coupled to BISON. DeCART provides sub-pin level resolution of the multigroup neutron flux, with resonance treatment, during a depletion or a fast transient simulation. Two-way coupling between these codes was achieved by mapping fission rate density and fast neutron flux fields from DeCART to BISON and the temperature field from BISON to DeCART while employing a Picard iterative algorithm. Finally, the need for multiscale coupling is considered. Fission gas production and evolution significantly impact fuel performance by causing swelling, a reduction in the thermal conductivity, and fission gas release. The mechanisms involved occur at the atomistic and grain scale and are therefore not the domain of a fuel performance code. However, it is possible to use lower length scale models such as those used in the mesoscale MARMOT code to compute average properties, e.g. swelling or thermal conductivity. These may then be used by an engineering-scale model. Examples of this type of multiscale, multiphysics modeling are shown.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Ultrafast Dynamics of Plasmon-Coupled Excitons in Semiconducting Nanoplatelets

Exciton-plasmon coupling in nanomaterials produces many relevant phenomena for photonics applications including increased light-matter interactions, enhanced radiative rates of quantum emitters, and coherent energy exchange. In the case of exciton coupling to surface plasmon polaritons (SPPs), dispersive interactions controlled by the wavevector of optical excitation create the opportunity for tunable optical emission. Strong temporal impacts on exciton lifetimes can also occur in coupled systems, creating the opportunity for ultrafast control of exciton lifetime via changes in electronic coupling magnitude to a dispersive SPP. The coupling strength can be impacted by the morphology of the nanomaterials. Here, in this study, we utilize colloidal semiconductor nanoplatelets deposited onto thin silver plasmonic films, and compare the results to semiconductor quantum dots deposited on the silver films. We map the dispersion of the coupled systems and measure the ultrafast transient absorption response of the coupled systems. Due to the larger interaction areas of the nanoplatelets that lie flat on the silver films, a greater degree of coupling is found for the nanoplatelets, and much faster temporal responses are found as compared to quantum dots. Fresnel theory calculations that incorporate heavy and light hole features can reproduce the dispersion of the nanoplatelet-silver film, and a simple three-state model is developed to provide insights into the nature of the coupling at different photon energies along the dispersion curve.

colloidal semiconductor nanoplatelets↗

Engineering giant excitonic coupling in bioinspired, covalently bridged BODIPY dyads

Strong excitonic coupling in photosynthetic systems is believed to enable efficient light absorption and quantitative charge separation, motivating the development of artificial multi-chromophore arrays with equally strong or even stronger excitonic coupling. However, large excitonic coupling strengths have typically been accompanied by fast non-radiative recombination, limiting the potential of the arrays for solar energy conversion as well as other applications such as fluorescent labeling. Here, in this work, we report giant excitonic coupling leading to broad optical absorption in bioinspired BODIPY dyads that have high photostability, excited-state lifetimes at the nanosecond scale, and fluorescence quantum yields of nearly 50%. Through the synthesis, spectroscopic characterization, and computational modeling of a series of dyads with different linking moieties, we show that the strongest coupling is obtained with diethynylmaleimide linkers, for which the coupling occurs through space between BODIPY units with small separations and slipped co-facial orientations. Other linkers allow for broad tuning of both the relative through-bond and through-space coupling contributions and the overall strength of interpigment coupling, with a tradeoff observed in general between the strength of the two coupling mechanisms. These findings open the door to the synthesis of molecular systems that function effectively as light-harvesting antennas and as electron donors or acceptors for solar energy conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of particle loading and phase coupling on gas–solid flow dynamics: A case study of a two-phase, gas–solid flow in an annular pipe

The present study is devoted to a two-phase, gas–solid flow in an annular pipe (hollow cylinder) at an elevated pressure of 15 bars and moderate Reynolds number of circa 6000. The influence of the particle loading, the interaction between the phases, and turbulence dispersion on the flow dynamics is systematically studied by means of computational fluid dynamics simulations, employing the Ansys FLUENT commercial package. The cases with a particle volumetric fraction of 1.2% are referred to as “high particle loading,” and those with 0.13% are denoted as “low particle loading.” The following cases are investigated: (1) pure gas flow; (2) low particle loading two-phase flow with one-way coupling and with turbulence dispersion; (3) low particle loading two-phase flow with two-way coupling but without turbulence dispersion; (4) low particle loading two-phase flow with two-way coupling and with turbulence dispersion; (5) high particle loading two-phase flow with one-way coupling and with turbulence dispersion; (6) high particle loading two-phase flow with two-way coupling but without turbulence dispersion; and (7) high particle loading two-phase flow with two-way coupling and with turbulence dispersion. Additionally, the boundary layer is found to grow without fluctuations of the turbulent kinetic energy (TKE) for cases 1, 2, and 5. For case 4, the TKE fluctuations have been identified, although they appear to be less substantial than those in cases 6 and 7. The authors attribute the semi-chaotic nature of the TKE fluctuations to the particle loading and two-way coupling. In addition, the onset and development of the flow instability have been observed at a random axial distance in cases 4, 6, and 7. Such instability is also attributed to the two-way coupling with turbulence dispersion in the flow. It is concluded that the particle loading, one-way, or two-way coupling between the phases, and the turbulence dispersion models significantly influence the development of the flow dynamics with the same inlet and boundary conditions. Consequently, it is not a trivial question, which result a user should trust. The present computational results inspire to perform verification as well as experimental validation of the simulations, so the simulation results can subsequently be used with confidence for design analysis.

42 ENGINEERING↗