Search NASA⌕ Search

SEARCH · Search NASA

Results for “Coordinate transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Polar Plate Theory for Orthogonal Anisotropy

Laminated fiber-reinforced (or filamentary) composites are used today for their high strength-to-weight and stiffness-to-weight ratios. However, because of the anisotropic behavior of composites, determining the response on a macroscopic scale is challenging. This is particularly evident in the evaluation of the governing differential equations of a circular disk with the fibers of the lamina oriented with rectilinear orthogonality. This includes any situation involving a composite plate of circular geometry in which out-of-plane displacements due to load are desired, such as fastener pull through loading of a composite plate. Current analysis techniques use numerical methods with rectilinear coordinate systems to solve problems with circular geometry. These analyses over predict plate stiffness by 20% and underpredict failure by 70%. Consequently, there is a need to transform classical composite plate theory to a polar coordinate system. In order to better analyze structures with circular geometries the classical composite plate equations are transformed into the plate equations for a rectilinearly anisotropic composite in polar coordinates. A composite plate is typically a laminate of fibers in rectilinear directions. Subsequent to the lay-tip the necessary geometry is cut out of a rectangular plate. In a similar manner, the derivation of the plate equation starts with the fundamental definitions of strain, displacement and curvature and incorporates the material property angular dependence into the equilibrium equations for a differential polar element. In the transformed state, the stiffness coefficients are no longer constant, adding to the complexity of the governing differential equations. This paper discusses the new derivation and evaluation of the plate equations for a circular composite disk with orthogonal rectilinear anisotropy. The resultant new three partial differential equations, which describe the circular anisotropic plate, can be used to evaluate out-of-plane displacements for given load conditions in design of composite Structures. Without the formation of these unique plate equations, design of such structures is not a precise engineering accomplishment due to the lack of precise design tools. Such structures are over designed to compensate and costly tests need to be performed after production to validate safety. Though impossible to present the mathematical solution within the limits of this paper, the application of the newly derived plate equation in its orthotropic form for a balanced symmetric laminate compared favorably with test results and surpassed the results of standard numerical methods. Within the limitations of the problem foundation the predictive model provides a mechanism for establishing out-of-plane deflection levels for a circular composite plate. Future work in this area should include incorporating the circular composite plate equations in Finite Element Models. The new anisotropic polar plate equations call be utilized as a design tool so that the design more accurately meets the requirements, thus taking full advantage of the weight savings of composites. These accomplishments have not previously been presented to the engineering community nor ever proposed to the IAF. Should the proposed paper be accepted for presentation, attendance is assured.

Bailey, Michelle D.↗

The non-uniform transformation strain problem for an anisotropic ellipsoidal inclusion

The problem of an anisotropic ellipsoidal inclusion which undergoes a stress-free transformation strain (in the sense of J. D. Eshelby) is considered, and the following theorem is proved: if an ellipsoidal region in an infinite anisotropic linear elastic medium undergoes, in the absence of its surroundings, a stress-free transformation strain which is a polynomial of degree M in given position coordinates, then the final stress and strain state in the transformed inclusion, when constrained by its surroundings, is also a polynomial of degree M in those position coordinates.

Asaro, R. J.↗

High-Pressure $γ$-CaMgSi 2 O 6 : Does Penta-Coordinated Silicon Exist in the Earth's Mantle?

We report in situ X-ray diffraction experiments with natural Fe- and Al- bearing diopside single crystals and density functional theory (DFT) calculations on diopside end-member composition indicate the existence of a new high-pressure γ-diopside polymorph with rare penta-coordinated silicon. On compression $α$-diopside transforms to the $γ$-phase at ~50 GPa, which in turn, on decompression is observed to convert to the known $β$-phase below 47 GPa. The new $γ$-diopside polymorph constitutes another recent example of penta-coordinated silicon ( V Si) in overcompressed metastable crystalline silicates, suggesting that V Si may exist in the transition zone and the uppermost lower mantle in appreciable quantities, not only in silicate glass and melts but also in crystalline phases contained in the coldest parts of subducted stagnant slabs. V Si may have significant influences on buoyancy, wave velocity anomalies, deformation mechanisms, chemical reactivity of silicate rocks, and seismicity within the slab.

58 GEOSCIENCES↗

Determination of deformations as a result of seismic loadings on two-dimensional reinforced concrete frame via terrestrial laser scanners

Parallel to the technological developments, methods of defining locational data are changing. Laser scanners bring new advantages to engineering measurements and geodesy. Terrestrial laser scanners, which have previously been used in map engineering, have become an alternative method of measurement, especially for terrestrial applications. A common characteristic of deformation measurements is the requirement to measure the location of sufficient reference and object points established on the monitored structure. The number of reference and object points is limited when using classical methods, but not when using a laser scanner. Due to the limitations of classical geodetic survey methods, such as difficulty of application, high costs and low production speed, the present study applied ground laser scanners to deformation monitoring. A two-dimensional (2D) deformation survey was made of a concrete frame placed on a loading wall. Cartesian coordinates, derived from survey and evaluations, were converted into a standard coordinate system using the Molodensky–Badekas 3D similarity transformation. Student’s t test has been used to determine whether it was significant with the difference of coordinates or not. The deformation amounts and directions obtained from the electronic tachymeter and ground laser scanners were found to be very similar.

42 ENGINEERING↗

The theory of the gravitational potential applied to orbit prediction

A complete derivation of the geopotential function and its gradient is presented. Also included is the transformation of Laplace's equation from Cartesian to spherical coordinates. The analytic solution to Laplace's equation is obtained from the transformed version, in the classical manner of separating the variables. A cursory introduction to the method devised by Pines, using direction cosines to express the orientation of a point in space, is presented together with sample computer program listings for computing the geopotential function and the components of its gradient. The use of the geopotential function is illustrated.

Kirkpatrick, J. C.↗

Coherence Conversion for Optimized Resolution in Optical Measurements - Example of Femtosecond Time Resolution Using the Transverse Coherence of 100-Picosecond X-Rays

A way is proposed to obtain a femtosecond time resolution over a picosecond range in x-ray spectroscopic measurements where the light source and the detector are much slower than that. It is based on the invariance of the modulus of the Fourier transform to object translations. The method geometrically correlates time in the sample with x-ray amplitudes over a spatial coordinate, and then takes the optical Fourier transform through far-field diffraction. Thus, explicitly time-invariant intensities that encode the time evolution of the sample can be measured with a slow detector. This corresponds to a phase-space transformation that converts the transverse coherence to become effective in the longitudinal direction. Because synchrotron-radiation sources have highly anisotropic coherence properties with about $10^5$ longitudinal electromagnetic-field modes at 1 eV bandwidth, but only tens to hundreds transverse modes, coherence conversion can drastically improve the time resolution. Reconstruction of the femtosecond time evolution in the sample from the Fourier intensities is subject to a phase ambiguity that is well-known in crystallography. However, a way is presented to resolve it that is not available in that discipline. Finally, data from a demonstration experiment are presented. The same concept can be used to obtain attosecond time resolution with an x-ray free-electron laser.

Adams, Bernhard W.↗

SU-F-BRB-05: Collision Avoidance Mapping Using Consumer 3D Camera

Purpose: To develop a fast and economical method of scanning a patient’s full body contour for use in collision avoidance mapping without the use of ionizing radiation. Methods: Two consumer level 3D cameras used in electronic gaming were placed in a CT simulator room to scan a phantom patient set up in a high collision probability position. A registration pattern and computer vision algorithms were used to transform the scan into the appropriate coordinate systems. The cameras were then used to scan the surface of a gantry in the treatment vault. Each scan was converted into a polygon mesh for collision testing in a general purpose polygon interference algorithm. All clinically relevant transforms were applied to the gantry and patient support to create a map of all possible collisions. The map was then tested for accuracy by physically testing the collisions with the phantom in the vault. Results: The scanning fidelity of both the gantry and patient was sufficient to produce a collision prediction accuracy of 97.1% with 64620 geometry states tested in 11.5 s. The total scanning time including computation, transformation, and generation was 22.3 seconds. Conclusion: Our results demonstrate an economical system to generate collision avoidance maps. Future work includes testing the speed of the framework in real-time collision avoidance scenarios. Research partially supported by a grant from Varian Medical Systems.

60 APPLIED LIFE SCIENCES↗

Improving 3D Wavelet-Based Compression of Hyperspectral Images

Two methods of increasing the effectiveness of three-dimensional (3D) wavelet-based compression of hyperspectral images have been developed. (As used here, images signifies both images and digital data representing images.) The methods are oriented toward reducing or eliminating detrimental effects of a phenomenon, referred to as spectral ringing, that is described below. In 3D wavelet-based compression, an image is represented by a multiresolution wavelet decomposition consisting of several subbands obtained by applying wavelet transforms in the two spatial dimensions corresponding to the two spatial coordinate axes of the image plane, and by applying wavelet transforms in the spectral dimension. Spectral ringing is named after the more familiar spatial ringing (spurious spatial oscillations) that can be seen parallel to and near edges in ordinary images reconstructed from compressed data. These ringing phenomena are attributable to effects of quantization. In hyperspectral data, the individual spectral bands play the role of edges, causing spurious oscillations to occur in the spectral dimension. In the absence of such corrective measures as the present two methods, spectral ringing can manifest itself as systematic biases in some reconstructed spectral bands and can reduce the effectiveness of compression of spatially-low-pass subbands. One of the two methods is denoted mean subtraction. The basic idea of this method is to subtract mean values from spatial planes of spatially low-pass subbands prior to encoding, because (a) such spatial planes often have mean values that are far from zero and (b) zero-mean data are better suited for compression by methods that are effective for subbands of two-dimensional (2D) images. In this method, after the 3D wavelet decomposition is performed, mean values are computed for and subtracted from each spatial plane of each spatially-low-pass subband. The resulting data are converted to sign-magnitude form and compressed in a manner similar to that of a baseline hyperspectral- image-compression method. The mean values are encoded in the compressed bit stream and added back to the data at the appropriate decompression step. The overhead incurred by encoding the mean values only a few bits per spectral band is negligible with respect to the huge size of a typical hyperspectral data set. The other method is denoted modified decomposition. This method is so named because it involves a modified version of a commonly used multiresolution wavelet decomposition, known in the art as the 3D Mallat decomposition, in which (a) the first of multiple stages of a 3D wavelet transform is applied to the entire dataset and (b) subsequent stages are applied only to the horizontally-, vertically-, and spectrally-low-pass subband from the preceding stage. In the modified decomposition, in stages after the first, not only is the spatially-low-pass, spectrally-low-pass subband further decomposed, but also spatially-low-pass, spectrally-high-pass subbands are further decomposed spatially. Either method can be used alone to improve the quality of a reconstructed image (see figure). Alternatively, the two methods can be combined by first performing modified decomposition, then subtracting the mean values from spatial planes of spatially-low-pass subbands.

Klimesh, Matthew↗

Sharply curved turn around duct flow predictions using spectral partitioning of the turbulent kinetic energy and a pressure modified wall law

Computational predictions of turbulent flow in sharply curved 180 degree turn around ducts are presented. The CNS2D computer code is used to solve the equations of motion for two-dimensional incompressible flows transformed to a nonorthogonal body-fitted coordinate system. This procedure incorporates the pressure velocity correction algorithm SIMPLE-C to iteratively solve a discretized form of the transformed equations. A multiple scale turbulence model based on simplified spectral partitioning is employed to obtain closure. Flow field predictions utilizing the multiple scale model are compared to features predicted by the traditional single scale k-epsilon model. Tuning parameter sensitivities of the multiple scale model applied to turn around duct flows are also determined. In addition, a wall function approach based on a wall law suitable for incompressible turbulent boundary layers under strong adverse pressure gradients is tested. Turn around duct flow characteristics utilizing this modified wall law are presented and compared to results based on a standard wall treatment.

Santi, L. Michael↗

Geometrical interpretation of optical absorption

We reinterpret the transfer matrix for an absorbing system in very simple geometrical terms. In appropriate variables, the system appears as performing a Lorentz transformation in a (1 + 3)-dimensional space. Using homogeneous coordinates, we map that action on the unit sphere, which is at the realm of the Klein model of hyperbolic geometry. The effects of absorption appear then as a loxodromic transformation, that is, a rhumb line crossing all the meridians at the same angle.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coordination in Large Collectives

Finding the subset of a set of imperfect devices (e.g., nano or micro devices) that results in the best aggregate device is a challenging problem. It is an abstraction of what will likely be a major difficulty in designing and controlling systems of nano or micro-scale components, particularly when a large fraction of those components may be unreliable. Rather than approaching this as a passive search problem, we transform the problem into one of coordination in a complex system by imbuing each device with simple decision making ability. In doing so we face the challenge of determining what each component should attempt to do so that the collective behavior solves the overall problem. Furthermore, in this padicular instance, we face problems of scaling (number of components in the thousands to tens of thousands), observability (components have limited sensing capabilities), and reliability (the components are faulty). We present an approach based on deriving component goals that are aligned with the overall system goal (e.g., forming best aggregate device), and can be computed using information readily (e.g., locally) available to the components. Then, each component in such a collective uses a simple reinforcement learning algorithm to selfishly pursue its own goals. Because those goals are derived in a principled manner, there is no need to use external mechanisms to force collaboration or coordination among the components to ensure that the system reaches a globally desirable solution. The results show that not only this approach provides improvements of over an order of magnitude over both traditional search methods and traditional multi-agent methods, but that the gains increase with the size of the system. This latter result makes this method ideal for domains where the number of components is currently in the thousands and will reach millions in the near future.

Tumer, Kagan↗

Structural analysis of WO 3 -TeO 2 glasses by neutron, high energy X-ray diffraction, reverse Monte Carlo simulations and XANES

The structure of WO 3 -TeO 2 glasses containing 15, 20 and 25 mol% WO 3 are studied by neutron diffraction (ND), high energy X-ray diffraction (XRD) and X-ray Absorption Near Edge spectroscopy (XANES). The short-range structural properties of glasses i.e. Te-O and W-O speciation, coordination number distributions, bond-lengths, and the O-Te-O, O-W-O and O-O-O bond angle distributions in the glass network are determined by the Reverse Monte Carlo (RMC) simulations of the ND and XRD data. RMC technique successfully determined all partial pair correlation functions and the coordination number distributions revealed that glass network consists predominantly of TeO 4 and WO 4 units with small amounts of triangular, penta and hexa co-ordinated units. The average W-O and Te-O bond lengths are in the ranges: 1.69-1.75 +/- 0.01 angstrom and 1.99-2.00 +/- 0.01 angstrom respectively. Both W-O and Te-O correlation peaks are asymmetrical, that indicate a distribution of their bond lengths in the respective structural units. The O-Te-O bond angle distribution has a peak at 107 +/- 2 degrees. Similarly the O-W-O bond angle distribution has a peak at 108 +/- 5 degrees. On increasing the WO3 concentration from 15 to 25 mol%, the average Te-O coordination number decreases from 3.80 to 3.61 +/- 0.02 due to the structural transformation: TeO 4 → TeO 3 , similarly the W-O coordination also decreases and is in the range: 3.79-3.67 +/- 0.02. XANES studies found that the oxidation state of Te and W ions in the glasses are 4 + and 6 + respectively.

36 MATERIALS SCIENCE↗

Raynal–Revai coefficients for a general kinematic rotation

In a three-body system, transitions between different sets of normalized Jacobi coordinates are described as general kinematic transformations that include an orthogonal or a pseudoorthogonal rotation. For such rotations, the Raynal–Revai coefficients execute a unitary transformation between three-body hyperspherical functions. Recurrence relations that make it possible to calculate the Raynal–Revai coefficients for arbitrary angular momenta are derived on the basis of linearized representations of products of hyperspherical functions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electric Current Filamentation Induced by 3D Plasma Flows in the Solar Corona

Many magnetic structures in the solar atmosphere evolve rather slowly, so they can be assumed as (quasi-)static or (quasi-)stationary and represented via magnetohydrostatic (MHS) or stationary magnetohydrodynamic (MHD) equilibria, respectively. While exact 3D solutions would be desired, they are extremely difficult to find in stationary MHD. We construct solutions with magnetic and flow vector fields that have three components depending on all three coordinates. We show that the noncanonical transformation method produces quasi-3D solutions of stationary MHD by mapping 2D or 2.5D MHS equilibria to corresponding stationary MHD states, that is, states that display the same field-line structure as the original MHS equilibria. These stationary MHD states exist on magnetic flux surfaces of the original 2D MHS states. Although the flux surfaces and therefore also the equilibria have a 2D character, these stationary MHD states depend on all three coordinates and display highly complex currents. The existence of geometrically complex 3D currents within symmetric field-line structures provides the basis for efficient dissipation of the magnetic energy in the solar corona by ohmic heating. We also discuss the possibility of maintaining an important subset of nonlinear MHS states, namely force-free fields, by stationary flows. We find that force-free fields with nonlinear flows only arise under severe restrictions of the field-line geometry and of the magnetic flux density distribution.

79 ASTRONOMY AND ASTROPHYSICS↗

Conformal coordinates associated with space-like motions

Conformal transformations in two dimensions provide a simple extension of the Lorentz transformation. The velocity of light appears in such transformations as a singular velocity rather than as an upper limit for the velocity. A well ordered branch of the theory exists for velocities in excess of the velocity of light. If the velocity of a point exceeds the singular velocity in an inertial system, then the conformal representation of the motion is no longer uniform, but contains a folded region. However, the branching of the transformation may be determined so that the elapsed time along the path of such a motion remains positive. Kinematic relations on the other side of the singular velocity seem to complement the usual results of relativity theory in an interesting way. Thus it is known that motion at the speed of light occurs along a null geodesic, and hence corresponds in a certain sense to motion at infinite velocity. The complementary relation is that a motion of infinite velocity corresponds in the same sense to motion at the speed of light.

Jones, R. T.↗

Matrix transformations for spacecraft attitude determination

A common problem for experimental space physicists is the determination of the attitude matrix T which transforms vectors between representations in X and X' coordinate systems according to (vector V sub X) = (T sub XX')(vector V sub X'). A straightforward, simple, and efficient solution for the transformation matrix is a double-cross transformation. It is calculated from any two directions A and B, which are vectors normalized to unit length and are known in both X and X' coordinates. The B direction need be known only well enough to define the plane in which vectors A and B lie. The problem of the intersection of two cones as applicable to attitude solutions is also discussed.

Cauffman, D. P.↗

Disordered interfaces of alkaline aluminate salt hydrates provide glimpses of Al 3+ coordination changes

Hypothesis: The precipitation and dissolution of aluminum-bearing mineral phases in aqueous systems often proceed via changes in both aluminum coordination number and connectivity, complicating molecular-scale interpretation of the transformation mechanism. Here, the thermally induced transformation of crystalline sodium aluminum salt hydrate, a phase comprised of monomeric octahedrally coordinated aluminate which is of relevance to industrial aluminum processing, has been studied. Because intermediate aluminum coordination states during melting have not previously been detected, it is hypothesized that the transition to lower coordinated aluminum ions occurs within a highly disordered quasi-two-dimensional phase at the solid-solution interface. Experiments and simulations: In this work, in situ X-ray diffraction (XRD), Raman and 27 Al nuclear magnetic resonance (NMR) spectroscopy were used to monitor the melting transition of nonasodium aluminate hydrate (NSA, Na 9 [Al(OH) 6 ] 2 ·3(OH)·6H 2 O). A mechanistic interpretation was developed based on complementary classical molecular dynamics (CMD) simulations including enhanced sampling. A reactive forcefield was developed to bridge speciation in the solution and in the solid phase. Findings: In contrast to classical dissolution, aluminum coordination change proceeds through a dynamically stabilized ensemble of intermediate states in a disordered layer at the solid-solution interface. In both melting and dissolution of NSA, octahedral, monomeric aluminum transition through an intermediate of pentahedral coordination. The intermediate dehydroxylates to form tetrahedral aluminate (Al(OH)$_4^–$) in the liquid phase. This coordination change is concomitant with a breaking of the ionic aluminate-sodium ion linkages. The solution phase Al(OH)$_4^–$ ions subsequently polymerize into polynuclear aluminate ions. However, there are some differences between bulk melting and interfacial dissolution, with the onset of the surface-controlled process occurring at a lower temperature (~30 °C) and the coordination change taking place more gradually as a function of temperature. This work to determine the local structure and dynamics of aluminum in the disordered layer provides a new basis to understand mechanisms controlling aluminum phase transformations in highly alkaline solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Model-centric distribution automation: Capacity, reliability, and efficiency

A series of analyses along with field validations that evaluate efficiency, reliability, and capacity improvements of model-centric distribution automation are presented. With model-centric distribution automation, the same model is used from design to real-time control calculations. A 14-feeder system with 7 substations is considered. The analyses involve hourly time-varying loads and annual load growth factors. Phase balancing and capacitor redesign modifications are used to better prepare the system for distribution automation, where the designs are performed considering time-varying loads. Coordinated control of load tap changing transformers, line regulators, and switched capacitor banks is considered. In evaluating distribution automation versus traditional system design and operation, quasi-steady-state power flow analysis is used. In evaluating distribution automation performance for substation transformer failures, reconfiguration for restoration analysis is performed. In evaluating distribution automation for storm conditions, Monte Carlo simulations coupled with reconfiguration for restoration calculations are used. As a result, the evaluations demonstrate that model-centric distribution automation has positive effects on system efficiency, capacity, and reliability.

25 ENERGY STORAGE↗