Search NASA⌕ Search

SEARCH · Search NASA

Results for “Edge”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Edge energy transport barrier and turbulence in the I-mode regime on Alcator C-Mod

We report extended studies of the I-mode regime [Whyte et al., Nucl. Fusion 50, 105005 (2010)] obtained in the Alcator C-Mod tokamak [Marmar et al., Fusion Sci. Technol. 51(3), 3261 (2007)]. This regime, usually accessed with unfavorable ion B x {nabla}B drift, features an edge thermal transport barrier without a strong particle transport barrier. Steady I-modes have now been obtained with favorable B x {nabla}B drift, by using specific plasma shapes, as well as with unfavorable drift over a wider range of shapes and plasma parameters. With favorable drift, power thresholds are close to the standard scaling for L-H transitions, while with unfavorable drift they are {approx} 1.5-3 times higher, increasing with I{sub p}. Global energy confinement in both drift configurations is comparable to H-mode scalings, while density profiles and impurity confinement are close to those in L-mode. Transport analysis of the edge region shows a decrease in edge {chi}{sub eff}, by typically a factor of 3, between L- and I-mode. The decrease correlates with a drop in mid-frequency fluctuations (f{approx} 50-150 kHz) observed on both density and magnetics diagnostics. Edge fluctuations at higher frequencies often increase above L-mode levels, peaking at f{approx} 250 kHz. This weakly coherent mode is clearest and has narrowest width ({Delta}f/f{approx} 0.45) at low q{sub 95} and high T{sub ped}, up to 1 keV. The E{sub r} well in I-mode is intermediate between L- and H-mode and is dominated by the diamagnetic contribution in the impurity radial force balance, without the V{sub pol} shear typical of H-modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Local electronic structure analysis for brownmillerite Ca(Sr)FeO{sub 2.5} using site-resolved energy-loss near-edge structures

Oxygen K-edge and Fe L{sub 2,3}-edge electron energy-loss near-edge structures (ELNES) were measured for FeO{sub 6} octahedra and FeO{sub 4} tetrahedra in the brownmillerite Ca(Sr)FeO{sub 2.5} by focusing an electron probe at individual Fe sites using scanning transmission electron microscopy combined with electron energy-loss spectroscopy. The observed site-resolved oxygen K-ELNES showed different features reflecting the local chemical bonding around the FeO{sub 6} octahedra and FeO{sub 4} tetrahedra. A pre-peak in the O K-edge spectra, which is attributed to a transition to an unoccupied O 2p band hybridized with the Fe-3d band, shows splitting in the spectrum of the FeO{sub 6} octahedral site. Additionally, for the oxygen linking the octahedral and tetrahedral Fe sites in CaFeO{sub 2.5}, charge transfer was found to preferentially occur toward the tetrahedral Fe ions. In the case of SrFeO{sub 2.5}, charge transfer from the oxygen located in the ac plane was biased toward the tetrahedral Fe atoms. Based upon an analysis of the pre-peak intensity of the O K-ELNES, it was concluded that bonding between the oxygen and iron atoms at the tetrahedral site was more covalent in character than at the octahedral site. The strong covalent character of the tetrahedral sites would be one of the reasons for distortion in the FeO{sub 6} octahedra in Ca(Sr)FeO{sub 2.5}, as exhibited by an extension along the b-axis.

36 MATERIALS SCIENCE↗

Observation of Phase Objects by Using an X-ray Microscope with a Foucault Knife-Edge

An x-ray microscope with a zone plate was assembled at the synchrotron radiation source of BL3C, Photon Factory. A Foucault knife-edge was set at the back focal plate of the objective zone plate and phase retrieval was tested by scanning the knife-edge. A preliminary result shows that scanning the knife-edge during exposure was effective for phase retrieval. Phase-contrast tomography was investigated using differential projection images calculated from two Schlieren images with the oppositely oriented knife-edges. Fairly good reconstruction images of polystyrene beads and spores could be obtained.

43 PARTICLE ACCELERATORS↗

Influence of the Edge Plasma Profile and Parameters on the Coupling of an ICRH Antenna. Application to ITER

The coupling to the fast wave of an ICRH antenna is principally determined by its distance to an optimum plasma density correlated to the cutoff one and by the density gradient between this optimum density and the bulk plasma. This explains the differences in coupling for the various heating and current drive phasings as predicted for different plasma edge profiles considered for ITER. For a given electron density edge profile the ion mix, the steady magnetic field and the frequency have also a significant effect on the coupling performances. These quantities affect the coupling mainly by influencing the position of the optimum density in the profile. A marked perturbation of the coupling leading to a large edge power deposition can occur when the Alfven resonance lies in the edge profile. The results are applied to different ICRF scenarios considered for ITER at full and half toroidal field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radial profile measurement of electron temperature in edge stochastic magnetic field layer of LHD using intensity ratio of extreme ultraviolet line emissions

Vertical profile of neon line emissions in 30-650 A wavelength range has been observed in horizontally elongated plasma cross section of Large Helical Device (LHD). Intensity ratio between the neon line emissions is studied to measure the radial profile of electron temperature in the edge stochastic magnetic field layer of LHD. The edge temperature profile successfully obtained from the line ratio of NeVIII 2s-3p to 2p-3s transitions is compared with the simulation based on three-dimensional edge transport code. The result shows a reasonably good agreement with the edge temperature profile analyzed from atomic data and analysis structure code. The electron temperature at last closed flux surface measured from the intensity ratio is also in good agreement with that measured from Thomson scattering.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Time-dependent 2-D modeling of edge plasma transport with high intermittency due to blobs

The results on time-dependent 2-D fluid modeling of edge plasmas with non-diffusive intermittent transport across the magnetic field (termed cross-field) based on the novel macro-blob approach are presented. The capability of this approach to simulate the long temporal evolution ({approx}0.1 s) of the background plasma and simultaneously the fast spatiotemporal dynamics of blobs ({approx}10{sup -4} s) is demonstrated. An analysis of a periodic sequence of many macro-blobs (PSMB) is given showing that the resulting plasma attains a dynamic equilibrium. Plasma properties in the dynamic equilibrium are discussed. In PSMB modeling, the effect of macro-blob generation frequency on edge plasma parameters is studied. Comparison between PSMB modeling and experimental profile data is given. The calculations are performed for the same plasma discharge using two different models for anomalous cross-field transport: time-average convection and PSMB. Parametric analysis of edge plasma variation with transport coefficients in these models is presented. The capability of the models to accurately simulate enhanced transport due to blobs is compared. Impurity dynamics in edge plasma with macro-blobs is also studied showing strong impact of macro-blob on profiles of impurity charge states caused by enhanced outward transport of high-charge states and simultaneous inward transport of low-charge states towards the core. Macro-blobs cause enhancement of sputtering rates, increase radiation and impurity concentration in plasma, and change erosion/deposition patterns.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High electron mobility through the edge states in random networks of c-axis oriented wedge-shaped GaN nanowalls grown by molecular beam epitaxy

Transport and optical properties of random networks of c-axis oriented wedge-shaped GaN nanowalls grown spontaneously on c-plane sapphire substrates through molecular beam epitaxy are investigated. Our study suggests a one dimensional confinement of carriers at the top edges of these connected nanowalls, which results in a blue shift of the band edge luminescence, a reduction of the exciton-phonon coupling, and an enhancement of the exciton binding energy. Not only that, the yellow luminescence in these samples is found to be completely suppressed even at room temperature. All these changes are highly desirable for the enhancement of the luminescence efficiency of the material. More interestingly, the electron mobility through the network is found to be significantly higher than that is typically observed for GaN epitaxial films. This dramatic improvement is attributed to the transport of electrons through the edge states formed at the top edges of the nanowalls.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Simulations of drift resistive ballooning L-mode turbulence in the edge plasma of the DIII-D tokamak

Results from simulations of electromagnetic drift-resistive ballooning turbulence for tokamak edge turbulence in realistic single-null geometry are reported. The calculations are undertaken with the BOUT three-dimensional fluid code that solves Braginskii-based fluid equations [X. Q. Xu and R. H. Cohen, Contrib. Plasma Phys. 36, 158 (1998)]. The simulation setup models L-mode edge plasma parameters in the actual magnetic geometry of the DIII-D tokamak [J. L. Luxon et al., Fusion Sci. Technol. 48, 807 (2002)]. The computations track the development of drift-resistive ballooning turbulence in the edge region to saturation. Fluctuation amplitudes, fluctuation spectra, and particle and thermal fluxes are compared to experimental data near the outer midplane from Langmuir probe and beam-emission-spectroscopy for a few well-characterized L-mode discharges in DIII-D. The simulations are comprised of a suite of runs in which the physics model is varied to include more fluid fields and physics terms. The simulations yield results for fluctuation amplitudes, correlation lengths, particle and energy fluxes, and diffusivities that agree with measurements within an order of magnitude and within factors of 2 or better for some of the data. The agreement of the simulations with the experimental measurements varies with respect to including more physics in the model equations within the suite of models investigated. The simulations show stabilizing effects of sheared E × B poloidal rotation (imposed zonal flow) and of lower edge electron temperature and density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of purity, edge length, and growth area on field emission of multi-walled carbon nanotube emitter arrays

Present report aims to study the effect of purity, edge length, and growth area on field emission of patterned carbon nanotube (CNT) emitter arrays. For development of four CNT emitter arrays (CEAs), low resistively silicon substrates were coated with thin film of iron catalyst using photolithography, sputtering, and lift off process. Four CEAs were synthesized on these substrates using thermal chemical vapor deposition with minor changes in pretreatment duration. Out of these, two CEAs have 10 {mu}m Multiplication-Sign 10 {mu}m and 40 {mu}m Multiplication-Sign 40 {mu}m solid square dots of CNTs with constant 20 {mu}m inter-dot separation. Other two CEAs have ring square bundles of CNTs and these CEAs are envisioned as 10 {mu}m Multiplication-Sign 10 {mu}m square dots with 4 {mu}m Multiplication-Sign 4 {mu}m scooped out area and 15 {mu}m Multiplication-Sign 15 {mu}m square dots with 5 {mu}m Multiplication-Sign 5 {mu}m lift out area with constant 20 {mu}m inter-dot spacing. Solid square dot structures have exactly constant edge length per unit area with more than four-fold difference in CNT growth area however ring square dot patterns have minor difference in edge length per unit area with approximately two times difference in CNT growth area. Quality and morphology of synthesized CEAs were assessed by scanning electron microscope and Raman characterization which confirm major differences. Field emission of all CEAs was carried out under same vacuum condition and constant inter-electrode separation. Field emission of solid square dot CEAs show approximately identical current density-electric field curves and Fowler-Nordheim plots with little difference in emission current density at same electric field. Similar results were observed for ring square structure CEAs when compared separately. Maximum emission current density observed from these four CEAs reduces from 14.53, 12.23, 11.01, to 8.66 mA/cm{sup 2} at a constant electric field of 5 V/{mu}m, according to edge length of 1361.7, 1221.08, 872.20, to 872.16 mm rather than growth area and purity. Although, the 40 {mu}m Multiplication-Sign 40 {mu}m CEAs possessed highest CNT growth area of 8.7 mm{sup 2} and best purity defined in terms of lowest defect band to graphitic band ratio of 0.614, the current observed from this CEAs was least.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Temperature dependent electronic structure of Pr{sub 0.67}Sr{sub 0.33}MnO{sub 3} film probed by X-ray absorption near edge structure

The Mn K edge X-ray absorption near edge structures (XANES) of Pr{sub 0.67}Sr{sub 0.33}MnO{sub 3} film (100 nm) on (001) LaAlO{sub 3} substrate was measured at different temperatures to probe the MnO{sub 6} octahedron distortion and corresponding electronic structure. The absorption of high temperature paramagnetic-insulator phase differed from that of the low temperature ferromagnetic-metal phase. The temperature-dependent absorption intensity of Mn K edge XANES was correlated with the relaxation of distorted MnO{sub 6} octahedron, which changed the crystal field acting on the Mn site and the related electronic structure and properties. At low temperature, the splitting of Mn majority e{sub g} orbitals decreased and the density of states above the Fermi level increased in the relaxed MnO{sub 6} octahedron, as reflected by a wider separation between two sub-peaks in the pre-edge XANES spectra.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron spin magnetism of zigzag graphene nanoribbon edge states

The electron spin states of zigzag graphene nanoribbon (ZGNR) edge play a pivotal role in the applications of graphene nanoribbons. However, the exact arrangements of the electron spins remain unclear to date. In this report, the electronic spin states of the ZGNR edge have been elucidated through a combination of quantum chemical investigation and previous electron spin resonance experiment observations. An alternating α and β spin configuration of the unpaired electrons along the ZGNR edge is established in ambient condition without any external magnetic field, and the origin of the spin magnetism of the ZGNR edge is revealed. It paves a pathway for the understanding and design of graphene based electronic and spintronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic and transport properties edge functionalized graphene nanoribbons-An ab initio approach

With the help of ab initio approach we have investigated the electronic and transport properties of edge functionalized zigzag graphene nanoribbons using density functional theory. We have studied the energetic stability and Fermi energy of ZGNRs. We have reported that the edge functionalization of zigzag graphene nanoribbons can break the degeneracy that can be used to promote the onset of a semiconducting to metal transition or a half metal to semiconducting state. The edge functionalization also promotes a metal-semimetal transition. It has also been observed that the transmission spectrum of the edge functionalized ZGNRs are different from those of pristine.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electric field control of spin-resolved edge states in graphene quantum nanorings

The electric-field effect on the electronic and magnetic properties of triangular and hexagonal graphene quantum rings with zigzag edge termination is investigated by means of the single-band tight-binding Hamiltonian and the mean-field Hubbard model. It is shown how the electron and spin states in the nanoring structures can be manipulated by applying an electric field. We find different spin-depolarization behaviors with variation of electric field strength due to the dependence of spin densities on the shapes and edges of this kind of nanorings. In the case of triangular quantum rings, the magnetization on the inner and outer edges can be selectively tuned and the spin states depolarize gradually as the field strength is increased, while in the case of hexagonal nanorings, the transverse electric field reduces the magnetic moments on both inner and outer edges symmetrically and rapidly.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Predictions of the near edge transport shortfall in DIII-D L-mode plasmas using the trapped gyro-Landau-fluid model

Previous studies of DIII-D L-mode plasmas have shown that a transport shortfall exists in that our current models of turbulent transport can significantly underestimate the energy transport in the near edge region. In this paper, the Trapped Gyro-Landau-Fluid (TGLF) drift wave transport model is used to simulate the near edge transport in a DIII-D L-mode experiment designed to explore the impact of varying the safety factor on the shortfall. We find that the shortfall systematically increases with increasing safety factor and is more pronounced for the electrons than for the ions. Within the shortfall dataset, a single high current case has been found where no transport shortfall is predicted. Reduced neutral beam injection power has been identified as the key parameter separating this discharge from other discharges exhibiting a shortfall. Further analysis shows that the energy transport in the L-mode near edge region is not stiff according to TGLF. Unlike the H-mode core region, the predicted temperature profiles are relatively more responsive to changes in auxiliary heating power. In testing the fidelity of TGLF for the near edge region, we find that a recalibration of the collision model is warranted. A recalibration improves agreement between TGLF and nonlinear gyrokinetic simulations performed using the GYRO code with electron-ion collisions. The recalibration only slightly impacts the predicted shortfall.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Asymmetric edge modes by staggered potential in honeycomb lattice: Spin splitter

In honeycomb lattice with staggered potential such as silicene nanoribbon (SN) as used for illustrations here, we show that the lack of inversion symmetry due to buckled structure can lead to asymmetric edge modes where only one edge is utilized in transport, yielding no cross-walk (due to size effect) between edges. We also find asymmetric Hall accumulations formed because of the presence of staggered potential. Applying two opposite out-of-plane electric fields to two adjacent SNs appropriately, so that cross-walk occurs between two internal edge states, the bulk states serve as a spin-splitter that splits two specious of spins (spin-up and spin-down) into those two SNs. The spin-splitter proposed here does not require any magnetic field and thus manipulates spins in a full electric manner.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Urbach absorption edge in epitaxial erbium-doped silicon

We investigate the dependencies of the photocurrent in Si:Er p-n junctions on the energy of the incident photons. The exponential absorption edge (Urbach edge) just below fundamental edge of silicon was observed in the absorption spectra of epitaxial Si:Er layers grown at 400–600 C. It is shown that the introduction of erbium significantly enhances the structural disorder in the silicon crystal which was estimated from the slope of the Urbach edge. We discuss the possible nature of the structural disorder in Si:Er and a new mechanism of erbium excitation, which does not require the presence of deep levels in the band gap of silicon.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Edge-channel interferometer at the graphene quantum Hall pn junction

We demonstrate a quantum Hall edge-channel interferometer in a high-quality graphene pn junction under a high magnetic field. The co-propagating p and n quantum Hall edge channels traveling along the pn interface functions as a built-in Aharonov-Bohm-type interferometer, the interferences in which are sensitive to both the external magnetic field and the carrier concentration. The trajectories of peak and dip in the observed resistance oscillation are well reproduced by our numerical calculation that assumes magnetic flux quantization in the area enclosed by the co-propagating edge channels. Coherent nature of the co-propagating edge channels is confirmed by the checkerboard-like pattern in the dc-bias and magnetic-field dependences of the resistance oscillations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Graphite edge controlled registration of monolayer MoS{sub 2} crystal orientation

Transition metal dichalcogenides such as the semiconductor MoS{sub 2} are a class of two-dimensional crystals. The surface morphology and quality of MoS{sub 2} grown by chemical vapor deposition are examined using atomic force and scanning tunneling microscopy techniques. By analyzing the moiré patterns from several triangular MoS{sub 2} islands, we find that there exist at least five different superstructures and that the relative rotational angles between the MoS{sub 2} adlayer and graphite substrate lattices are typically less than 3°. We conclude that since MoS{sub 2} grows at graphite step-edges, it is the edge structure which controls the orientation of the islands, with those growing from zig-zag (or armchair) edges tending to orient with one lattice vector parallel (perpendicular) to the step-edge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗