Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLUIDIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

FY18Q1 Quarterly Report: Radiation Enhanced Diffusion of Ag, Ag-Pd, Eu, and Sr in Neutron Irradiated PyC/SiC Diffusion Couples

Obtaining accurate diffusion kinetics in materials representative of those found in tristructural-isotopic (TRISO) coated particle fuel is needed to predict the diffusive release of the same fission products in reactor. Planar diffusion couples with representative pyrocarbon (PyC) and silicon carbide (SiC) layers are being produced using the same fluidized-bed chemical vapor deposition (FB-CVD) technology used to produce TRISO particles from the first irradiation experiment of the Advanced Gas Reactor Fuel Qualification and Development Program (AGR). The layer properties of the planar diffusion couples are tailored to meet the specified PyC density and microstructure of the SiC layer as defined by the AGR program. The influence of these variables on diffusion is also being explored by producing PyC and SiC variants. The pathway to producing the diffusion couples is discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Chemics-Reactors: A Preliminary Python Program for Implementing Network Models of Multiphase Reactors

We discuss the design and implementation of a preliminary software package written in Python 3 that is intended to represent complex multiphase reactors as networks of ideal continuous stirred tank reactors. This software also implements statistical design of experiments, uncertainty quantification, and global sensitivity analysis. These advanced features can provide important qualitative and quantitative insights into the effect of operating conditions and model parameters on predicted reactor performance. We demonstrate the utility of the program by modeling the vapor phase catalytic upgrading of bio-oil in a bubbling fluidized bed reactor.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

FY18Q3 Quarterly Report: Radiation Enhanced Diffusion of Ag, Ag-Pd, Eu, and Sr in Neutron Irradiated PyC/SiC Diffusion Couples

Obtaining accurate diffusion kinetics in materials representative of those found in tristructural-isotopic (TRISO) coated particle fuel is needed to predict the diffusive release of fission products in reactor. Planar diffusion couples with representative pyrocarbon (PyC) and silicon carbide (SiC) layers are being produced using the same fluidized-bed chemical vapor deposition (FBCVD) technology used to produce TRISO particles from the first irradiation experiment of the Advanced Gas Reactor (AGR) Fuel Qualification and Development Program. The layer properties of the planar diffusion couples are tailored to meet the specified PyC density and microstructure of the SiC layer as defined by the AGR program. The influence of these variables on diffusion is also being explored by producing PyC and SiC variants. The pathway to producing the diffusion couples is discussed and builds upon efforts described in previous reports [1–3].

36 MATERIALS SCIENCE↗

Validation and optimization of batch and continuous particle separation processes

Recent advances in simulation capabilities coupled with advanced manufacturing can be leveraged to create highly efficient compact reactors with low emissions, low cost, high reliability, and high flexibility for energy conversion. This type of reactor is especially important for conversion of bio-mass, a storable, renewable and fast-growing energy source, considering the distributed nature of raw material and cost of biomass collection and transportation. To achieve this goal, it is critical to developing new process technologies that are significantly more efficient than traditional processes for which the added manufacture provides a fast way of realization and evaluation. Based upon the flagship MFiX multiphase computational fluid dynamic software suite, NETL has developed an Optimization Toolset to facilitate the CFD simulation based reactor design and optimization, and process intensification. This technical report presents the recent development and application of the Optimization Toolset and the framework for process optimization of particle separation in batch and continuous processes. In these processes, a fluidized bed reactor under proper operating condition was used to separate particles of different physical properties. MFiX-DEM simulations were conducted for a batch system to simulate the process covering a wide range of superficial gas velocities from which the optimal operational parameter can be determined through analyzing the system response. After successful demonstration of the framework, a continuous system for particle separation was designed based on CFD simulations. Similar optimization exercises were conducted for the continuous particle separation considering multiple operating parameters. The design was then fabricated in the laboratory through 3D printing for testing. The particle separation performance was carefully measured through high-speed video for particle tracking. Quantitative comparison between numerical results and experimental measurements were conducted for confirmation and validation.

30 DIRECT ENERGY CONVERSION↗

Biological System Characterization to Address Biofouling of the 200 West Pump-and-Treat Injection Wells

Contaminated groundwater in the 200W Area of the Hanford Site is being treated ex situ by the 200W Pump-and-Treat (P&T) Facility and the subsurface plume is under hydraulic containment. The 200W P&T Facility removes several contaminants of concern from groundwater, as well as nitrate. Facility capacity is constrained by biofouling of injection wells, which limits the ability to efficiently inject treated effluent water in to the subsurface. In a previous report, Thomle et al. provided a comprehensive engineering assessment of biofouling at the 200W P&T Facility. In that report, both operational changes and facility modifications were recommended to help mitigate the symptoms and consequences of biofouling by expanding treatment processes in the plant. The 200W P&T Facility’s fluidized bed reactor (FBR) is a biological treatment system that has been identified as a principal source of biofouling. Carbon and nutrient inputs to the FBR are needed to sustain high rates of activity, but can also be responsible for microbial proliferation in the effluent water distribution pipeline, and loss injection well capacity. The primary objective of this work was to fill critical knowledge gaps associated with the FBR that can be used to optimize the biological system for continuous operation and sustained performance.

54 ENVIRONMENTAL SCIENCES↗

Techno-economic Evaluation of Utility-Scale Power Plants Based on the Indirect sCO 2 Brayton Cycle - Report

This report presents the results of a techno-economic analysis (TEA) of a coal-fired utility scale power plant based on the indirect supercritical carbon dioxide (sCO 2 ) Brayton cycle using an oxy-fired circulating fluidized bed (CFB). A baseline plant configuration was examined as well as three variations to the sCO 2 power cycle examining the impact of reheat (Rht), main compressor intercooling (IC), and a combination of reheat and main compressor intercooling (RhtIC). Each plant configuration was assessed at two turbine inlet temperatures of 620 °C and 760 °C.

20 FOSSIL-FUELED POWER PLANTS↗

Techno-economic Evaluation of Utility-Scale Power Plants Based on the Indirect sCO2 Brayton Cycle - Presentation

This presentation discusses the results of a techno-economic analysis (TEA) of a coal-fired utility scale power plant based on the indirect supercritical carbon dioxide (sCO2) Brayton cycle using an oxy-fired circulating fluidized bed (CFB). A baseline plant configuration was examined as well as three variations to the sCO2 power cycle examining the impact of reheat (Rht), main compressor intercooling (IC), and a combination of reheat and main compressor intercooling (RhtIC). Each plant configuration was assessed at two turbine inlet temperatures of 620 °C and 760 °C.

Brayton power cycle↗

User Guide for the Public Industrial CO 2 Capture Retrofit Database Models

The United States (U.S.) Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) has produced three carbon capture retrofit databases (CCRDs), which contain a collection of units selected from the power generation and industrial sources (IND) sectors located in the United States that are either in operating or standby status. The power generation category is subdivided into the post-combustion (PC) CCRD – containing coal-fired and atmospheric fluidized bed (AFB) units – and the natural gas combined cycle (NGCC) CCRD – containing natural gas-fired combined cycle and combined cycle single shaft units. The IND CCRD contains facilities from the ammonia, cement, ethanol, hydrogen, and natural gas processing industries. This report is intended to provide a general guide to the IND CCRD. Efforts have been made to ensure similarities between each of the CCRDs. However, as the sources of CO2 vary, differences will exist – most notably in the IND CCRD.

03 NATURAL GAS↗

User Guide for the Public PC and NGCC CO 2 Capture Retrofit Database Models

The United States (U.S.) Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) has produced three carbon capture retrofit databases (CCRDs), which contain a collection of units selected from the power generation and industrial sources (IND) sectors located in the United States that are either in operating or standby status. The power generation category is subdivided into the post-combustion (PC) CCRD – containing coal-fired and atmospheric fluidized bed (AFB) units – and the natural gas combined cycle (NGCC) CCRD – containing natural gas-fired combined cycle and combined cycle single shaft units. The IND CCRD contains facilities from the ammonia, cement, ethanol, hydrogen, and natural gas processing industries. Public versions of these databases were created for use by individuals interested in exploring the impact of retrofitting plants with carbon capture. The power versions contain data from the NETL baseline reports as examples of information that a user can enter for plants of interest. This report is intended to provide a general guide to each of the power CCRDs. Efforts have been made to ensure similarities between each of the CCRDs. However, as the sources of CO 2 vary, differences will exist – most notably in the IND CCRD. Therefore, the PC and NGCC CCRDs are discussed in this guide.

20 FOSSIL-FUELED POWER PLANTS↗

Cost and Performance Baseline for Fossil Energy Plants - Volume 3b: Low Rank Coal to Electricity: Combustion Cases

The Cost and Performance Baseline for Fossil Energy Power Plants Study, Volume 3b: Low Rank Coal to Electricity establishes performance and cost data for fossil energy power systems, specifically pulverized coal (PC) and circulating fluidized bed combustor (CFBC) plants all with and without carbon capture and sequestration. The analyses were performed on a consistent technical and economic basis that accurately reflects current market conditions. The study serves as a benchmark to track the progress of DOE Advanced Power Systems R&D and as a baseline for analyzing fossil energy plant options.

01 COAL, LIGNITE, AND PEAT↗

Cost and Performance Baseline for Fossil Energy Plants - Volume 3c: Natural Gas Combined Cycle at Elevation

The Cost and Performance Baseline for Fossil Energy Power Plants Study, Volume 3b: Low Rank Coal to Electricity establishes performance and cost data for fossil energy power systems, specifically pulverized coal (PC) and circulating fluidized bed combustor (CFBC) plants all with and without carbon capture and sequestration. The analyses were performed on a consistent technical and economic basis that accurately reflects current market conditions. The study serves as a benchmark to track the progress of DOE Advanced Power Systems R&D and as a baseline for analyzing fossil energy plant options.

03 NATURAL GAS↗

Dover Light & Power 10 MWe Coal Direct Chemical Looping (CDCL) (Large Pilot Plant Test - Phase I Feasibility)

A feasibility study was conducted to install a 10 MWe coal direct chemical looping large pilot plant at a host site. The coal direct chemical looping technology was based on The Ohio State University and Babcock & Wilcox iron-based metal oxide technology coupling a moving bed reduction reactor with a circulating fluidized-bed oxidation reactor. The host site was the Dover Light & power Plant in Dover, Ohio. The Electric Power Research Institute performed the host site evaluation. Trinity Consultants prepared the Environmental Information Volume. WorleyParsons Group performed the civil engineering. Clear Skies Consulting served as lead on the Industrial Advisory Committee.

20 FOSSIL-FUELED POWER PLANTS↗

Additional Confirmatory LBL Analysis of AGR-5/6/7 Compacts and Over-Coated Particles

Fuel compacts for the Advanced Gas Reactor Fuel Development and Qualification (AGR) Program’s AGR-5/6/7 irradiation test in the Idaho National Laboratory (INL) Advanced Test Reactor (ATR) were fabricated by BWX Technologies Nuclear Operations Group (BWXT NOG) located in Lynchburg, Virginia. Two compact packing fractions (PFs) were produced - nominally, 40% PF and 25% PF - in which the tristructural-isotropic (TRISO)-coated particle volume was targeted to be approximately 40% and 25% of the total compact volume, respectively. The TRISO coatings were deposited using a 150 mm diameter fluidized-bed chemical vapor deposition (CVD) furnace on spherical kernels that were nominally 425 μm in diameter. The kernels were from kernel composite Lot J52R-16-69317, which contained low-enriched uranium (15.5% 235 U) in a mixture of uranium carbide and uranium oxide (UCO). Kernels were coated with four concentric CVD layers: a porous carbon buffer layer that was nominally 100 μm thick, an inner pyrolytic carbon (IPyC) layer that was nominally 40 μm thick, a silicon carbide (SiC) layer that was nominally 35 μm thick, and an outer pyrolytic carbon (OPyC) layer that was nominally 40-μm-thick. Coated particle composite J52R-16-98005 was overcoated (OC) with a graphite/resin blend, and these OC TRISO particles were pressed to form cylindrical compacts that were nominally a half inch in diameter and one inch long.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Moving Bed Chemical Looping Combustion Fuel Reactor Modeling and Sensitivity Analysis

Chemical looping combustion (CLC) is a novel, coal-based power generation technology that has currently achieved only small-scale, non-integrated development status, with the fuel reactor being the key developmental component in the CLC process. Both circulating fluidized bed (CFB) and moving bed fuel reactors have been the subjects of ongoing development campaigns. The objective of the effort described in this report is to characterize a moving bed fuel reactor by applying more detailed, reaction kinetics-based models that represent the nature of this reactor with a more fundamental foundation than has previously been reported by developers. This report describes the modeling basis, and a “base” fuel reactor’s design and performance characteristics resulting from the model. A major focus of the evaluation has been placed on studies of the sensitivity of the base moving bed fuel reactor performance, design, and CLC power plant cost implications to the key parameters.

20 FOSSIL-FUELED POWER PLANTS↗

Data Compilation for AGR-2 Baseline Coated Particle Batch G73J-14-93071A

Coated particle fuel batch G73J-14-93071A was produced by the Babcock and Wilcox Company (B&W) for possible selection as UCO baseline fuel for the Advanced Gas Reactor Fuel Development and Qualification Program’s AGR-2 irradiation test. Batch G73J-14-93071A is a single batch of TRISO-coated 425 µm nominal diameter 14% low enrichment uranium oxide/uranium carbide kernels (LEUCO). The TRISO-coatings consist of a ~50% dense carbon buffer layer (100 µm nominal thickness) followed by a dense inner pyrocarbon layer (40 µm nominal thickness) followed by a SiC layer (35 µm nominal thickness) followed by another dense outer pyrocarbon layer (40 µm nominal thickness). The AGR-2 Fuel Specification (INL SPC-923) provides the requirements necessary for acceptance of the fuel manufactured for the AGR-2 irradiation test. The bulk of the kernels and coated particle acceptance testing was performed at B&W and is not contained in this report. Sample NP-B7927 was sent to ORNL for supplemental characterization. The procedures for the limited characterization and qualification of the particles performed at ORNL are outlined in ORNL product inspection plan AGR-CHAR-PIP-09. The BAFo equivalent optical anisotropies of the inner and outer pyrocarbon layers are reported on Inspection Report Form IRF-09, with a determination as to whether the particle batch satisfied the specified parameters for this property. The batch was found to satisfy the AGR-2 Fuel Specification SPC-923, Rev. 1 for IPyC and OPyC anisotropy. Also provided in this data package are data on the true BAFo, average particle weight, OPyC open porosity, and SiC soot inclusion defect fraction. True BAFo is calculated as (1+N)/(1-N), where N is the diattenuation. This differs from equivalent BAFo = 1+3N, which is the calculation used by the fuel specification to allow comparison to historical measurements. Average OPyC open porosity was determined using a single sample to be 0.65 ml/m². An unusually high SiC soot defect fraction was observed in this sample, apparently due to a fabrication anomaly which resulted in one of the hot sampling cups disturbing the bed fluidization during SiC deposition. This is discussed further in the pages following Data Report Form DRF-32.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

PIE on Five Irradiated AGR-1 Compacts

Post-irradiation examination (PIE) is in progress on coated particle fuel compacts from the first Advanced Gas Reactor irradiation experiment (AGR-1). PIE has been completed on five compacts at the Oak Ridge National Laboratory (ORNL). Three compacts (Compacts 6-1-1, 4-4-2, and 5-2-3) were examined in the as-irradiated condition and two compacts (Compacts 6-4-3 and 3-3-2) were subjected to safety testing at 1600°C, followed by post-safety testing examination similar to the PIE performed on the as-irradiated compacts. All compacts were subjected to a standard set of analyses that included the following: (1) detection of exposed fission products by Deconsolidation-Leach-Burn-Leach (DLBL), (2) measurement of gamma-emitting fission product inventory using the Irradiated Microsphere Gamma Analyzer (IMGA), and (3) microstructural examination by x-ray tomography and materialography. The equipment and methods used are reported in detail in ORNL/TM-2012/233, AGR-1 Irradiated Compact 6-1-1 PIE Report, and have been summarized in the next section of this report. This report also provides a brief summary of the results of the completed PIE. Preliminary trends are discussed in this report, but final conclusions will require the support of additional data and further analysis. A separate report is being generated for each AGR-1 compact after PIE is complete that describes in detail the examinations performed and fully documents the data obtained. A final AGR-1 PIE summary report will compile all available data and provide a more comprehensive analysis of the AGR-1 fuel performance. In general, it was observed that the tristructural isotropic (TRISO) coated particles remained intact during irradiation and subsequent safety testing to 1600°C. No significant gaseous 85 Kr release was detected during the irradiation or high temperature safety testing, which would be indicative of simultaneous failure of all three outer layers of the TRISO coating. Only three particles with defective SiC layers were detected in the five compacts included in this summary. These particles were detected because they released a significant fraction of their cesium inventory, which was generally well retained. Two particles from Compact 5-2-3 released cesium during irradiation and one particle from Compact 3-3-2 released cesium during safety testing. However, it is evident that some fission products were released through intact SiC during irradiation. Most of these fission products were trapped in the compact matrix, where they could be analyzed by PIE. In terms of fractional release, the main fission products detected outside intact SiC were silver, palladium, and europium. The main impact of irradiation on the microstructure of the TRISO-coating layers was densification and shrinkage of the buffer layer, which often led to buffer fracture and subsequent enhanced swelling of the kernel. Some inner pyrocarbon (IPyC) layers were cracked by the radiation-induced changes in the buffer layer, and on rare occasion these cracks propagated into the SiC. In the two particles that released cesium during irradiation, these SiC cracks penetrated through the entire layer. The particle from Compact 3-3-2 that released cesium was not directly related to irradiation damage. Its SiC layer was determined to be porous as a result of a fabrication defect that occurs when a particle is over-fluidized in the coater, causing it to pick up carbon soot on the surface of the IPyC prior to SiC deposition. This porous SiC layer remained sufficiently intact during irradiation to retain cesium, but finally cracked during high temperature testing. Analysis of fission products remaining in the coated particles showed that the retention of silver varied dramatically from particle-to-particle within each compact. Examination with the IMGA determined that some particles contained a level of 110m Ag equivalent to that calculated to have been generated over the three-year irradiation period, while other particles contained too little to be detected by the gamma analysis. The mechanism for silver release is still being investigated. Attempts to correlate the varied release behavior to obvious radiation-induced changes in the coating layers have not been successful. Scanning electron microscopy (SEM) has provided some evidence that particles with higher silver release also show greater penetration of palladium silicide into the SiC layer, and this should be studied further.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Data Compilation for AGR-2 B&W UO2 Coated Particle Batch G73H-10-93085B

Coated particle fuel batch G73H-10-93085B was produced by the Babcock and Wilcox Company (B&W) for use as UO₂ fuel for the Advanced Gas Reactor Fuel Development and Qualification Program’s AGR-2 irradiation test. Batch G73H-10-93085B is a single batch of TRISO-coated 500 μm nominal diameter 10% low enrichment uranium oxide kernels (LEU). The TRISO-coatings consist of a ~50% dense carbon buffer layer (100 μm nominal thickness) followed by a dense inner pyrocarbon layer (40 μm nominal thickness) followed by a SiC layer (35 μm nominal thickness) followed by another dense outer pyrocarbon layer (40 μm nominal thickness). Argon was added to the hydrogen fluidization gas during SiC deposition. The AGR-2 Fuel Specification (INL SPC-923) provides the requirements necessary for acceptance of the fuel manufactured for the AGR-2 irradiation test. The bulk of the kernels and coated particle acceptance testing was performed at B&W and is not contained in this report. B&W samples NP-B8488, NP-B8489, and NP-B8490 (all from batch G73H-10-93085B) were sent to ORNL for characterization and compacting. These samples were composited and renamed LEU10. Samples were then riffled for supplemental characterization. The procedures for the limited characterization and qualification of the particles performed at ORNL are outlined in ORNL product inspection plan AGR-CHAR-PIP-09. The BAFo equivalent optical anisotropies of the inner and outer pyrocarbon layers are reported on Inspection Report Form IRF-09, with a determination as to whether the particle batch satisfied the specified parameters for this property. The batch was found to satisfy the AGR-2 Fuel Specification SPC-923, Rev. 1 for IPyC and OPyC anisotropy. Also provided in this data package are data on the true BAFo, average particle weight, and SiC soot inclusion defect fraction. True BAFo is calculated as (1+N)/(1-N), where N is the diattenuation. This differs from equivalent BAFo = 1+3N, which is the calculation used by the fuel specification to allow comparison to historical measurements. Three SiC inclusions were found in a sample of 3510 particles. This corresponds to a defect fraction of <2.3E-3 at 95% confidence. One of these inclusions was of unusual appearance and was determined to contain molybdenum using energy dispersive x-ray analysis.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗