Search NASA⌕ Search

SEARCH · Search NASA

Results for “FOSSILS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Engineering Accessible Adsorption Sites in MOFs for CO 2 Capture

The overall goal of this project was to synthesize metal-organic frameworks (MOFs) with improved CO 2 adsorption and selectivity properties for potential application in removing this greenhouse gas from flue gas streams during fossil fuel processing. MOFs are an important class of 2-dimensional (2D) and 3D supramolecular coordination polymer networks that are comprised of organic linkers (ligands) and metal ion-units or clusters. They generally possess very high surface area, porosity, variable thermal stability and tunable chemistry, which make them potential candidates for CO 2 adsorption. The three specific objectives of this project were as follows: 1) To synthesize MOFs with metal ion adsorption sites in more accessible locations within the structures (towards the center of the organic linkers) in order to enhance their CO 2 adsorption characteristics; 2) To investigate the CO 2 adsorption properties of new MOFs containing pyrazine- and other nitrogen containing ligands as possible improved alternatives to known amine-functionalized MOFs; and 3) To investigate the nature of the adsorption sites and mechanism(s) by conducting computational studies on CO 2 adsorption within the MOF structures and compare the results with experimental observations. The main outcomes of this research are as follows: Nitrogen-containing ligands that possess a diaza-12-crown-4-ether moiety at the center of two phenylcarboxylic acid groups were utilized to synthesize 3D MOFs in which the added transition metal ions (i.e. Co 2+ and Mn 2+ ) were coordinated within the crown moieties. Therefore, the structures had the metal ions in more accessible locations. The new 3D structures, being non-porous however, showed negligible adsorption capacity for CO 2 . The ligand 2,3,5,6,-pyrazinetetracarboxylic acid (PZTC) was successfully used to synthesize four new MOFs, each with one of the following metal ions; Ca 2+ (1D), Zn 2+ (2D), Mn 2+ (3D) and Gd 3+ (3D), and with the dimensionality (D) indicated. The Ca-, Zn- and Mn- PZTC-based MOFs had no obvious accessible pores and showed no adsorption capacity for CO 2 . Gd-PZTC structure however, showed promising capacities of 1.0 mmol/g and 0.6 mmol/g at 273K and 298 K respectively. Another nitrogen-containing ligand explored was 2,2’-dinitro- trans-4,4’- stilbenedicarboxylic acid (DNSDC) and in combination with a co-ligand, 2,2’-bipyridine (2,2’-BPY). The combination of DNSDC with Co 2+ and Mn 2+ yielded four new thermally stable MOFs that showed significant CO 2 absorption capacities. The experimental CO 2 adsorption capacities varied among the structures, ranging between 1.8 mmol/g at 256 K and 0.8 mmol/g at 298K. The DNSDC-based structures maintained significant stability and capacities over many adsorption cycles at 298K. With 2,2’-diamino- trans-4,4’-stillbene dicarboxylic acid (DASDC) as ligand instead of DNSDC, new 3D MOF structures were also synthesized. The structures, however, were less stable, and decomposed on activation (exposure to vacuum and or solvents) and therefore showed negligible CO 2 adsorption capacities. The dinitro-stilbene based MOFs showed promising CO 2 adsorption capacities, thermal stabilities and recyclability, and therefore showed potential for application in CO 2 removal from flue gas. The research accomplishments presented herein support the Department of Energy’s (DOE) Office of Fossil Energy and the National Energy Technology Laboratory (NETL) mission in the area of research that advances the science of coal technologies, specifically carbon capture and storage. The research outcomes can guide rational design/synthesis strategies towards producing advanced materials for CO 2 capture. However, further research is needed in order to develop the materials to meet or exceed capacities and stabilities that are reported for their counterparts.

20 FOSSIL-FUELED POWER PLANTS↗

Effect of changes of physical properties on CO2 capture solvents on its absorption rate

Concern over greenhouse gas emissions, such as CO2 from fossil fuel combustion, is leading to new regulations on fossil-fuel fired power generation facilities. Using amine-based solutions for CO2 capture in power plants is the most common method utilized industrially and studied in the laboratory environment. However, a limited number of amines are available for carbon capture research after balancing the capital cost and energy penalty. In the carbon capture process, physical properties such as viscosity, surface tension, wettability, etc. are found to play important roles in solvent performance. In this context, we are exploring an approach to enhance the CO2 capture of amine solvents by tuning the physical properties of the amine solvents by the addition of additives. These additives in the amine solution utilize controlled bubble generation to increase liquid-gas contact surface area. This method can increase mass transfer in the absorber column, specifically at the bottom where the mass transfer is limited. These additives can enhance the CO2 capture efficiency by changing the physical property of the solvent which in turn can lower the capital cost associated with the system. This work can be applied to all common aqueous amine solvent and would be of great interest to those in the CCS community.

20 FOSSIL-FUELED POWER PLANTS↗

An Overview of Policies Influencing Air Pollution from the Electricity Sector in South Asia

The electricity sector is a substantial source of air pollution and associated health problems in South Asia and elsewhere. Fossil-fueled power plants emit a wide variety of harmful pollutants. Those with the greatest health impacts are particulate matter and ozone. Once released into the atmosphere, there is no practical way to remove air pollutants, which means that policies designed to improve air quality have to limit the pollutants before release. However, tackling such pollution is challenging because developing economies also need to provide electricity as a basic necessity for their citizens and as an engine of economic growth. This report provides examples of policies impacting air pollution from the fossil-fuel electricity sector in the South Asian countries of Afghanistan, Bangladesh, Bhutan, India, the Maldives, Nepal, Pakistan, and Sri Lanka. Some of this information was difficult to locate, so this is not a comprehensive study, but rather an overview or "scan" of the sector that includes examples of (1) policies that directly regulate air quality by limiting emissions from specific point sources (by restricting operating hours, for instance), and (2) indirect policies that incentivize or disincentivize polluting activities, such as policies to encourage fuel switching, for example. The report shows (1) the great variation among the policy instruments used in each country, (2) that many countries, especially those that have a mismatch between seasonal demand and resource availability, could improve energy security and reduce air pollution through increased cross-border electricity trade, and (3) some countries have contradictory policies (promoting both coal and renewables, for instance).

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Energy Storage and Power Plant Decommissioning

The report examines three fossil-fuel power plant decommissioning strategies to assess the role of energy storage in enabling an equitable clean energy transition future. The analysis showed how storage could enable reduction of fossil-fuel sources from the grid while enabling increased renewable energy integration into the electric grid. The report offers recommendations for future work, including the need to further develop the non-energy benefit attributes of energy storage systems with a focus on the benefits accrued to local communities to understand past decisions and inform future decision-making tools that account for environmental, economic, and social impacts, particularly those on disadvantaged communities.

20 FOSSIL-FUELED POWER PLANTS↗

Phase I: Natural Gas-Based Energy Storage at Abbott Power Plant

Compressed Natural Gas Energy Storage (CNGES), uses the potential energy of compressed natural gas within an integrated energy storage system. Specifically, an inventory of high-pressure natural gas is stored during off-peak hours in a first stage by controlling the balance of gas entering a pipeline from the transmission system, and in a second stage by using new compressors to fill vessels onsite. The natural gas storage medium is then discharged through an expander-generator to use the potential energy from the gas to generate electricity without combustion. The excess chemical energy stored in the natural gas is integrated with an existing fossil-based asset to provide power generation during peak hours and increase the reliability of the associated fossil generating facility.

03 NATURAL GAS↗

Cost and Performance Projections for Coal- and Natural Gas-Fired Power Plants

This report provides quantitative estimates of future cost and performance improvements for fossil-fueled power plants equipped with carbon capture developed through the adaption/modification of relevant Aspen Plus ® case study models from published NETL techno-economic analyses. The cost and performance estimates in this report are meant to represent prospective improvements that may be realized for low-carbon-emitting PC and NGCC power plants through robust commercial deployment (e.g., learning by doing) of high TRL technologies as well as additional investments in targeted RD&D activities. The methodology used to develop the estimates in this report is intended to allow direct comparison of the technology improvements with the SOA baseline published in NETL’s Fossil Energy Baseline (Rev 4a) Report.

20 FOSSIL-FUELED POWER PLANTS↗

Concrete Thermal Energy Storage Enabling Flexible Operation without Coal Plant Cycling

The work described in this report is responsive to the Office of Fossil Energy program “Energy Storage for Fossil Power Generation.” The pilot plant built as a result of this project demonstrated the feasibility and performance of a concrete thermal energy storage (CTES) system integrated with a supercritical coal power plant. The 10 MWh electrical (>25 MWh thermal) CTES unit, developed by Storworks Power, was designed to enable flexible operation of coal plants without cycling damage. The project's key technical achievements showcase a significant advancement in energy storage technology. A modular CTES system using 42 “Bolderblocs” units was successfully designed and constructed at Alabama Power’s Plant Gaston Unit 5, with each block containing embedded stainless-steel coils in specialized, cost-effective high-temperature concrete. The system interfaced seamlessly with the plant's 3500 psig (241 barg), 1000°F (538°C) supercritical steam, demonstrating operational flexibility. Over 86 full cycles, the CTES exhibited rapid charging and discharging capabilities, effectively mimicking steam turbine feed conditions and handling varying load profiles and storage durations. Performance validation confirmed the system's ability to consistently meet design target steam conditions of 75 bar-a and ~400°C for nominal baseline discharge. The concrete material withstood repeated thermal cycling without degradation, validating earlier lab-scale tests. Integration of balance of plant components, including a condensate management system with storage tank and air-cooled condenser, minimized plant interfaces and water consumption. A robust control scheme ensured safe, automated operation across various scenarios. Key learnings from the project were invaluable: 1. Initial concrete drying and commissioning procedures were refined for future deployments, enhancing efficiency in subsequent installations. 2. System flexibility exceeded expectations, with rapid response to changing conditions. 3. Design improvements were identified including optimized insulation and piping that will enhance overall system efficiency in future deployments 4. Full cycle thermal roundtrip efficiencies exceeded 88%. While the roundtrip electrical efficiency was somewhat limited by known challenges using input steam, such constraints may be mitigated by swapping steam for hot air as thermal input. 5. A summary of key performance parameters for the pilot test and predicted performance of a full scale commercial system with specified improvements determined from the pilot are shown in Section 8. The project faced challenges, including COVID-19 delays and host plant availability constraints. However, these were overcome through adaptive planning and execution. The successful management of these obstacles demonstrated the resilience and adaptability of the project team and the robustness of the CTES technology. This successful pilot demonstrates the potential for CTES to enhance coal plant flexibility, supporting grid stability as renewable penetration increases. The validated design and operational data provide a solid foundation for scaling up to utility-scale implementations, potentially transforming how thermal plants operate in evolving energy landscapes. The system's ability to rapidly respond to changing grid conditions while maintaining high efficiency makes it a promising solution for balancing intermittent renewable energy sources. Furthermore, the project highlighted the potential for even greater efficiencies in future iterations. The use of air as an input medium could potentially eliminate the limitations observed with steam input, opening new possibilities for energy storage applications beyond coal plant integration. In conclusion, this pilot project not only achieved its primary goals but also uncovered additional benefits and potential applications of the CTES technology. It represents a significant step forward in addressing the challenges of grid stability and flexibility in an increasingly renewable-driven energy landscape.

01 COAL, LIGNITE, AND PEAT↗

Examination of Factors Affecting the Cost and Performance of a Natural Gas Combined Cycle Equipped with Carbon Dioxide Capture

The purpose of this Technical Note is to report the findings of an examination of the effect of plausible deviations in select study assumptions on the reported cost and performance estimates for a power plant case drawn from NETL’s “Cost and Performance Baseline for Fossil Energy Plants Volume 1: Bituminous Coal and Natural Gas to Electricity” (known as the Fossil Energy Baseline). An F-Class NGCC power plant equipped with state-of-the-art, solvent-based, post-combustion carbon dioxide (CO2) capture (95 percent carbon capture rate)—designated as Case B31B.95—was selected for this work. This sensitivity analysis provides insight into the effects of parameter variations within and across selected categories—ambient conditions, construction cost, natural gas (NG) price, capacity factor, and finance—on the plant performance and capital and operating and maintenance (O&M) costs, and the subsequent impact on common figures of merit.

20 FOSSIL-FUELED POWER PLANTS↗

Energy-based break-even transportation distance of biomass feedstocks

The distance a solid biomass feedstock could be used to transport the feedstock when used as biobased fuel is critical information for transportation analysis. However, this information is not available. The break-even transportation distance (BTD) of various fuels from biomass feedstocks and fossil sources was analyzed for truck, rail, and ship transport modes based on bulk density, moisture content, and specific energy. Fourteen different biomass feedstocks, such as crop residues (e.g., corn stover), woody biomass (e.g., wood chips), including thermally pretreated (torrefied) and densified forms (pellets), cattle feedlot compost, and three standard fossil fuels, namely, coal, lignite, and diesel, were considered for BTD analysis and comparison. The BTD values were derived by comparing the energy content of biomass feedstocks with the energy expended in transporting the fuels through selected transportation modes. For ready reference, an alternative derivation of BTD equations and example calculations were also presented. Among the biomass feedstocks, torrefied pellets had the highest BTD (4.16 × 10 4 , 12.47 × 10 4 , and 54.14 × 10 4 km), and cattle feedlot compost had the lowest BTD (1.29 × 10 4 , 3.88 × 10 4 , and 9.23 × 10 4 km), respectively, for truck, rail, and ship. Higher bulk density and higher specific energy of the biomass feedstocks increased the BTD for all modes of transport. Transport is most efficient when mass-limited. Biomass feedstock bulk densities where transportation becomes mass-limited are 223, 1,480, and 656 kg/m 3 for truck, rail, and ship, respectively. Truck transport is typically mass-limited (payload limit restriction; increased BTD), whereas rail transport is entirely volume-limited (cargo space restriction; decreased BTD), and ship transport is mostly volume-limited for biomass feedstocks and mass-limited for densified biomass feedstocks. Ship transport is the most efficient, followed by rail and truck; on average for the materials (17) studied, rail is 3.1 times and ship is 9.2 times the truck's BTD. Based on the bulk density and higher specific energy of the biomass feedstocks, regardless of the refinery location, interstate truck transport of these feedstocks is not a limiting factor in the bio-refining process., with the studied biomass feedstock BTD per truckload representing between 0.89 and 2.88 times the US perimeter.

09 BIOMASS FUELS↗

EVOLUTION OF GALAXY GROUPS IN THE ILLUSTRIS SIMULATION

We present the first study of the evolution of galaxy groups in the Illustris simulation. We focus on dynamically relaxed and unrelaxed galaxy groups representing dynamically evolved and evolving galaxy systems, respectively. The evolutionary state of a group is probed from its luminosity gap and separation between the brightest group galaxy and the center of mass of the group members. We find that the Illustris simulation overproduces galaxy systems with a large luminosity gap, known as fossil systems, in comparison to observations and the probed semi-analytical predictions. However, this simulation is just as successful as the probed semi-analytic model in recovering the correlation between luminosity gap and offset of the luminosity centroid. We find evolutionary tracks based on luminosity gap that indicate that a group with a large luminosity gap is rooted in one with a small luminosity gap, regardless of the position of the brightest group galaxy within the halo. This simulation helps to explore, for the first time, the black hole mass and its accretion rate in galaxy groups. For a given stellar mass of the brightest group galaxies, the black hole mass is larger in dynamically relaxed groups with a lower rate of mass accretion. We find this to be consistent with the latest observational studies of radio activity in the brightest group galaxies in fossil groups. We also find that the intragalactic medium in dynamically evolved groups is hotter for a given halo mass than that in evolving groups, again consistent with earlier observational studies.

79 ASTRONOMY AND ASTROPHYSICS↗

Soot microphysical effects on liquid clouds, a multi-model investigation

We use global models to explore the microphysical effects of carbonaceous aerosols on liquid clouds. Although absorption of solar radiation by soot warms the atmosphere, soot may cause climate cooling due to its contribution to cloud condensation nuclei (CCN) and therefore cloud brightness. Six global models conducted three soot experiments; four of the models had detailed aerosol microphysical schemes. The average cloud radiative response to biofuel soot (black and organic carbon), including both indirect and semi-direct effects, is -0.11Wm -2 , comparable in size but opposite in sign to the respective direct effect. In a more idealized fossil fuel black carbon experiment, some models calculated a positive cloud response because soot provides a deposition sink for sulfuric and nitric acids and secondary organics, decreasing nucleation and evolution of viable CCN. Biofuel soot particles were also typically assumed to be larger and more hygroscopic than for fossil fuel soot and therefore caused more negative forcing, as also found in previous studies. Diesel soot (black and organic carbon) experiments had relatively smaller cloud impacts with five Correspondence to: D. Koch (dorothy.koch@science.doe.gov) of the models <±0.06Wm -2 from clouds. The results are subject to the caveats that variability among models, and regional and interrannual variability for each model, are large. This comparison together with previously published results stresses the need to further constrain aerosol microphysical schemes. The non-linearities resulting from the competition of opposing effects on the CCN population make it difficult to extrapolate from idealized experimen

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Microfossils from the Neoarchean Campbell Group, Griqualand West Sequence of the Transvaal Supergroup, and their paleoenvironmental and evolutionary implications

The oldest filament- and colonial coccoid-containing microbial fossil assemblage now known is described here from drill core samples of stromatolitic cherty limestones of the Neoarchean, approximately 2600-Ma-old Campbell Group (Ghaap Plateau Dolomite, Lime Acres Member) obtained at Lime Acres, northern Cape Province, South Africa. The assemblage is biologically diverse, including entophysalidacean (Eoentophysalis sp.), probable chroococcacean (unnamed colonial coccoids), and oscillatoriacean cyanobacteria (Eomycetopsis cf. filiformis, and Siphonophycus transvaalensis), as well as filamentous fossil bacteria (Archaeotrichion sp.); filamentous possible microfossils (unnamed hematitic filaments) also occur. The Campbell Group microorganisms contributed to the formation of stratiform and domical to columnar stromatolitic reefs in shallow subtidal to intertidal environments of the Transvaal intracratonic sea. Although only moderately to poorly preserved, they provide new evidence regarding the paleoenvironmental setting of the Campbell Group sediments, extend the known time-range of entophysalidacean cyanobacteria by more than 400 million years, substantiate the antiquity and role in stromatolite formation of Archean oscillatoriacean cyanobacteria, and document the exceedingly slow (hypobradytelic) evolutionary rate characteristic of this early evolving prokaryotic lineage.

Non-NASA Center↗

Lithofacies and biofacies of mid-Paleozoic thermal spring deposits in the Drummond Basin, Queensland, Australia

The Devonian to Carboniferous sinters of the Drummond Basin, Australia, are among the oldest well established examples of fossil subaerial hot springs. Numerous subaerial and subaqueous spring deposits are known from the geological record as a result of the occurrence of economic mineral deposits in many of them. Some are reported to contain fossils, but very few have been studied by paleobiologists; they represent an untapped source of paleobiological information on the history of hydrothermal ecosystems. Such systems are of special interest, given the molecular biological evidence that thermophilic bacteria lie near the root of the tree of extant life. The Drummond Basin sinters are very closely comparable with modern examples in Yellowstone National Park and elsewhere. Thirteen microfacies are recognisable in the field, ranging from high temperature apparently abiotic geyserite through various forms of stromatolitic sinter probably of cyanobacterial origin to ambient temperature marsh deposits. Microfossils in the stromatolites are interpreted as cyanobacterial sheaths. Herbaceous lycopsids occur in the lower temperature deposits.

NASA Center ARC↗

Integrated chronostratigraphy of Proterozoic-Cambrian boundary beds in the western Anabar region, northern Siberia

Carbonate-rich sedimentary rocks of the western Anabar region, northern Siberia, preserve an exceptional record of evolutionary and biogeochemical events near the Proterozoic/Cambrian boundary. Sedimentologically, the boundary succession can be divided into three sequences representing successive episodes of late transgressive to early highstand deposition; four parasequences are recognized in the sequence corresponding lithostratigraphically to the Manykal Formation. Small shelly fossils are abundant and include many taxa that also occur in standard sections of southeastern Siberia. Despite this coincidence of faunal elements, biostratigraphic correlations between the two regions have been controversial because numerous species that first appear at or immediately above the basal Tommotian boundary in southeastern sections have first appearances scattered through more than thirty metres of section in the western Anabar. Carbon- and Sr-isotopic data on petrographically and geochemically screened samples collected at one- to two-metre intervals in a section along the Kotuikan River, favour correlation of the Staraya Reckha Formation and most of the overlying Manykai Formation with sub-Tommotian carbonates in southeastern Siberia. In contrast, isotopic data suggest that the uppermost Manykai Formation and the basal 26 m of the unconformably overlying Medvezhya Formation may have no equivalent in the southeast; they appear to provide a sedimentary and palaeontological record of an evolutionarily significant time interval represented in southeastern Siberia only by the sub-Tommotian unconformity. Correlations with radiometrically dated horizons in the Olenek and Kharaulakh regions of northern Siberia suggest that this interval lasted approximately three to six million years, during which essentially all 'basal Tommotian' small shelly fossils evolved.

Non-NASA Center↗

Microfossils and possible microfossils from the Early Archean Onverwacht Group, Barberton Mountain Land, South Africa

There is widespread textural evidence for microbial activity in the cherts of the Early Archean Onverwacht Group. Layers with fine carbonaceous laminations resembling fossil microbial mats are abundant in the cherty metasediments of the predominantly basaltic Hooggenoeg and Kromberg Formations. In rare cases, filamentous microfossils are associated with the laminae. The morphologies of the fossils, as well as the texture of the encompassing laminae suggest an affinity to modern mat-dwelling cyanobacteria or bacteria. A variety of spheroidal and ellipsoidal structures present in cherts of the Hooggenoeg and Kromberg Formations resemble modern coccoidal bacteria and bacterial structures, including spores. The development of spores may have enabled early microorganisms to survive the relatively harsh surficial conditions, including the effects of very large meteorite impacts on the young Earth.

Non-NASA Center↗

The historic biogeography of India: isolation or contact?

Geophysical maps depicting continental movement have consistently shown India, as it moved northward, to be located far out in the Tethys Sea. India split off from the African east coast about 148 m.y.a. From that time onward, according to almost all geophysical accounts, India was isolated from all of other continents until the early Miocene when it made contact with Eurasia. But the biological data, both fossil and Recent, indicate that this concept cannot be correct. If India had really existed as an isolated, oceanic continent for about 100 m.y., it should have developed a peculiar biota with many endemic genera and families in its terrestrial and shallow marine habitats. But there are virtually no remains of organisms indicating that India was isolated for any substantial time (millions of years). Instead, we find that almost all Indian taxa were possessed in common with other continents. As time went on, the northern relationships became stronger and the southern ones weaker. Most of the recent geophysical accounts show India not making contact with Eurasia until the early Miocene, but fossil materials show that this event must have taken place by the early Eocene. It has been postulated that, as India moved northward, it created a biogeographic barrier that separated marine fish populations and resulted in the east-west provinces that are now apparent in the Indian Ocean. At the same time, the barrier effect was supposed to have resulted in the formation of sister species that are now located far apart. Information currently available indicates that most living, tropical marine species are probably not over 3 m.y. old. Consequently, the northward movement of India, which took place primarily between 148 and 50 m.y.a., could have no bearing on the relationships of modern species.

NASA Discipline Exobiology↗

Distribution and diagenesis of microfossils from the lower Proterozoic Duck Creek Dolomite, Western Australia

Two distinct generations of microfossils occur in silicified carbonates from a previously undescribed locality of the Lower Proterozoic Duck Creek Dolomite, Western Australia. The earlier generation occurs in discrete organic-rich clasts and clots characterized by microquartz anhedra; it contains a variety of filamentous and coccoidal fossils in varying states of preservation. Second generation microfossils consist almost exclusively of well-preserved Gunflintia minuta filaments that drape clasts or appear to float in clear chalcedony. These filaments appear to represent an ecologically distinct assemblage that colonized a substrate containing the partially degraded remains of the first generation community. The two assemblages differ significantly in taxonomic frequency distribution from previously described Duck Creek florules. Taken together, Duck Creek microfossils exhibit a range of assemblage variability comparable to that found in other Lower Proterozoic iron formations and ferruginous carbonates. With increasing severity of post-mortem alteration, Duck Creek microfossils appear to converge morphologically on assemblages of simple microstructures described from early Archean cherts. Two new species are described: Oscillatoriopsis majuscula and O. cuboides; the former is among the largest septate filamentous fossils described from any Proterozoic formation.

NASA Discipline Number 52-30↗

Did Mars once have martians?

Pictures of Mars from the Viking and Mariner 9 missions provide evidence of liquid water in Mars' past, indicating a warmer climate. It is speculated that outflow channels and valley networks were formed 3.5 to 4 billions years ago, at the same time life was developing on Earth. Current theories suggest that chemical reactions in Mars' early atmosphere depleted the original amounts of carbon dioxide with no mechanism to recycle it back into the atmosphere. Ecosystems in the cold, dry Antarctic valleys provide models of Mars on Earth and indicate that if life evolved on Mars there may be organic or fossil evidence under the surface. Lake beds on Mars surface are considered to be the best place to hunt for fossils.

NASA Center ARC↗