Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fuel Reprocessing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

THE ATTRACTIVENESS OF MATERIAS ASSOCIATED WITH THORIUM-BASED NUCLEAR FUEL CYCLES FOR PHWRS

This paper reports the continued evaluation of the attractiveness of materials mixtures containing special nuclear materials (SNM) associated with thorium based nuclear fuel cycles. Specifically, this paper examines a thorium fuel cycle in which a pressurized heavy water reactor (PHWR) is fueled with mixtures of natural uranium/233U/thorium. This paper uses a PHWR fueled with natural uranium as a base fuel cycle, and then compares material attractiveness of fuel cycles that use 233U/thorium salted with natural uranium. The results include the material attractiveness of fuel at beginning of life (BoL), end of life (EoL), and the number of fuel assemblies required to collect a bare critical mass of plutonium or uranium. This study indicates what is required to render the uranium as having low utility for use in nuclear weapons; in addition, this study estimates the increased number of assemblies required to accumulate a bare critical mass of plutonium that has a higher utility for use in nuclear weapons. This approach identifies that some fuel cycles may be easier to implement the International Atomic Energy Agency (IAEA) safeguards approach and have a more effective safeguards by design outcome. For this study, approximately one year of fuel is required to be reprocessed to obtain one bare critical mass of plutonium. Nevertheless, the result of this paper suggests that all spent fuel needs to be rigorously safeguarded and provided with high levels of physical protection. This study was performed at the request of the United States Department of Energy /National Nuclear Security Administration (DOE/NNSA). The methodology and key findings will be presented.

CANDU↗

Development of self-interrogation neutron resonance densitometry (SINRD) to measure U-235 and Pu-239 content in a PWR spent fuel assembly

The use of Self-Interrogation Neutron Resonance Densitometry (SINRD) to measure the {sup 235}U and {sup 239}Pu content in a PWR spent fuel assembly was investigated via Monte Carlo N-Particle eXtended transport code (MCNPX) simulations. The sensitivity of SINRD is based on using the same fissile materials in the fission chambers as are present in the fuel because the effect of resonance absorption lines in the transmitted flux is amplified by the corresponding (n, f) reaction peaks in fission chamber. These simulations utilize the {sup 244}Cm spontaneous fission neutrons to self-interrogate the fuel pins. The amount of resonance absorption of these neutrons in the fuel can be measured using {sup 235}U and {sup 239}Pu fission chambers placed adjacent to the assembly. We used ratios of different fission chambers to reduce the sensitivity of the measurements to extraneous material present in fuel. The development of SINRD to measure the fissile content in spent fuel is of great importance to the improvement of nuclear safeguards and material accountability. Future work includes the use of this technique to measure the fissile content in FBR spent fuel and heavy metal product from reprocessing methods.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Acid-base properties of the Fe(CN){sub 6}{sup 3-}/Fe(CN){sub 6}{sup 4-} redox couple in the presence of various background mineral acids and salts

The acid-base behavior of Fe(CN){sub 6}{sup 4-} was investigated by measuring the formal potentials of the Fe(CN){sub 6}{sup 3-}/Fe(CN){sub 6}{sup 4-} couple over a wide range of acidic and neutral solution compositions. The experimental data were fitted to a model taking into account the protonated forms of Fe(CN){sub 6}{sup 4-} and using values of the activities of species in solution, calculated with a simple solution model and a series of binary data available in the literature. The fitting needed to take account of the protonated species HFe(CN){sub 6}{sup 3-} and H{sub 2}Fe(CN){sub 6}{sup 2-}, already described in the literature, but also the species H{sub 3}Fe(CN){sub 6}{sup -} (associated with the acid-base equilibrium H{sub 3}Fe(CN){sub 6}{sup -} ↔ H{sub 2}Fe(CN){sub 6}{sup 2-} + H{sup +}). The acidic dissociation constants of HFe(CN){sub 6}{sup 3-}, H{sub 2}Fe(CN){sub 6}{sup 2-} and H{sub 3}Fe(CN){sub 6}{sup -} were found to be pK(1)(II) = 3.9 ± 0.1, pK(2)(II) = 2.0 ± 0.1, and pK(3)(II) = 0.0 ± 0.1, respectively. These constants were determined by taking into account that the activities of the species are independent of the ionic strength. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Corrosion Behavior of Fe-7Cr-1Mo-12Zr Metal Waste Form Alloy in Simulated Repository Environment

Metal waste forms (MWF) are solid metallic waste categorized as high-level radioactive waste generated during pyro-reprocessing of spent metallic fuels and geologically disposed off. This waste form generated requires an excellent corrosion resistance in a geological repository environment. In the present work, Fe-7Cr-1Mo-12Zr MWF alloy was developed by casting in an arc melting furnace. The x-ray diffraction analysis revealed the formation of stable phases of α-Fe solid solution and the intermetallic phases of Fe{sub 2}Zr and Fe{sub 23}Zr{sub 6}. The corrosion behavior of Fe-7Cr-1Mo-12Zr alloy was investigated using electrochemical techniques in aggressive (highly acidic with Cl{sup −}) and nominal repository pH environment. Cyclic potentiodynamic polarization studies indicated the shift in corrosion potential toward cathodic potential in highly acidic solution with Cl{sup −}. The corrosion mechanism of pitting is associated with acidified pH medium with more Cl{sup −}, whereas uniform corrosion or transpassive dissolution is resultant of mild acidity or mild alkaline medium. The passive region is wider in pH 5 and 8 when compared to pH 1 and 3. Electrochemical impedance spectroscopic (EIS) analysis revealed the lowering of passive film stability in the highly acidic medium in the presence of Cl{sup −}. The role of passive oxide layers on the corrosion resistance of the Fe-7Cr-1Mo-12Zr MWF alloy is discussed.

36 MATERIALS SCIENCE↗

Glass-bonded ceramic waste forms for immobilization of radioiodine from caustic scrubber wastes

Glass-bonded sodalite composite waste forms have been developed for the immobilization of liquid radioactive wastes resulting from off-gas treatment during aqueous reprocessing of used nuclear fuel, with a particular focus on 129I. The proposed composite waste form is comprised of aluminosilicate ceramic phases containing volatile radionuclides bonded with a glassy matrix. In this work, a suite of ten candidate low-temperature glass binders (ZnO-Bi2O3-based glasses and a Na2O-B2O3-SiO2 glass) were examined. Six glasses were mixed with caustic scrubber waste simulant previously converted into a sodalite-rich material (to provide glass fractions of 10 and 20 wt.%), uniaxially pressed into pellets, and sintered at 350 °C or 550 °C for 8 h in air. Iodine retention after heat treatment was assessed by neutron activation analysis, showing retention of 67-100 % of expected iodine. The aqueous durabilities of the resulting materials were then determined, following the ASTM C1308 standard test, showing iodine releases of 1 to 23 g m-2 after 4 d. The cumulative iodine release for the best performing system (a zinc-bismuth-borate glass binder) was <1 g m-2, and its iodine retention from processing was 67 %. The iodine releases compared favorably with other waste forms. In parallel, this best-performing composition was also consolidated via hot isostatic pressing (HIP) in a stainless-steel canister at 550 °C for 2 h under 100 MPa pressure. The HIPed sample was produced at the ~20 g scale and showed improved densification and minimal reaction with the canister.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Crystalline compounds for remediation of rare-earth fission products: A review

Rare-earth (RE) containing crystals have been investigated as media for the immobilization of RE fission products. During reprocessing of spent nuclear fuels, various fission products including REs, alkalis, and alkaline earths are found after the extraction of actinides. One viable option to immobilize the RE fission products is to incorporate them into chemically durable crystalline phases in specific waste forms. This study summarizes the crystal structures and synthesis methods of six RE-containing compounds that have applications in remediation of RE fission products. These compounds include oxyapatite [Ca2RE8(SiO4)6O2], oxychloride [REOCl], borosilicate [RE3BSi2O10], pyrochlore [RE2A2O7], monazite [REPO4], and perovskite [REAO3] where A denotes transitional metals. This review provides an overview of literature on the usage of these six compounds for immobilizing RE fission products and summarizes different synthesis methods for producing these compounds. Comparisons of structural parameters with different REs in each compound are also discussed.

rare-earth oxychloride, rare-earth oxyapatite, rar↗

Near-infrared spectra and molar absorption coefficients of trivalent lanthanides dissolved in molten LiCl–KCl eutectic

Determining the concentration of the dissolved lanthanide species in LiCl–KCl eutectic salt is important to the development of pyrochemical reprocessing of used nuclear fuel. In this process, lanthanide fission products are found dissolved in the electrorefiner electrolyte in their trivalent oxidation state. The presence of dissolved trivalent lanthanides increases the liquidus temperature of the electrolyte mixture and can lead to the formation of insoluble oxide or oxychloride phases and must therefore be continuously monitored and controlled during the operation. Absorbance spectroscopy is a promising method for continuous measurement of the concentration of lanthanides and other elements dissolved in the electrolyte. The absorption of light by elements is linearly proportional to the concentration of the element for relatively dilute solutions according to the Beer-Lambert law. Although measurement of the absorption of ultraviolet and visible range light by lanthanides in LiCl–KCl eutectic molten salt have been explored previously, near infrared (NIR) absorption spectroscopy has received far less attention. It may, however, provide a better analytical signal when insoluble phases are present due to less Raleigh scattering compared to shorter wavelength radiation. Additionally, it may allow for concentration determination for certain elements using NIR absorption features where UV and visible range features are overlapping with features from other species. In this study, we report the UV–Vis–NIR spectra of the trivalent lanthanide chlorides of neodymium, samarium, and dysprosium in LiCl–KCl eutectic. Molar absorption coefficients are reported for analytically useful absorption maxima, with a focus on the molar absorption coefficients for NIR absorption maxima which have not been reported previously. Additionally, we observe a NIR-range absorption band of Nd3+ which was previously predicted but never experimentally observed. Here, we compare the calculated crystal field levels to the newly observed absorbance band and find them to be in good agreement with previous predictions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Pulse radiolysis and transient absorption spectra of aqueous solutions of sodium sulfamate

Chemical kinetics for the reactions of sulfamate ions (NH 2 SO 3 − ) with the primary products of water and nitric acid radiolysis were measured in aqueous solutions at ambient temperature. Using time-resolved electron pulse radiolysis techniques with a custom multichannel detection system, we examined the reactivity of NH 2 SO 3 − with the hydroxyl radical ( • OH), hydrogen atom (H • ), and nitrate radical (NO 3 • ). The sulfamate ion was found to react with • OH and H • with second-order rate coefficients of k • OH = (5.60 ± 0.04) × 10 6 M −1 s −1 and k H • = (7.96 ± 0.10) × 10 6 M −1 s −1 , respectively, and with NO 3 • with a rate coefficient of k NO 3 • = (1.67 ± 0.06) × 10 7 M −1 s −1 . The reactions of NH 2 SO 3 − with • OH and H • resulted in the formation of two transient radical species, one with maximum absorbance at 300 nm and a second with maxima at both 300 nm and 600 nm. These spectra are tentatively assigned to • NH 2 SO 3 and • NHSO 3 − , respectively. By measuring the absorbance of these radicals as a function of pH, the radical pK a was determined to be 9.5 ± 0.1. Overall, this work has implications for the longevity and performance of ferrous sulfamate, Fe(NH 2 SO 3 ) 2 , as a plutonium reductant in the reprocessing of used nuclear fuel.

Conrad, Jacy K. [Idaho National Laboratory (INL), ↗

Perovskite-Derived Cs 2 SnCl 6 –Silica Composites as Advanced Waste Forms for Chloride Salt Wastes

Advanced materials and processes are required to separate halides and fission products from complex salt waste streams associated with the chemical reprocessing of used nuclear fuels and molten salt reactor technologies for immobilization into chemically durable waste forms. Here, in this work, we explore an innovative concept using metal-halide perovskites as advanced host phases to incorporate Cs and Cl with very high waste loadings. Wet chemistry-synthesized Cs 2 SnCl 6 powders from CsCl salt solutions are successfully encapsulated into a silica matrix to form a composite using low-temperature spark plasma sintering with tunable Cs and Cl loadings up to 31 wt.% and 26 wt.%, respectively. Chemical durability testing of the composite waste forms by semi-dynamic leaching experiments demonstrates that incongruent leaching mechanism dominated. The metal-halide perovskite-silica composite waste forms display exceptional chemical durability with the long-term release rates of Cs and Cl comparable to or outperforming the state-of-the-art waste form materials but with significantly higher waste loadings. The scalable synthesis of the metal-halide perovskite from wet-chemistry processes opens up new opportunities in designing perovskite-glass composite waste forms for salt wastes with very high waste loadings and exceptional chemical durability for the sustainable development of advanced fuel cycles and next-generation reactor technologies.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Multiplicity of Th(IV) and U(VI) HEH[EHP] Chelates at Low Temperatures from Concentrated Nitric Acid Extractions

Organophosphorus extractants have been widely investigated for lanthanide recovery from ore and for application in the reprocessing of spent nuclear fuel, such as in Advanced TALSPEAK schemes. Determining the speciation of the extracted metal complex in the organic phase remains a significant challenge. A better understanding of the variability of HEH[EHP]–actinide complexes and the speciation of chelates for tetra- and hexavalent actinides can improve the predictability of actinide phase transfer in such biphasic systems. Here, the extraction of Th(IV) and U(VI) from nitric acid media using HEH[EHP] in heptane is examined. The distribution ratio as a function of nitric acid concentration was quantified using UV–vis spectroscopy, and then the speciation of HEH[EHP]–metal complexes in the organic phase was investigated using Fourier transform infrared (FTIR) spectroscopy and low-temperature 31 P nuclear magnetic resonance (NMR) spectroscopy. In addition to perturbation of the vibrational modes proximal to the phosphonic moiety in HEH[EHP] in the FTIR spectra, the appearance of a nitrate signal was found in the organic phase following extraction from the highest acidity conditions for U(VI). The 31 P NMR spectra of the organic phase at a low temperature (-70 °C) exhibited a surprising number (n) of resonances (n ≥ 7 for Th(IV) and n ≥ 11 for U(VI)), with the distribution between these resonances changing with the initial concentration of nitric acid in the aqueous phase. These results indicate that the compositions of the inner and outer spheres of the extracted actinides in the organic phase are more diverse than initially thought.

31P NMR↗

Structural Investigation of Technetium Dibutylphosphate Species Using X-ray Absorption Fine Structure Spectroscopy

The speciation of Tc after the extraction of Tc(IV) from H 2 O and 1 M HNO 3 by dibutylphosphoric acid (HDBP) in dodecane has been studied by X-ray absorption fine structure (XAFS) spectroscopy. Results show the formation of dimeric species with Tc 2 O 2 and Tc 2 O units, and the formulas [Tc 2 O 2 (DBP·HDBP) 4 ] (1) and [Tc 2 O(NO 3 ) 2 (DBP) 2 (DBP·HDBP) 2 ] (2) were, respectively, proposed for the species extracted from H 2 O and 1 M HNO 3 . The interatomic Tc–Tc distances found in the Tc 2 O 2 and Tc 2 O units [2.55(3) and 3.57(4) Å, respectively] are similar to the ones found in Tc(IV) dinuclear species. It is likely that the speciation of Tc(IV) in dodecane is due to the extraction of a species with a Tc 2 O unit for (2) and to the redissolution of a Tc(IV)-DBP solid for (1). The XAFS results for (1) and (2) were compared to that obtained for the extraction of Tc(IV) with TBP/HDBP/dodecane from 0.5 M HNO 3 , (3) which highlight the formation of Tc mononuclear nitrate species {i.e. [Tc(NO 3 ) 3 (DBP)] or [Tc(NO 3 ) 2 (DBP·HDBP)]}. These results confirm the importance of the preparation and speciation of the Tc(IV) aqueous solutions prior to extraction and how much this influences and drives the final Tc speciation in organic extraction. Here, these studies outline the complexity of Tc separation chemistry and provide insights into the behavior of Tc during the reprocessing of used nuclear fuel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of Nd(II) and Nd(III) Ions on the Speciation and Kinetic Dynamics of Radiolytic Transients in Molten LiCl-KCl Eutectic Salt Mixtures

In the pyrochemical reprocessing of used nuclear fuel, understanding the effects of ionizing radiation on the chemical behavior of fission products in molten chloride eutectic salt is crucial. Here, this study investigates the impact of radiation on the chemical and kinetic speciation of Nd ions in molten LiCl-KCl eutectic, which are challenging to separate due to their multivalent oxidation states and comproportionation reactions. Electron pulse radiolysis techniques were used to determine transient absorption spectra, chemical kinetics, and activation parameters for the reaction of Nd ions with the primary products of molten LiCl-KCl eutectic radiolysis: the solvated electron (e S - ) and dichlorine radical anion (Cl 2 •- ). Initially, Nd(III) reacted rapidly with e S - , forming Nd(II) with a second-order rate coefficient of k = (4.54 ± 0.07) × 10 10 M -1 s -1 at 673 K. The resulting Nd(II) ions then reacted slowly with Cl 2 •- , regenerating Nd(III) with an estimated rate of k = (1.72 ± 0.04) × 10 10 M -1 s -1 at 673 K. Additionally, the comproportionation reaction of Nd(III) and Nd(s) to form Nd(II) was monitored chemically and electrochemically. This work suggests that the comproportionation reaction of Nd(III) with Nd(s) to form Nd(II) is unstable in molten LiCl-KCl eutectic.

36 - MATERIALS SCIENCE↗

Molecular Hydrogen Yields from the Alpha Self-Radiolysis of Nitric Acid Solutions Containing Plutonium or Americium

The yield of molecular hydrogen, as a function of nitric acid concentration, from the a-radiolysis of aerated nitric acid and sulfuric acid mixtures containing plutonium or americium has been investigated. Comparison of experimental measurements with predictions of a Monte Carlo radiation track chemistry model shows that, in addition to scavenging of the hydrated electron, its precursor, and the hydrogen atom, the quenching of excited state water is important in controlling the yield of hydrogen. In addition, increases in solution acidity cause a significant change in the track reactions that can be explained as resulting from scavenging of e aq - by H aq + to form H • . While plutonium has been shown to be an effective scavenger of precursors of molecular hydrogen below 0.1 mol dm-3 nitrate, previously reported effects of plutonium on G(H 2 ) a between 1 and 10 mol dm -3 nitric acid were not reproduced. Modelling results suggest that plutonium is unlikely to effectively compete with nitrate ions in scavenging the precursors of molecular hydrogen at higher nitric acid concentrations and this was confirmed by comparing hydrogen yields from plutonium solutions with those from americium. Finally, comparison between the radionuclide, ion accelerator experiments and model predictions leads to the conclusion that the high dose rate of accelerator studies does not significantly affect the measured hydrogen yield. These reactions provide insight into the important processes for liquors common in the reprocessing of spent nuclear fuel and the storage of highly radioactive liquid waste prior to vitrification.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗