Search NASA⌕ Search

SEARCH · Search NASA

Results for “General Relativity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

GW151226: Observation of Gravitational Waves from a 22-Solar-Mass Binary Black Hole Coalescence

We report the observation of a gravitational-wave signal produced by the coalescence of two stellar-mass black holes. The signal, GW151226, was observed by the twin detectors of the Laser Interferometer Gravitational-Wave Observatory (LIGO) on December 26, 2015 at 03:38:53 UTC. The signal was initially identified within 70 s by an online matched-filter search targeting binary coalescences. Subsequent off-line analyses recovered GW151226 with a network signal-to-noise ratio of 13 and a significance greater than 5(sigma). The signal persisted in the LIGO frequency band for approximately 1 s, increasing in frequency and amplitude over about 55 cycles from 35 to 450 Hz, and reached a peak gravitational strain of 3.4(+0.7/-0.9) x 10(exp -22). The inferred source-frame initial black hole masses are 14.2(+8.3/-3.7 Stellar Mass and 7.5(+2.3/-2.3) Stellar Mass, and the final black hole mass is 20.8(+6.1/-1.7) Stellar Mass. We find that at least one of the component black holes has spin greater than 0.2. This source is located at a luminosity distance of 440(+180/-190) Mpc corresponding to a redshift of 0.090(+.030/-0.04). All uncertainties define a 90% credible interval. This second gravitational-wave observation provides improved constraints on stellar populations and on deviations from general relativity.

Abbott, B. P.↗

Binary Black Hole Mergers in the First Advanced LIGO Observing Run

The first observational run of the Advanced LIGO detectors, from September 12, 2015 to January 19, 2016, saw the first detections of gravitational waves from binary black hole mergers. In this paper we present full results from a search for binary black hole merger signals with total masses up to 100M solar mass and detailed implications from our observations of these systems. Our search, based on general-relativistic models of gravitational wave signals from binary black hole systems, unambiguously identified two signals, GW150914 and GW151226, with a significance of greater than 5 alpha over the observing period. It also identified a third possible signal, LVT151012, with substantially lower significance, which has a 87 probability of being of astrophysical origin. We provide detailed estimates of the parameters of the observed systems. Both GW150914 and GW151226 provide an unprecedented opportunity to study the two-body motion of a compact-object binary in the large velocity, highly nonlinear regime. We do not observe any deviations from general relativity, and place improved empirical bounds on several high-order post-Newtonian coefficients. From our observations we infer stellar-mass binary black hole merger rates lying in the range 9-240 Gpc-3 yr-1. These observations are beginning to inform astrophysical predictions of binary black hole formation rates, and indicate that future observing runs of the Advanced detector network will yield many more gravitational wave detections.

Abbott, B. P.↗

Systems and Methods for Ejection of Ions from an Ion Trap

The invention generally relates to systems and methods for ejection of ions from an ion trap. In certain embodiments, systems and methods of the invention sum two different frequency signals into a single summed signal that is applied to an ion trap. In other embodiments, an amplitude of a single frequency signal is modulated as the single frequency signal is being applied to the ion trap. In other embodiments, a first alternating current (AC) signal is applied to an ion trap that varies as a function of time, while a constant radio frequency (RF) signal is applied to the ion trap.

Cooks, Robert Graham↗

Presentation Summary: State of the AGN: Progress Toward Understanding Black Hole Accretion Processes

Accretion of plasma onto black holes power some of the most powerfulsystems in the cosmos. Supermassive black holes at the centers ofgalaxies represent the high-mass limit of these objects and so accountfor the most luminous accretors. As a result, their influence spansvast spatial and temporal scales of cosmic phenomena: intraclusterheating, intergalactic media, galactic feedback and star formation,kiloparsec-scale jets/outflows, variability over time scales of minutesto centuries, and luminous multi-wavelength electromagnetic emissionextending all the way down to its event horizon. Their intrigue isheightened by the fact that they lie at the intersection of variousphysical laws---e.g., general relativistic gravity,magnetohydrodynamics, radiation, high-energy particle physics,thermodynamics, and photo-ionization---which all must be reconciled toarrive at a fundamental understanding and probe for new physics, liketests of general relativity. These physics ingredients must beincorporated into simulations performed somehow on dynamical scalesranging from that of the event horizon to parsec-scales. Fortunately,new computational and theoretical techniques---such as GPU computing,radiation transport, and and novel gridding techniques---are enablingprogress to larger scales, more degrees of freedom, and even to binarysystems. Some of the topics we will survey include recent progress onsimulating the relationship between the disk-jet interaction, howtilted black holes behave, radiation-dominated flow, and how binaryAGN affect the standard picture of black hole accretion. Along theway, we will highlight how new technologies have enabled thesescientific rewards. Future directions and open questions will beprovided to inspire discussion and interaction during the session.

Black Holes↗

State of the AGN: Progress Toward Understanding Black Hole Accretion Processes

Accretion of plasma onto black holes power some of the most powerful systems in the cosmos. Supermassive black holes at the centers of galaxies represent the high-mass limit of these objects and so account for the most luminous accretors. As a result, their influence spans vast spatial and temporal scales of cosmic phenomena: intracluster heating, intergalactic media, galactic feedback and star formation, kiloparsec-scale jets/outflows, variability over time scales of minutes to centuries, and luminous multi-wavelength electromagnetic emission extending all the way down to its event horizon. Their intrigue is heightened by the fact that they lie at the intersection of various physical laws---e.g., general relativistic gravity, magnetohydrodynamics, radiation, high-energy particle physics, thermodynamics, and photo-ionization---which all must be reconciled to arrive at a fundamental understanding and probe for new physics, like tests of general relativity. These physics ingredients must be incorporated into simulations performed somehow on dynamical scales ranging from that of the event horizon to parsec-scales. Fortunately, new computational and theoretical techniques---such as GPU computing, radiation transport, and and novel gridding techniques---are enabling progress to larger scales, more degrees of freedom, and even to binary systems. Some of the topics we will survey include recent progress on simulating the relationship between the disk-jet interaction, how tilted black holes behave, radiation-dominated flow, and how binary AGN affect the standard picture of black hole accretion. Along the way, we will highlight how new technologies have enabled these scientific rewards. Future directions and open questions will be provided to inspire discussion and interaction during the session.

LISA↗

Frequency-dependent hydrodynamic inductance and the determination of the thermal and quantum noise of a superfluid gyroscope

We reexamine mass flow in a superfluid gyroscope containing a superfluid Josephson weak link. We introduce a frequency-dependent hydrodynamic inductance to account for an oscillatory flow of the normal fluid component in the sensing loop. With this hydrodynamic inductance, we derive the thermal phase noise, and hence the thermal rotational noise of the gyroscope. We examine the thermodynamic stability of the system based on an analysis of the free energy. We derive a quantum phase noise, which is analogous to the zero-point motion of a simple harmonic oscillator. The configuration of the studied gyroscope is analogous to a conventional superconducting RF SQUID. We show that the gyroscope has very low intrinsic noise (1.9x10(-13) rad s(-1)/root Hz), and it can potentially be applied to study general relativity, Earth science, and to improve global positioning systems (GPS).

Penanen, Konstantin↗

Generation of 369.4 nm Radiation by Efficient Doubling of a Diode Laser

The trapped ytterbium ion frequency standard under development at JPL is designed to supply ultra-stable reference signals to be used in spacecraft tests of general relativity and other science experiments. Only diode lasers meet the requirements of low power comsumption and small size for use aboard spacecraft, but diode lasers are not currently available at 369.4 nm wavelength. It is therefore necessary to employ frequency doubling methods to reach this frequency with diode lasers. Here we present the characteristics of the resonant cavity doubling system we have designed and preliminary UV conversion results.

ultra-stable↗

GW190814: Gravitational Waves from the Coalescence of a 23 Solar Mass Black Hole with a 2.6 Solar Mass Compact Object

We report the observation of a compact binary coalescence involving a 22.2–24.3 Me black hole and a compact object with a mass of 2.50–2.67Me (all measurements quoted at the 90% credible level). The gravitational-wavesignal, GW190814, was observed during LIGO’s and Virgo’s third observing run on 2019 August 14 at 21:10:39 UTC and has a signal-to-noise ratio of 25 in the three-detector network. The source was localized to18.5 deg2 at a distance of-+2414541Mpc; no electromagnetic counterpart has been confirmed to date. The source has the most unequal mass ratio yet measured with gravitational waves,-+0.1120.0090.008, and its secondary component is either the lightest black hole or the heaviest neutron star ever discovered in a double compact-object system. The dimensionless spin of the primary black hole is tightly constrained to 0.07. Tests of general relativity reveal no measurable deviations from the theory, and its prediction of higher-multipole emission is confirmed at high confidence. We estimate a merger rate density of 1–23 Gpc−3yr−1 for the new class of binary coalescence sources that GW190814 represents. Astrophysical models predict that binaries with mass ratios similar to this event can form through several channels, but are unlikely to have formed in globular clusters. However, the combination of mass ratio, component masses, and the inferred merger rate for this event challenges all current models of the formation and mass distribution of compact-object binaries.

Gravitational wave astronomy↗

Next generation lunar laser retroreflectors for fundamental physics and lunar science

Lunar Laser Ranging (LLR) data represent a powerful tool to understand the dynamics of the Earth-Moon system and the deep lunar interior. Over the past five decades, the ground station technology has significantly improved, whereas the lunar laser retroreflector arrays (LRAs) on the lunar surface did not. Current instrumental LLR error budget is dominated by the spread of the returning laser pulse due to the large size of the arrays. Next-generation single solid lunar Cube Corner Retroreflectors (CCRs) of large optical diameter (whose LLR performance is unaffected by that time spread) aim to fully exploit the current laser ranging station capabilities to attain LLR accuracy below current centimeter value down to the desired millimeter level and much higher data collection rates. Such improvements will have a significant impact, enabling more refined ephemerides, improved tests of General Relativity (GR) and of other theories of relativistic gravity in the Sun-Earth-Moon system and improved knowledge of the properties of the lunar interior.

L. Porcelli↗

The Chemical and Isotopic Signatures of the Hibonite-rich FUN Inclusion "HIDALGO" in Dar al Gani 027 (CO3)

Refractory Ca-Al-rich Inclusions (CAIs) with FUN (Fractionation with Unidentified Nuclear effects) characteristics are peculiar samples among all high-temperature components in chondritic meteorites. They are generally characterized by strong mass-dependent isotopic fractionations in several elements (e.g., O, Mg, Ca, Ti), large (~5-20‰) enrichments or depletions in neutron-rich isotopes (e.g., 48 Ca, 50 Ti, 54 Cr), and low inferred abundances of 26 Al ( 26 Al/ 27 Al < 1×10 −5 ). Understanding the origins of these features in FUN CAIs can shed light on the astrophysical environment and chemical processes that took place in the early Solar System. A large fraction (slightly less than 50%) of the ~20 FUN CAIs discovered so far are hibonite-rich (such as HAL, SHAL and DH-H1, collectively called HAL-type inclusions hereafter). According to their elemental and isotopic signatures and the results of evaporation experiments, HAL-type inclusions are thought to have formed as a distillation residue. However, questions regarding the timing of the formation of HAL-type inclusions (or FUN inclusions in general) relative to those of regular CAIs and the decoupling between the 26 Al abundances and nucleosynthetic anomalies remain poorly understood. In 2021, we reported the discovery of a new HAL-type inclusion, HIDALGO (Hibonite in Dar al Gani CO3) in the CO3 chondrite Dar al Gani 027 (DaG027), based on its (fractionated) oxygen isotopic compositions and low inferred 26 Al/ 27 Al ratio of (1.50±0.02)×10 −5 . Since then, more work on other short-lived and stable isotope systems and trace element abundances has been conducted. Here we report these new results and discuss the implications for the possible formation history of HIDALGO and origins of shortlived radionuclides (SLRs).

Meteorite↗

Mercury-T: A New Code to Study Tidally Evolving Multi-Planet Systems. Applications to Kepler-62

A large proportion of observed planetary systems contain several planets in a compact orbital configuration, and often harbor at least one close-in object. These systems are then most likely tidally evolving. We investigate how the effects of planet-planet interactions influence the tidal evolution of planets. We introduce for that purpose a new open-source addition to the Mercury N-body code, Mercury-T, which takes into account tides, general relativity and the effect of rotation-induced flattening in order to simulate the dynamical and tidal evolution of multi-planet systems. It uses a standard equilibrium tidal model, the constant time lag model. Besides, the evolution of the radius of several host bodies has been implemented (brown dwarfs, M-dwarfs of mass 0:1 M(sub ⨀), Sun-like stars, Jupiter). We validate the new code by comparing its output for one-planet systems to the secular equations results. We find that this code does respect the conservation of total angular momentum. We applied this new tool to the planetary system Kepler-62. We find that tides influence the stability of the system in some cases. We also show that while the four inner planets of the systems are likely to have slow rotation rates and small obliquities, the fifth planet could have a fast rotation rate and a high obliquity. This means that the two habitable zone planets of this system, Kepler-62e ad f are likely to have very different climate features, and this of course would influence their potential at hosting surface liquid water..

Dynamical evolution and stability↗

Methods of analyzing crude oil

The invention generally relates to methods of analyzing crude oil. In certain embodiments, methods of the invention involve obtaining a crude oil sample, and subjecting the crude oil sample to mass spectrometry analysis. In certain embodiments, the method is performed without any sample pre-purification steps.

36 MATERIALS SCIENCE↗

Zero voltage mass spectrometry probes and systems

The invention generally relates to zero volt mass spectrometry probes and systems. In certain embodiments, the invention provides a system including a mass spectrometry probe including a porous material, and a mass spectrometer (bench-top or miniature mass spectrometer). The system operates without an application of voltage to the probe. In certain embodiments, the probe is oriented such that a distal end faces an inlet of the mass spectrometer. In other embodiments, the distal end of the probe is 5 mm or less from an inlet of the mass spectrometer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Asymmetric battery having a semi-solid cathode and high energy density anode

Embodiments described herein relate generally to devices, systems and methods of producing high energy density batteries having a semi-solid cathode that is thicker than the anode. An electrochemical cell can include a positive electrode current collector, a negative electrode current collector and an ion-permeable membrane disposed between the positive electrode current collector and the negative electrode current collector. The ion-permeable membrane is spaced a first distance from the positive electrode current collector and at least partially defines a positive electroactive zone. The ion-permeable membrane is spaced a second distance from the negative electrode current collector and at least partially defines a negative electroactive zone. The second distance is less than the first distance. A semi-solid cathode that includes a suspension of an active material and a conductive material in a non-aqueous liquid electrolyte is disposed in the positive electroactive zone, and an anode is disposed in the negative electroactive zone.

25 ENERGY STORAGE↗

Fail-safe reactivity compensation method for a nuclear reactor

The present invention relates generally to the field of compensation methods for nuclear reactors and, in particular to a method for fail-safe reactivity compensation in solution-type nuclear reactors. In one embodiment, the fail-safe reactivity compensation method of the present invention augments other control methods for a nuclear reactor. In still another embodiment, the fail-safe reactivity compensation method of the present invention permits one to control a nuclear reaction in a nuclear reactor through a method that does not rely on moving components into or out of a reactor core, nor does the method of the present invention rely on the constant repositioning of control rods within a nuclear reactor in order to maintain a critical state.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Electrochemical energy storage devices comprising self-compensating polymers

The disclosed technology relates generally to devices comprising conductive polymers and more particularly to electrochemical devices comprising self-compensating conductive polymers. In one aspect, electrochemical energy storage device comprises a negative electrode comprising an active material including a redox-active polymer. The device additionally comprises a positive electrode comprising an active material including a redox-active polymer. The device further comprises an electrolyte material interposed between the negative electrode and positive electrode and configured to conduct mobile counterions therethrough between the negative electrode and positive electrode. At least one of the negative electrode redox-active polymer and the positive electrode redox-active polymer comprises a zwitterionic polymer unit configured to reversibly switch between a zwitterionic state in which the zwitterionic polymer unit has first and second charge centers having opposite charge states that compensate each other, and a non-zwitterionic state in which the zwitterionic polymer unit has one of the first and second charge centers whose charge state is compensated by mobile counterions.

25 ENERGY STORAGE↗

Methods and compositions for the upconversion of light

The present invention generally relates to composition and methods for upconverting light. In some embodiments, the composition and methods comprise an organic material, a nanocrystal, and a ligand capable of facilitating energy transfer between the nanocrystal and the organic material. In certain embodiments, the nanocrystal has a first excited energy state with an energy greater than a triplet state of the organic material. The organic material, in some embodiments, may be aromatic and/or include one or more pi-conjugated carbon-carbon double bonds. In some cases, incident light may be absorbed by the nanocrystal to produce triplet excitons. The triplet excitons may then transfer from the nanocrystal to the organic material and undergo triplet-triplet annihilation, creating a singlet state of approximately twice the energy of the triplet exciton. In certain embodiments, the singlet state fluoresces, resulting in the formation of a high energy photon.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Redox active polymer devices and methods of using and manufacturing the same

The disclosed technology relates generally to apparatus comprising conductive polymers and more particularly to tag and tag devices comprising a redox-active polymer film, and method of using and manufacturing the same. In one aspect, an apparatus includes a substrate and a conductive structure formed on the substrate which includes a layer of redox-active polymer film having mobile ions and electrons. The conductive structure further includes a first terminal and a second terminal configured to receive an electrical signal therebetween, where the layer of redox-active polymer is configured to conduct an electrical current generated by the mobile ions and the electrons in response to the electrical signal. The apparatus additionally includes a detection circuit operatively coupled to the conductive structure and configured to detect the electrical current flowing through the conductive structure.

36 MATERIALS SCIENCE↗