Search NASA⌕ Search

SEARCH · Search NASA

Results for “Geodetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

GSFC orbit computations for ISAGEX operations

The objective of the program is to collect a set of homogeneous and well distributed precise laser and camera satellite observations for the purpose of dynamic and geometric geodesy. The data gathering portion of the experiment extended from December 15, 1970 to August 31, 1971 and consisted of seven three-week saturation tracking periods. The seven geodetic satellites tracked were BE-B, BE-C, GEOS-1, GEOS-2, DI-C, DI-D, and PEOLE. The techniques employed to generate acquisition data for the two lasers are described. Analyses of the quick-look Astrosoviet NAFA-25 camera data indicated that the accuracy of these data was on the order of a few minutes of arc. These data were useful in definitive orbit determination.

Agreen, R. W.↗

The effects of tracking station coordinate uncertainties on GEOS-2 orbital accuracy

Laser and minitrack observational data from GEOS-2 collected during the period April 23, 1971 to May 1971, have been used for the purpose of assessing the influence of tracking station location on the accuracy of orbit determination. These data were processed using a unified set of coordinates for the tracking station locations. Concurrently, these data were processed using nonunified station locations referred to a variety of geodetic datums. The resultant orbits based on the two different sets of station locations were compared and relative differences in the position of the satellite were determined. Differences between the two groups of orbits fitted over four-day data spans ranged from 250 meters to 500 meters for orbits derived from laser data only. For orbits observed from Minitrack data alone the relative differences in GEOS-2 spacecraft position ranged from 50 meters to 190 meters. Utilizing the laser data alone in each arc, definitive orbits were computed using the unified and nonunified station location coordinates. The differences in the satellite position in the overlap region when using the unified laser station coordinates ranged from 25 meters to 150 meters, whereas when using the nonunified laser station coordinates the differences in position ranges from 180 to 650 meters.

Glazer, J.↗

Satellite time synchronization of a NASA network.

A satellite time synchronization technique has been used for synchronization of remotely separated clocks during the past several years. The NASA network has been successfully synchronized to an accuracy of tens of microseconds via the NASA Geodetic Earth Orbiting Satellite GEOS-11. The results indicate that a polar orbit satellite having an onboard clock can effectively be used to synchronize clocks on a global basis.

Laios, S. C.↗

Characteristics of ocean-reflected short radar pulses with application to altimetry and surface roughness determination

Current work related to geodetic altimetry is summarized. Special emphasis is placed on the effects of pulse length on both altimetry and sea-state estimation. Some discussion is also given of system tradeoff parameters and sea truth requirements to support scattering studies. The problem of analyzing signal characteristics and altimeter waveforms arising from rough surface backscattering is also considered.

Miller, L. S.↗

Comments on ocean circulation with regard to satellite altimetry

Basic features of sea surface topography are reviewed, to show those oceanographic results which may be of value to a geodetic satellite program: (1) the shape and magnitude of the large scale features of the mean sea surface, relative to a level surface; (2) the position and magnitude of the slopes across the western boundary currents, from a variety of data; (3) an estimate of the position of the geoid, tied into the U.S. leveling network; and (4) a documented change of 60 to 70 cm in mean sea level, with respect to the geoid, between the U.S. east and west coasts.

Sturges, W.↗

Effect of parallactic refraction correction on station height determination

The effect of omitting the parallactic refraction correction for satellite optical observations in the determination of station coordinates is analyzed for a large satellite data distribution. A significant error effect is seen in station heights. A geodetic satellite data distribution of 23 close earth satellites, containing 30,000 optical observations obtained by 13 principal Baker-Nunn camera sites, is employed. This distribution was used in a preliminary Goddard Earth Model (GEM 1) for the determination of the gravity field of the earth and geocentric tracking station locations. The parallactic refraction correction is modeled as an error on the above satellite data and a least squares adjustment for station locations is obtained for each of the 13 Baker-Nunn sites. Results show an average station height shift of +8 meters with a dispersion of plus or minus 0.7 meters for individual sites. Station latitude and longitude shifts amounted to less than a meter. Similar results are obtained from a theoretical method employing a probability distribution for the satellite optical observations.

Lerch, F. J.↗

Free adjustment of a geometric global satellite network (solution MPS-7)

The basic purpose of this experiment was to compute reduced normal equations from the observational data of several different systems described below to combine them eventually with the normal equations of the Wild BC-4 observations taken in the DOD/DOC cooperative worldwide geodetic satellite program and provide station coordinates from a single least squares adjustment. The solution described is a partial one obtained without the use of the BC-4 data. The observational systems combined were the Baker-Nunn simultaneous camera observational systems combined were the Baker-Nunn simultaneous camera observations from the SAO worldwide network, the MOTS and PC-1000 optical observations in North America, miscellaneous camera observations in Europe which were included in the SAO69 solution, and, lastly, a group of optical observations where Baker-Nunn cameras observed simultaneously with MOTS and/or PC-1000 cameras in the previously mentioned group.

Mueller, I. I.↗

GEOS-2 C-band radar system project. Marine study using C-band radars

One of the secondary objectives of the GEOS-2 C-band Systems Project is to study the feasibility of using geodetic satellites to both evaluate shipborne instrumentation and to determine ship positions in broad ocean areas. The purpose of this task is to determine whether shipborne C-band radar tracking, in conjunction with ground based tracking, is sufficiently accurate to provide instrumentation evaluation and ship position estimates. Data from several Apollo tracking ships, in particular the USNS Vanguard, was made available for this effort. A series of tests, using the USNS Vanguard, were carried out in the Port Canaveral and Bahama Acoustic Transponder Array Areas. The major portion of the analyses reported are the result of preliminary investigations using the data from these tests.

Source record↗

GEOS-2 C-band system project. C-band radars and their use on the GEOS-2 project

The material presented covers the general topic of C-band radars and their use throughout the GEOS-2 C-band Radar System Project and has direct application to the general problem of gathering accurate radar tracking data. The material is hardware oriented and all analyses and evaluations described pertain to the gathering of accurate data rather than to the application of the gathered data. The radar oriented investigations formed a basic and necessary part of the overall C-band experiment. The successful completion of these efforts led to the definition of how the radars were to be operated and calibrated. These hardware decisions directly affected the quality of the radar data and therefore played a large part in the successful application of these data to geodetic research.

Source record↗

Quadrature errors in the partical derivatives required for the direct recovery of gravity anomalies from satellite observations

The equations of motion of a geodetic satellite in the earth's gravitational field expressed by gravity anomalies require the evaluation, amongst others, of the partial derivatives of the disturbing force with respect to individual gravity anomalies. Data are discussed on how anomaly blocks should be subdivided so that the partial derivatives may be numerically evaluated for each subdivision, and then finally meaned to give the value representative of the whole blocks, with accuracies better than 2 to 3 percent for all blocks. The number of subdivisions is large for the blocks nearest to the satellite subpoint and decreases away from it. The actual values of this spherical distance and the actual subdivision of the mean gravity anomaly blocks was determined numerically for 184 15 deg x 15 deg equal area blocks. Satellite heights above the earth of 400 km, 800 km and 1600 km were considered. The computer times for the suggested scheme were compared with alternative solutions.

Hajela, D. P.↗

Overall evaluation of ERTS imagery for cartographic application

The author has identified the following significant results. The apparently successful fitting of a plane coordinate (UTM) grid to an ERTS-1 bulk image represents a breakthrough of potential economic importance. If such results continue to be attained it means that ERTS-1 imagery even in bulk form can be reproduced as planimetric image maps that meet National Map Accuracy Standards up to the 1:250,000 scale. Such maps permit positions of image points to be geodetically defined to within 75 meters (rms). Previous efforts to map with ERTS-1 images resulted in errors approaching 300 meters (rms).

Colvocoresses, A. P.↗

Coordinate transformation by minimizing correlations between parameters

This investigation was to determine the transformation parameters (three rotations, three translations and a scale factor) between two Cartesian coordinate systems from sets of coordinates given in both systems. The objective was the determination of well separated transformation parameters with reduced correlations between each other, a problem especially relevant when the sets of coordinates are not well distributed. The above objective is achieved by preliminarily determining the three rotational parameters and the scale factor from the respective direction cosines and chord distances (these being independent of the translation parameters) between the common points, and then computing all the seven parameters from a solution in which the rotations and the scale factor are entered as weighted constraints according to their variances and covariances obtained in the preliminary solutions. Numerical tests involving two geodetic reference systems were performed to evaluate the effectiveness of this approach.

Kumar, M.↗

Position from gravity

Procedures for obtaining position from surface gravity observations are reviewed and their relevance assessed in the context of the application of modern geodetic techniques to programs of Earth and ocean physics. Solutions based on the use of surface layer techniques, the discrete value approach, and the development from Green's theorem are stated in summary, the latter being extended to order e cubed in the height anomaly. The representation of the surface gravity field which is required in order that this accuracy may be achieved is discussed. Interim techniques which could be used in the absence of such a representation are also outlined.

Mather, R. S.↗

A global station coordinate solution based upon camera and laser data - GSFC 1973

Results for the geocentric coordinates of 72 globally distributed satellite tracking stations consisting of 58 cameras and 14 lasers are presented. The observational data for this solution consists of over 65,000 optical observations and more than 350 laser passes recorded during the National Geodetic Satellite Program, the 1968 Centre National d'Etudes Spatiales/Smithsonian Astrophysical Observatory (SAO) Program, and International Satellite Geodesy Experiment Program. Dynamic methods were used. The data were analyzed with the GSFC GEM and SAO 1969 Standard Earth Gravity Models. The recent value of GM = 398600.8 cu km/sec square derived at the Jet Propulsion Laboratory (JPL) gave the best results for this combination laser/optical solution. Solutions are made with the deep space solution of JPL (LS-25 solution) including results obtained at GSFC from Mariner-9 Unified B-Band tracking. Datum transformation parameters relating North America, Europe, South America, and Australia are given, enabling the positions of some 200 other tracking stations to be placed in the geocentric system.

Marsh, J. G.↗

Identification and interpretation of tectonic features from ERTS-1 imagery

The author has identified the following significant results. Significant results from ERTS-1 imagery are: (1) Several new lineaments or faults have been identified. (2) Study of navigational maps and the ERTS-1 imagery suggests significant mapping errors in the geodetic position of Baja California.

Abdel-Gawad, M.↗

Overall evaluation of ERTS-1 imagery for cartographic application

The author has identified the following significant results. Scientific results may be summarized as follows: (1) A geodetic (UTM) grid can be fitted to MSS bulk images with a positional accuracy in the order of 50 meters (rms). (2) The MSS imagery as corrected and printed in bulk form is in effect or a defined map projection. This projection, if optimized for cartographic presentation, will have distortions in the order of only 1 part in 10,000. (3) The orbit of ERTS-1 and image delineation of MSS imagery can be held by NASA so that predesignated scenes may be identified and used as a basis for a map series. This concept could reduce the time and cost of ERTS-1 image map production many fold as compared to standard quadrangle format production.

Colvocoresses, A. P.↗

Mariner 9 control net of Mars, April 1973

A planet-wide geodetic control net of Mars that is based on the Mariner 9 television pictures has been in the process of being computed since January 1972. Results of the computations as of April 1973 are presented. Areocentric and areographic coordinates of 1340 control points have been computed using 613 frames and are presented tabularly. These coordinates will be revised as additional points and frames are added to the computation in the future.

Davis, M. E.↗

Cartographic products from the Mariner 9 mission

Simultaneous acquisition of geodetic, cartographic, geologic, and other scientific data on Mars from Mariner 9 required extensive modification of conventional methods of mapping. Preliminary evaluation of all data simultaneously generated an inordinately large number of interim cartographic products for a final cartographic atlas of Mars. The selection of the scales at which Mars would be mapped, the projections to be used, and the way the planet would be divided into quadrangles was based on the resolution of Mariner 9 pictures and upon the resources available over the lifetime of the Mariner Mars 1971 Project.

Batson, R. M.↗