Search NASA⌕ Search

SEARCH · Search NASA

Results for “Heterostructures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Exchange Spring in a Heterostructure with Pd{sub 0.96}Fe{sub 0.04} Low-Temperature Ferromagnet

The exchange bias of the magnetic hysteresis loop and the exchange-spring effect have been observed in thin-film heterostructures comprising layers of Pd{sub 0.96}Fe{sub 0.04} low-temperature ferromagnet, metallic cobalt, and cobalt monoxide (CoO) grown on single-crystalline sapphire by methods of magnetron sputtering and molecular beam epitaxy in an ultrahigh-vacuum system. It is established that the exchange anisotropy of Pd{sub 0.96}Fe{sub 0.04} layer in Pd{sub 0.96}Fe{sub 0.04}/CoO/Co/Al{sub 2}O{sub 3} thin-film heterostructure is absent and the exchange-spring effect in this system is not manifested. In the case of a Pd{sub 0.96}Fe{sub 0.04}/Co/CoO/Al{sub 2}O{sub 3} structure, it is shown that, according to the results of magnetometric measurements, the inversion of the order of antiferromagnetic and ferromagnetic layers leads to pinning of the magnetic moment of Pd{sub 0.96}Fe{sub 0.04} layer at the interface with cobalt and to realization of the exchange-spring effect. Additional evidence in favor of this interpretation was obtained using the micromagnetic modeling of magnetic hysteresis loops.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growing III–V Semiconductor Heterostructures on SiC/Si Substrates

A three-layer heterostructure consisting of AlN (∼0.72 μm thick), AlGaN (∼ 1.82 μm thick), and GaN (∼2.2 μm thick) layers has been grown by hydride–chloride vapor phase epitaxy (HVPE) method on a Si substrate with a SiC buffer nanolayer. The heterostructure was studied using scanning electron microscopy, energy-dispersive X-ray spectroscopy, and other techniques. The results showed that SiC/Si substrates can be used for growing films of III–V semiconductor compounds by HVPE at a high rate (~66 μm/h) free of cracks and with small residual elastic stresses (~160 MPa).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controllable growth of layered selenide and telluride heterostructures and superlattices using molecular beam epitaxy

Layered materials are an actively pursued area of research for realizing highly scaled technologies involving both traditional device structures as well as new physics. Lately, non-equilibrium growth of 2D materials using molecular beam epitaxy (MBE) is gathering traction in the scientific community and here we aim to highlight one of its strengths, growth of abrupt heterostructures, and superlattices (SLs). In this work we present several of the firsts: first growth of MoTe 2 by MBE, MoSe 2 on Bi 2 Se 3 SLs, transition metal dichalcogenide (TMD) SLs, and lateral junction between a quintuple atomic layer of Bi 2 Te 3 and a triple atomic layer of MoTe 2 . In conclusion, reflected high electron energy diffraction oscillations presented during the growth of TMD SLs strengthen our claim that ultrathin heterostructures with monolayer layer control is within reach.

2D materials↗

Artificial Graphene in Undoped Semiconductor Heterostructures

The linear energy-momentum dispersion which arises from graphene’s underlying honeycomb lattice gives graphene its unique electronic properties unfound in conventional semiconductors. Theoretically speaking, when an electrostatic potential with hexagonal or honeycomb symmetry is imposed onto a two-dimensional electron/hole system, the band structure is modified in a way that the same linear energy-momentum dispersion could exist. Experimentally, there has not been any evidence from transport demonstrating the so-called “artificial graphene”. In this project, we attempt to create an artificial superlattice potential with hexagonal symmetry for two dimensional carriers in an undoped SiGe heterostructure by patterning a nanoscale hole array in a metallic gate. Using undoped heterostructures allows us to access a very wide density range, which covers the magic densities at which the Dirac points are expected. A process flow for fabricating such field-effect-transistor devices with a lattice constant as small as 90 nm is reported. Magneto-transport measurements performed at 0.3 K show that the superlattice potential in the quantum well in which the two-dimensional system resides is indeed modulated by the gates. However, no signature of the sought-after linear dispersion is observed in the transport data.

36 MATERIALS SCIENCE↗

Mesoscale Design of Magnetoelectric Heterostructures and Nanocomposites

Multiferroic materials have a coexistence of at least two ferroic orders. The coupling interaction between the different order parameters can produce new phenomena, such as the magnetoelectric (ME) effect. The ME response is the appearance of an electric polarization P upon applying a magnetic field H, and/or vice versa. Magnetoelectricity has been observed as an intrinsic effect in some natural materials at low temperature; however, such single phase materials suffer from extremely weak ME exchange. Better alternatives are two-phase composites consisting of magnetostrictive and piezoelectric phases, which have been shown to have large ME coefficients. Said composites exploit a unique product ME tensor property that depends upon the individual strictions of the piezoelectric and magnetostrictive phases, the elastic stiffness and integrity of the interphase interfaces, the phase distribution and the dimensionality of its connectivity, and any elastic constraint; amongst other things. This research program between D. Viehland PI and S.Priya at Virginia Tech investigated the mesoscale physics and chemistry of such two-phase ME heterostructures. The results of the proposed research are relevant to new generations of multifunctional materials involving heterogeneous components. How the product ME property be optimized? The answers lies with the interphase-interfaces, where the atomic layers coordinate stress transfer from one phase to another. It was the primary goal of this research program to discover such fundamental relationship for two phase ME heterostructures and nanocomposites. This research program integrated all the components required to fully investigate the ME phenomenon: starting from synthesis of nanomaterials with diversified interfacial characteristics; to full electrical, magnetic, and structural characterizations.

36 MATERIALS SCIENCE↗

Engineering of Lead Selenide Quantum Dot Based Devices and Core/Shell Heterostructures

Near infrared (NIR) emitting colloidal quantum dots (QDs) such as PbSe are interesting materials for implementation in various optoelectronic devices such as solar cells, photodetectors, and radiation detectors. Material properties like size tunable emission wavelengths, facile solution processability, the possibility of carrier multiplication and Auger assisted up-conversion, and high Z number provide PbSe QDs with unique advantages over many currently available commercial materials used in these devices. In this dissertation, after an introduction to QDs in general, we first focus on synthesis of PbSe-based heterostructured QDs for study via optical spectroscopy. PbSe/CdSe QDs synthesized via cation exchange reaction were used as seeds to study the proper conditions for further CdSe or CdS shell growth. Optical spectroscopy studies show that growth of thicker CdSe shells leads to tunable visible emission, while growth of thick CdS shells can greatly increase the photoluminescence quantum yield (PLQY) observed from the intermediate CdSe shell. NIR PL lifetimes can be greatly enhanced by the growth of CdS shells, due to strong delocalization of the hole wavefunction within the PbSe core, while the electron is delocalized throughout the QD including in the CdS shell, resulting in radiative lifetimes in the tens of microseconds. Two pulse delay measurements show that Auger assisted up conversion is also taking place in these engineered QD dot heterostructures. In the sections that follow, we look at QD devices, first with a focus on novel devices fabricated from PbSe QDs, using an amine synthesis method that allows for facile in-solution ligand exchange. QD film mobilities are measured for PbSe QDs capped with various short ionic ligands. Carrier densities in PbSe QD films are calculated from C-V measurements, showing for the first time that carrier densities can be modulated by simply changing the capping ligand. vii Radiation detectors utilizing PbSe QDs capped with KI and NH4I ligands show tangible response to incident alpha radiation. Current output response to alpha radiation is dependent on strength of radiation source and amount of bias voltage applied. In the final section a critical review of hybrid layered 2D-QD photodetectors is presented. In a typical example, PbSe and PbS QDs act as the absorbing layer in phototransistor devices which utilize layered 2D materials such as graphene and transition metal dichalcogenides as transport layers. Resulting devices display high gains and improved directivities compared to QD only and 2D only devices.

36 MATERIALS SCIENCE↗

Spin orbit torque in ferromagnet/topological-quantum-material heterostructures

The main objective of this proposal was to investigate the spin-orbital driven phenomena in topological insulator (TI)/ferromagnet (FM) or transition metal (TM) heterostructures. In particularly, we tried to utilize the spin-momentum locking properties on the surface of TIs to achieve ideal spin-orbit torques (SOTs). In practice, we found that the surface properties have been greatly modified, resulting in much more complicated magneto-transport behaviors than what is expected in SOT-driven magnetotransport. Through systematic and extended investigations, we start to unravel that the nonlinear magnetotransport properties, which was, in the past, mainly attributed to SOT-driven phenomena, can be used to infer the modification of the electronic band structures of TIs and spin textures in FMs which are closely related with charge-spin interconversion phenomena. Regarding the band structures In TIs, we find under electrostatic perturbations imposed by deposition of nonmagnetic TMs, the quantum well states formed on the surface of TIs develop substantial Rashba spin-splitting, which is detected as a bilinear magnetoresistance (BMR). Under magnetic perturbations, the nonlinear planar Hall effect (NPHE) in the topological surface states is greatly enhanced, possibly reflecting the modified surface band structure due to time-reversal symmetry breaking. In a double HM/FM heterostructure where the magnetic anisotropy can be robustly tuned, we observed second-harmonic Hall voltage responses corresponding to domain wall structures with fixed chirality, stabilized by interfacial Dzyaloshinskii–Moriya interaction (DMI). In addition, in the linear transport regime, we utilized inverse-SHE-induced anomalous Hall effect in Pt to probe the exchange bias on the surface of a doped magnetic insulator Tm 3 Fe 5 O 12 .

36 MATERIALS SCIENCE↗

Final Technical Report for DE-SC0021049: Manipulating interfacial reactivity with atomically layered heterostructures

This final technical report summarizes the work accomplished in this DOE Early Career Research Program project that has established moiré superlattice materials and two-dimensional (2D) heterostructures as a highly tunable platform for controlling heterogeneous charge transfer (ET) kinetics at solid-liquid interfaces. By precisely engineering van der Waals heterostructures of atomically thin 2D materials, particularly bilayer and trilayer graphene with controlled twist angles, this project demonstrated systematic control of interfacial charge transfer rates spanning three orders of magnitude. This research addresses fundamental questions about how electronic structure, charge localization, and atomic layer-dependent properties govern charge transfer at electrochemical interfaces, with broad implications for energy conversion, electrocatalysis, and next-generation electrochemical devices.

36 MATERIALS SCIENCE↗

Ultrafast Light-Induced Magnetoelectric Effect in van der Waals Magnetic Semiconductor Heterostructures

Atomic-scale heterostructures of van der Waals (vdW) magnets and semiconductors provide a unique environment for exploring magnetic dynamics. In contrast to typical photothermal excitation of precessional magnetization dynamics by a pump laser pulse, we find that ultrafast optical excitation of a WS2/CrGeTe3 (CGT) bilayer produces an opposite sign of magnetic torque compared to an isolated CGT film. Experimental observations by time-resolved magneto-optic Kerr effect (TR-MOKE) and theoretical analysis by density functional theory (DFT) and Landau-Lifshitz-Gilbert (LLG) simulations support a mechanism in which charge transfer of photoexcited carriers across the interface alters the perpendicular magnetic anisotropy, which in turn generates a torque on the magnetic layer to trigger precessional magnetization dynamics. These results provide new avenues for ultrafast manipulation of magnetization in vdW heterostructures with type-II band alignments. Lastly, we show that optically-generated spin currents from WS2 into CGT can also trigger precessional dynamics via angular momentum transfer.

Zhou, Wenyi [The Ohio State University]↗

Characterization of Mn 5 Ge 3 Contacts on a Shallow Ge/SiGe Heterostructure

Mn 5 Ge 3 is a ferromagnetic phase of the Mn-Ge system that is a potential contact material for efficient spin injection and detection. Here, we investigate the creation of Mn 5 Ge 3 -based contacts on a Ge/SiGe quantum well heterostructure via solid-state synthesis. X-ray diffraction spectra fitting indicates the formation of Mn 5 Ge 3 -based contacts on bulk Ge and Ge/SiGe. High-resolution scanning transmission electron microscopy imaging and energy dispersive X-ray spectroscopy verify the correct Mn 5 Ge 3 -based phase formation. Schottky diode measurements, transmission line measurements, and Hall measurements reveal that Mn 5 Ge 3 -based contacts serve as good p-type contacts for Ge/SiGe quantum well heterostructures due to having a low Schottky barrier height of 0.10 eV (extracted from a Mn 5 Ge 3 /n-Ge analogue) and a contact resistance in the order of 1 kΩ. Furthermore, we show that these electrical characteristics have a gate-voltage dependence, thereby providing tunability.

36 MATERIALS SCIENCE↗

Si-doped β -(Al 0.26 Ga 0.74 ) 2 O 3 thin films and heterostructures grown by metalorganic vapor-phase epitaxy

We report on n-type degenerate doping in β-(Al 0.26 Ga 0.74 ) 2 O 3 epitaxial thin films grown by metalorganic vapor-phase epitaxy and modulation doping in β-(Al 0.26 Ga 0.74 ) 2 O 3 /β-Ga 2 O 3 heterostructures. Here, the alloy composition is confirmed using high-resolution X-ray diffraction measurements. Carrier concentration in the thin films is proportional to the silane molar flow. Room-temperature Hall measurements showed a high carrier concentration of 6 × 10 18 cm –3 to 7.3 × 10 19 cm –3 with a corresponding electron mobility between 53–27 cm 2 V –1 s –1 in uniformly doped β-(Al 0.26 Ga 0.74 ) 2 O 3 layers. Modulation doping is used to realize a total electron sheet charge of 2.3 × 10 12 cm –2 in a β-(Al 0.26 Ga 0.74 ) 2 O 3 /β-Ga 2 O 3 heterostructure using a uniformly doped β-(Al 0.26 Ga 0.74 ) 2 O 3 barrier layer and a thin spacer layer.

36 MATERIALS SCIENCE↗

Single heterostructure lasers of PbS/1-x/Se/x/ and Pb/1-x/Sn/x/Se with wide tunability

Single-heterostructure diode lasers formed by compositional interdiffusion (CID) and liquid-phase epitaxy (LPE) of lead salts are discussed. The CID technique, which involves creation of a single heterostructure in a pseudobinary compound having binary constituents with different vapor pressures, is reviewed; growth of lead-salt crystals of various compositions is described. Some electrical and optical characteristics, including properties indicative of high internal quantum efficiencies, are given for lasers which employ the CID and LPE diodes. High operating temperatures (i.e., liquid nitrogen levels and above), together with wide tuning ranges (a diode wavelength of 12.7 microns is reported), make the lasers useful in high-resolution spectrometry and advanced trace-gas monitoring systems.

Linden, K. J.↗

Electron mobility in modulation-doped heterostructures

A model for electron mobility in a two-dimensional electron gas confined in a triangular well was developed. All major scattering processes (deformation potential and piezoelectric acoustic, polar optical, ionized impurity, and alloy disorder) were included, as well as intrasubband and intersubband scattering. The model is applied to two types of modulation-doped heterostructures, namely GaAs-GaAlAs and In(0.53)Ga(0.47)As-Al(0.52)In(0.48)As. In the former case, phonons and remote ionized impurities ultimately limit the mobility, whereas in the latter, alloy disorder is a predominant scattering process at low temperatures. The calculated mobilities are in very good agreement with recently reported experimental characteristics for both GaAs-Ga(1-x)Al(x)As and In(0.53)Ga(0.47)As-Al(0.52)In(0.48)As modulation-doped heterostructures.

Walukiewicz, W.↗

High-efficiency double-heterostructure AlGaAs/GaAs solar cells

Double-heterostructure solar cells have been fabricated from wafers prepared by using organometallic chemical vapor deposition to grow a p GaAs absorbing layer sandwiched between p(+) and n(+) AlGaAs layers. The best cell, which incorporates an abrupt AlGaAs/GaAs shallow heterojunction, exhibits a global AM1 one-sun conversion efficiency of 23 percent. The rate at which the open-circuit voltage decreases with increasing temperature is lower for the double-heterostructure cells than for GaAs shallow-homojunction cells.

Gale, R. P.↗

Millimeter-wave and optoelectronic applications of heterostructure integrated circuits

The properties are reviewed of heterostructure devices for microwave-monolithic-integrated circuits (MMICs) and optoelectronic integrated circuits (OICs). Specific devices examined include lattice-matched and pseudomorphic InAlAs/InGaAs high-electron mobility transistors (HEMTs), mixer/multiplier diodes, and heterojunction bipolar transistors (HBTs) developed with a number of materials. MMICs are reviewed that can be employed for amplification, mixing, and signal generation, and receiver/transmitter applications are set forth for OICs based on GaAs and InP heterostructure designs. HEMTs, HBTs, and junction-FETs can be utilized in combination with PIN, MSM, and laser diodes to develop novel communication systems based on technologies that combine microwave and photonic capabilities.

Pavlidis, Dimitris↗

High-field transport properties of InAs(x)P(1-x)/InP (x = 0.3-1.0) modulation doped heterostructures at 300 and 77 K

Detailed measurements at 300 and 77 K have been made of the high-field transport properties of pseudomorphic InAsP/InP modulation-doped heterostructures grown by low-pressure organometallic CVD. The high-field channel velocities are comparable to or better than that of InGaAs/InAlAs heterostructures, and the transport properties of InAs/InP heterostucture suggest that carriers remain confined in the channel even at high fields.

Yang, D.↗

Space concentrator solar cells based on multilayer LPE grown AlGaAs/GaAs heterostructure

The high efficiency solar cells based on multilayer AlGaAs/GaAs heterostructures, prepared by low temperature liquid phase epitaxy (LPE), were developed and tested. An investigation of the low temperature LPE process for the crystallization of AlGaAs heterostructures of as high as 24.0 to 24.7 percent under AMO conditions at concentration ratios of 20 to 100x, were reached. Developed solar cells show substantial radiation resistance to the damage induced by 3.75 MeV electrons.

Khvostikov, V. P.↗

Characterization of High Ge Content SiGe Heterostructures and Graded Alloy Layers Using Spectroscopic Ellipsometry

Si(x)Ge(1-x)heterostructures on Si substrates have been widely studied due to the maturity of Si technology. However, work on Si(x)Ge)1-x) heterostructures on Ge substrates has not received much attention. A Si(x)Ge(1-x) layer on a Si substrate is under compressive strain while Si(x)Ge(1-x) on Ge is under tensile strain; thus the critical points will behave differently. In order to accurately characterize high Ge content Si(x)Ge(1-x) layers the energy shift algorithm used to calculate alloy compositions, has been modified. These results have been used along with variable angle spectroscopic ellipsometry (VASE) measurements to characterize Si(x)Ge(1-x)/Ge superlattices grown on Ge substrates. The results agree closely with high resolution x-ray diffraction measurements made on the same samples. The modified energy shift algorithm also allows the VASE analysis to be upgraded in order to characterize linearly graded layers. In this work VASE has been used to characterize graded Si(x)Ge(1-x) layers in terms of the total thickness, and the start and end alloy composition. Results are presented for a 1 micrometer Si(x)Ge(1-x) layer linearly graded in the range 0.5 less than or equal to x less than or equal to 1.0.

Heyd, A. R.↗