Search NASA⌕ Search

SEARCH · Search NASA

Results for “INDUCTION SYSTEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

THE DYNAMICS OF DUST GRAINS IN THE OUTER SOLAR SYSTEM

We study the dynamics of large dust grains {approx}>1 {mu}m with orbits outside of the heliosphere (beyond 250 AU). Motion of the solar system through the interstellar medium (ISM) at a velocity of 26 km s{sup -1} subjects these particles to gas and Coulomb drag (grains are expected to be photoelectrically charged) as well as the Lorentz force and the electric force caused by the induction electric field. We show that to zeroth order the combined effect of these forces can be well described in the framework of the classical Stark problem: particle motion in a Keplerian potential subject to an additional constant force. Based on this analogy, we elucidate the circumstances in which the motion becomes unbound, and show that under local ISM conditions dust grains smaller than {approx}100 {mu}m originating in the Oort Cloud (e.g., in collisions of comets) beyond 10{sup 4} AU are ejected from the solar system under the action of the electric force. Orbital motion of larger, bound grains is described analytically using the orbit-averaged Hamiltonian approach and consists of orbital plane precession at a fixed semimajor axis, accompanied by the periodic variations of the inclination and eccentricity (the latter may approach unity in some cases). A more detailed analysis of the combined effect of gas and Coulomb drag shows it is possible to reduce particle semimajor axes, but that the degree of orbital decay is limited (a factor of several at best) by passages through atomic and molecular clouds, which easily eject small particles.

79 ASTRONOMY AND ASTROPHYSICS↗

Radiation Protection and Dosimetry in Medicine - An Overview - Paper 82

In recent years, radiological protection, radiation safety and dosimetry issues have emerged concerning the medical applications of ionizing radiation. Amongst several other issues, the dissemination of the use of Computer Tomography (CT), including for paediatric exams and the growing number of interventional radiology and interventional cardiology procedures have contributed to raise the concerns about the need to more fully justify the medical practices using ionizing radiation and to optimize the protection, reducing the dose to the patients and to the medical staff in the medical applications of ionizing radiation. The importance of implementing the principle of justification in the medical exposures and to further progress in the implementation of the principle of optimization of the protection is of paramount importance for the establishment of a robust international system of radiological protection. The consideration of radiosensitivity issues became mandatory in order to address different issues such as the paediatric CT exposures and the risk of secondary cancer induction in patients years or decades after radiation treatments. Low-dose radiation research also gained a renewed interest in order to overcome longstanding unresolved issues concerning namely the relationship between the radiological risk versus dose in the low dose region characteristic of the medical radiodiagnostic procedures and to shed some light in the mechanisms associated to the biological effects induced by ionizing radiation. Last but not least, the safety of radiotherapy treatments has also driven considerable efforts from the international community of experts, with the aim of reducing the number of incidents and accidents leading to the overexposure of patients to ionizing radiation. In this paper, an overview of the aforementioned topics is provided, considering the international Basic Safety Standards, European Union Directives and national regulations. Views and policies from international organizations such as the IAEA, the WHO and studies and reports from institutions such as the UNSCEAR, ICRP and the NCRP will be conveyed. Recent or ongoing epidemiological studies will be mentioned. Radiological protection and dosimetry of the patient and the workers in the medical applications of ionizing radiation will be discussed. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

Improving the density functional theory description of water with self-consistent polarization

We present a comprehensive set of results for water, a case study of a hydrogen-bonded system, using the self-consistent polarization density functional theory (SCP-DFT). With minimal parametrization, SCP-DFT is found to give good results for the interaction energy of the dimer; the geometries, cohesion energies, and harmonic frequencies of larger clusters; and the structure and enthalpy of the liquid, as compared to accurate theoretical and experimental benchmarks. We also compared our SCP-DFT potential to the base DFT BLYP potential and also to a simpler dispersion-supplemented potential, BLYP-D. Using the symmetry-adapted perturbation theory (with a DFT description of monomers), the BLYP, BLYP-D, and SCP-DFT water dimer potentials were analyzed into their physically interpretable components. Comparison with the benchmark SAPT(DFT) components showed reasonable agreement for all the four components of electrostatics, exchange, induction, and dispersion energies. This procedure enhances understanding and can suggest further improvements. Thus, the SCP-DFT approach holds promise as a fast, efficient, and accurate method for performing ab initio dynamics that include additional polarization and dispersion interactions for large, complex systems involving solvation and bond breaking.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characteristic impedance and capacitance analysis of Blumlein type pulse forming line of accelerator based on tape helix

In this paper, the electromagnetic dispersion theory and the classic telegraph equations were combined to calculate the important parameters of the helical Blumlein pulse forming line (BPFL) of accelerator based on tape helix. In the work band of the BPFL at several hundred ns range, electromagnetic dispersion characteristics were almost determined by the zeroth harmonic. In order to testify the dispersion theory of BPFL in this paper, filling dielectrics, such as de-ionized water, transformer oil, and air were employed in the helical BPFL, respectively. Parameters such as capacitance, inductance, characteristic impedance, and pulse duration of the BPFL were calculated. Effects of dispersion on these parameters were analyzed. Circuit simulation and electromagnetic simulation were carried out to prove these parameters of BPFL filled with these three kinds of dielectrics, respectively. The accelerator system was set up, and experimental results also corresponded to the theoretical calculations. The average theoretical errors of impedances and pulse durations were 3.5% and 3.4%, respectively, which proved the electromagnetic dispersion analyses in this paper.

42 ENGINEERING↗

A Superconducting transformer system for high current cable testing

This article describes the development of a direct-current (dc) superconducting transformer system for the high current test of superconducting cables. The transformer consists of a core-free 10 464 turn primary solenoid which is enclosed by a 6.5 turn secondary. The transformer is designed to deliver a 50 kA dc secondary current at a dc primary current of about 50 A. The secondary current is measured inductively using two toroidal-wound Rogowski coils. The Rogowski coil signal is digitally integrated, resulting in a voltage signal that is proportional to the secondary current. This voltage signal is used to control the secondary current using a feedback loop which automatically compensates for resistive losses in the splices to the superconducting cable samples that are connected to the secondary. The system has been commissioned up to 28 kA secondary current. The reproducibility in the secondary current measurement is better than 0.05% for the relevant current range up to 25 kA. The drift in the secondary current, which results from drift in the digital integrator, is estimated to be below 0.5 A/min. The system's performance is further demonstrated through a voltage-current measurement on a superconducting cable sample at 11 T background magnetic field. The superconducting transformer system enables fast, high resolution, economic, and safe tests of the critical current of superconducting cable samples.

43 PARTICLE ACCELERATORS↗

Coordinated induction of GST and MRP2 by cAMP in Caco-2 cells: Role of protein kinase A signaling pathway and toxicological relevance

The cAMP pathway is a universal signaling pathway regulating many cellular processes including metabolic routes, growth and differentiation. However, its effects on xenobiotic biotransformation and transport systems are poorly characterized. The effect of cAMP on expression and activity of GST and MRP2 was evaluated in Caco-2 cells, a model of intestinal epithelium. Cells incubated with the cAMP permeable analog dibutyryl cyclic AMP (db-cAMP: 1,10,100 μM) for 48 h exhibited a dose–response increase in GST class α and MRP2 protein expression. Incubation with forskolin, an activator of adenylyl cyclase, confirmed the association between intracellular cAMP and upregulation of MRP2. Consistent with increased expression of GSTα and MRP2, db-cAMP enhanced their activities, as well as cytoprotection against the common substrate 1-chloro-2,4-dinitrobenzene. Pretreatment with protein kinase A (PKA) inhibitors totally abolished upregulation of MRP2 and GSTα induced by db-cAMP. In silico analysis together with experiments consisting of treatment with db-cAMP of Caco-2 cells transfected with a reporter construct containing CRE and AP-1 sites evidenced participation of these sites in MRP2 upregulation. Further studies involving the transcription factors CREB and AP-1 (c-JUN, c-FOS and ATF2) demonstrated increased levels of total c-JUN and phosphorylation of c-JUN and ATF2 by db-cAMP, which were suppressed by a PKA inhibitor. Co-immunoprecipitation and ChIP assay studies demonstrated that db-cAMP increased c-JUN/ATF2 interaction, with further recruitment to the region of the MRP2 promoter containing CRE and AP-1 sites. We conclude that cAMP induces GSTα and MRP2 expression and activity in Caco-2 cells via the PKA pathway, thus regulating detoxification of specific xenobiotics. - Highlights: • cAMP positively modulates the expression and activity of GST and MRP2 in Caco-2 cells. • Such induction resulted in increased cytoprotection against chemical injury. • PKA signaling pathway is involved downstream of cAMP. • Transcriptional MRP2 regulation ultimately involved participation of c-JUN and ATF2.

60 APPLIED LIFE SCIENCES↗

Direct Detection of SDSS J0926+3624 Orbital Expansion with ARCONS

AM Canum Venaticorum (AM CVn) stars belong to a class of ultra-compact, short period binaries with spectra dominated largely by helium. SDSS J0926+3624 is of particular interest as it is the first observed eclipsing AM CVn system. We observed SDSS J0926+3624 with the \textbf{Ar}ray \textbf{C}amera for \textbf{O}ptical to \textbf{N}ear-IR \textbf{S}pectrophotometry (ARCONS) at the Palomar 200" telescope. ARCONS uses a relatively new type of energy-resolved photon counters called Microwave Kinetic Inductance Detectors (MKIDs). ARCONS, sensitive to radiation from 350 to 1100 nm, has a time resolution of several microseconds and can measure the energy of a photon to $\sim10%$. We present the light curves for these observations and examine changes in orbital period from prior observations. Using a quadratic ephemeris model, we measure a period rate of change $\dot{P} = (3.07 \pm 0.56)\times 10^{-13}$. In addition, we use the high timing resolution of ARCONS to examine the system's high frequency variations and search for possible quasi-periodic oscillations (QPOs). Finally, we use the instrument's spectral resolution to examine the light curves in various wavelength bands. We do not find any high frequency QPOs or significant spectral variability throughout an eclipse.

79 ASTRONOMY AND ASTROPHYSICS↗

Autophagy induction in tobacco leaves infected by potato virus Y{sup O} and its putative roles

Autophagy plays a critical role in the innate immune response of plants to pathogen infection. In the present study, we examined autophagy induced by potato virus Y ordinary strain (PVY{sup O}) infection in tobacco (Nicotiana benthamiana). Enzyme-linked immunosorbent assays revealed that the number of virus particles in the plant peaked at 2 weeks post-inoculation and then gradually decreased. Additionally, the amount of virus increased significantly in the 3rd and 4th leaves distal to the inoculated leaf and decreased slightly in the 5th leaf. Within 2 weeks of PVY{sup O} inoculation, the tobacco leaves showed typical symptoms of Potyvirus inoculation, including mottling, yellowing, a mosaic pattern, and necrotic tissue changes at the inoculated site. Based on an ultrastructural analysis of the PVY{sup O}-infected tobacco leaves, virus aggregates appeared as longitudinal and transverse arrays and pinwheels, which are typical of Potyvirus inoculation. Moreover, PVY{sup O} infection caused changes in the number, size, and shape of chloroplasts, whereas the number of plastogranules increased markedly. Furthermore, double-membrane autophagosome-like vacuoles, including electron-dense materials, laminated structures, and cellular organelles, were found. The induction of autophagy after the PVY{sup O} infection of tobacco leaves was further confirmed by the expression of lipidated microtubule-associated protein 1 light chain 3 (LC3)-II, an autophagy marker and p62, an autophagy adaptor protein. The LC3-II levels increased daily over the 4-week period. Although virus inoculation was performed systemically on the basal leaves of the plants, LC3-II was expressed throughout the leaves and the expression was higher in leaves distal to the inoculated leaf. Moreover, PVY{sup O} infection caused the activation of stress-activated protein kinases/c-Jun N-terminal kinases. Therefore, PVY{sup O} infection-induced autophagy was positively correlated with the virus content, suggesting that autophagy induction following PVY{sup O} infection is involved in the anti-pathogen response of the host. -- Highlights: •The amount of PVY{sup O} revealed a peak at 2 weeks post-inoculation. •The amount of PVY{sup O} was higher in leaves distal to the inoculated leaf. •PVY{sup O} infection produced typical PVY infection symptoms. •Double-membranous vacuoles, including cellular organelles, were induced by PVY{sup O} infection. •PVY{sup O} infection induced LC3-II and JNK activation.

60 APPLIED LIFE SCIENCES↗

Hyperfractionated Low-Dose (21 Gy) Radiotherapy for Cranial Skeletal Metastases in Patients With High-Risk Neuroblastoma

Purpose: To present a large experience (73 patients) using a standard radiotherapy (RT) protocol to prevent relapse in cranial sites where measurable metastatic neuroblastoma (NB), an adverse prognostic marker, is common. Methods and Materials: High-risk NB patients with measurable cranial disease at diagnosis or residual cranial disease after induction therapy had those sites irradiated with hyperfractionated 21 Gy; a brain-sparing technique was used for an extensive field. The patients were grouped according to the response to systemic therapy. Thus, when irradiated, Group 1 patients were in complete remission and Group 2 patients had primary refractory disease. Follow-up was from the start of cranial RT. Results: At 3 years, the 39 Group 1 patients had a progression-free survival rate of 51%; control of cranial disease was 79%. Two relapses involved irradiated cranial sites. Two other patients relapsed in the irradiated cranial sites 6 and 12 months after a systemic relapse. At 3 years, the 34 Group 2 patients had a progression-free survival rate of 33%; control of cranial disease was 52%. Group 2 included 19 patients who had residual cranial (with or without extracranial) disease. The cranial sites showed major (n = 13), minor (n = 2), or no response (n = 4) to RT. Five patients had progression in the cranial RT field at 10-27 months. Group 2 also included 15 patients who had persistent NB in extracranial, but not cranial, sites. Of these 15 patients, 2 relapsed in the irradiated cranial sites and elsewhere at 8 and 14 months. Cranial RT was well tolerated, with no Grade 2 or greater toxicity. Conclusion: Hyperfractionated 21-Gy cranial RT might help control NB and is feasible without significant toxicity in children.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Electron cloud considerations for HIF drivers

Here, we review some previous results on electron-cloud dynamics and accumulation and the impact of electron clouds on ion beam dynamics, and assess these in the context of a magnetic-quadrupole-based heavy-ion fusion driver. We present a new analysis which exploits analytic solution of linearized envelope equations between accelerating gaps to derive a set of mapping equations which we use to extrapolate from previously obtained particle-simulation results for a beam transport system to an HIF driver.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Inductive coupled radio frequency plasma bridge neutralizer

A 13.56 MHz radio frequency plasma bridge neutralizer (rf-PBN) for ion thruster applications as well as ion beam surface processing of insulating materials is presented. The energy for the plasma excitation is inductively coupled into the plasma chamber. Because no components are located inside the plasma, the lifetime of the rf-PBN is expected to be very long. A compact tuning system adapts the input power to the plasma impedance. The electron current may be controlled over a wide range by the rf input power. An electron current of up to 1.6 A has been extracted.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of a radio-frequency ion beam source for fast-ion studies on the large plasma device

A helium ion beam source (23 kV/2.0 A) has been constructed for studying fast-ion physics in the cylindrical magnetized plasma of the large plasma device (LAPD). An inductive RF source produces a 10{sup 19} m{sup -3} density plasma in a ceramic dome. A multi-aperture, rectangular (8 cm x 8 cm) three-grid system extracts the ion beam from the RF plasma. The ion beam is injected at a variety of pitch angles with Alfvenic speeds in the LAPD. The beam current is intense enough to excite magnetic perturbations in the ambient plasma. Measurements of the ion beam profile were made to achieve an optimum beam performance and a reliable source operation was demonstrated on the LAPD.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Heuristic Dynamic Programming for Adaptive Virtual Synchronous Generators

In this paper a neural network heuristic dynamic programing (HDP) is used for optimal control of the virtual inertia-based control of grid connected three-phase inverters. It is shown that the conventional virtual inertia controllers are not suited for non-inductive grids. A neural network-based controller is proposed to adapt to any impedance angle. Applying an adaptive dynamic programming controller instead of a supervised controlled method enables the system to adjust itself to different conditions. The proposed HDP consists of two subnetworks: critic network and action network. These networks can be trained during the same training cycle to decrease the training time. The simulation results confirm that the proposed neural network HDP controller performs better than the traditional direct-fed voltage and/or reactive power controllers in virtual inertia control schemes.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Core Characterization of Bakken Shale from the Bedwell 33-52-1-1H Well, Sheridan County, Montana

The computed tomography (CT) facilities and the Multi-Sensor Core Logger (MSCL) at the National Energy Technology Laboratory (NETL) in Morgantown, West Virginia were used to characterize core of the Bedwell 33-52-1-1H well (API 25-091-21920), a wildcat field in Sheridan County, Montana. The primary impetus of this work is to provide a unique dataset to researchers at universities, national laboratories, geological surveys, and other locations for additional analyses. The resultant datasets are presented in this report and can be accessed from NETL's Energy Data eXchange (EDX) online system using the following link: https://edx.netl.doe.gov/dataset/bedwell-33-52-1-1h-well. The equipment and techniques used to characterize the full core were non-destructive, enabling future examinations and analyses to be performed on these cores. However, none of the equipment used was suitable for direct visualization of the pore space in fine-grained structures such as those found in shales; fractures, discontinuities, and millimeter scale features were readily detectable with the methods tested. Imaging with the NETL medical CT scanner was performed on the entire core. Qualitative analysis of the medical CT images, coupled with X-ray fluorescence (XRF), P-wave, and magnetic susceptibility measurements from the MSCL were useful in identifying zones of interest for more detailed analysis. A selection of samples (Table 1) were cored, sliced, and powdered for additional characterization analyses. These analyses did involve destructive subsampling of the full core at discrete sections, and the results are presented here in the context of the larger core description. Selected sections of the core were removed from the full core for detailed analyses using the following destructive techniques: bulk inductively coupled plasma-optical emission spectroscopy (ICP-OES), isolation of carbon and sulfur, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and higher resolution CT scan with NETL’s micro-CT scanning systems. The ability to quickly identify key areas for more detailed study with higher resolution will save time and resources in future studies. The combination of methods used provides a multi-scale analysis of the core; the resulting macro and micro descriptions are relevant to many subsurface energy related examinations traditionally performed at NETL.

04 OIL SHALES AND TAR SANDS↗

Design Optimization and Measurement Uncertainty of an Electromagnetic Level Sensor for Liquid Metal Reactors

Here, this article describes the design and operation of a prototype mutual inductance level sensor (MILS) and the development and validation of a finite-element analysis (FEA) model describing its behavior. The MILS was designed for use in liquid sodium up to temperatures of 650 °C in the Mechanisms Engineering Test Loop (METL) at Argonne National Laboratory (ANL). Preliminary testing was performed in a room temperature test stand with aluminum acting as an analog for the sodium to better understand sensor performance and provide accurate code validation data. This experimental data, along with material properties found in literature, were used to validate an FEA model in ANSYS Maxwell. The validated ANSYS Maxwell model was used to examine the performance of the MILS in various environments and under various operating conditions. Simulations suggest the following: The MILS will perform adequately in liquid sodium and liquid lead at temperatures up to 650 °C . The temperature dependence of electrical conductivity imposes a temperature dependence on the sensor that requires proper compensation. The MILS signal sensitivity is maximized when mutual inductance between sensor coils is maximized, and sensor geometry should be selected to account for this factor. The operating frequency of the MILS can be optimized and is dependent on process fluid material, operating temperature, and materials/geometry of sensor system. Finally, the use of a stainless-steel isolating thimble does not adversely affect the sensor signal. The primary sources of error for this MILS system are the accuracy of the calibration standard against which the sensor is calibrated, and the temperature dependence of the sensor. This work contains all the necessary details to recreate the FEA model and results. This model can be used to optimize the performance of a MILS in any operating environment to read any electrically conductive working fluid.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Fabrication Development for SPT-SLIM, a Superconducting Spectrometer for Line Intensity Mapping

Line Intensity Mapping (LIM) is a new observational technique that uses low-resolution observations of line emission to efficiently trace the large-scale structure of the Universe out to high redshift. Common mm/sub-mm emission lines are accessible from ground-based observatories, and the requirements on the detectors for LIM at mm-wavelengths are well matched to the capabilities of large-format arrays of superconducting sensors. We describe the development of an R = lambda/Delta lambda = 300 on-chip superconducting filter-bank spectrometer covering the 120-180 GHz band for future mm-LIM experiments, focusing on SPT-SLIM, a pathfinder LIM instrument for the South Pole Telescope. Radiation is coupled from the telescope optical system to the spectrometer chip via an array of feedhorn-coupled orthomode transducers. Superconducting microstrip transmission lines then carry the signal to an array of channelizing half-wavelength resonators, and the output of each spectral channel is sensed by a lumped element kinetic inductance detector (leKID). Key areas of development include incorporating new low-loss dielectrics to improve both the achievable spectral resolution and optical efficiency and development of a robust fabrication process to create a galvanic connection between ultra-pure superconducting thin-films to realize multi-material (hybrid) leKIDs. We provide an overview of the spectrometer design, fabrication process, and prototype devices.

microstrip resonators↗

Pseudo-spark switch (PSS) characteristics under different operation conditions

The present paper concentrates on the characteristics of the pseudospark switch (PSS) designed in a previous work. The special characteristics of PSS make it a replacement for other high voltage switches such as thyratrons and ordinary high-pressure spark gaps. PSS is characterized by short rise time and small jitter time. The pseudo park chamber consists of two hollow cylindrical electrodes made of a stainless steel material (type 306L) separated by an insulator. The insulator used in our design is a glazed ceramic 70 mm in diameter and 3.5 mm in thickness. A PSS with an anode voltage of 29.2 kV, and a current of 3.6 kA and 11 ns rise time was achieved and used successfully at a repetition rate of about 2.2 kHz. A simple trigger circuit designed, built, and used effectively reaching more than 1.56 kV trigger pulse which is sufficient to ignite the argon gas inside the cathode to cause a breakdown. A non-inductive dummy load is designed to be a new technique to find the accurate value of the PSS inductance. A jitter time of ±10 ns pulses is observed to occur in a reliable manner for more than 6 h of continuous operation. In this research, the important parameters of this switch like rise time, peak current, and anode voltage were studied at various values of charging capacitance. The lifetime of this system is depending on the kind of the electrode material and on the type of insulation material in the main gap of the pseudospark switch.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗