Search NASA⌕ Search

SEARCH · Search NASA

Results for “LIGNITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Rehabilitation of semi-arid coal mine spoil bank soils with mine residues and farm organic by-products

A method of rehabilitating coal mine soils was studied under the conditions of a semi-arid climate, lack of topsoil but availability of farm by-products in NE Spain. The objectives of the research were to assess a new method in order to achieve a suitable substrate for the establishment of native vegetation, to evaluate environmental impacts associated with the reclamation process, and to determine the time necessary to integrate the treated area into the surrounding environment. Eight plots (10 x 35 m{sup 2}) were established in September 1997. Substrate combinations of two types of mine spoil (coal dust and coarse-sized material), two levels of pig slurry (39 and 94 Mg ha{sup -1}dry-wt), and cereal straw (0 and 15 Mg ha{sup -1}) were applied. Monitoring of select physical and chemical soil properties and vegetation characteristics was performed from 1997 until 2005. The bulk density and the saturated hydraulic conductivity measured did not limit plant development and water availability. Initial substrate salinity (1.37 S m{sup -1}) decreased with time and in the long term did not limit plant colonization to salinity-adapted species. Initial nitrate concentration was 298 mg kg{sup -1}, but was reduced significantly to acceptable values in 3 years (55 mg kg{sup -1}) and the measured pH (7.6) was maintained at the level of initial spoil values. Vegetation cover reached up to 90%. In the treated area, spontaneous vegetation cover (15 to 70%) colonized the nonsown areas widely. In the medium term, vegetation cover tended to be higher in plots with a thicker layer of coal dust material and the higher slurry rate. Soil rehabilitation and environmental reintegration, taking into account soil and vegetation indicators, was possible in the studied area with low cost inputs using residual materials from mining activities and animal husbandry by-products.

01 COAL, LIGNITE, AND PEAT↗

Optimizing conditions for ultrasound extraction of fullerenes from coal matrices

Conditions for ultrasound toluene extraction of synthetic C60 added to powdered bituminous coal were tested. High-performance liquid chromatography (HPLC) was used to determine the fullerene content in the obtained extracts. The results indicated a possible negative effect of sample demineralization (HCl/HF) and N{sub 2} purging on the extraction yield of C60. On the contrary, a 30% yield increase was registered when the coal was pre-extracted with pentane or pentane/toluene. The best conditions for C60 recovery in the investigated mixtures are 30min of sonication at 280-285K. The effects of sample filtration, sequential extraction, ultrasound bath power and treatments of C60 solution alone are also discussed.

01 COAL, LIGNITE, AND PEAT↗

Development of catalyst free carbon nanotubes from coal and waste plastics

DC-Arc technique has been used to synthesize carbon nanotubes from super clean coal, chemically cleaned coal, original coal and waste plastics instead of using high purity graphite in the presence of metal catalysts. The results obtained are compared in terms of yield, purity and type of carbon nanotubes produced from different types of raw material used. In the present study different types of raw materials have been prepared i.e. chemically cleaned coal and super clean coal, and the carbon nanotubes have been synthesized by DC Arc discharge method. Taking in account the present need of utilizing coal as a cheaper raw material for bulk production of carbon nanotubes and utilization of waste plastics (which itself is a potential environmental threat) for production of such an advance material the present work was undertaken. Since the process does not involve presence of any kind of metal catalyst, it avoids the cost intensive process of removal of these metal particles. The residual coal obtained after refining has major fuel potential and can be utilized for various purposes.

01 COAL, LIGNITE, AND PEAT↗

Effects of minor components in carbon dioxide capture using polymeric gas separation membranes

The capture of carbon dioxide by membrane gas separation has been identified as one potential solution to reduce greenhouse gas emissions. In particular, the application of membranes to CO{sub 2} capture from both pre- and post-combustion strategies is of interest. For membrane technology to become commercially viable in CO{sub 2} capture, a number of factors need to be overcome, one being the role of minor components in the process on membrane performance. This review considers the effects of minor components in both pre- and post-combustion use of polymeric membranes for CO{sub 2} capture. In particular, gases such as SOx, NOx, CO, H{sub 2}S, NH3, as well as condensable water and hydrocarbons are reviewed in terms of their permeability through polymeric membranes relative to CO{sub 2}, as well as their plasticization and aging effects on membrane separation performance. A major conclusion of the review is that while many minor components can affect performance both through competitive sorption and plasticization, much remains unknown. This limits the selection process for membranes in this application.

01 COAL, LIGNITE, AND PEAT↗

Coal-gold agglomeration: an alternative separation process in gold recovery

Considering the increasing environmental concerns and the potential for small gold deposits to be exploited in the future, the uses of environmentally friendly processes are essential. Recent developments point to the potential for greatly increased plant performance through a separation process that combines the cyanide and flotation processes. In addition, this kind of alternative treatment processes to the traditional gold recovery processes may reduce the environmental risks of present small-scale gold mining. Gold recovery processes that applied to different types of gold bearing ore deposits show that the type of deposits plays an important role for the selection of mineral processing technologies in the production of gold and other precious metals. In the last 25 years, different alternative processes have been investigated on gold deposits located in areas where environmental issues are a great concern. In 1988, gold particles were first recovered by successful pilot trial of coal-gold agglomeration (CGA) process in Australia. The current paper reviews the importance of CGA in the production of gold ore and identifies areas for further development work.

01 COAL, LIGNITE, AND PEAT↗

Ergonomics - Using Ergonomics to Enhance Safe Production at a Surface Coal Mine - A Case Study with Powder Crews

Job tasks that involve exposure to work-related musculoskeletal disorder (WMSD) risk factors may impact both the risk of injury and production downtime. Common WMSD risks factors associated with mining tasks include forceful exertions, awkward postures, repetitive motion, jolting and jarring, forceful gripping, contact stress, and whole body and segmental vibration. Mining environments that expose workers to temperature/humidity extremes, windy conditions, and slippery and uneven walking surfaces also contribute to injury risk. National Institute for Occupational Safety and Health (NIOSH) researchers worked with powder crew members from the Bridger Coal Company to identify and rank routine work tasks based on perceived exposure to WMSD risk factors. This article presents the process followed to identify tasks that workers believed involved the greatest exposure to risk factors and discusses risk reduction strategies. Specifically, the proposed prill truck design changes addressed cab ingress/egress, loading blast holes, and access to the upper deck of the prill truck.

01 COAL, LIGNITE, AND PEAT↗

Characterization of a Middle Distillate Oil from a Coal hydroliquefaction Plant

In this article, a middle distillate oil obtained from a coal hydroliquefaction pilot plant was characterized by modern analytical instruments. First, using {sup 1}H and {sup 13}C nuclear magnetic resonance, the distribution of hydrogen and carbon atoms were obtained, and the presence of configurations such as long aliphatic carbon chains, alkyl-substituted aromatic ring, and partially hydrogenated aromatics in the middle distillate oil was found. Then the oil was separated into three fractions: saturates, aromatics, and polars by neutral silica gel liquid chromatography, and the detailed compositions of saturates and aromatics were respectively analyzed by gas chromatography-mass spectrometry. The results show that the aromatics fraction is the most abundant one in this oil, but they are not normal aromatics and mainly consist of dicyclic-, tricyclic-, and tetracyclic-partially hydrogenated aromatics with carbon atom numbers from C10-C21, such as tetralin, alkyl-substituted tetralin, hydrophenanthrene, hydroanthracene, hydropyrene, and so on. Saturates mainly comprise n-C12-C27 alkanes. These results are of significance for the further processing and marketing of this oil.

01 COAL, LIGNITE, AND PEAT↗

The Influence of Surfactants on the Zeta Potential of Coals

The surface of three different kinds of coal was modified by three surfactants (cationic, anionic, and non-ionic). Changes on coal surface were examined by the zeta potential technique. The influence of the dispersion of pH, concentration of surfactants, and contact time were investigated. The most significant change in zeta potential resulting from adding surfactants was observed in activated coal (hydrophobic surface, largest BET surface area). Adding the cationic surfactant led to an increase of the zeta potential, contrary to measuring done in water. The anionic surfactant decreased the value of the zeta potential; however, this change was not too remarkable. The results proved that even a very low concentration of the cationic surfactant (0.01 mmol/L) causes a remarkable change of the zeta potential. On the other hand, a similar effect was observed until the concentration of the anionic surfactant reached about 10 mmol/L. The mechanism of binding surfactants is not simple, but preferential hydrophobic interactions were discovered.

01 COAL, LIGNITE, AND PEAT↗

CO{sub 2}-gasification reactivity of different carbonaceous materials at elevated temperatures

At the atmospheric pressure and at the temperatures between 1,223 and 1,673 K, the CO{sub 2} gasification reactivity of seven different carbonaceous materials comprising coal tar pitch coke, petroleum coke, natural graphite, carbon black and three coal chars was investigated by using thermogravimetric analysis. Their crystalline structures were analyzed by X-ray diffraction (XRD). It is found that the reactivity of the chars, pitch coke and petroleum coke produced from liquid phase carbonization, is several times poorer than that of the coal chars produced from solid phase carbonization and even lower than that of natural graphite. At the same time, it is obtained that under the condition of the chemical reaction control, the apparent activation energies of the former are in the range of 135.82-174.92 kJ/mol, while those of the latter are between 89.95 kJ/mol and 110.05 kJ/mol. Besides, the reactivity of the sample has a certain correlation with the crystalline structure of the sample, i.e., the larger the fraction of the relatively better crystalline structure is, the poorer the reactivity of the sample is.

01 COAL, LIGNITE, AND PEAT↗

Thermodynamic study on the formation of acetylene during coal pyrolysis in the arc plasma jet

Based on the principle of minimizing the Gibbs free energy, the composition of C-H-O-N-S equilibrium system about acetylene formation during the pyrolysis in arc plasma jet for four kinds of different rank-ordered coals such as Datong, Xianfeng, Yangcheng, and Luan was analyzed and calculated. The results indicated that hydrogen, as the reactive atmosphere, was beneficial to the acetylene formation. The coal ranks and the hydrogen, oxygen, nitrogen, and sulfur in coal all could obviously affect the acetylene yield. The mole fraction of acetylene is the maximum when the ratio value of atom H/C was 2. The content of oxygen was related to the acetylene yield, but it does not compete with CO formation. These agreed with the experimental results, and they could help to select the coal type for the production of acetylene through plasma pyrolysis process.

01 COAL, LIGNITE, AND PEAT↗

Numerical study on convection diffusion for gasification agent in underground coal gasification (UCG). Part II: determination of model parameters and results analysis

The determination methods of the major model parameters are explained in this article, and the upstream weighted multi-cell balance method is adopted to solve the numerical models established. The author also analyzes and discusses the simulated calculation results, which show that, except for very few points in the loosening zone, where the relative calculation error is comparatively high resulting from the low oxygen concentration, the relative calculation error of other points falls between 8% and 19%. Therefore, the calculation value and the experiment value take on a good conformity. The simulated results indicate that the calculation value of the oxygen concentration is a little bit lower than the experiment one. On top of that, with the prolonging of gasification time, in a high temperature zone the change gradient of oxygen concentration for experimental value is bigger than that of the calculation value. The oxygen concentration is in direct proportion to its distance from the flame working face, i.e., the longer its distance is, the higher the oxygen concentration is; otherwise, the lower the oxygen concentration is.

01 COAL, LIGNITE, AND PEAT↗

Effect of microwave radiation on coal flotation

Most low-rank coals are high in moisture and acid functional groups, therefore showing poor floatability. Drying, which removes the water molecules trapped in the pores and adsorbed at the surface of coal, decreases the hydrophilic character and improves the floatability. Microwave heating, whose simplest application is drying, was applied at 0.9 kW power level for 60 sec exposure time in the experiments to decrease the moisture content of coal in order to enhance the hydrophobicity. The flotation tests of microwave-treated coal by using heptanol and octanol lead to a higher flotation yield and ash removal than original coal.

01 COAL, LIGNITE, AND PEAT↗

Chemical exergies of some coals in Turkey

Exergy analysis is a general method for efficiency analysis of systems and processes. The use of the exergy concept and the analysis of ultimate efficiencies of processes is more or less still limited to the academic world. There are several reasons why its industrial use is still limited. To overcome some of the difficulties in industrial applications of energy analysis, it has made use of exergy analysis. The chemical exergy of a substance is the maximum work that can be obtained from it by taking it to chemical equilibrium with the reference environment at a constant temperature and pressure. The first law analysis gives only the quantity of energy, while the second law defines the quality of energy also. The projected increase in coal utilization in power plants makes it desirable to evaluate the energy content of coal both quantitatively and qualitatively. In the present study, the chemical exergies of some coals of good quality in Turkey were calculated with the BASIC program by using second law analysis and the results were given as tabulated.

01 COAL, LIGNITE, AND PEAT↗

Studies on the production of ultra-clean coal by alkali-acid leaching of low-grade coals

The use of low-grade coal in thermal power stations is leading to environmental pollution due to the generation of large amounts of fly ash, bottom ash, and CO{sub 2} besides other pollutants. It is therefore important to clean the coal before using it in thermal power stations, steel plants, or cement industries etc. Physical beneficiation of coal results in only limited cleaning of coal. The increasing environmental pollution problems from the use of coal have led to the development of clean coal technologies. In fact, the clean use of coal requires the cleaning of coal to ultra low ash contents, keeping environmental norms and problems in view and the ever-growing need to increase the efficiency of coal-based power generation. Therefore this requires the adaptation of chemical cleaning techniques for cleaning the coal to obtain ultra clean coal having ultra low ash contents. Presently the reaction conditions for chemical demineralization of low-grade coal using 20% aq NaOH treatment followed by 10% H{sub 2}SO{sub 4} leaching under reflux conditions have been optimized. In order to reduce the concentration of alkali and acid used in this process of chemical demineralization of low-grade coals, stepwise, i.e., three step process of chemical demineralization of coal using 1% or 5% aq NaOH treatment followed by 1% or 5% H{sub 2}SO{sub 4} leaching has been developed, which has shown good results in demineralization of low-grade coals. In order to conserve energy, the alkali-acid leaching of coal was also carried out at room temperature, which gave good results.

01 COAL, LIGNITE, AND PEAT↗

Non-isothermal kinetic studies of co-combustion and co-cracking of coal and plastic blends using thermogravimetric analysis

The kinetics of co-combustion/co-cracking of Topa coal with polystyrene, poly(vinyl chloride), and bakelite have been studied by theromogravimetric analysis at a linear heating rate of 20C/min in a stream of air for combustion and in nitrogen for cracking with a flow rate of 20 cm{sup 3}/min up to the temperature of 900C under non-isothermal conditions. The order of reaction and overall activation energy of the reactions have been calculated. These studies may help in synergistic production of value-added organic compounds and spatiality chemicals from coal and plastics.

01 COAL, LIGNITE, AND PEAT↗

Moessbauer study at room temperature of zinc ferrite as sorbent for hot coal gas desulphurization

Abstract: The method of using Moessbauer spectroscopy at room temperature was applied to assign the iron sites in one fresh zinc ferrite sample ZF with (1:1) concentration of their component oxides and calcined at 900C as well as its sulfurization derivatives at 750C in different coal gas of composition 0.5% H{sub 2}S + 0.5% H{sub 2}; 0.5% H{sub 2}S + 10% H{sub 2}; 0.5% H{sub 2}S + 25% H{sub 2}, and 0.5% H{sub 2}S + 10% H{sub 2}O (v). The most important iron phase obtained in the sulfurized samples, was pyrrhotite, Fe1-xS that exhibit three well different ional sextets. From the peak area and the associated magnetic hyperfine fields, the average magnetic field was calculated and indicates lowering in the number of iron vacancies whereas x is close to 0.

01 COAL, LIGNITE, AND PEAT↗

Investigation of coal stockpiles of Tuncbilek thermal power plant with respect to time under atmospheric conditions

Thermal power plants have delayed the coal that they will use at stockpiles mandatorily. If these coal stockpiles remain at the stockyards over a certain period of time, a spontaneous combustion can be started itself. Coal stocks under combustion threat can cost too much economically to coal companies. Therefore, it is important to take some precautions for saving the stockpiles from the spontaneous combustion. In this research a coal stockpile at Tuncbilek Thermal Power Plant which was formed in 5 m wide, 10 m long, and 3 m height with a weight of 120 tons to observe internal temperature changes with respect to time under normal atmospheric conditions. Later, internal temperature measurements were obtained at 20 points distributed all over two layers in the stockpile. The parameters, such as air temperature, humidity, atmosphere pressure, wind speed and direction, which are effective on the stockpiles, were measured and used to obtain the graphs of stockpiles' internal temperature.

01 COAL, LIGNITE, AND PEAT↗

Underground coal gasification field experiment in the high-dipping coal seams

In this article the experimental conditions and process of the underground gasification in the Woniushan Mine, Xuzhou, Jiangsu Province are introduced, and the experimental results are analyzed. By adopting the new method of long-channel, big-section, and two-stage underground coal gasification, the daily gas production reaches about 36,000 m{sup 3}, with the maximum output of 103,700 m{sup 3}. The daily average heating value of air gas is 5.04 MJ/m{sup 3}, with 13.57 MJ/m{sup 3} for water gas. In combustible compositions of water gas, H{sub 2} contents stand at over 50%, with both CO and CH{sub 4} contents over 6%. Experimental results show that the counter gasification can form new temperature conditions and increase the gasification efficiency of coal seams.

01 COAL, LIGNITE, AND PEAT↗