Search NASA⌕ Search

SEARCH · Search NASA

Results for “MINORITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Surface photovoltage method extended to silicon solar cell junction

The conventional surface photovoltage (SPV) method is extended to the measurement of the minority carrier diffusion length in diffused semiconductor junctions of the type used in a silicon solar cell. The minority carrier diffusion values obtained by the SPV method agree well with those obtained by the X-ray method. Agreement within experimental error is also obtained between the minority carrier diffusion lengths in solar cell diffusion junctions and in the same materials with n-regions removed by etching, when the SPV method was used in the measurements.

Wang, E. Y.↗

Mother, Earth, Father Sky Symposium

A conference was held in which minority aerospace scientists and engineers interacted with the minority community, particularly at the junior high, high school, and college levels. There were two presentations in the biological sciences, two in the physical and environmental sciences, seven in engineering and computer sciences, and nine in aerospace science and engineering. Aerospace technology careers and aerospace activities were discussed as to how they are relevant to minorities and women.

Bowman, B.↗

Volumetric direct nuclear pumped laser

A volumetric direct nuclear pumped laser was developed in which the gas is a mixture of He-3 and a minority gas from the group of argon, krypton, xenon, chlorine and fluorine. The mixture of He-3 and the minority gas produces lasing with a minority gas concentration of from 0.01 to 10 percent argon, 1 percent krypton, 0.01 to 5 percent xenon and small concentrations of chlorine or fluorine.

Jalufka, N. W.↗

The discovery and orbit of /2060/ Chiron

'Slow-moving Object Kowal' was discovered as an asteroidal object of photographic magnitude about 18 on photographic plates made on October 18 and 19, 1977 with the 122-cm Schmidt telescope at Palomar Observatory. It was determined that the object was located between 14 and 17 AU from the earth in a low-inclination, near-circular orbit. Examination of subsequent plates and earlier observations of the area allowed a more exact calculation of the orbital elements, which suggest the object to be in 3:5 resonance with Saturn at a perihelion of 8.5 AU. The object's orbital behavior suggests that of an inactive comet perturbed by Saturn from a previous orbit, however its magnitude is uncharacteristically large for a comet. It is proposed that object Kowal was once an ordinary minor planet that was deflected into its present orbit by collisions with other minor planets and a series of encounters with Jupiter and Saturn. The object has received the minor planet number (2060) and the name of Chiron has been proposed.

Kowal, C. T.↗

Neutral thermospheric composition and thermal structure

A review of the published experimental works of the past four years is presented. Since 1975, satellite and ground based programs produced new data on the composition and structure of the thermosphere, including the first extensive measurements of a number of minor constituents. The new data were incorporated in a number of semiempirical models which provided an increasingly accurate picture of thermospheric variations. Empirical modelling is considered, followed by solar activity variations, daily variations, magnetic storm variations, measurements of molecular oxygen and minor species, and miscellaneous temperature and density determinations. The concepts of global circulation patterns driven by solar radiation, magnetospheric energy, and momentum sources, and wave sources in the lower atmosphere, and the accompanying redistribution of minor species are outlined.

Hedin, A. E.↗

Preparation of monotectic alloys having a controlled microstructure by directional solidification under dopant-induced interface breakdown

Monotectic alloys having aligned spherical particles of rods of the minor component dispersed in a matrix of the major component are prepared by forming a melt containing predetermined amounts of the major and minor components of a chosen monotectic system, providing in the melt a dopant capable of breaking down the liquid solid interface for the chosen alloy, and directionally solidfying the melt at a selected temperature gradient and a selected rate of movement of the liquid-solid interface (growth rate). Shaping of the minor component into spheres or rods and the spacing between them are controlled by the amount of dopant and the temperature gradient and growth rate values. Specific alloy systems include Al Bi, Al Pb and Zn Bi, using a transition element such as iron.

Parr, R. A.↗

Flight service evaluation of Kevlar-49 epoxy composite panels in wide-bodied commercial transport aircraft

Kevlar-49 fairing panels, installed as flight service components on three l-1011's, were inspected after 8 years service. The fairings had accumulated a total of 62,000 hours, with one ship set having 20,850 hours service. Kevlar-49 components were found to be performing satisfactorily in service with no major problems. The only defects noted were minor impact damage, a few minor disbonds and a minor degree of fastener hole fraying and elongation. The service history to date indicates that Kevlar-49 epoxy composite materials have satisfactory service characteristics for use in aircraft secondary structures.

Stone, R. H.↗

The effects of C, P, and S on trace element partitioning during solidification in Fe-Ni alloys

Trace and minor element distributions in the iron meteorites are generally ascribed to partitioning during solidification of the parent body core or to partial melting within the parent body. A model involving fractional crystallization is considered. The model cannot account for differences between the measured values for the slopes on the log Ir-log Ni plots and the slopes predicted using experimentally determined distribution coefficients obtained in an investigation conducted by Goldstein and Friel (1978). The model has also other weaknesses. Part of the answer concerning the existing problems was provided by Narayan and Goldstein (1981, 1982). The present investigation is concerned with a further clarification of the effect of the minor elements P, S, and C on the distribution behavior of trace elements. Attention is given to measurements of the distribution coefficients for various elements (Ir, Ge, Ga, Au, Cu, Cr) in the presence of these minor elements.

Willis, J.↗

Flight service evaluation of Kevlar-49 epoxy composite panels in wide-bodies commercial transport aircraft

Kevlar-49 fairing panels, installed as flight service components on three L-1011s, were inspected after 9 years of service. There are six Kevlar-49 panels on each aircraft: a left hand and right hand set of a wing body sandwich fairing; a solid laminate under wing fillet panel; and a 422 K (300 F) service aft engine fairing. The fairings have accumulated a total of 70,000 hours, with one ship set having over 24,000 hours service. The Kevlar-49 components were found to be performing satisfactorily in service with no major problems, or any condition requiring corrective action. The only defects noted were minor impact damage, a few minor disbonds and a minor degree of fastener hole fraying and elongation. These are for the most part comparable to damage noted on fiberglass fairings. The service history to date indicates that Kevlar-49 epoxy composite materials have satisfactory service characteristics for use in aircraft secondary structure.

Stone, R. H.↗

Influence of oxygen on defect production in electron-irradiated, boron-doped silicon

Deep level transient spectroscopy (DLTS) measurements were made on float-zone and crucible-grown, boron-doped silicon irradiated with 1-MeV electrons. The minority carrier trap attributed to a boron-related state, was not seen in low-resistivity, float-zone silicon. However, a new majority carrier trap was observed in these samples. In the case of more lightly doped material the minority carrier trap was present, and its introduction rate was lower in float-zone than in crucible-grown silicon. For 1- and 10-ohm-cm float-zone material that was oxidized during processing, the introduction rates for this trap were comparable to those for crucible-grown silicon. This behavior indicates that the minority carrier trap involves oxygen and that it may be due to a boron-oxygen complex. The majority carrier trap seen in heavily doped, float-zone silicon may also involve boron but not oxygen. Observed trap concentrations suggest that oxygen content in the regions examined by DLTS is affected by processing techniques. Other differences were observed in defect production and annealing behavior of electron-irradiated, float-zone and crucible-grown silicon.

Deangelis, H. M.↗

Flight service evaluation of Kevlar-49 epoxy composite panels in wide-bodied commercial transport aircraft

Kevlar-49 fairing panels, installed as flight service components on three L-1011s, were inspected after 10 years of service. There are six Kevlar-49 panels on each aircraft: a left-hand and right-hand set of a wing-body sandwich fairing; a solid laminate under-wing fillet panel; and a 422 K (300 F) service aft engine fairing. The three L-1011s include one each in service with Eastern, Air Canada, and TWA. The fairings have accumulated a total of 79,568 hours, with one ship set having nearly 28,000 hours service. The inspections were conducted at the airlines' major maintenance bases with the participation of Lockheed Engineering. The Kevlar-49 components were found to be performing satisfactorily in service with no major problems, or any condition requiring corrective action. The only defects noted were minor impact damage, a few minor disbonds and a minor degree of fastener hole fraying and elongation. These are for the most part comparable to damage noted on fiberglass fairings. The service history obtained in this program indicates that Kevlar-49 epoxy composite materials have satisfactory service characteristics for use in aircraft secondary structure.

Stone, R. H.↗

NASA Ames summary high school apprenticeship research program, 1983 research papers

Engineering enrollments are rising in universities; however, the graduate engineer shortage continues. Particularly, women and minorities will be underrepresented for years to come. As one means of solving this shortage, Federal agencies facing future scientific and technological challenges were asked to participate in the Summer High School Apprenticeship Research Program (SHARP). This program was created 4 years ago to provide an engineering experience for gifted female and minority high school students at an age when they could still make career and education decisions. The SHARP Program is designed for high school juniors (women and minorities) who are U.S. citizens, are 16 years old, and who have unusually high promise in mathematics and science through outstanding academic performance in high school. Students who are accepted into this summer program will earn as they learn by working 8 hours a day in a 5-day work week. This work-study program features weekly field trips, lectures and written reports, and job experience related to the student's career interests.

Powell, P.↗

Process Research on Polycrystalline Silicon Material (PROPSM)

Results of hydrogen-passivated polycrystalline silicon solar cells are summarized. Very small grain or short minority-carrier diffusion length silicon was used. Hydrogenated solar cells fabricated from this material appear to have effective minority-carrier diffusion lengths that are still not very long, as shown by the open-circuit voltages of passivated cells that are still significantly less than those of single-crystal solar cells. The short-circuit current of solar cells fabricated from large-grain cast polycrystalline silicon is nearly equivalent to that of single-crystal cells, which indicates long bulk minority-carrier diffusion length. However, the open-circuit voltage, which is sensitive to grain boundary recombination, is sometimes 20 to 40 mV less. The goal was to minimize variations in open-circuit voltage and fill-factor caused by defects by passivating these defects using a hydrogenation process. Treatments with molecular hydrogen showed no effect on large-grain cast polycrystaline silicon solar cells.

Culik, J. S.↗

Oxygen and carbon in silicon

The properties of the early transistors were determined by the minority-carrier lifetime, as is the silicon photovoltaic solar cell. Most of the devices on the modern integrated circuits are majority carrier devices, in part to avoid this lifetime dependence. The micro-electronics industry typically starts with wafers with a minority-carrier lifetime of 1000 micro-seconds, but during device fabrication this lifetime is reduced to beflow 1 micro-second, in spite of extraordinary cleanliness and precautions. Process-induced defects (PID) include point defects, defect complexes, line defects, and bulk precipitates. One of the aspects that needs to be better understood is the nature of minority carrier recombination at line defects and at precipitates. Some of the PIDs are known to be related to the fast-diffusers of the iron-series transition elements. One of the common techniques of dealing with these elements is intrinsic gettering by the oxygen precipitates. But even in the gettered state, there may be a residual effect on the lifetime. Oxygen is an almost ubiquitous impurity in silicon and plays an important role in both integrated circuits and solar cells. The isolated oxygen interstitial is electrically inactive, but in its various aggregated forms it has a variety of electrical activities. The agglomeration and precipitation of oxygen, including impurity gettering and the complicating role of carbon, is discussed.

Corbett, J. W.↗

Surface effects on phase distributions of a fast-quenched miscibility gap type system - Succinonitrile-water

If a binary homogeneous melt is cooled into an immiscible region, the newly formed second phase will generally have a density different from the parent phase, and will separate readily by sedimentation. Observation of solidification processes in microgravity indicates that outside of sedimentation, at least two other important effets can separate the phases: (1) preferential wetting, and (2) thermal migration of second-phase droplets due to interfacial tension gradients. The latter effect would drive the minority phase along the thermal gradient toward the hottest part (assuming the interfacial tension decreases with increasing temperature), which is usually away from the crucible wall. On the other hand, if the minority phase preferentially wets the crucible, a minority phase layer which thickens as initial solution compositions approach critical, will form adjacent to the solid surface and remain in the coldest region of the ingot. This study presents compelling preliminary evidence that these two effects do exist and that they compete with one another. However, the temperature dependence of preferential wetting below T(c) for the current system of study is, as yet, undetermined. These effects are sensitive to the initial concentration of a hypermonotectic solution cooling through a miscibility gap.

Frazier, D. O.↗

Transit time and charge storage measurements in heavily doped emitters

A first direct measurement of the minority-carrier transit time in a transparent heavily doped emitter layer is reported. The value was obtained by a high-frequency conductance method recently developed and used for low-doped Si. The transit time coupled with the steady-state current enables the determination of the quasi-static charge stored in the emitter and the quasi-static emitter capacitance. Using a transport model, from the measured transit time, the value for the minority-carrier diffusion coefficient and mobility is estimated. The measurements were done using a heavily doped emitter of the Si p(+)-n-p bipolar transistor. The new result indicates that the position-averaged minority-carrier diffusion coefficients may be much smaller than the corresponding majority-carrier values for emitters having a concentration ranging from about 3 x 10 to the 19th per cu cm to 10 to the 20th per cu cm.

Neugroschel, A.↗

The trace element chemistry of CaS in enstatite chondrites and some implications regarding its origin

The trace element distribution in oldhamite (CaS) extracted from enstatite chondrites was determined by INAA. Prior to extraction, the petrologic setting of the grains was studied microscopically, and their minor element contents determined by microprobe analysis; samples that displayed a wide range of minor element contents were selected for detailed elementary analysis. Those samples of CaS suspected to be more primitive on the basis of their minor element and petrologic siting contain the entire inventory of the host meteorite's light REE (LREE) and Eu, plus 30-50 percent of the heavy-REE inventory. In less primitive samples, the LREE are less enriched although Eu remains highly concentrated. Several other elements, including lithophiles and chalcophiles, are most enriched in the most primitive CaS. It is suggested that oldhamite played a key role in the redistribution of these elements during the metamorphism and evolution of enstatite-rich material.

Larimer, John W.↗

Origin and evolution of the ureilite parent magmas - Multi-stage igneous activity on a large parent body

The minor-element/major-element trends among the ureilites were investigated using electron microprobe data on olivine and pigeonite cores in eight low-shock ureilites. The results show well-defined correlations between Fe/X (where X is one of the minor elements Mn, Cr, Ca, Al, Ti, P, or Ni) and Fe/Mg ratios. For the lithophile minor elements, these trends are linear, with positive slope, and pass through or near the origin, indicating various degrees of FeO reduction of the parent magmas. The trends shown by P and Ni are consistent with this interpretation and require, in addition, equilibrium crystallization of 20-27 mole pct metal. A model is proposed for generation and crystallization of ureilite parent magmas, which predicts that the ureilite parent body had a differentiated crust, did not have a core, and was at least 235 km in radius.

Goodrich, Cyrena Anne↗