Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mathematical models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

A study of stiffness, residual strength and fatigue life relationships for composite laminates

Qualitative and quantitative exploration of the relationship between stiffness, strength, fatigue life, residual strength, and damage of unnotched, graphite/epoxy laminates subjected to tension loading. Clarification of the mechanics of the tension loading is intended to explain previous contradictory observations and hypotheses; to develop a simple procedure to anticipate strength, fatigue life, and stiffness changes; and to provide reasons for the study of more complex cases of compression, notches, and spectrum fatigue loading. Mathematical models are developed based upon analysis of the damage states. Mathematical models were based on laminate analysis, free body type modeling or a strain energy release rate. Enough understanding of the tension loaded case is developed to allow development of a proposed, simple procedure for calculating strain to failure, stiffness, strength, data scatter, and shape of the stress-life curve for unnotched laminates subjected to tension load.

Ryder, J. T.↗

High-Efficiency Microwave Power Amplifier

A high-efficiency power amplifier that operates in the S band (frequencies of the order of a few gigahertz) utilizes transistors operating under class-D bias and excitation conditions. Class-D operation has been utilized at lower frequencies, but, until now, has not been exploited in the S band. Nominally, in class D operation, a transistor is switched rapidly between "on" and "off" states so that at any given instant, it sustains either high current or high voltage, but not both at the same time. In the ideal case of zero "on" resistance, infinite "off" resistance, zero inductance and capacitance, and perfect switching, the output signal would be a perfect square wave. Relative to the traditional classes A, B, and C of amplifier operation, class D offers the potential to achieve greater power efficiency. In addition, relative to class-A amplifiers, class-D amplifiers are less likely to go into oscillation. In order to design this amplifier, it was necessary to derive mathematical models of microwave power transistors for incorporation into a larger mathematical model for computational simulation of the operation of a class-D microwave amplifier. The design incorporates state-of-the-art switching techniques applicable only in the microwave frequency range. Another major novel feature is a transmission-line power splitter/combiner designed with the help of phasing techniques to enable an approximation of a square-wave signal (which is inherently a wideband signal) to propagate through what would, if designed in a more traditional manner, behave as a more severely band-limited device (see figure). The amplifier includes an input, a driver, and a final stage. Each stage contains a pair of GaAs-based field-effect transistors biased in class D. The input signal can range from -10 to +10 dBm into a 50-ohm load. The table summarizes the performances of the three stages

Sims, Williams H.↗

Pyomo

Pyomo supports the formulation and analysis of mathematical models for complex optimization applications. This capability is commonly associated with algebraic modeling languages (AMLs), which support the description and analysis of mathematical models with a high-level language. Although most AMLs are implemented in custom modeling languages, Pyomo's modeling objects are embedded within Python, a full-featured high-level programming language that contains a rich set of supporting libraries.

Source record↗

Numerical Analysis of Liquid Metal MHD Flow and Heat Transfer for Open-Surface Li Divertor in FNSF

Within the ongoing U.S.-based program on the development of liquid metal plasma-facing components, numerical simulations and analyses are performed to address the feasibility of the open-surface Li divertor. In the previous scoping studies (Smolentsev, 2021), heat-removal capabilities of the divertor were assessed using a simplified flow model for a slug-type velocity profile and constant flow thickness. Here, new analyses take into account forces acting on the flowing Li layer. Three reduced-order mathematical models are applied under the conditions of the U.S. Fusion Nuclear Science Facility (FNSF) to access magnetohydrodynamic (MHD) flow development effects, velocity distribution, and surface waves: 1) fully developed MHD flow; 2) quasi-2-D developing MHD flow; and 3) multiphase MHD flow. The obtained results for MHD flows and the surface heat flux computed with the plasma code scrape-off layer plasma simulation for ITER (SOLPS-ITER) are then used as input data to compute the temperature distribution in the divertor by solving the convection–diffusion energy equation.

Smolentsev, Sergey↗

Chaotic dynamics of flexible Euler-Bernoulli beams

Mathematical modeling and analysis of spatio-temporal chaotic dynamics of flexible simple and curved Euler-Bernoulli beams are carried out. The Kármán-type geometric non-linearity is considered. Algorithms reducing partial differential equations which govern the dynamics of studied objects and associated boundary value problems are reduced to the Cauchy problem through both Finite Difference Method with the approximation of O(c{sup 2}) and Finite Element Method. The obtained Cauchy problem is solved via the fourth and sixth-order Runge-Kutta methods. Validity and reliability of the results are rigorously discussed. Analysis of the chaotic dynamics of flexible Euler-Bernoulli beams for a series of boundary conditions is carried out with the help of the qualitative theory of differential equations. We analyze time histories, phase and modal portraits, autocorrelation functions, the Poincaré and pseudo-Poincaré maps, signs of the first four Lyapunov exponents, as well as the compression factor of the phase volume of an attractor. A novel scenario of transition from periodicity to chaos is obtained, and a transition from chaos to hyper-chaos is illustrated. In particular, we study and explain the phenomenon of transition from symmetric to asymmetric vibrations. Vibration-type charts are given regarding two control parameters: amplitude q{sub 0} and frequency ω{sub p} of the uniformly distributed periodic excitation. Furthermore, we detected and illustrated how the so called temporal-space chaos is developed following the transition from regular to chaotic system dynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Local and nonlocal phase-field models of tumor growth and invasion due to ECM degradation

We present and analyze new multi-species phase-field mathematical models of tumor growth and ECM invasion. The local and nonlocal mathematical models describe the evolution of volume fractions of tumor cells, viable cells (proliferative and hypoxic cells), necrotic cells, and the evolution of matrix-degenerative enzyme (MDE) and extracellular matrix (ECM), together with chemotaxis, haptotaxis, apoptosis, nutrient distribution, and cell-to-matrix adhesion. We provide a rigorous proof of the existence of solutions of the coupled system with gradient-based and adhesion-based haptotaxis effects. In addition, we discuss finite element discretizations of the model, and we present the results of numerical experiments designed to show the relative importance and roles of various effects, including cell mobility, proliferation, necrosis, hypoxia, and nutrient concentration on the generation of MDEs and the degradation of the ECM.

Mathematics↗

Experimental Electron Density Distribution in Actinide Compounds – an Experimental Atoms in Molecules (AIM) Approach

Understanding the basic chemistry of the actinides, in particular of uranium, is essential to address issues related to nuclear fuels, nuclear waste and environmental concerns. Atoms in general are chemically bound to their neighbors via the distribution of electrons within the intervening space. However, this only represents a small proportion of the total electrons, the others are tightly bound to the atomic nuclei and do not participate in chemical bonding. The distribution of electrons in crystalline materials may be examined using the scattering of X-rays. As all electrons scatter X-rays, obtaining the information about the bonding electrons in the presence of a large excess of “irrelevant” electrons requires extremely accurate scattering measurements. Indeed, until recently this was considered impossible for elements as heavy as uranium. In our current project we have made significant improvements in the data quality obtainable for uranium containing compounds. In order to determine the electron density distribution we fit a mathematical model describing the scattering effect to the observed scattering data. This mathematical model has a number of variable parameters that describe the radial and angular distribution of electrons around an atomic center. We have developed such a model to be particularly useful for elements as heavy as uranium. Given the best fit parameters from this model, we are able to map the electron distribution around all atoms in a chemical compound. The topology of this distribution provides us with important characteristics with regard to the chemical bonds. We have now applied these methods to several uranium compounds. In particular we have studied the bonds made by uranium to oxygen, fluorine and chlorine in a number of different environments. The experimental protocols and data analysis protocols developed during this project will permit others in the field to explore the chemical bonding of other heavy element systems. From the few compounds studied to date, we are already discovering the parameters that are characteristic of bonding in such systems, and providing essential experimental benchmarks for theoreticians.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Similarity laws of lunar and terrestrial volcanic flows

A mathematical model for the terrestrial and lunar volcanic flows is proposed. This mathematical model, which is one-dimensional, steady duct flow of a mixture of a gas and small solid particles (rock), has been analyzed in detail. The similarities and the differences of the essential features of lunar and terrestrial volcanic flows are determined. Numerical results for the equilibrium two-phase flows of lunar and terrestrial volcanics under similar conditions are presented. The main results of the theoretical model are: the lunar crater is much larger than the corresponding terrestrial crater; the exit velocity from the lunar volcanic flow may be higher than the lunar escape velocity but the exit velocity of terrestrial volcanic flow is much less than that of the linear case (this result confirms the hypothesis that Australian tektites came from the moon, as a stream of rock and gas of extremely high speed), and the thermal effects on the lunar volcanic flow are much larger than those in the terrestrial case.

Pai, S. I.↗

Development Of Maneuvering Autopilot For Flight Tests

Report describes recent efforts to develop automatic control system operating under supervision of pilot and making airplane follow prescribed trajectories during flight tests. Report represents additional progress on this project. Gives background information on technology of control of test-flight trajectories; presents mathematical models of airframe, engine and command-augmentation system; focuses on mathematical modeling of maneuvers; addresses design of autopilots for maneuvers; discusses numerical simulation and evaluation of results of simulation of eight maneuvers under control of simulated autopilot; and presents summary and discussion of future work.

Menon, P. K. A.↗

Surface Oscillations of An Electromagnetically Levitated Droplet

Oscillating droplets are of interest in a number of disciplines. A practical application is the oscillating drop method, which is a technique for measuring surface tension and viscosity of liquid metals. It is especially suited to undercooled and highly reactive metals, because it is usually performed by electromagnetic levitation. The natural oscillation frequency a f the droplets is related to the surface tension of the material, and the decay of oscillations is related to its viscosity. The fluid flow inside the droplet must be laminar in order for this technique to yield good results. Because no experimental method has yet been developed to visualize flow in electromagnetically-levitated oscillating metal droplets, mathematical modeling is required to determine whether or not turbulence occurs. Three mathematical models of the flow: (1) assuming laminar conditions, (2) using the turbulence model, and (3) using the RNG turbulence model, respectively, are compared and contrasted to determine the physical characteristics of the flow. It is concluded that the RNG model is the best suited for describing this problem. The goal of the presented work was to characterize internal flow in an oscillating droplet of liquid metal, and to verify the accuracy of the characterization by comparing calculated surface tension and viscosity values to experimentally-obtained results.

Berry, S.↗

Quantifying cell migration distance as a contributing factor to the development of rectal toxicity after prostate radiotherapy

Purpose: Spatial information is usually neglected in mathematical models of radiation-induced toxicity. In the presence of inhomogeneous dose distributions produced by intensity modulated radiation therapy (IMRT) and volumetric arc therapy, this may be a limitation. We present a model to quantify the spatial characteristics of the dose distribution on the rectum through the quantification of the distribution of distances between dose points on the surface of the rectum in three-dimensions. The method allows us to evaluate the hypothesis that distances between lower and higher dose regions on the rectum influence radiation damage repair due to the migration of normal cells into damaged areas, and consequently, the development of radiation-induced toxicity in patients treated with radiation for prostate cancer. Methods: We present a method to compute distances between dose points on the surface of the rectum in three dimensions (3D) and to generate distance maps representing the distances between specific dose regions on the rectum. We introduce the concept of the distance dose surface histogram (DDSH), which is computed from the distance maps. The DDSH is a 2D histogram of rectum area on a grid defined by pairwise combinations of dose and distance. Each bin in the DDSH quantifies the area of the rectum exposed to a given dose and at a given distance from other another dose region on the rectum. By summing across the columns and rows of the DDSH, we can generate the dose surface histogram (DSH) and distance surface histogram (DiSH) for a particular dose region. The DiSH is a marginal histogram showing the distribution of distances for the dose points in a specific dose region from another region. We computed the DDSH, DiSH, and DSH for 33 patients treated with IMRT for prostate cancer, nine of whom developed late Grade 2 or higher late rectal toxicity. Results: We show how even though the total area of the rectum exposed to a given dose may be the same for different patients, the distribution of distances for points receiving that dose can be different depending on the shape and contiguity of the region(s) containing those dose points. We also show that area of the rectum in the region receiving more than 75 Gy and at a distance of 16 to 22 mm from the 50 Gy isodose line was significantly correlated to the development of toxicity (p = 0.004, two sided t-test). This suggests that examining the distance distribution of points in specific dose regions could provide valuable additional information in predicting the risk of a patient developing radiation-induced rectal toxicity. Conclusions: We present a new method to quantify the spatial distribution of points in a given region relative to other regions on the rectum. The method provides a means to evaluate the hypothesis that distances between lower and higher dose regions on the rectum influence radiation damage repair due to the migration of normal cells into damaged areas, and may be a contributing factor to the development of radiation-induced toxicity in patients treated with radiation for prostate cancer.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Erratum: “Accurate modeling of the hose instability in plasma wakefield accelerators” [Phys. Plasmas 25, 056703 (2018)]

Here, we would like to correct a typographical error which was introduced in Eqs. (5), (11), (14), (20a), and (20b) during revision of Ref. 1. The series expansion of the plasmaelectron phase space density to the first order of ⟨x⟩ and ⟨px⟩ [Eq. (5) in Ref. 1] correctly reads f p ≈ f p 0 - cos θ (⟨x⟩∂r+ ⟨px⟩∂pr)f p,0 The zeroth-order term, f p,0 , was not printed in Ref. 1. Accordingly, the correct expansion of the wakefield potential [Eq. (11) in Ref. 1] is ψ(r,θ) ≈ ψ0(r) -cos θ X p ∂ r ψ 0 (r), the correct expansion of the source term of the wakefield potential [Eq. (14) in Ref. 1] is S(r, θ) ≈ S 0 (r) - cos θ X p ∂ r S 0 (r), and the correct expansions of the force terms [Eqs. (20a) and (20b) in Ref. 1] are F r,b ≈ F r,b,o - cos θ X b ∂ r Fr,b,0, F r,b ≈ F r,p,o - cos θ ⟨x⟩ ∂ r F r,p,0 , The zeroth order terms in Eqs. (5), (11), (14), (20a), and (20b) are missing in the printing of Ref. 1 but were fully taken into account for the calculation of all derived equations of the mathematical model. The developed mathematical model and physical conclusions in Ref. 1 are therefore all unaltered by, and consistent with, the above corrections.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Extreme-Scale Bayesian Inference for Uncertainty Quantification of Complex Simulations

Uncertainty quantification (UQ)—that is, quantifying uncertainties in complex mathematical models and their large-scale computational implementations—is widely viewed as one of the outstanding challenges facing the field of CS&E over the coming decade. The EUREKA project set to address the most difficult class of UQ problems: those for which both the underlying PDE model as well as the uncertain parameters are of extreme scale. In the project we worked on these extreme-scale challenges in the following four areas: 1. Scalable parallel algorithms for sampling and characterizing the posterior distribution that exploit the structure of the underlying PDEs and parameter-to-observable map. These include structure-exploiting versions of the randomized maximum likelihood method, which aims to overcome the intractability of employing conventional MCMC methods for solving extreme-scale Bayesian inversion problems by appealing to and adapting ideas from large-scale PDE-constrained optimization, which have been very successful at exploring high-dimensional spaces. 2. Scalable parallel algorithms for construction of prior and likelihood functions based on learning methods and non-parametric density estimation. Constructing problem-specific priors remains a critical challenge in Bayesian inference, and more so in high dimensions. Another challenge is construction of likelihood functions that capture unmodeled couplings between observations and parameters. We will create parallel algorithms for non-parametric density estimation using high dimensional N-body methods and combine them with supervised learning techniques for the construction of priors and likelihood functions. 3. Bayesian inadequacy models, which augment physics models with stochastic models that represent their imperfections. The success of the Bayesian inference framework depends on the ability to represent the uncertainty due to imperfections of the mathematical model of the phenomena of interest. This is a central challenge in UQ, especially for large-scale models. We propose to develop the mathematical tools to address these challenges in the context of extreme-scale problems. 4. Parallel scalable algorithms for Bayesian optimal experimental design (OED). Bayesian inversion yields quantified uncertainties in the model parameters, which can be propagated forward through the model to yield uncertainty in outputs of interest. This opens the way for designing new experiments to reduce the uncertainties in the model parameters and model predictions. Such experimental design problems have been intractable for large-scale problems using conventional methods; we will create OED algorithms that exploit the structure of the PDE model and the parameter-to-output map to overcome these challenges. Parallel algorithms for these four problems were created, analyzed, prototyped, implemented, tuned, and scaled up for leading-edge supercomputers, including UT-Austin’s own 10 petaflops Stampede system, ANL’s Mira system, and ORNL’s Titan system. While our focus is on fundamental mathematical/computational methods and algorithms, we will assess our methods on model problems derived from several DOE mission applications, including multiscale mechanics and ice sheet dynamics.

97 MATHEMATICS AND COMPUTING↗

Flow Characteristics of a Medium–High Carbon Mn-Si-Cr Alloyed Steel at High Temperatures

This study investigates the deformation behavior of a medium–high carbon Mn-Si-Cr alloyed steel using hot compression tests. The tests were performed on a Gleeble 1500D thermomechanical simulator with a temperature range of 950–1150 °C and a strain rate range of 0.005–5 s{sup −1}. The processing parameters (i.e., temperature T, strain rate ε-dot , and strain ε) influenced the flow softening behavior of the material. The dynamic recrystallization occurred during hot deformation. Correlations between the Zener–Hollomon parameter and the size and the volume fraction of new recrystallized grains were developed. These findings are described using mathematical models. The strain-compensated Arrhenius-type constitutive model and the multiple-linear model were developed based on the true stress–strain curves we obtained. A comparative study was performed in order to measure the validity of the two models in representing hot deformation behavior. Both models were shown to accurately predict flow stress across a range of conditions, reflecting the characteristics of true stress–strain curves by exhibiting work hardening, dynamic recovery, and dynamic recrystallization. The empirical multiple-linear mathematical model was shown to be more efficient and accurate when calculating the hot deformation behavior of steel at elevated temperatures.

36 MATERIALS SCIENCE↗

Modelling a particular class of stochastic systems

In this paper a method is given for obtaining a mathematical model of a class of black boxes having multiple inputs and multiple outputs in terms of Ito stochastic integral equations. This method is applicable to the class of black boxes having ergodic correlation functions when there is zero applied input. The point of view adopted in this paper is phenomenological in that it is desired that calculations made using the mathematical model should be 'close' to what is actually observed at the output of the black box.

Eyman, E. D.↗

Quantification of Type I Interferon Inhibition by Viral Proteins: Ebola Virus as a Case Study

Type I interferons (IFNs) are cytokines with both antiviral properties and protective roles in innate immune responses to viral infection. They induce an antiviral cellular state and link innate and adaptive immune responses. Yet, viruses have evolved different strategies to inhibit such host responses. One of them is the existence of viral proteins which subvert type I IFN responses to allow quick and successful viral replication, thus, sustaining the infection within a host. We propose mathematical models to characterise the intra-cellular mechanisms involved in viral protein antagonism of type I IFN responses, and compare three different molecular inhibition strategies. We study the Ebola viral protein, VP35, with this mathematical approach. Approximate Bayesian computation sequential Monte Carlo, together with experimental data and the mathematical models proposed, are used to perform model calibration, as well as model selection of the different hypotheses considered. Finally, we assess if model parameters are identifiable and discuss how such identifiability can be improved with new experimental data.

59 BASIC BIOLOGICAL SCIENCES↗