Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mobile Measuring System”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Renewable Energy and Efficiency Technologies in Scenarios of U.S. Decarbonization in Two Types of Models: Comparison of GCAM Modeling and Sector-Specific Modeling

Energy system projections from analytic models inform actions ranging from short-term and local decisions, such as technology and infrastructure deployment, to global and long-term negotiations and targets. Computational limits require the designers of these models to trade off between coverage and resolution. Some models, such as the Global Change Analysis Model (GCAM), represent all energy sources and uses but at a relatively coarse level of resolution. GCAM balances global supply and demand of all energy carriers by endogenously projecting prices for energy sources and costs of greenhouse gas mitigation while capturing interlinkages between the energy system, water, agriculture and land use, the economy, and the climate. This global model was used to frame the Long-Term Strategy released by the White House in 2021 and has been used to inform national and global economy-wide decarbonization discussions and strategy development for decades. Other models instead focus on a portion of the energy sector with greater detail and resolution. The Regional Energy Deployment System (ReEDS) electricity-sector model, for example, projects capacity expansion with an emphasis on integration of variable renewable energy into the grid of the future. The Transportation Energy and Mobility Pathway Options (TEMPO) transportation-sector model enables analysis of household choices in adoption, charging, and use of electric vehicles. The Scout buildings-sector model supports detailed consideration of the policies and markets that can accelerate the adoption of energy conservation measures in buildings. Such sector-specific models are instrumental in informing technology research, sectoral planning strategies, and sector-specific aspects of greenhouse gas (GHG) mitigation strategies in the United States. These global and sector-specific modeling approaches can complement each other. The global approach ensures consistent, endogenous energy pricing and resource allocation, which can substantially diverge from current conditions in transformative scenarios, while the sector-specific approach facilitates representation of granular details across spatial, temporal, technological, and market dimensions that enable exploration of particular interactions and trade-offs. This report presents the results of recent work to explore the differences and tradeoffs between these approaches by comparing GCAM with the sector-specific ReEDS, TEMPO, and Scout models. The report compares both model structures and results, and discusses their potential relevance and applications.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Mars rover concept development

A structured study effort to develop an extensive, innovative set of mobility and navigation concepts for a planetary exploration vehicle along with the concomitant value system and evaluation tools is presented. A further objective is to submit these concepts to a rigorous, structured evaluation process to derive the most promising candidate systems. To support the evaluation process, a three-layer computer model of the Martian surface was developed, based on the 1/64 deg Digital Elevation Model (DEM) of Mars. Local surface roughness based on measured Martian slope distribution and power spectral density was superimposed on the DEM, and rocks based on Moore's distribution model were added. To assess performance, selected concepts were modeled using DADS, and simulations were run with the vehicle traversing the Martian surface model, including one-meter-high vertical steps and one-meter-wide crevasses. The design details of three promising candidate systems are presented, along with the discussion of their evolution with some recommendations.

Mctamaney, Louis S.↗

The properties of and analytical methods for detection of LiOH and Li2CO3

Lithium hydroxide (LiOH) is used as a CO2 absorbent in the Shuttle Extravehicular Mobility Unit (EMU) Portable Life Support System (PLSS). The first objective was to survey parameters that may be used to indicate conversion of LiOH to Li2CO3, and compile a list of all possible properties, including physical, chemical, structural, and electrical, that may serve to indicate the occurrence of reaction. These properties were compiled for the reactant (LiOH), the intermediate monohydrate compound (LiOH.H2O), and the final product (Li2CO3). The second objective was to survey measurement and analytical techniques which may be used in conjunction with each of the properties identified above, to determine the extent of conversion of LiOH to Li2CO3. Both real-time and post-run techniques were of interest. The techniques were also evaluated in terms of complexity, technology readiness, materials/equipment availability, and cost, where possible.

Selvaduray, Guna↗

Robonaut 2 - Preparing for Intra-Vehicular Mobility on the International Space Station

Robonaut 2 (R2) has been undergoing experimental trials on board the International Space Station (ISS) for more than a year. This upper-body anthropomorphic robotic system shown in Figure 1 has been making steady progress after completing its initial checkout. R2 demonstrated free space motion, physically interacted with its human crew mates, manipulated interfaces on its task board and has even used its first tool. This steady growth in capability will lead R2 to its next watershed milestone. Developers are currently testing prototype robotic climbing appendages and a battery backpack in preparation of sending flight versions of both subsystems to the ISS in late 2013. Upon integration of its new components, R2 will be able to go mobile inside the space station with a twofold agenda. First, R2 will learn to maneuver in microgravity in the best possible laboratory for such a task. Second, it will start providing early payback to the ISS program by helping with intra-vehicular (IVA) maintenance tasks. The experience gained inside the ISS will be invaluable in reducing risk when R2 moves to its next stage and is deployed as an extra-vehicular (EVA) tool. Even on its current fixed base stanchion, R2 has already shown its capability of performing several maintenance tasks on the ISS. It has measured the air flow through one of the stations vents and provided previously unavailable real time flow data to ground operators. R2 has cleaned its first handrail, exciting some crew members that perhaps Saturday morning housekeeping on the station may someday become a task they can hand off to their robotic colleague. Other tasks, including using radio frequency identification (RFID) tools for inventory tasks or vacuuming air filters, have also been suggested and will be explored. Once mobile, R2 will take on these tasks and more to free up crew time for more important science and exploration pursuits. In addition to task exploration, research and testing is happening on orbit to prepare for R2 mobility operations. The current vision system in R2 s head is being used to identify and localize IVA handrails throughout the US Lab and ground control software is being updated and integrated in advance of supporting mobility operations.

Badger, Julia↗

Comprehensive Approach to Measure the Mobility Energy Productivity of Freight Transport

Freight travel accounts for a major share of the energy consumed in the transportation sector in any country, and the United States is no exception. Understanding and modeling freight movement are critical, particularly in the context of capturing the impact of emerging technologies on freight travel and its externalities. The domain of freight modeling and forecasting has been gaining pace in recent years, but advancement in comprehensive freight performance metrics is still lagging. Conventional freight performance metrics such as truck-miles, ton-miles, or value-miles are unidimensional and aggregate in nature, making them unsuitable to accurately capture the impact of emerging transportation trends on the performance or productivity of freight systems. Addressing the research need, this paper presents the “Freight Mobility Energy Productivity” metric to quantify freight productivity of current as well as future freight systems, accounting for various costs associated with freight transport. The proposed metric was implemented using data from the Freight Analysis Framework along with other published sources, and shows intuitive results in quantifying freight productivity. Further, a scenario analysis exercise was conducted to test the capability of the metric in tracking improvements in system-level freight productivity as a result of vehicle electrification. The relative differences in Freight Mobility Energy Productivity scores help identify which zones benefit from the vehicle powertrain technology improvement. The results of the scenario analysis reinforce confidence that the proposed metric can be used as a decision support tool in assessing the productivity of existing as well as future freight trends and technologies.

47 OTHER INSTRUMENTATION↗

Effect of Rare Earth Elements (Er, Ho) on Semi-Metallic Materials (ScN) in an Applied Electric Field

The development of materials and fabrication technology for field-controlled spectrally active optics is essential for applications such as membrane optics, filters for LIDARs, windows for sensors, telescopes, spectroscopes, cameras and flat-panel displays. The dopants of rare earth elements, in a host of optical systems, create a number of absorption and emission band structures and can easily be incorporated into many high quality crystalline and amorphous hosts. In wide band-gap semiconductors like ScN, the existing deep levels can capture or emit the mobile charges, and can be ionized with the loss or capture of the carriers which are the fundamental basis of concept for smart optic materials. The band gap shrinkage or splitting with dopants supports the possibility of this concept. In the present work, a semi-metallic material (ScN) was doped with rare earth elements (Er, Ho) and tested under an applied electric field to characterize spectral and refractive index shifts by either Stark or Zeeman Effect. These effects can be verified using the UV-Vis spectroscopy, the Hall Effect measurement and the ellipsometric spectroscopy. The optical band gaps of ScN doped with Er and doped with Ho were experimentally estimated as 2.33eV and 2.24eV ( 0.2eV) respectively. This is less than that of undoped ScN (2.5 0.2eV). The red-shifted absorption onset is a direct evidence for the decrease of band gap energy (Eg), and the broadening of valence band states is attributable to the doping cases. A decrease in refractive index with an applied field was observed as a small shift in absorption coefficient using a variable angle spectroscopic ellipsometer. In the presence of an electric field, mobile carriers are redistributed within the space charge region (SCR) to produce this electro-refractive effect. The shift in refractive index is also affected by the density and location of deep potential wells within the SCR. In addition, the microstructure change was observed by a TEM analysis. These results give an insight for future applications for the field-controlled spectrally active material systems.

Kim, Hyunjung↗

Electronic structure and thermoelectric properties of p-type Ag-doped Mg₂Sn and Mg₂Sn{sub 1-x}Si{sub x} (x=0.05, 0.1)

An experimental and theoretical study of p-type Ag-doped Mg₂Sn and Mg₂Sn{sub 1-x}Si{sub x} (x=0.05, 0.1) is presented. Band structure calculations show that behavior of Ag in Mg₂Sn depends on the site it occupies. Based on Bloch spectral functions and density of states calculations, we show that if Ag substitutes for Sn, it is likely to form a resonant level; if it substitutes for Mg, a rigid-band-like behavior is observed. In both cases, the doped system should exhibit p-type conductivity. Experimentally, thermoelectric, thermomagnetic, and galvanomagnetic properties are investigated of p-type Mg₂Sn{sub 1–x}Si{sub x} (x=0, 0.05, 0.1) samples synthesized by a co-melting method in sealed crucibles. Ag effectively dopes the samples p-type, and thermoelectric power factors in excess of 20μW cm⁻¹K⁻² are observed in optimally doped samples. From the measured Seebeck coefficient, Nernst coefficient, and mobility, we find that the combination of acoustic phonon scattering, optical phonon scattering and defect scattering results in an energy-independent scattering rate. No resonant-like increase in thermopower is observed, which correlates well with electronic structure calculations assuming the location of Ag on Mg site.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SU-E-P-46: Clinical Acceptance Testing and Implementation of a Portable CT Unit

Purpose: Planning for the first installation in New England of a new portable CT unit to be used in the Operating Room required the integration of many departments including Surgery, Neurosurgery, Information Services, Clinical Engineering, Radiology and Medical Physics/Radiation Safety. Acceptance testing and the quality assurance procedures were designed to optimize image quality and patient and personnel radiation exposure. Methods: The vendor’s protocols were tested using the CT Dosimetry phantoms. The system displayed the CTDIw instead of the CTDIvol while testing the unit. Radiation exposure was compared to existing CT scanners from installed CT units throughout the facility. Brainlab measures all 4 periphery slots on the CT Dosimetry phantom. The ACR measures only the superior slot for the periphery measurement. A comprehensive radiation survey was also performed for several locations. Results: The CTDIvol measurements were comparable for the following studies: brain, C-Spine, and sinuses. However, the mobile CT measurements were slightly higher than other CT units but within acceptable tolerance if measured using the ACR method.Based on scatter measurements, it was determined if any personnel were to stay in the OR Suite during image acquisition that the appropriate lead apron and thyroid shields had to be worn.In addition, to reduce unnecessary scatter, there were two mobile 6 foot wide shields (1/16″ lead equivalent) available to protect personnel in the room and adjacent areas. Conclusion: Intraoperative CT provides the physician new opportunities for evaluation of the progression of surgical resections and device placement at the cost of increasing the amount of trained personnel required to perform this procedure. It also brings with it challenges to keep the radiation exposure to the patients and staff within reasonable limits.

60 APPLIED LIFE SCIENCES↗

System calibration of the 1.4 GHz and 5 GHz radiometers for soil moisture remote sensing

Two microwave radiometers at the frequencies of 1.4 GHz and 5 GHz were mounted on a mobile tower and used for a remote sensing of soil moisture experiment at a Beltsville Agriculture Research Center test site. The experiment was performed in October 1979 over both bare field and fields covered with grass, soybean, and corn. The calibration procedure for the radiometer systems which forms the basis of obtaining the final radiometric data product is described. It is estimated from the calibration results that the accuracy of the 1.4 GHz radiometric measurements is about + or - 3 K. The measured 5 GHz brightness temperatures over bare fields with moisture content greater than 10 percent by dry weight are about 8 K lower than those taken simultaneously at 1.4 GHz. This could be due to either (1) a 5 GHz antenna side lobe seeing the cold brightness of the sky, or (2) the thermal microwave emission from a soil being less sensitive to surface roughness at 5 GHz than at 1.4 GHz.

Wang, J.↗

Remote sensing of tree attenuation at 870 MHz along simulated Earth-satellite paths

Tree attenuation at 870 MHz was studied using a helicopter as a source platform and a van with receiver and data acquisition instrumentation. Tree attenuation results were obtained with the van stationary and in motion to determine land mobile satellite systems link parameter requirements (expected fading due to roadside trees for mobile and stationary vehicles). Single tree attenuation results give worst case median fades as high as 15 dB although roadside tree values produce fades greater than 20 dB for small percentages of time. The cumulative fade distributions and their relative contributions as a function of path elevation angle, right side versus left side driving, and different road types are derived from the field measurements.

Vogel, W. J.↗

K- and Ka-band mobile-vehicular satellite-tracking reflector antenna system for the NASA ACTS mobile terminal

This paper describes the development of the K- and Ka-band mobile-vehicular satellite-tracking reflector antenna system for NASA's ACTS Mobile Terminal (AMT) project. ACTS is NASA's Advanced Communications Technology Satellites. The AMT project will make the first experimental use of ACTS soon after the satellite is operational, to demonstrate mobile communications via the satellite from a van on the road. The AMT antenna system consists of a mechanically steered small reflector antenna, using a shared aperture for both frequency bands and fitting under a radome of 23 cm diameter and 10 cm height, and a microprocessor controlled antenna controller that tracks the satellite as the vehicle moves about. The RF and mechanical characteristics of the antenna and the antenna tracking control system are discussed. Measurements of the antenna performance are presented.

Densmore, Art↗

A Comprehensive Approach to Measure the Mobility Energy Productivity of Freight Transport: Preprint

Freight travel accounts for a major share of the energy consumed in the transportation sector in any country, and the United States is no exception. Understanding and modeling freight movement are critical, particularly in the context of capturing the impact of emerging technologies on freight travel and its externalities. The domain of freight modeling and forecasting is gaining pace in the recent years, but advancement in comprehensive freight performance metrics is still lagging. Conventional freight performance metrics such as truck-miles, ton-miles, or value-miles are unidimensional and aggregate in nature, making them unsuitable to accurately capture the impact of emerging transportation trends on the performance or productivity of freight systems. Addressing the research need, this paper presents the “Freight Mobility Energy Productivity” metric to quantify freight productivity of current as well as future freight systems, accounting for various costs associated with freight transport. The proposed metric was implemented using data from the Freight Analysis Framework along with other published sources, which shows intuitive results in quantifying freight productivity. Further, a scenario analysis exercise was conducted to test the capability of the metric in tracking improvements in system-level freight productivity as a result of vehicle electrification. The relative differences in Freight Mobility Energy Productivity scores help identify which zones benefit from the vehicle powertrain technology improvement. The results of the scenario analysis reinforce confidence that the proposed metric can be used as a decision support tool in assessing the productivity of existing as well as future freight trends and technologies.

47 OTHER INSTRUMENTATION↗

Metalorganic chemical vapor deposition growth of high-mobility AlGaN/AlN/GaN heterostructures on GaN templates and native GaN substrates

Severe surface decomposition of semi-insulating (SI) GaN templates occurred in high-temperature H{sub 2} atmosphere prior to epitaxial growth in a metalorganic chemical vapor deposition system. A two-step heating process with a surface stabilization technique was developed to preserve the GaN template surface. Utilizing the optimized heating process, a high two-dimensional electron gas mobility ∼2000 cm{sup 2}/V·s was obtained in a thin AlGaN/AlN/GaN heterostructure with an only 100-nm-thick GaN spacer layer homoepitaxially grown on the GaN template. This technique was also demonstrated viable for native GaN substrates to stabilize the surface facilitating two-dimensional growth of GaN layers. Very high residual silicon and oxygen concentrations were found up to ∼1 × 10{sup 20 }cm{sup −3} at the interface between the GaN epilayer and the native GaN substrate. Capacitance-voltage measurements confirmed that the residual carbon doping controlled by growth conditions of the GaN epilayer can be used to successfully compensate the donor-like impurities. State-of-the-art structural properties of a high-mobility AlGaN/AlN/GaN heterostructure was then realized on a 1 × 1 cm{sup 2} SI native GaN substrate; the full width at half maximum of the X-ray rocking curves of the GaN (002) and (102) peaks are only 21 and 14 arc sec, respectively. The surface morphology of the heterostructure shows uniform parallel bilayer steps, and no morphological defects were noticeable over the entire epi-wafer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spatial and rotational quality assurance of 6DOF patient tracking systems

Purpose: External tracking systems used for patient positioning and motion monitoring during radiotherapy are now capable of detecting both translations and rotations. In this work, the authors develop a novel technique to evaluate the 6 degree of freedom 6(DOF) (translations and rotations) performance of external motion tracking systems. The authors apply this methodology to an infrared marker tracking system and two 3D optical surface mapping systems in a common tumor 6DOF workspace. Methods: An in-house designed and built 6DOF parallel kinematics robotic motion phantom was used to perform motions with sub-millimeter and subdegree accuracy in a 6DOF workspace. An infrared marker tracking system was first used to validate a calibration algorithm which associates the motion phantom coordinate frame to the camera frame. The 6DOF positions of the mobile robotic system in this space were then tracked and recorded independently by an optical surface tracking system after a cranial phantom was rigidly fixed to the moveable platform of the robotic stage. The calibration methodology was first employed, followed by a comprehensive 6DOF trajectory evaluation, which spanned a full range of positions and orientations in a 20 × 20 × 16 mm and 5° × 5° × 5° workspace. The intended input motions were compared to the calibrated 6DOF measured points. Results: The technique found the accuracy of the infrared (IR) marker tracking system to have maximal root-mean square error (RMSE) values of 0.18, 0.25, 0.07 mm, 0.05°, 0.05°, and 0.09° in left–right (LR), superior–inferior (SI), anterior–posterior (AP), pitch, roll, and yaw, respectively, comparing the intended 6DOF position and the measured position by the IR camera. Similarly, the 6DOF RSME discrepancy for the HD optical surface tracker yielded maximal values of 0.46, 0.60, 0.54 mm, 0.06°, 0.11°, and 0.08° in LR, SI, AP, pitch, roll, and yaw, respectively, over the same 6DOF evaluative workspace. An earlier generation 3D optical surface tracking unit was observed to have worse tracking capabilities than both the IR camera unit and the newer 3D surface tracking system with maximal RMSE of 0.69, 0.74, 0.47 mm, 0.28°, 0.19°, and 0.18°, in LR, SI, AP, pitch, roll, and yaw, respectively, in the same 6DOF evaluation space. Conclusions: The proposed technique was found to be effective at evaluating the performance of 6DOF patient tracking systems. All observed optical tracking systems were found to exhibit tracking capabilities at the sub-millimeter and subdegree level within a 6DOF workspace.

60 APPLIED LIFE SCIENCES↗

Thermochemically-Informed Mass Transport Model for Zr in U-Zr Fuel

Recent improvements to the coupled Thermochimica-MOOSE/BISON code system have enabled efficient calculations of species transport based on direct evaluation of composition and temperature dependent chemical potentials of the species. This presents an alternative to the traditional approach to species transport in nuclear fuels, which has been to employ a diffusion formulation that combines concentration-gradient driven Fickian diffusion with a Soret term based on a heat of transport fit to experimental data. Here we describe the application of the coupled code system to the diffusion of Zr in U-Zr metallic fuel. New classes implemented in BISON to solve this problem are documented. The Zr concentration profile after 50 years of diffusion is found to be strongly dependent on the assumptions made pertaining how to mobility is calculated in multi-phase regions of the fuel element. Two assumptions are compared (simple averaging of mobilities and using the majority phase mobility), and good qualitative agreement with experimental measurements is obtained using the majority phase assumption.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Safety evaluation of connected and automated vehicles in mixed traffic with conventional vehicles at intersections

Connected and Automated Vehicles (CAVs) can potentially improve the performance of the transportation system by reducing human errors. This paper investigates the safety impact of CAVs in a mixed traffic with conventional vehicles at intersections. Analyzing real-world AV crashes in California revealed that rear-end crashes at intersections are the dominant crash type. Therefore, to enhance our understanding of the future interactions between human-driven vehicles with CAVs at intersections, a simulation framework was developed to model the mixed traffic environment of Automated Vehicles (AV), cooperative AVs, and conventional human-driven vehicles. In order to model AVs driving behavior, Adaptive Cruise Control (ACC) and cooperative ACC (CACC) models are utilized. Particularly, this study explores system improvements due to automation and connectivity across varying CAV market penetration scenarios. ACC and CACC car following models are used to mimic the behavior of AVs and cooperative AVs. Real-world connected vehicle data are utilized to modify and tune the acceleration/deceleration regimes of the Wiedemann model. Next, the driving volatility concept capturing variability in vehicle speeds was utilized to calibrate the simulation to represent the safety performance of a real-world environment. Two surrogate safety measures are used to evaluate the safety performance of a representative intersection under different market penetration rate of CAVs: the number of longitudinal conflicts and driving volatility. At low levels of ACC market penetration, the safety improvements were found to be marginal, but safety improved substantially with more than 40% ACC penetration. Additional safety improvements can be achieved more quickly through the addition of cooperation and connectivity through CACC. Furthermore, ACC/CACC vehicles were found to improve mobility performance in terms of average speed and travel time at intersections.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

How mixing tetraglyme with the ionic liquid 1- n -hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide changes volumetric and transport properties: An experimental and computational study

The viscosity and density of the ionic liquid (IL) 1-n-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C 6 mim][NTf 2 ]), the molecular solvent tetraethylene glycol dimethyl ether (tetraglyme or G4) and their binary mixtures were measured experimentally as a function of temperature. The same systems were also studied using classical molecular dynamics (MD) simulations. The viscosities of the [C 6 mim][NTf 2 ]/G4 mixtures decrease with increasing G4 concentration, though not as much as an ideal mixing model would predict. Detailed analysis of the MD results reveals that G4 preferentially solvates cations, leading to a reduction in the interaction energy between cations and anions and a subsequent enhancement in anion mobility. A similar effect has been reported when glymes are mixed with salts containing alkali metal cations, with the resulting mixtures being called “solvate” ionic liquids. The simulations predict that the ionic conductivity will be maximized when the G4 mole fraction is around 10–20%. The ability of G4 to effectively solvate the cations stems from localized charges on the oxygen. In conclusion, the simulations predict that solvents having large localized positive charges would preferentially solvate anions, leading to enhanced cation mobility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗