Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model initialization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

SMOS Soil Moisture Data Assimilation in the NASA Land Information System: Impact on LSM Initialization and NWP Forecasts

Land surface models are important components of numerical weather prediction (NWP) models, partitioning incoming energy into latent and sensitive heat fluxes that affect boundary layer growth and destabilization. During warm-season months, diurnal heating and convective initiation depend strongly on evapotranspiration and available boundary layer moisture, which are substantially affected by soil moisture content. Therefore, to properly simulate warm-season processes in NWP models, an accurate initialization of the land surface state is important for accurately depicting the exchange of heat and moisture between the surface and boundary layer. In this study, soil moisture retrievals from the Soil Moisture and Ocean Salinity (SMOS) satellite radiometer are assimilated into the Noah Land Surface Model via an Ensemble Kalman Filter embedded within the NASA Land Information System (LIS) software framework. The output from LIS-Noah is subsequently used to initialize runs of the Weather Research and Forecasting (WRF) NWP model. The impact of assimilating SMOS retrievals is assessed by initializing the WRF model with LIS-Noah output obtained with and without SMOS data assimilation. The southeastern United States is used as the domain for a preliminary case study. During the summer months, there is extensive irrigation in the lower Mississippi Valley for rice and other crops. The irrigation is not represented in the meteorological forcing used to drive the LIS-Noah integration, but the irrigated areas show up clearly in the SMOS soil moisture retrievals, resulting in a case with a large difference in initial soil moisture conditions. The impact of SMOS data assimilation on both Noah soil moisture fields and on short-term (0-48 hour) WRF weather forecasts will be presented.

Blankenship, Clay↗
NASA NTRS1986

A phoenics model for the triaxial loading of an initially cylindrical mass of rate-type material with provisions for bulging and yield

This work traces the response of a granular material via the Ten Coefficient Truesdell rate-type constituitive model into the simplest meaningful loading: the triaxial test configuration. A functional relation has been posed for computing the rather peculiar relation between average applied stress and average porosity. Using that relation an attack has been mounted on the dilemma that exists between dynamic and constitutive use of the pressure variable; that is relating dynamic pressure, thermodynamic pressure, stress deviator and higher stress invariants. The resolution was as a linear superposition with a one-way feedback, in that while the dynamic component could not effect the constituitive component, the converse was not true since density appears in the momentum transport relation.

French, K. W., Jr.↗
NASA NTRS1988

Definition of common support equipment and space station interface requirements for IOC model technology experiments

A study was conducted to identify the common support equipment and Space Station interface requirements for the IOC (initial operating capabilities) model technology experiments. In particular, each principal investigator for the proposed model technology experiment was contacted and visited for technical understanding and support for the generation of the detailed technical backup data required for completion of this study. Based on the data generated, a strong case can be made for a dedicated technology experiment command and control work station consisting of a command keyboard, cathode ray tube, data processing and storage, and an alert/annunciator panel located in the pressurized laboratory.

Russell, Richard A.↗
NASA NTRS1989

Study of the atmospheric general circulation as an initial value problem with the NCAR Community Climate Model

The essential elements of the transition of a model atmosphere to the equilibrium state from two extreme rest states, a cold (240 K) state and a warm (310 K) state, were examined using the NCAR Community Climate Model. It is shown that the same equilibrium state was reached in the two spinup conditions, which was also the same that was reported for this model by Williamson and Williamson (1984), who started from still a different initial condition. The spinup from the cold initial condition was faster than that from the warm condition, although the final stages of the approach to equilibrium were very simular in both cases. It was also found that the spinup of the barotropic flow lagged behind that of the baroclinic flow and the thermal field, and the model tropics spinup was faster than that of the mid-latitudes.

Chen, Tsing-Chang↗
NASA NTRS1981

Large-scale wind tunnel tests of a sting-supported V/STOL fighter model at high angles of attack

A new sting model support has been developed for the NASA/Ames 40- by 80-Foot Wind Tunnel. This addition to the facility permits testing of relatively large models to large angles of attack or angles of yaw depending on model orientation. An initial test on the sting is described. This test used a 0.4-scale powered V/STOL model designed for testing at angles of attack to 90 deg and greater. A method for correcting wake blockage was developed and applied to the force and moment data. Samples of this data and results of surface-pressure measurements are presented.

Stoll, F.↗
NASA NTRS1989

The ages of globular cluster stars - Effects of rotation on pre-main-sequence, main-sequence, and turnoff evolution

Evolutionary sequences for low-metallicity stars (Z ranging from 0.001 to 0.0001) to study the effects of internal stellar rotation on the evolutionary time scales in the pre-main sequence, the main sequence (MS), and around the MS turnoff. Although a substantial amount of angular momentum remains in the interior, rotation is only a minor perturbation on the structure and ages of globular cluster stars. Even models with large initial angular momenta have MS lifetimes that are within 1 percent of those of standard models of the same mass and composition. Therefore, rotation does not affect age estimates of globular clusters from isochrone fitting. Furthermore, the models suggest that because rotation is not likely to affect horizontal-branch (HB) morphology, it does not affect significantly age estimates from the Delta-V method. Nevertheless, the internal angular momentum in the models is consistent with observations of surface rotational velocities on the HB, which require the preservation of a large reservoir of internal angular momentum.

Deliyannis, Constantine P.↗
NASA NTRS1993

A determination of the external forces required to move the benchmark active controls testing model in pure plunge and pure pitch

In view of the strong need for a well-documented set of experimental data which is suitable for the validation and/or calibration of modern Computational Fluid Dynamics codes, the Benchmark Models Program was initiated by the Structural Dynamics Division of the NASA Langley Research Center. One of the models in the program, the Benchmark Active Controls Testing Model, consists of a rigid wing of rectangular planform with a NACA 0012 profile and three control surfaces (a trailing-edge control surface, a lower-surface spoiler, and an upper-surface spoiler). The model is affixed to a flexible mount system which allows only plunging and/or pitching motion. An approximate analytical determination of the forces required to move this model, with its control surfaces fixed, in pure plunge and pure pitch at a number of test conditions is included. This provides a good indication of the type of actuator system required to generate the aerodynamic data resulting from pure plunging and pure pitching motion, in which much interest was expressed. The analysis makes use of previously obtained numerical results.

Dcruz, Jonathan↗
NASA NTRS2004

Ozone Measurements and a 3D Chemical Transport Model

We have used our three-dimensional chemical transport model (CTM) to calculate the expected reponse of stratospheric composition over the past 30 years to forcing by chlorine and bromine compounds, solar ultraviolet, and volcanic aerosols. The CTM uses off-line winds and temperatures fiom a 50-year run of the finite volume general circulation model (FVGCM). We compare the total column ozone and the ozone profile fiom the CTM output to a variety of data sources. These include a merged total ozone data set from TOMS and SBUV using the new version 8 algorithm. Total ozone fiom the CTM are compared to ground-station measurements of total ozone at specific locations. Ozone profiles are compared to satellite meausrements fiom SBUV, SAGE, and HALOE. Profiles are also compared to ozonesondes over several locations. The results of the comparisons are quantified by using a time-series statistical analysis to determine trends, solar cycle, and volcanic reponse in both the model and in the data. Initial results indicate that the model responds to forcings in a way that is similar to the observed atmospheric response. The model does seem to be more sensitive to the chlorine and bromine perturbation ihan is the data. Further details and comparisons wiii be discussed.

Stolarski, Richard S.↗
NASA NTRS1996

Numerical Simulation of Wake Vortices Measured During the Idaho Falls and Memphis Field Programs

A numerical large-eddy simulation model is under modification and testing for application to aircraft wake vortices. The model, having a meteorological framework, permits the interaction of wake vortices with environments characterized by crosswind shear, stratification, and humidity. As part of the validation process, model results are compared with measured field data from the 1990 Idaho Falls and the 1994-1995 Memphis field experiments. Cases are selected that represent different aircraft and a cross section of meteorological environments. Also included is one case with wake vortex generation in ground effect. The model simulations are initialized with the appropriate meteorological conditions and a post roll-up vortex system. No ambient turbulence is assumed in our initial set of experiments, although turbulence can be self generated by the interaction of the model wakes with the ground and environment.

Proctor, Fred H.↗
NASA NTRS2008

Coronal Mass Ejections and their Implications for the Corona and Heliosphere

Coronal mass ejections (CMEs) are the largest and most energetic form of transients that connect the Sun to the heliosphere. They are critically important both for understanding the physical mechanisms of explosive solar activity and for predicting space weather. Furthermore they are an extreme example of how cross-scale coupling can play a critical role in determining the properties of a large-scale dynamical system. In this presentation CME theories are reviewed and the latest results from 3D numerical modeling of CME initiation propagation to the heliosphere are presented. In particular the focus is on the breakout model, but many of the results hold for the flux rope models as well. The implications of these results for understanding heliospheric structure and dynamics and for upcoming space missions will be discussed.

Antiochos, Spiro K.↗
NASA NTRS2021

Modeling Interplanetary Expansion and Deformation of CMEs With ANTEATR-PARADE: Relative Contribution of Different Forces

Coronal Mass Ejections (CMEs) are key drivers of space weather activity but most predictions have been limited to the expected arrival time of a CME, rather than the internal properties that affect the severity of an impact. Many properties, such as the magnetic field density and mass density, follow conservation laws and vary systematically with changes in the size of a CME. We present ANTEATR-PARADE, the newest version of the ANTEATR arrival time model, which now includes physics-driven changes in the size and shape of both the CME's central axis and its cross section. Internal magnetic and thermal and external drag forces affect the acceleration of the CME in different directions, inducing asymmetries between the radial and perpendicular directions. These improvements should lead to more realistic CME velocities, both bulk and expansion, sizes and shapes, and internal properties. We present the model details, an initial illustration of the general behavior, and a study of the relative importance of the different forces. The model shows a pancaking of both the cross section and central axis of the CME so that their radial extent becomes smaller than their extent in the perpendicular direction. We find that the initial velocities, drag, any form of cross section expansion, and the precise form of thermal expansion have strong effects. The results are less sensitive to axial forces and the specific form of the cross section expansion.

C. Kay↗
NASA NTRS2007

Projection Method for Flows with Large Density Variations

Numerical models of solidification including a mushy zone are notoriously inefficient; most of them are based on formulations that require the coupled solution of the velocity components in the momentum equation greatly restricting the range of applicability of the models. There are only two models known to the authors that have used a projection or fractional step formulation, but none of these were used to model problems of any significant size. A third model was only applied to a partial mushy zone with no all-fluid region. Our initial attempts at modeling directional solidification in the presence of a developing mushy zone using a projection formulation encountered very serious difficulties once solidification starts. These difficulties were traced to the inability of the method to deal with large local density differences in the vicinity of the fluid-mush interface. As a result, a modified formulation of the projection method has been developed, that maintains the coupling between the body force and the pressure gradient and is presented in this work. The new formulation is shown to be robust and efficient, and can be applied to problems involving very large meshes. This is illustrated in this work through its application to simulations involving Pb-Sb and Pb-Sn alloys.

Heinrich, Juan C.↗
NASA NTRS2023

A Single-Point Modeling Approach for the Intercomparison and Evaluation of Ozone Dry Deposition Across Chemical Transport Models (Activity 2 of AQMEII4)

A primary sink of air pollutants and their precursors is dry deposition. Dry deposition estimates differ across chemical transport models, yet an understanding of the model spread is incomplete. Here, we introduce Activity 2 of the Air Quality Model Evaluation International Initiative Phase 4 (AQMEII4). We examine 18 dry deposition schemes from regional and global chemical transport models as well as standalone models used for impact assessments or process understanding. We configure the schemes as single-point models at eight Northern Hemisphere locations with observed ozone fluxes. Single-point models are driven by a common set of site-specific meteorological and environmental conditions. Five of eight sites have at least 3 years and up to 12 years of ozone fluxes. The interquartile range across models in multiyear mean ozone deposition velocities ranges from a factor of 1.2 to 1.9 annually across sites and tends to be highest during winter compared with summer. No model is within 50 % of observed multiyear averages across all sites and seasons, but some models perform well for some sites and seasons. For the first time, we demonstrate how contributions from depositional pathways vary across models. Models can disagree with respect to relative contributions from the pathways, even when they predict similar deposition velocities, or agree with respect to the relative contributions but predict different deposition velocities. Both stomatal and nonstomatal uptake contribute to the large model spread across sites. Our findings are the beginning of results from AQMEII4 Activity 2, which brings scientists who model air quality and dry deposition together with scientists who measure ozone fluxes to evaluate and improve dry deposition schemes in the chemical transport models used for research, planning, and regulatory purposes.

Dry deposition↗
NASA NTRS1998

Development of Numerical Extended Hydrodynamics for Transition-Regime Non-Equilibrium Flows Encountered in Semiconductor Manufacturing Processes

Six months of funding was received for the proposed three year research program (funding for the period from March 1, 1997 to August 31, 1997). Although the official starting date for the project was March 1, 1997, no funding for the project was received until July 1997. In the funded research period, considerable progress was made on Phase I of the proposed research program. The initial research efforts concentrated on applying the 10-, 20-, and 35-moment Gaussian-based closures to a series of standard two-dimensional non-reacting single species test flow problems, such as the flat plate, couette, channel, and rearward facing step flows, and to some other two-dimensional flows having geometries similar to those encountered in chemical-vapor deposition (CVD) reactors. Eigensystem analyses for these systems for the case of two spatial dimensions was carried out and efficient formulations of approximate Riemann solvers have been formulated using these eigenstructures. Formulations to include rotational non-equilibrium effects into the moment closure models for the treatment of polyatomic gases were explored, as the original formulations of the closure models were developed strictly for gases composed of monatomic molecules. The development of a software library and computer code for solving relaxing hyperbolic systems in two spatial dimensions of the type arising from the closure models was also initiated. The software makes use of high-resolution upwind finite-volumes schemes, multi-stage point implicit time stepping, and automatic adaptive mesh refinement (AMR) to solve the governing conservation equations for the moment closures. The initial phase of the code development was completed and a numerical investigation of the solutions of the 10-moment closure model for the simple two-dimensional test cases mentioned above was initiated. Predictions of the 10-moment model were compared to available theoretical solutions and the results of direct-simulation Monte Carlo (DSMC) calculations. The first results of this study were presented at a meeting last year.

Groth, Clinton P. T.↗
NASA NTRS2020

Using a Simple Water Balance Framework to Quantify the Impact of Soil Moisture Initialization on Subseasonal Evapotranspiration and Air Temperature Forecasts

Past studies have shown that accurate soil moisture initialization can contribute significant skill to near-surface air temperature (T2M) forecasts at subseasonal leads. The mechanisms by which soil moisture contributes such skill are examined here with a simple water balance-based model that captures the essence of soil moisture behavior in a state-of-the-art subseasonal-to-seasonal (S2S) forecasting system. The simple model successfully transforms initial soil moisture contents into average “forecasted” ET values at 16-30 day lead that agree well, during summer, with the values forecasted by the full NASA GEOS S2S system, indicating that soil moisture initialization dominates over forecasted meteorology in determining ET fluxes at subseasonal leads. When the simple model’s ET anomalies are interpreted in terms of T2M anomalies, a similar conclusion is reached for T2M: soil moisture initialization explains much (about 50% in the eastern half of the continental US) of the T2M anomalies produced by the full GEOS S2S system at 16-30 day lead, and the T2M forecasts produced by the simple model capture about half of the skill attained by the full system. The simple model’s framework is particularly conducive to an analysis of uncertainty in forecasts. Drier soils are generally found to induce larger uncertainty in ET (and thus T2M) forecasts, a result linked to the functional form relating ET to soil moisture in the simple model and verified by an analysis of the ensemble spreads within the forecasts produced by the full GEOS S2S system

Randal D Koster↗
NASA NTRSDate not supplied

Implementation of Two Local Correlation-Based Transition Models in OVERFLOW 2.3e

Accurate prediction of the laminar-to-turbulent boundary layer transition is highlighted as a vital component of NASA's CFD Vision 2030 Study. With an increased emphasis on greener air transports and sustainable aviation, transition modeling is anticipated to have an added significance, particularly in the applications related to laminar flow technology. However, unmanned aerial vehicles, crewed reentry vehicles, and ground-to-flight extrapolation all benefit from transition models. It is useful to incorporate a variety of models in CFD solvers because there isn't a single transition model that is ideal for the complete spectrum of applications. While the Langtry-Menter γ–Reθt model has been widely used for CFD predictions of flows with laminar, transitional, and turbulent boundary layers, it does not meet the criteria for Galilean invariance, a desirable attribute for rotorcraft applications. To help overcome that limitation, we have implemented Menter's SST-based γ transition model within NASA’s OVERFLOW Overset CFD code (version 2.3e). In addition, an SA-based implementation of the Langtry-Menter γ–Reθt transition model has also been implemented in view of the increased robustness of the SA-turbulence model for external aerodynamic applications. An initial assessment of the implemented models has been carried out using benchmark 2D test cases involving flat plates and the NLF-0416 airfoil, focusing on bypass, Tollmien-Schlichting, and laminar separation bubble-induced transition scenarios. In comparison to the Langtry-Menter γ–Reθt model, both models were found to produce increased computation efficiency, principally as a result of the decrease from four to three auxiliary transport equations. Results from the initial analysis will be presented, along with additional details pertaining to the deployment of these models.

CFD modeling↗
NASA NTRS1989

Mesoscale acid deposition modeling studies

The work performed in support of the EPA/DOE MADS (Mesoscale Acid Deposition) Project included the development of meteorological data bases for the initialization of chemistry models, the testing and implementation of new planetary boundary layer parameterization schemes in the MASS model, the simulation of transport and precipitation for MADS case studies employing the MASS model, and the use of the TASS model in the simulation of cloud statistics and the complex transport of conservative tracers within simulated cumuloform clouds. The work performed in support of the NASA/FAA Wind Shear Program included the use of the TASS model in the simulation of the dynamical processes within convective cloud systems, the analyses of the sensitivity of microburst intensity and general characteristics as a function of the atmospheric environment within which they are formed, comparisons of TASS model microburst simulation results to observed data sets, and the generation of simulated wind shear data bases for use by the aviation meteorological community in the evaluation of flight hazards caused by microbursts.

Kaplan, Michael L.↗
NASA NTRS1994

Automation of reverse engineering process in aircraft modeling and related optimization problems

During the year of 1994, the engineering problems in aircraft modeling were studied. The initial concern was to obtain a surface model with desirable geometric characteristics. Much of the effort during the first half of the year was to find an efficient way of solving a computationally difficult optimization model. Since the smoothing technique in the proposal 'Surface Modeling and Optimization Studies of Aerodynamic Configurations' requires solutions of a sequence of large-scale quadratic programming problems, it is important to design algorithms that can solve each quadratic program in a few interactions. This research led to three papers by Dr. W. Li, which were submitted to SIAM Journal on Optimization and Mathematical Programming. Two of these papers have been accepted for publication. Even though significant progress has been made during this phase of research and computation times was reduced from 30 min. to 2 min. for a sample problem, it was not good enough for on-line processing of digitized data points. After discussion with Dr. Robert E. Smith Jr., it was decided not to enforce shape constraints in order in order to simplify the model. As a consequence, P. Dierckx's nonparametric spline fitting approach was adopted, where one has only one control parameter for the fitting process - the error tolerance. At the same time the surface modeling software developed by Imageware was tested. Research indicated a substantially improved fitting of digitalized data points can be achieved if a proper parameterization of the spline surface is chosen. A winning strategy is to incorporate Dierckx's surface fitting with a natural parameterization for aircraft parts. The report consists of 4 chapters. Chapter 1 provides an overview of reverse engineering related to aircraft modeling and some preliminary findings of the effort in the second half of the year. Chapters 2-4 are the research results by Dr. W. Li on penalty functions and conjugate gradient methods for quadratic programming problems.

Li, W.↗