Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nano structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Influence of helium dilution of silane on microstructure and opto-electrical properties of hydrogenated nanocrystalline silicon (nc-Si:H) thin films deposited by HW-CVD

Highlights: ► nc-Si:H films synthesized using HW-CVD method from silane and helium gas mixture without hydrogen. ► Volume fraction of crystallites and its size in the films decreases with increase in He dilution of SiH{sub 4}. ► Increase in Urbach energy and defect density with increase in He dilution of SiH{sub 4}. ► Increasing He dilution, hydrogen bonding in the films shifts from Si-H{sub 2} and (Si-H{sub 2}){sub n} complexes to Si-H. ► Hydrogen content films were found to be <2.2 at.% but the bandgap remains as high as 2.0 eV or even more. -- Abstract: We report influence of helium dilution of silane in hot wire chemical vapor deposition for hydrogenated nano-crystalline silicon films. Structural properties of these films have been investigated by using Raman spectroscopy, low angle x-ray diffraction, Fourier transform infra-red spectroscopy and non-contact atomic force microscopy. Optical characterization has been performed by UV–visible spectroscopy. It has been observed that in contrast to conventional plasma enhanced chemical vapor deposition, the addition of helium with silane in hot wire chemical vapor deposition has an adverse effect on the crystallinity and the material properties. Hydrogen content in the films was found <2.2 at.% whereas the bandgap remain as high as 2 eV or more. Increase in Urbach energy and defect density also suggests the deterioration effect of helium on material properties. The possible reasons for the deterioration of crystallinity and the material properties have been discussed.

36 MATERIALS SCIENCE↗

Effect of Mn doping on structural and magnetic susceptibility of C-type rare earth nano oxides Er{sub 2−x}Mn{sub x}O{sub 3}

Graphical abstract: Display Omitted Highlights: ► Er{sub 2−x}Mn{sub x}·O{sub 3} (0.0 ≤ x ≤ 0.20) prepared by sol–gel method. ► The change in lattice parameter is not linear with x due to the change in crystallite size with doping. ► Anomalous concentration dependence is found in magnetic susceptibility. ► The effective magnetic moment μ{sub eff} is found to decrease with composition parameter x. ► Superexchange interactions between Er ions depending on the amount of Mn or Er in different sites. -- Abstract: The manganese doped rare earth oxides Er{sub 2−x}Mn{sub x} O{sub 3} (0.0 ≤ x ≤ 0.20) were synthesized by a sol–gel process and analyzed by X-ray diffraction using Rietveld refinement methods. A single phase solid solution is formed up to x = 0.15 while for x ≥ 0.2 a manganese oxide phase appears in the diffraction pattern. Preferential cationic distribution between the non-equivalent sites 8b and 24d of space group Ia3{sup ¯} is found for all samples but to a different extent. The octahedral volume and average bond length of Er{sub 1}-O for 8b site decrease while both octahedral volume and bond length of Er{sub 2}-O for 24d site increase. Magnetization measurements were done in the temperature range 5–300 K. The effective magnetic moment μ{sub eff} is found to decrease with composition parameter x, except for sample x = 0.05 where the magnetization is enhanced. The Curie-Weiss paramagnetic temperatures indicate antiferromagnetic interaction.

36 MATERIALS SCIENCE↗

A comparative study of SrO and BaO doping to CeO{sub 2}-ZrO{sub 2}: Characteristic and its catalytic performance for three-way catalysts

Graphical abstract: Display Omitted Highlights: ► The prepared materials have a face-centered cubic structure and nanosize particles. ►Comparing to CZB, aged CZS has 494 μmol/g of OSC and 30 m{sup 2}/g of surface area. ► CZS and CZB have similar NO sorption and reductive properties and different H{sub 2} uptake. ► T{sub 50} of Pt-Rh/CZS/LA is as low as 199 °C for CO, 228 °C for NO, and 252 °C for C{sub 3}H{sub 8}. ► Pt-Rh/CZS/LA has wider working-window at 320 °C under different λ value. -- Abstract: Ceria-zirconia-strontia (Ce{sub 0.35}Zr{sub 0.55}Sr{sub 0.10}O{sub 1.9}) and ceria-zirconia-baria (Ce{sub 0.35}Zr{sub 0.55}Ba{sub 0.10}O{sub 1.9}) were synthesized using an oxidation-co-precipitation method with hydrogen peroxide (H{sub 2}O{sub 2}) as oxidant. The physical and chemical properties of the prepared materials were investigated using Brunauer–Emmett–Teller surface area characterization, transmission electron microscopy, X-ray diffraction, Raman spectra, X-ray photoelectron spectroscopy, and oxygen pulse reaction. The prepared materials were used in preparing three-way catalysts with low Pt and Rh content. Moreover, catalytic activities were evaluated at a fixed bed under a simulated gaseous mixture. The results are as follows: (1) the prepared materials have a face-centered cubic structure and are nano-sized; (2) aged Ce{sub 0.35}Zr{sub 0.55}Sr{sub 0.10}O{sub 1.9} has higher oxygen storage capacity (494 μmol/g), better thermal stability (30 m{sup 2}/g), good low-temperature reducibility, and high hydrogen uptake after TPR-redox cycles; (3) the light-off temperature (T{sub 50}) of Pt-Rh/CZS/LA can be as low as 199 °C for CO, 228 °C for NO, and 252 °C for C{sub 3}H{sub 8}; and (4) Pt-Rh/CZS/LA has a fairly wide working-window.

36 MATERIALS SCIENCE↗

Binary Heterogeneous Superlattices Assembled from Quantum Dots and Gold Nanoparticles with DNA

Controllable assembly of three-dimensional (3D) superlattices composed of different types of nanoscale objects opens new opportunities for material fabrication. Herein we show the successful assembly of heterogeneous 3D structures from gold nanoparticles (AuNPs) and quantum dots (QDs) using DNA encoding. By applying synchrotron-based small-angle X-ray scattering, we found that AuNPs and QDs are positioned in a body-centered cubic lattice, while each particle type, AuNP and QD, is arranged in a simple-cubic manner. Our studies demonstrate a route for assembly of integrated heterogeneous 3D structures from different nano-objects by DNA-encoded interactions.

59 BASIC BIOLOGICAL SCIENCES↗

Water dynamics in hydrated amorphous materials: a molecular dynamics study of the effects of dehydration in amorphous calcium carbonate

Amorphous calcium carbonate (ACC) is often a critical transient phase in the formation of crystalline phases of CaCO 3 via dehydration of hydrated ACC. The behavior of the water molecules plays a pivotal role in this transformation. We report here the dynamics of water molecules in ACC at hydration levels from CaCO 3 ·1H 2 O to CaCO 3 ·0.25H 2 O using molecular dynamics (MD) simulations. Due to the presence of highly hydrophilic Ca 2+ and the strong H-bond acceptor CO 3 2- , most of the water molecules in our simulations have restricted translational and orientational dynamics. These are referred here as ‘slow water’. However, a small fraction of them show high diffusivity at all hydration states and are referred here as ‘fast water’. The computed diffusion coefficients of the slow waters, as extrapolated from simulation results, yield diffusion distances of the order of μm on the 1 hour time scale, consistent with rapid dehydration of ACC nano-particles in the laboratory. We correlate our fast waters with the water molecules in the percolating water-rich, Ca 2+ -deficient nano-pores in the structure of Goodwin et al. [Chem. Mater., 2010, 22, 3197], obtained by analysis of X-ray scattering data, and our slow waters with those in the Ca 2+ -rich volumes with less water in their model. The fast waters can be considered to be free rotors on the ns time scale and have orders of magnitude shorter rotational relaxation times than the slow waters.

Saharay, Moumita↗

Gas phase formation of phenalene via 10π-aromatic, resonantly stabilized free radical intermediates

For the last few decades, the Hydrogen-Abstraction/aCetylene-Addition (HACA) mechanism has been fundamental in aiding our understanding of the source of polycyclic aromatic hydrocarbons (PAHs) in combustion processes and in circumstellar envelopes of carbon rich stars. However, the reaction mechanisms driving high temperature molecular mass growth beyond triphenylene (C 18 H 12 ) along with the link between PAHs and graphene-type nanostructures as identified in carbonaceous meteorites such as in Murchison and Allende has remained elusive. By exploring the reaction of the 1-naphthyl radical (C 10 H 7 ˙) with methylacetylene (CH 3 CCH) and allene (H 2 CCCH 2 ) under conditions prevalent in carbon-rich circumstellar environments and combustion systems, we provide compelling evidence on a facile formation of 1H-phenalene (C 13 H 10 ) – the central molecular building block of graphene-type nanostructures. Beyond PAHs, molecular mass growth processes from 1H-phenalene via ring-annulation through C3 molecular building blocks may ultimately lead to two-dimensional structures such as graphene nano flakes and after condensation of multiple layers to graphitized carbon. Furthermore, these fundamental reaction mechanisms are of crucial significance to facilitate an understanding of the origin and chemical evolution of carbon in our Galaxy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Femtosecond laser blackening of platinum

Using a femtosecond laser processing technique, we produce the black platinum with absorptance of about 95% over a broad wavelength range from ultraviolet to infrared. From scanning electron microscopy and energy dispersive x-ray spectroscopy studies, we find that the enhanced absorption of the black metal is due to a variety of nano- and microscale surface structures. Using a unique calorimetry technique, we perform a shot-to-shot comparison study of the metal absorption change in air and vacuum. Our study shows that the blackening process for platinum is more efficient in vacuum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ion irradiation induced structural and electrical transition in graphene

The relationship between the electrical properties and structure evolution of single layer graphene was studied by gradually introducing the gallium ion irradiation. Raman spectrums show a structural transition from nano-crystalline graphene to amorphous carbon as escalating the degree of disorder of the graphene sample, which is in correspondence with the electrical transition from a Boltzmann diffusion transport to a carrier hopping transport. The results show a controllable method to tune the properties of graphene.

36 MATERIALS SCIENCE↗

Nanotechnology finding its way into flame retardancy

Nanotechnology is one of the key technologies of the 21{sup st} century. The exploitation of 'new' effects that arise from materials structured on the nano-scale has also been proposed successfully for flame retardancy of polymers since the end of the 90s. Of all of the approaches these include, at this time the use of nanocomposites offers the best potential for industrial application, also some other ideas are sketched, such as using electrospun nanofibers mats or layer-by-layer deposits as protection coatings, as well as sub-micrometer multilayer coatings as effective IR-mirrors. The general phenomena, inducing a flow limit in the pyrolysing melt and changing the fire residue, are identified in nanocomposites. Key experiments are performed such as quasi online investigation of the protection layer formation to understand what is going on in detail. The flame retardancy mechanisms are discussed and their impact on fire behaviour quantified. With the latter, the presentation pushes forward the state of the art. For instance, the heat shielding is experimentally quantified for a layered silicate epoxy resin nanocomposite proving that it is the only import mechanism controlling the reduction in peak heat release rate in the investigated system for different irradiations. The flame retardancy performance is assessed comprehensively illuminating not only the strengths but also the weak points of the concepts. Guidelines for materials development are deduced and discussed. Apart from inorganic fillers (layered silicate, boehmite, etc.) not only carbon nanoobjects such as multiwall carbon nanotubes, multilayer graphene and graphene are investigated, but also nanoparticles that are more reactive and harbor the potential for more beneficial interactions with the polymer matrix.

36 MATERIALS SCIENCE↗

A qualitative study of spin polarization effect in defect tuned Co/graphene/Co nanostructures

Theoretical reports predict that in contact with a ferromagnetic giant spin, spin polarization evolves in defective graphene since defects in graphene act as local spin moments. We have synthesized different Co/graphene/Co nano spin valve like structures tuning the degree of defect applying ultrasonic vibration and characterized them by Raman spectroscopy. Initially with increasing I{sub D}/I{sub G} ratio in Raman spectra, antiferromagnetic coupling between the Co nanosheets on either sides of graphene enhances leading to betterment in spin transport through graphene. But for highest I{sub D}/I{sub G}, a totally new phenomenon called antiferro quadrupolar ordering (AFQ) takes place which eventually reduces the spin polarization effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coupling capacitance between double quantum dots tunable by the number of electrons in Si quantum dots

Tunability of capacitive coupling in the Si double-quantum-dot system is discussed by changing the number of electrons in quantum dots (QDs), in which the QDs are fabricated using pattern-dependent oxidation (PADOX) of a Si nanowire and multi-fine-gate structure. A single QD formed by PADOX is divided into multiple QDs by additional oxidation through the gap between the fine gates. When the number of electrons occupying the QDs is large, the coupling capacitance increases gradually and almost monotonically with the number of electrons. This phenomenon is attributed to the gradual growth in the effective QD size due to the increase in the number of electrons in the QDs. On the other hand, when the number of electrons changes in the few-electron regime, the coupling capacitance irregularly changes. This irregularity can be observed even up to 40 electrons. This behavior is attributable the rough structure of Si nano-dots made by PADOX. This roughness is thought to induce complicated change in the electron wave function when an electron is added to or subtracted from a QD.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Transparent conductor-embedding nanolens for Si solar cells

We present a large-scale applicable nanolens-embedding solar cell. An electrically conductive and optically transparent indium-tin-oxide (ITO) thin film was coated on a Si substrate. After then, periodically patterned ITO nanodome-arrays were formed on the ITO film by using a nano-imprint method. This structure is effective to reduce the incident light reflection for broad wavelengths and also efficient to drive the incident photons into a light-absorbing Si substrate. There exist two electric fields. One is by a p/n junction and the other is by the light absorption into Si. We designed nanolens structures to overlap two electric fields and demonstrate highly improved solar cell performances of current and voltage values from a planar structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tailoring oxides of copper-Cu{sub 2}O and CuO nanoparticles and evaluation of organic dyes degradation

We report a simple one-pot colloidal synthesis strategy tailoring cuprous or cupric nano-oxides in pure state. NaOH provided alkaline conditions (pH 12.5 -13) for nano-oxides formation, while its concentration regulated the oxidation state of the nano-oxides. The morphological, structural and optical properties of synthesized Cu{sub 2}O and CuO nanoparticles were studied by transmission electron microscopy (TEM), X-Ray diffraction (XRD) and UV-vis spectroscopy. Dye degradation capability of CuO and Cu2O nanoparticles was evaluated using four organic dyes - Malachite green, Methylene blue, Methyl orange and Methyl red. The results demonstrate effective degradation of all four dyes employing with almost comparable activity both Cu{sub 2}O and CuO nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced quantum yield of photoluminescent porous silicon prepared by supercritical drying

The effect of supercritical drying (SCD) on the preparation of porous silicon (pSi) powders has been investigated in terms of photoluminescence (PL) efficiency. Since the pSi contains closely spaced and possibly interconnected Si nanocrystals (<5 nm), pore collapse and morphological changes within the nanocrystalline structure after common drying processes can affect PL efficiency. We report the highly beneficial effects of using SCD for preparation of photoluminescent pSi powders. Significantly higher surface areas and pore volumes have been realized by utilizing SCD (with CO{sub 2} solvent) instead of air-drying. Correspondingly, the pSi powders better retain the porous structure and the nano-sized silicon grains, thus minimizing the formation of non-radiative defects during liquid evaporation (air drying). The SCD process also minimizes capillary-stress induced contact of neighboring nanocrystals, resulting in lower exciton migration levels within the network. A significant enhancement of the PL quantum yield (>32% at room temperature) has been achieved, prompting the need for further detailed studies to establish the dominant causes of such an improvement.

36 MATERIALS SCIENCE↗

Charge storage and tunneling mechanism of Ni nanocrystals embedded HfO{sub x} film

A nano-floating gate memory structure based on Ni nanocrystals (NCs) embedded HfO{sub x} film is deposited by means of radio-frequency magnetron sputtering. Microstructure investigations reveal that self-organized Ni-NCs with diameters of 4-8 nm are well dispersed in amorphous HfO{sub x} matrix. Pt/Ni-NCs embedded HfO{sub x}/Si/Ag capacitor structures exhibit voltage-dependent capacitance-voltage hysteresis, and a maximum flat-band voltage shift of 1.5 V, corresponding to a charge storage density of 6.0 × 10{sup 12} electrons/cm{sup 2}, is achieved. These capacitor memory cells exhibit good endurance characteristic up to 4 × 10{sup 4} cycles and excellent retention performance of 10{sup 5} s, fulfilling the requirements of next generation non-volatile memory devices. Schottky tunneling is proven to be responsible for electrons tunneling in these capacitors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Holographic grating relaxation technique for soft matter science

The holographic grating relaxation technique also known as forced Rayleigh scattering consists basically in writing a holographic grating in the specimen of interest and monitoring its diffraction efficiency as a function of time, from which valuable information on mass or heat transfer and photoinduced transformations can be extracted. In a more detailed view, the shape of the relaxation curve and the relaxation rate as a function of the grating period were found to be affected by the architecture of diffusing species (molecular probes) that constitute the grating, as well as that of the environment they diffuse in, thus making it possible to access and study spatial heterogeneity of materials and different modes of e.g., polymer motion. Minimum displacements and spatial domains approachable by the technique are in nanometer range, well below spatial periods of holographic gratings. In the present paper, several cases of holographic relaxation in heterogeneous media and complex motions are exemplified. Nano- to micro-structures or inhomogeneities comparable in spatial scale with holographic gratings manifest themselves in relaxation experiments via non-exponential decay (stepwise or stretched), spatial-period-dependent apparent diffusion coefficient, or unusual dependence of diffusion coefficient on molecular volume of diffusing probes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Light–matter interaction of a molecule in a dissipative cavity from first principles

Cavity-mediated light–matter coupling can dramatically alter opto-electronic and physico-chemical properties of a molecule. Ab initio theoretical predictions of these systems need to combine non-perturbative, many-body electronic structure theory-based methods with cavity quantum electrodynamics and theories of open-quantum systems. Here, we generalize quantum-electrodynamical density functional theory to account for dissipative dynamics of the cavity and describe coupled cavity–single molecule interactions in the weak-to-strong-coupling regimes. Specifically, to establish this generalized technique, we study excited-state dynamics and spectral responses of benzene and toluene under weak-to-strong light–matter coupling. By tuning the coupling, we achieve cavity-mediated energy transfer between electronically excited states. This generalized ab initio quantum-electrodynamical density functional theory treatment can be naturally extended to describe cavity-mediated interactions in arbitrary electromagnetic environments, accessing correlated light–matter observables and thereby closing the gap between electronic structure theory, quantum optics, and nanophotonics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic X-ray diffraction imaging of the ferroelectric response in bismuth ferrite

Abstract X-ray diffraction imaging is rapidly emerging as a powerful technique by which one can capture the local structure of crystalline materials at the nano- and meso-scale. Here, we present investigations of the dynamic structure of epitaxial monodomain BiFeO 3 thin-films using a novel full-field Bragg diffraction imaging modality. By taking advantage of the depth penetration of hard X-rays and their exquisite sensitivity to the atomic structure, we imaged in situ and in operando, the electric field-driven structural responses of buried BiFeO 3 epitaxial thin-films in micro-capacitor devices, with sub-100 nm lateral resolution. These imaging investigations were carried out at acquisition frame rates that reached up to 20 Hz and data transfer rates of 40 MB/s, while accessing diffraction contrast that is sensitive to the entire three-dimensional unit cell configuration. We mined these large datasets for material responses by employing matrix decomposition techniques, such as independent component analysis. We found that this statistical approach allows the extraction of the salient physical properties of the ferroelectric response of the material, such as coercive fields and transient spatiotemporal modulations in their piezoelectric response, and also facilitates their decoupling from extrinsic sources that are instrument specific.

36 MATERIALS SCIENCE↗