Search NASA⌕ Search

SEARCH · Search NASA

Results for “Processing maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

A vector scanning processing technique for pulsed laser velocimetry

Pulsed-laser-sheet velocimetry yields two-dimensional velocity vectors across an extended planar region of a flow. Current processing techniques offer high-precision (1-percent) velocity estimates, but can require hours of processing time on specialized array processors. Sometimes, however, a less accurate (about 5 percent) data-reduction technique which also gives unambiguous velocity vector information is acceptable. Here, a direct space-domain processing technique is described and shown to be far superior to previous methods in achieving these objectives. It uses a novel data coding and reduction technique and has no 180-deg directional ambiguity. A complex convection vortex flow was recorded and completely processed in under 2 min on an 80386-based PC, producing a two-dimensional velocity-vector map of the flowfield. Pulsed-laser velocimetry data can thus be reduced quickly and reasonably accurately, without specialized array processing hardware.

Wernet, Mark P.↗

Investigations of an urban area and its locale using ERTS-1 data supported by U-photography

An urban area in central Pennsylvania and the surrounding locality were investigated separately at first by photointerpretation of ERTS-1 imagery and by computer processing of MSS tapes. Next the photointerpretation and processing were coordinated. The results of the cooperative effort of photointerpreters and computer processing analysts were much improved over independent efforts. It was found that single frames of U-2 photography could be projected onto printer output maps with little recognizable distortion in areas 10 to 25 cm square. In this way targets could be identified for use as training areas for computer processed signature identification. In addition, at any stage of category mapping, the level of success in correct classification could be assessed by this method. The results of the classification of the study area are discussed.

Weeden, H. A.↗

Fusion Approach for Remotely-Sensed Mapping of Agriculture (FARMA): A Scalable Open Source Method for Land Cover Monitoring Using Data Fusion

The increasing availability of very-high resolution (VHR; <2 m) imagery has the potential to enable agricultural monitoring at increased resolution and cadence, particularly when used in combination with widely available moderate-resolution imagery. However, scaling limitations exist at the regional level due to big data volumes and processing constraints. Here, we demonstrate the Fusion Approach for Remotely-Sensed Mapping of Agriculture (FARMA), using a suite of open source software capable of efficiently characterizing time-series field-scale statistics across large geographical areas at VHR resolution. We provide distinct implementation examples in Vietnam and Senegal to demonstrate the approach using WorldView VHR optical, Sentinel-1 Synthetic Aperture Radar, and Sentinel-2 and Sentinel-3 optical imagery. This distributed software is open source and entirely scalable, enabling large area mapping even with modest computing power. FARMA provides the ability to extract and monitor sub-hectare fields with multisensor raster signals, which previously could only be achieved at scale with large computational resources. Implementing FARMA could enhance predictive yield models by delineating boundaries and tracking productivity of smallholder fields, enabling more precise food security observations in low and lower-middle income countries.

fusion↗

Space Weathering Maps of (101955) Bennu Using a Radiative Transfer Model

Space weathering is an important process that affects the surfaces of airless bodies, such as (101955) Bennu. The consequences of this process include physical and chemical changes to materials on the surface, which in turn change spectral characteristics, especially in the visible to near infrared wavelengths. These spectral changes are not the same across airless bodies because the changes are dependent on the composition and mineralogy of the surface and even location within the Solar System. The main space weathering products responsible for these spectral changes are submicroscopic particles, which consist of two types, nanophase and microphase particles, and affect visible to near-infrared reflectance spectra differently. Nanophase particles are particles <33 nm in size and occur in agglutinates and within glassy patinas around regolith particles. In contrast, microphase particles are >33 nm in size and are present only within agglutinates. These spectral differences are best illustrated by lunar samples. In lunar soils, the nanophase and microphase particles consist of metallic iron. With increasing abundance of nanophase iron particles in a regolith, its spectrum exhibits a lower overall reflectance in the visible to near infrared, weakened absorption bands, and a reddened continuum slope. In contrast, an increasing abundance of microphase iron only causes decreases in reflectance and not reddening. Because of the spectral differences introduced by these two types of particles, it is possible to model the nanophase and microphase particle abundances of a surface through the radiative transfer technique. Beyond the Moon, the composition of the nanophase and microphase particles can include other phases because the mineralogy of the surfaces of other planetary bodies is different. For example, the nanophase and microphase particles may consist of amorphous carbon (Mercury) and sulfides (Itokawa). The mineralogy of Bennu is consistent with carbonaceous chondrites. From a number of space weathering experiments on CM chondrites, the likely nanophase and microphase mineral phases on Bennu includes iron, magnetite, and sulfides (i.e., pentlandite and troilite). The goal of this work is to input the predicted nanophase and microphase compositions for Bennu into the radiative transfer technique. Next, we use this technique to model the OSIRIS-REx Visible Infrared Spectrometer (OVIRS) so that we can model the nanophase and microphase particle abundances across the surface. This will result in space weathering maps of the surface of Bennu, which are useful for understanding the degree of space weathering across the surface and its relationship to various regions and geological features.

Trang, D.↗

Sea surface topography fields of the tropical Pacific from data assimilation

Time series of maps of monthly tropical Pacific dynamic topography anomalies from 1979 through 1985 were constructed by means of assimilation of the tide gauge and expendable bathythermograph (XBT) data into a linear model driven by observed winds. Estimates of error statistics were calculated and compared to actual differences between hindcasts and observations. Four experiements were performed as follows: one with no assimilation, one with assimiation of sea level anomaly data from eight selected island tide gauge stations, one with assimilation of dynamic height anomalies derived from XBT data, and one with both XBT and tide gauge data assimilated. Data from seven additional tide gauge stations were withheld from the assimilation process and used for verification in all four experiements. Statistical objective maps based on data alone were also constructed for comparison purposes. The dynamic response of the model without assimilation was, in general, weaker than the observed response. Assimilation resulted in enhanced signal amplitude in all three assimilation experiments. With few exceptions the error estimated generated by the Kalman filter appeared quite reasonable. Since the error processes cannot be assumed to be white or stationary, we could find no straightforward way to test the formal statistical hypothesis that the time series of differences between the filter ouput and the actual observations were drawn from a population with statistics given by the Kalman filter estimaes. We found that the best filter we could devise was still short of the goal of producing a white innovation sequence. Extensive changes in the assumed error statistics make only marginal differences. The same is true for long time and space scale behavior of different models with richer physics and finer resolution. Better data assimilation results will probably require relaxation of the assumptions of stationarity and serial independence of the errors. Formation of such detailed noise models will require longer time series, with the attendant problems of matching very different data sets.

Miller, Robert N.↗

Processing Satellite Imagery To Detect Waste Tire Piles

A methodology for processing commercially available satellite spectral imagery has been developed to enable identification and mapping of waste tire piles in California. The California Integrated Waste Management Board initiated the project and provided funding for the method s development. The methodology includes the use of a combination of previously commercially available image-processing and georeferencing software used to develop a model that specifically distinguishes between tire piles and other objects. The methodology reduces the time that must be spent to initially survey a region for tire sites, thereby increasing inspectors and managers time available for remediation of the sites. Remediation is needed because millions of used tires are discarded every year, waste tire piles pose fire hazards, and mosquitoes often breed in water trapped in tires. It should be possible to adapt the methodology to regions outside California by modifying some of the algorithms implemented in the software to account for geographic differences in spectral characteristics associated with terrain and climate. The task of identifying tire piles in satellite imagery is uniquely challenging because of their low reflectance levels: Tires tend to be spectrally confused with shadows and deep water, both of which reflect little light to satellite-borne imaging systems. In this methodology, the challenge is met, in part, by use of software that implements the Tire Identification from Reflectance (TIRe) model. The development of the TIRe model included incorporation of lessons learned in previous research on the detection and mapping of tire piles by use of manual/ visual and/or computational analysis of aerial and satellite imagery. The TIRe model is a computational model for identifying tire piles and discriminating between tire piles and other objects. The input to the TIRe model is the georeferenced but otherwise raw satellite spectral images of a geographic region to be surveyed. The TIRe model identifies the darkest objects in the images and, on the basis of spatial and spectral image characteristics, discriminates against other dark objects, which can include vegetation, some bodies of water, and dark soils. The TIRe model can identify piles of as few as 100 tires. The output of the TIRe model is a binary mask showing areas containing suspected tire piles and spectrally similar features. This mask is overlaid on the original satellite imagery and examined by a trained image analyst, who strives to further discriminate against non-tire objects that the TIRe model tentatively identified as tire piles. After the analyst has made adjustments, the mask is used to create a synoptic, geographically accurate tire-pile survey map, which can be overlaid with a road map and/or any other map or set of georeferenced data, according to a customer s preferences.

Skiles, Joseph↗

"Active" and "Passive" Lava Resurfacing Processes on Io: A Comparative Study of Loki Patera and Prometheus

Studies of Galileo Near Infrared Mapping Spectrometer (NIMS) data and ground based data of volcanism at Prometheus and Loki Patera on Io reveal very different mechanisms of lava emplacement at these two volcanoes. Data analyses show that the periodic nature of Loki Patera s volcanism from 1990 to 2001 is strong evidence that Loki s resurfacing over this period resulted from the foundering of a crust on a lava lake. This process is designated passive , as there is no reliance on sub-surface processes: the foundering of the crust is inevitable. Prometheus, on the other hand, displays an episodicity in its activity which we designate active . Like Kilauea, a close analog, Prometheus s effusive volcanism is dominated by pulses of magma through the nearsurface plumbing system. Each system affords views of lava resurfacing processes through modelling.

Davies, A. G.↗

Evaluation of iconic versus F-map microburst displays

Previous studies have shown graphical presentation methods of hazardous wind shear to be superior to textual or audible warnings alone. Positional information and the strength of the hazard were observed to be and were cited by pilots as the most important factors in a display. In this experiment the use of the three different graphical presentations of hazardous wind shear are examined. Airborne predictive detectors of wind shear enable the dissemination of varying levels of information. The effectiveness of iconic and mapping display modes of different complexities are addressed through simulation and analysis. Different positional and time-varying situations are presented in a 'part-task' Boeing 767 simulator using data from actual microburst events. Experienced airline pilots fly approach profiles using both iconic and F-map wind shear alerting displays. Microburst accompanied each event is also shown to the pilot. Mapping display types are expected to be found exceptionally efficient at conveying location comparison information while iconic displays simplify the threat recognition process. Preliminary results from the simulator study are presented. Recommendations concerning the suitability of multilevel iconic and mapping displays are made. Situational problems with current display prototypes are also addressed.

Salzberger, Mark↗

The TOPSAR interferometric radar topographic mapping instrument

The NASA DC-8 AIRSAR instrument was augmented with a pair of C-band antennas displaced across track to form an interferometer sensitive to topographic variations of the Earth's surface. The antennas were developed by the Italian consortium Co.Ri.S.T.A., under contract to the Italian Space Agency (ASI), while the AIRSAR instrument and modifications to it supporting TOPSAR were sponsored by NASA. A new data processor was developed at JPL for producing the topographic maps, and a second processor was developed at Co.Ri.S.T.A. All the results presented below were processed at JPL. During the 1991 DC-8 flight campaign, data were acquired over several sites in the United States and Europe, and topographic maps were produced from several of these flight lines. Analysis of the results indicate that statistical errors are in the 2-3 m range for flat terrain and in the 4-5 m range for mountainous areas.

Zebker, Howard A.↗

Quantifying Earth System Interactions for Sustainable Food Production Via Expert Elicitation

Several safe boundaries of critical Earth system processes have already been crossed due to human perturbations; not accounting for their interactions may further narrow the safe operating space for humanity. Using expert knowledge elicitation, we explored interactions among seven variables representing Earth system processes relevant to food production, identifying many interactions little explored in Earth system literature. We found that green water and land system change affect other Earth system processes strongly, while land, freshwater and ocean components of biosphere integrity are the most impacted by other Earth system processes, most notably blue water and biogeochemical flows. We also mapped a complex network of mechanisms mediating these interactions and created a future research prioritization scheme based on interaction strengths and existing knowledge gaps. Our study improves the understanding of Earth system interactions, with sustainability implications including improved Earth system modelling and more explicit biophysical limits for future food production.

Expert knowledge elicitation↗

Mapping sea ice leads with a coupled numeric/symbolic system

A method is presented which facilitates the detection and delineation of leads with single-channel Landsat data by coupling numeric and symbolic procedures. The procedure consists of three steps: (1) using the dynamic threshold method, an image is mapped to a lead/no lead binary image; (2) the likelihood of fragments to be real leads is examined with a set of numeric rules; and (3) pairs of objects are examined geometrically and merged where possible. The processing ends when all fragments are merged and statistical characteristics are determined, and a map of valid lead objects are left which summarizes useful physical in the lead complexes. Direct implementation of domain knowledge and rapid prototyping are two benefits of the rule-based system. The approach is found to be more successfully applied to mid- and high-level processing, and the system can retrieve statistics about sea-ice leads as well as detect the leads.

Key, J.↗

Mechanisms of microgravity flame spread over a thin solid fuel - Oxygen and opposed flow effects

Microgravity tests varying oxygen concentration and forced flow velocity have examined the importance of transport processes on flame spread over very thin solid fuels. Flame spread rates, solid phase temperature profiles and flame appearance for these tests are measured. A flame spread map is presented which indicates three distinct regions where different mechanisms control the flame spread process. In the near-quenching region (very low characteristic relative velocities) a new controlling mechanism for flame spread - oxidizer transport-limited chemical reaction - is proposed. In the near-limit, blowoff region, high opposed flow velocities impose residence time limitations on the flame spread process. A critical characteristic relative velocity line between the two near-limit regions defines conditions which result in maximum flammability both in terms of a peak flame spread rate and minimum oxygen concentration for steady burning. In the third region, away from both near-limit regions, the flame spread behavior, which can accurately be described by a thermal theory, is controlled by gas-phase conduction.

Olson, S. L.↗

Land resources survey for the state of Michigan

The usefulness of ERTS-1 satellite imagery as an information source for a statewide inventory of Michigan's land resources is documented. The project is currently relying on photointerpretation of MSS photography and computed processed results. The first task completed was a 1:500,000 scale land use map of the state in four classes: urban, forest, water, and agriculture and other. This map was constructed from existing (pre-ERTS-1) information sources including federal, state and county maps, and aerial photography. An ERTS color IR photomosaic for the entire state will also be constructed at a scale of 1:250,000. The Institute is currently working on tape processed data that will include both recognition data as well as a UTM coordinate addressing capability so that the final tape can be inputed directly into computerized land use and transportation corridor analysis models.

Sellman, B.↗

Optimal mapping of irregular finite element domains to parallel processors

Mapping the solution domain of n-finite elements into N-subdomains that may be processed in parallel by N-processors is an optimal one if the subdomain decomposition results in a well-balanced workload distribution among the processors. The problem is discussed in the context of irregular finite element domains as an important aspect of the efficient utilization of the capabilities of emerging multiprocessor computers. Finding the optimal mapping is an intractable combinatorial optimization problem, for which a satisfactory approximate solution is obtained here by analogy to a method used in statistical mechanics for simulating the annealing process in solids. The simulated annealing analogy and algorithm are described, and numerical results are given for mapping an irregular two-dimensional finite element domain containing a singularity onto the Hypercube computer.

Flower, J.↗

NASA Tech Briefs, April 2010

Topics covered include: Active and Passive Hybrid Sensor; Quick-Response Thermal Actuator for Use as a Heat Switch; System for Hydrogen Sensing; Method for Detecting Perlite Compaction in Large Cryogenic Tanks; Using Thin-Film Thermometers as Heaters in Thermal Control Applications; Directional Spherical Cherenkov Detector; AlGaN Ultraviolet Detectors for Dual-Band UV Detection; K-Band Traveling-Wave Tube Amplifier; Simplified Load-Following Control for a Fuel Cell System; Modified Phase-meter for a Heterodyne Laser Interferometer; Loosely Coupled GPS-Aided Inertial Navigation System for Range Safety; Sideband-Separating, Millimeter-Wave Heterodyne Receiver; Coaxial Propellant Injectors With Faceplate Annulus Control; Adaptable Diffraction Gratings With Wavefront Transformation; Optimizing a Laser Process for Making Carbon Nanotubes; Thermogravimetric Analysis of Single-Wall Carbon Nanotubes; Robotic Arm Comprising Two Bending Segments; Magnetostrictive Brake; Low-Friction, Low-Profile, High-Moment Two-Axis Joint; Foil Gas Thrust Bearings for High-Speed Turbomachinery; Miniature Multi-Axis Mechanism for Hand Controllers; Digitally Enhanced Heterodyne Interferometry; Focusing Light Beams To Improve Atomic-Vapor Optical Buffers; Landmark Detection in Orbital Images Using Salience Histograms; Efficient Bit-to-Symbol Likelihood Mappings; Capacity Maximizing Constellations; Natural-Language Parser for PBEM; Policy Process Editor for P(sup 3)BM Software; A Quality System Database; Trajectory Optimization: OTIS 4; and Computer Software Configuration Item-Specific Flight Software Image Transfer Script Generator.

Source record↗

MIDAS prototype Multispectral Interactive Digital Analysis System for large area earth resources surveys. Volume 2: Charge coupled device investigation

MIDAS is a third-generation, fast, low cost, multispectral recognition system able to keep pace with the large quantity and high rates of data acquisition from large regions with present and projected sensors. MIDAS, for example, can process a complete ERTS frame in forty seconds and provide a color map of sixteen constituent categories in a few minutes. A principal objective of the MIDAS Program is to provide a system well interfaced with the human operator and thus to obtain large overall reductions in turn-around time and significant gains in throughput. The need for advanced onboard spacecraft processing of remotely sensed data is stated and approaches to this problem are described which are feasible through the use of charge coupled devices. Tentative mechanizations for the required processing operations are given in large block form. These initial designs can serve as a guide to circuit/system designers.

Kriegler, F.↗

Application of a computerized environmental information system to master and sector planning

A computerized composite mapping system developed as an aid in the land use decision making process is described. Emphasis is placed on consideration of the environment in urban planning. The presence of alluvium, shallow bedrock, surface water, and vegetation growth are among the environmental factors considered. An analysis of the Shady Grove Sector planning is presented as an example of the use of computerized composite mapping for long range planning.

Stewart, J. C.↗

Onboard Processing of Multispectral and Hyperspectral Data of Volcanic Activity for Future Earth-Orbiting and Planetary Missions

Autonomous onboard processing of data allows rapid response to detections of dynamic, changing processes. Software that can detect volcanic eruptions from thermal emission has been used to retask the Earth Observing 1 spacecraft to obtain additional data of the eruption. Rapid transmission of these data to the ground, and the automatic processing of the data to generated images, estimates of eruption parameters and maps of thermal structure, has allowed these products to be delivered rapidly to volcanologists to aid them in assessing eruption risk and hazard. Such applications will enhance science return from future Earth-orbiting spacecraft and also from spacecraft exploring the Solar System, or beyond, which hope to image dynamic processes. Especially in the latter case, long communication times between the spacecraft and Earth exclude a rapid response to what may be a transient process - only using onboard autonomy can the spacecraft react quickly to such an event.

Jupiter↗