Search NASA⌕ Search

SEARCH · Search NASA

Results for “RESISTANCE DEVICE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Hygrothermal aging and recycling effects on mechanical and thermal properties of recyclable thermoplastic glass fiber composites

Abstract Glass fiber‐reinforced polymer composites are widely used in marine applications, including renewable energy devices and submarines, due to their strength‐to‐weight ratios and corrosion resistance. As sustainability becomes more important, recyclable thermoplastic composites are gaining attention in marine energy applications. These materials face harsh conditions such as high chloride water, UV radiation, pressurization, and thermal cycling, which can affect their durability and recyclability. This study examines the impact of hygrothermal aging on the recyclability of an Elium glass fiber (GF) composite. Samples were mechanically ground for recycling, and mechanical and thermal properties were compared between aged and unaged samples. After seawater aging, the tensile strength and modulus of the unaged composite dropped by 25% and 13% respectively, due to water ingress along the fiber‐matrix interface. The recycled composite showed reduced flexural strength as the long fiber composite was converted into short fibers during the process. Differential scanning calorimetry (DSC) revealed no change in glass transition temperature after aging. Weight loss (25%) was attributed to the thermal stability of the glass fibers. Dynamic mechanical analysis (DMA) showed that the storage modulus increased with aging, and fracture analysis confirmed a mixed mode of failure for aged composites. Highlights Hygrothermal aging lowers mechanical performance of Elium® GF composites. Failure mechanism tends to be matrix cracking and interface bonding. Glass transition temperature is not reduced by hygrothermal aging. Fractured composite was successfully recycled via thermoforming. Flexural strength of the recycled composite is lower.

17 WIND ENERGY↗

High-throughput screening of 2D materials identifies p-type monolayer WS2 as potential ultra-high mobility semiconductor

Abstract 2D semiconductors offer a promising pathway to replace silicon in next-generation electronics. Among their many advantages, 2D materials possess atomically-sharp surfaces and enable scaling the channel thickness down to the monolayer limit. However, these materials exhibit comparatively lower charge carrier mobility and higher contact resistance than 3D semiconductors, making it challenging to realize high-performance devices at scale. In this work, we search for high-mobility 2D materials by combining a high-throughput screening strategy with state-of-the-art calculations based on the ab initio Boltzmann transport equation. Our analysis singles out a known transition metal dichalcogenide, monolayer WS 2 , as the most promising 2D semiconductor, with the potential to reach ultra-high room-temperature hole mobilities in excess of 1300 cm 2 /Vs should Ohmic contacts and low defect densities be achieved. Our work also highlights the importance of performing full-blown ab initio transport calculations to achieve predictive accuracy, including spin–orbital couplings, quasiparticle corrections, dipole and quadrupole long-range electron–phonon interactions, as well as scattering by point defects and extended defects.

Chemistry↗

Off-axis fishbone-like instability and excitation of resistive wall modes in JT-60U and DIII-D

An energetic-particle (EP)-driven ''off-axis-fishbone-like mode (OFM)'' often triggers a resistive wall mode (RWM) in JT-60U and DIII-D devices, preventing long-duration high-{beta}{sub N} discharges. In these experiments, the EPs are energetic ions (70-85 keV) injected by neutral beams to produce high-pressure plasmas. EP-driven bursting events reduce the EP density and the plasma rotation simultaneously. These changes are significant in high-{beta}{sub N} low-rotation plasmas, where the RWM stability is predicted to be strongly influenced by the EP precession drift resonance and by the plasma rotation near the q=2 surface (kinetic effects). Analysis of these effects on stability with a self-consistent perturbation to the mode structure using the MARS-K code showed that the impact of EP losses and rotation drop is sufficient to destabilize the RWM in low-rotation plasmas, when the plasma rotation normalized by Alfven frequency is only a few tenths of a percent near the q=2 surface. The OFM characteristics are very similar in JT-60U and DIII-D, including nonlinear mode evolution. The modes grow initially like a classical fishbone, and then the mode structure becomes strongly distorted. The dynamic response of the OFM to an applied n=1 external field indicates that the mode retains its external kink character. These comparative studies suggest that an energetic particle-driven 'off-axis-fishbone-like mode' is a new EP-driven branch of the external kink mode in wall-stabilized plasmas, analogous to the relationship of the classical fishbone branch to the internal kink mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MD simulations of resistive cooling in HITRAP using GPUs

In the HITRAP facility at GSI it is planned to store 10{sup 5} highly charged ions up to U{sup 92+} in a cryogenic Penning trap and cool them down to 4 K via electron and resistive cooling. During the cooling process the ion density increases and the characteristics of the ion cloud are increasingly determined by Coulomb interactions. We present a parallel algorithm for the simulation of the resistive cooling for ion clouds in cylindrical Penning traps. For the simulation of the resistive cooling we run an Open Cl code on a single GPU device.

43 PARTICLE ACCELERATORS↗

Negative differential resistance phenomena in colloidal quantum dots-based organic light-emitting diodes

The influence of ligands on the electrical behavior of CdSe/ZnS core-shell colloidal quantum dots (CQDs)-based organic light-emitting diodes is presented. Negative differential resistance (NDR) phenomena at room temperature are observed from single-layer device ITO/poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS)/CQDs/Al in which the original capping ligand tri-n-octylphosphine oxide (TOPO) of CQDs is exchanged with oleylamine, as well as in both bilayer device ITO/PEDOT:PSS/CQDs/BCP(10 nm)/Al and trilayer device ITO/PEDOT:PSS/CQDs/BCP(10 nm)/Alq{sub 3}(10 nm)/Al. However, such a kind of NDR phenomenon disappears if TOPO is exchanged with hexadecylamine. Therefore, NDR phenomenon depends greatly on the ligands of the CQDs, and the origin of NDR from these devices is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

White organic light-emitting diodes with 4 nm metal electrode

We investigate metal layers with a thickness of only a few nanometers as anode replacement for indium tin oxide (ITO) in white organic light-emitting diodes (OLEDs). The ultrathin metal electrodes prove to be an excellent alternative that can, with regard to the angular dependence and efficiency of the OLED devices, outperform the ITO reference. Furthermore, unlike ITO, the thin composite metal electrodes are readily compatible with demanding architectures (e.g., top-emission or transparent OLEDs, device unit stacking, etc.) and flexible substrates. Here, we compare the sheet resistance of both types of electrodes on polyethylene terephthalate for different bending radii. The electrical performance of ITO breaks down at a radius of 10 mm, while the metal electrode remains intact even at radii smaller than 1 mm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Single-event burnout in homojunction GaN vertical PiN diodes with hybrid edge termination design

GaN devices play a major role in modern electronics, providing high-power handling, efficient high-frequency operation, and resilience in harsh environments. However, electric field crowding at the edge of the anode often limits its full potential, leading to single-event effects (SEEs) at lower bias voltages under heavy ion radiation. Here, in this work, we report on the performance of homojunction GaN vertical PiN diodes with a hybrid edge termination design under heavy ion irradiation, specifically, oxygen ions, chlorine ions, Cf-252 fission fragments, and alpha particles from an Am-241 source. The unique hybrid edge termination (HET) design provides better electric field management, preventing breakdown from occurring at the edge of the anode at lower voltages. The results of this study reveal that these devices exhibit excellent tolerance to 12-MeV oxygen and 16-MeV chlorine ions, owing to their low linear energy transfer (LET) and range in GaN. However, single-event burnout (SEB) is observed during the Cf-252 exposure at about 50% of the diodes' electrical breakdown voltage due to the presence of higher LET and longer-range ions. Optical and scanning electron microscopy (SEM) reveal that the damage that caused by SEB lies close to the center of these devices rather than the anode edge. Devices with junction termination extension (JTE) instead of HET edge termination also show similar SEB when irradiated with Cf-252 fission fragments. Physical damage due to SEB occurs at the edge of the anode for these devices. These comparative results show the benefits of HET for enhancing the resistance of GaN-based PiN diodes to heavy ion irradiation.

42 ENGINEERING↗

A Survey of Software Techniques for Using Non-Volatile Memories for Storage and Main Memory Systems

Non-volatile memory (NVM) devices, such as Flash, phase change RAM, spin transfer torque RAM, and resistive RAM, offer several advantages and challenges when compared to conventional memory technologies, such as DRAM and magnetic hard disk drives (HDDs). Here, we present a survey of software techniques that have been proposed to exploit the advantages and mitigate the disadvantages of NVMs when used for designing memory systems, and, in particular, secondary storage (e.g., solid state drive) and main memory. Furthermore, we classify these software techniques along several dimensions to highlight their similarities and differences. Given that NVMs are growing in popularity, we believe that this survey will motivate further research in the field of software technology for NVMs.

97 MATHEMATICS AND COMPUTING↗

Liquid-Cooled Heat Sink Optimization for Thermal Imbalance Mitigation in Wide-Bandgap Power Modules

Power semiconductor die placement on substrates used in high-power modules is generally optimized to minimize electrical parasitic (e.g., stray inductance, common-mode capacitance), taking into account the minimum spacing between semiconductor dies for thermal decoupling. The layout assumes sufficient heat spreading and transfer from dies to the cooling structure. Insulated metal substrate-based power module designs may lead to asymmetrical thermal resistance across the dies, which may cause significant temperature differences among the devices. Such unintentional thermal asymmetries can lead to oversizing the cooling system design or underusing the semiconductor power processing capability. This article proposes a thermal imbalance mitigation method that uses evolutionary optimized liquid-cooled heat sinks to improve the thermal loading among devices.

42 ENGINEERING↗

A CMOS Compatible, Forming Free TaO x ReRAM

Resistive random access memory (ReRAM) has become a promising candidate for next-generation high-performance non-volatile memory that operates by electrically tuning resistance states via modulating vacancy concentrations. Here, we demonstrate a wafer-scale process for resistive switching in tantalum oxide that is completely CMOS compatible. The resulting devices are forming-free and with greater than 1x10 5 cycle endurance.

97 MATHEMATICS AND COMPUTING↗

Quench Propagation On Rare-Earth Barium Copper Oxide (REBCO) Tape

Rare-earth barium copper oxide (REBCO) high-temperature superconductors can carry high currents with zero electrical resistance, enabling applications in high-field magnets, energy systems, and fusion devices. However, localized losses of superconductivity, known as quenches, pose a severe risk due to REBCO’s mechanical brittleness and slow quench propagation, complicating early detection. This work investigates quench propagation and thermal response through controlled experiments. A segmented REBCO tape soldered onto a printed circuit board (PCB) with multiple voltage taps and temperature sensors was submerged in liquid nitrogen at 77 K. In the first test, current ramping produced a quench near 360 A, consistent with theoretical current limits, but resulted in local burnout. In the second test, a heater-induced quench at 300 A propagated bidirectionally with velocities ranging from 164–226 mm/s. These results provide critical parameters for improving REBCO quench detection and protection system design while accounting for REBCO’s limited bendability.

Ju, Han [Northern Illinois U.]↗

Quench Propagation on Rare-Earth Barium Copper Oxide (REBCO) Tape

Rare-earth barium copper oxide (REBCO) high-temperature superconductors can carry high currents with zero electrical resistance, enabling applications in high-field magnets, energy systems, and fusion devices. However, the localized losses of superconductivity called a quench pose a severe risk due to REBCO’s mechanical brittleness and slow quench propagation, hence complicating early detection. This work investigates quench propagation and thermal response through controlled experiments. A segmented REBCO tape soldered on a PCB with multiple voltage taps and temperature sensors was submerged in liquid nitrogen at 77 K. In the first test, current ramping produced a quench near 360 A, consistent with theoretical current limits but resulted in a local burn. In the second test, a heater-induced quench at 300 A propagated bidirectionally with measured velocities ranging from 164–226 mm/s. These measurements provide critical parameters for improving REBCO quench detection and protection system design with accounts for REBCO's limited bendability.

Ju, Han [NIU, DeKalb]↗

Severe accident: hardening of standards and qualification requirements for nuclear pressure transmitters - 319

Nuclear power stations are designed according to the nuclear safety principle: the achievement of proper operating conditions, prevention of accidents or mitigation of accident consequences, resulting in protection of workers, the public and the environment from undue radiation hazards. This principle is applicable from the design to the dismantling of the power station, including normal and accident (and post-accident) operation. To take into account the world experience (incident or accident as Fukushima), international safety authorities recommends to reinforce safety functions and qualification requirements level. Concerning the instrumentation, devices like sensors are mainly impacted by the following constraint improvements: - Radiation resistance in normal and accident conditions: - Higher total dose; - Dose Rate; - Nature of radiation; - Pressure and Temperature profile in terms of: - Magnitude of pressure and / or temperature (higher); - Duration of higher constraints (longer). All these specifications induce: - The creation of a new qualification level - Severe Accident (SA) or equivalent; - An impact on the sensor technology to improve the resistance to harsh environment. Finally, the paper will present in details the evolution of the requirements and will sum up the advantages and disadvantages of different technologies to meet the severe accident conditions. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Shot noise detection in hBN-based tunnel junctions

High quality Au/hBN/Au tunnel devices are fabricated using transferred atomically thin hexagonal boron nitride as the tunneling barrier. All tunnel junctions show tunneling resistance on the order of several kX/lm2. Ohmic I-V curves at small bias with no signs of resonances indicate the sparsity of defects. Tunneling current shot noise is measured in these devices, and the excess shot noise shows consistency with theoretical expectations. Furthermore, these results show that atomically thin hBN is an excellent tunnel barrier, especially for the study of shot noise properties, and this can enable the study of the tunneling density of states and shot noise spectroscopy in more complex systems.

42 ENGINEERING↗

Tuning negative differential resistance in single-atomic layer boron-silicon sheets

Using density functional theory and nonequilibrium Green's function formalism for quantum transport calculation, we have quantified the ballistic transport properties along different directions in two-dimensional boron-silicon (B-Si) compounds, as well as the current response to bias voltage. The conductance of the most B-Si devices is higher than the conductance of one-atom-thick boron and silicene. Furthermore, the negative differential resistance phenomenon can be found at certain B-Si stoichiometric composition, and it occurs at various bias voltages. Also, the peak-to-valley ratio is sensitive to the B-Si composition and dependent of the direction considered for B-Si monolayers. The present findings could be helpful for applications of the single-atomic layer B-Si sheets in the field of semiconductor devices or low-dimensional electronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shape Anisotropy-Dependent Leaking in Magnetic Neurons for Bio-Mimetic Neuromorphic Computing

Spiking neural networks seek to emulate biological computation through interconnected artificial neuron and synapse devices. Spintronic neurons can leverage magnetization physics to mimic biological neuron functions, such as integration tied to magnetic domain wall (DW) propagation in a patterned nanotrack and firing tied to the resistance change of a magnetic tunnel junction (MTJ), captured in the domain wall-magnetic tunnel junction (DW-MTJ) device. Leaking, relaxation of a neuron when it is not under stimulation, is also predicted to be implemented based on DW drift as a DW relaxes to a low energy position, but it has not been well explored or demonstrated in device prototypes. Here, in this work, we study DW-MTJ artificial neurons capable of leaky integrate-and-fire (LIF) behavior and demonstrate geometry-dependent leaking dynamics that results in repeatable, tunable LIF operation. Studying the behavior of five different device designs, we show tuning the geometry, stimulating fields and currents, and location of electrical contacts results in a wide range of neuron behavior. Additionally, implementation of an asymmetric notch allows for nonlinear pinning which increased expressivity without sacrificing leaking. The measured behavior is implemented in a simulated spiking neural network that outperforms a 1D model of continuous DW motion and approaches the performance of an ideal LIF activation function. The results show that the analog LIF capability of DW-MTJ neurons combines many desirable neuron functions into a single device, which can result in varied forms of multifunctional neuromorphic computing.

42 ENGINEERING↗

Formation of Ultra-Shallow Junctions by Advanced Plasma Doping Techniques

The fabrication of advanced CMOS devices calls for production worthy doping solutions to address requirements for increasingly shallow and abrupt junctions, while maintaining high dopant activation to meet series resistance requirements. Plasma Doping (PLAD), which has already been adopted in high volume manufacturing in the ultra high dose, low energy regime for advanced DRAM technology nodes, is now being investigated for source drain extension (SDE) implants, where precise and repeatable dopant placement is critical for maintaining control over device parameters. In this article, we investigate the process performance of SDE implants carried out in a VIISta registered PLAD system using p- type dopant precursors. Key metrics, such as junction depth, profile abruptness and sheet resistance are reported for as-implanted junctions, as well as samples processed with low thermal budget anneal techniques. Device performance data demonstrating the feasibility of the approach are presented. The advanced control features in the PLAD system are critical in enabling the process performance required for SDE implants.

36 MATERIALS SCIENCE↗

Thermal and Thermomechanical Modeling to Design a Gallium Oxide Power Electronics Package: Preprint

The power electronics industry is currently undergoing a major transition by replacing silicon devices with wide-bandgap devices. Gallium oxide devices have the potential to accelerate this transition by offering comparable or even superior performance to other wide-bandgap devices, but at a much lower cost. Recent breakthroughs include demonstration of a laboratory-scale gallium oxide transistors and diodes; however, a functional power electronics package for these devices is yet to be developed. In this paper, the research methodology in designing an electronics package for gallium oxide devices is outlined. Finite element-based thermal and thermomechanical modeling simulations were conducted to realize a package design that meets the combined target of minimal thermal resistance and improved reliability. Different package designs that include various material combinations and cooling configurations were explored, and their thermal and thermomechanical performance are reported. Furthermore, the short-circuit withstanding capabilities of gallium oxide devices were studied and compared with silicon carbide.

30 DIRECT ENERGY CONVERSION↗