Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reservoir Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

The National Risk Assessment Partnership’s integrated assessment model for carbon storage: A tool to support decision making amidst uncertainty

The US DOE-funded National Risk Assessment Partnership (NRAP) has developed an integrated assessment model (NRAP-IAM-CS) that can be used to simulate carbon dioxide (CO 2 ) injection, migration, and associated impacts at a geologic carbon storage site. The model, NRAP-IAM-CS, incorporates a system-modeling-based approach while taking into account the full subsurface system from the storage reservoir to groundwater aquifers and the atmosphere. The approach utilizes reduced order models (ROMs) that allow fast computations of entire system performance even for periods of hundreds to thousands of years. The ROMs are run in Monte Carlo mode allowing estimation of uncertainties of the entire system without requiring long computational times. The NRAP-IAM-CS incorporates ROMs that realistically represent several key processes and properties of storage reservoirs, wells, seals, and groundwater aquifers. Results from the NRAP-IAM-CS model are used to quantify risk profiles for selected parameter distributions of reservoir properties, seal properties, numbers of wells, well properties, thief zones, and groundwater aquifer properties. A series of examples is used to illustrate how the risk under different storage conditions evolves over time, both during injection, in the near-term post injection period, and over the long term. Finally, it is also shown how results from NRAP-IAM-CS can be used to investigate the importance of different parameters on risk of leakage and risk of groundwater contamination under different storage conditions.

54 ENVIRONMENTAL SCIENCES↗

mosartwmpy: A Python implementation of the MOSART-WM coupled hydrologic routing and water management model

mosartwmpy is a Python implementation of the Model for Scale Adaptive River Transport with Water Management (MOSART-WM). This new version retains the functionality of the legacy model (written in FORTRAN) while providing new features to enhance user experience and extensibility. MOSART is a large-scale river-routing model used to study riverine dynamics of water, energy, and biogeochemistry cycles across local, regional, and global scales (Li et al., 2013). The WM component introduced by Voisin et al. (2013) represents river regulation through reservoir storage and release operations, diversions from reservoir releases, and allocation to sectoral water demands. Each reservoir release is independently calibrated using long-term mean monthly inflow into the reservoir, long-term mean monthly demand associated with this reservoir, and reservoir goals (flood control, irrigation, recreation, etc.). Generic monthly pre-release rules and storage targets are set up for individual reservoirs; however, those releases are updated annually for inter-annual variability (dry or wet year) and daily for environmental constraints such as flow minimum release and minimum/maximum storage levels. The WM model allows an evaluation of the impact of water management over multiple river basins at once (global, continental scales) and with consistent representation of human operations over the full domain.

97 MATHEMATICS AND COMPUTING↗

Quantifying the Contributions of Aerosol- and Snow-Produced ClNO 2 through Observations and 1D Modeling

Nitryl chloride (ClNO 2 ) is a radical reservoir that forms and accumulates in the nocturnal atmospheric boundary layer influenced by combustion emissions and chloride (e.g., sea salt and road salt). Upon sunrise, ClNO 2 rapidly photolyzes to generate highly reactive chlorine radicals (Cl • ) that affect the air quality by generating secondary air pollutants. Recent studies have shown road salt aerosols and saline snowpack to be sources of ClNO 2 in the wintertime urban environment; however, the quantitative contributions of each chloride source are not known. In this study, we examine the vertically resolved contributions of aerosol particles and saline snowpack as sources of ClNO 2 by using an observationally constrained snow–atmosphere coupled one-dimensional model applied to wintertime Kalamazoo, Michigan, U.S. Model simulations show that ClNO 2 emitted from urban snowpack can be vertically transported throughout the entire atmospheric boundary layer and can be a significant source of ClNO 2 , contributing up to ~60% of the ClNO 2 budget near the surface. Here, modeled snowpack ClNO 2 emission rates were 6 (±7) times higher than the observationally derived emission rates, suggesting that not all snow chloride is available for reaction. ClNO 2 production from both aerosol particles and snow emissions are required to best simulate the observed surface-level ClNO 2 . Using the traditional bulk parameterization for ClNO 2 produced from particles significantly overestimated ClNO 2 due to the assumption of having equivalent dinitrogen pentoxide (N 2 O 5 ) uptake and chloride availability for the entire particle population. In comparison, the chemically resolved surface area-based parameterization slightly underestimated the observations and had uncertainties deriving from ClNO 2 production from residential wood burning particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling shear failure and permeability enhancement due to coupled Thermal-Hydrological-Mechanical processes in Enhanced Geothermal Reservoirs

The connectivity and accessible surface area of flowing fractures, whether natural or man-made, is possibly the single most important factor, after temperature, which determines the feasibility of an Enhanced Geothermal System (EGS). Rock deformation and in-situ stress changes induced by injected fluids can lead to shear failure on preexisting fractures which can generate microseismic events, and also enhance the permeability and accessible surface area of the geothermal formation. Hence, the ability to accurately model the coupled thermal-hydrologic-mechanical (THM) processes in fractured geological formations is critical in effective EGS reservoir development and management strategies. The locations of the microseismic events can serve as indicators of the zones of enhanced permeability, thus providing vital information for verification of the coupled THM models. We will describe a general purpose computational code, FEHM, developed for this purpose, that models coupled THM processes during multiphase fluid flow and transport in fractured porous media. The code incorporates several models of fracture aperture and stress behavior combined with permeability relationships. We provide field scale examples of applications to geothermal systems to demonstrate the utility of the method.

APERTURES↗

Multiporosity flow in fractured low-permeability rocks: Extension to shale hydrocarbon reservoirs

We presented a multiporosity extension of classical double and triple-porosity fractured rock flow models for slightly compressible fluids. The multiporosity model is an adaptation of the multirate solute transport model of Haggerty and Gorelick (1995) to viscous flow in fractured rock reservoirs. It is a generalization of both pseudo steady state and transient interporosity flow double-porosity models. The model includes a fracture continuum and an overlapping distribution of multiple rock matrix continua, whose fracture-matrix exchange coefficients are specified through a discrete probability mass function. Semianalytical cylindrically symmetric solutions to the multiporosity mathematical model are developed using the Laplace transform to illustrate its behavior. Furthermore, the multiporosity model presented here is conceptually simple, yet flexible enough to simulate common conceptualizations of double and triple-porosity flow. This combination of generality and simplicity makes the multiporosity model a good choice for flow modelling in low-permeability fractured rocks.

58 GEOSCIENCES↗

A coupled thermo-hydro-mechanical model for simulating leakoff-dominated hydraulic fracturing with application to geologic carbon storage

A potential risk of injecting CO2 into storage reservoirs with marginal permeability (≲ 10 mD (1 mD = 10 –15 m 2 )) is that commercial injection rates could induce fracturing of the reservoir and/or the caprock. Such fracturing is essentially fluid-driven fracturing in the leakoff-dominated regime. Recent studies suggested that fracturing, if contained within the lower portion of the caprock complex, could substantially improve the injectivity without compromising the overall seal integrity. Modeling this phenomenon entails complex coupled interactions among the fluids, the fracture, the reservoir, and the caprock. Here, we develop a simple method to capture all these interplays in high fidelity by sequentially coupling a hydraulic fracturing module with a coupled thermal-hydrological-mechanical (THM) model for nonisothermal multiphase flow. The model was made numerically tractable by taking advantage of self-stabilizing features of leakoff-dominated fracturing. The model is validated against the PKN solution in the leakoff-dominated regime. Moreover, we employ the model to study thermo-poromechanical responses of a fluid-driven fracture in a field-scale carbon storage reservoir that is loosely based on the In Salah project's Krechba reservoir. The model reveals complex yet intriguing behaviors of the reservoir-caprock-fluid system with fracturing induced by cold CO 2 injection. We also study the effects of the in situ stress contrast between the reservoir and caprock and thermal contraction on the vertical containment of the fracture. The proposed model proves effective in simulating practical problems on length and time scales relevant to geological carbon storage.

58 GEOSCIENCES↗

Role of interaction between hydraulic and natural fractures on production

One of the main purposes of hydraulic fracturing in unconventional resources such as shale is to improve the connectivity between existing natural fractures and the production well. Since the inherent permeability of shale is extremely low, this newly formed fracture connectivity provides faster paths for the hydrocarbon stored in preexisting natural fractures. In this study, we performed numerical simulations of the free gas production at large scale fractured reservoir with different pre-existing natural fracture network intensities and with variable hydraulic fracture sizes and staging. We explored production characteristics as a function of the properties of both, natural fractures (intensity) and hydraulic fractures (size and staging). Our hypothesis is that once maximum fracture connectivity is achieved, additional stimulation does not increase production significantly. In this numerical study we use an advanced modeling tool to study fractures connectivity, Discrete Fracture Network (DFN) approach, which can represent fracture networks similar to those observed on individual reservoir sites. In our model the horizontal production well and vertical hydraulic fractures were deterministically defined and surrounded by stochastically generated natural fracture networks. The performed numerical experiments show how fracture connectivity depends on hydraulic fracture settings in fractured reservoir with different preexisting fracture densities. We numerically showed that cumulative free gas production is not affected significantly by hydraulic fractures size (25 m–150 m) or spacing (15 m–45 m) for dense natural fracture networks. However, the hydraulic fracture size is important in reservoirs with sparse natural fractures, although spacing (number of stages) does not play a significant role.

58 GEOSCIENCES↗

Photochemical partitioning of the reactive nitrogen and chlorine reservoirs in the high-latitude stratosphere

The correlated set of measurements in the lower stratosphere from polar missions of the NASA ER-2 is used to derive partitioning of the major components of the reactive nitrogen and inorganic chlorine reservoirs. The results provide a consistent method for comparing distributions, and hence the controlling processes, between different areas of the near-polar regions. Clear evidence of the effects of heterogeneous processes in the atmosphere is found. Values for NO2, ClONO2, N2O5, and Cl2O2 are derived in a simplified steady-state model based on in situ NO, ClO, O3, temperature, and pressure measurements, laboratory-measured reaction rates; and modeled photodissociation rates. Values for the reservoir totals are independently derived from measurements of N2O, organic chlorine, and total reactive nitrogen. The relative abundances of the measured and derived species within the reservoirs are calculated, and the longer-lived species HCl and HNO3 are estimated as the residuals of their respective reservoirs.

Kawa, S. R.↗

Introducing GEOPHIRES v2.0: Updated Geothermal Techno-Economic Simulation Tool: Preprint

This paper presents an updated version of the geothermal techno-economic simulation tool GEOPHIRES (GEOthermal Energy for Production of Heat and electricity (IR) Economically Simulated). GEOPHIRES combines reservoir, wellbore, surface plant and economic models to estimate the capital, and operation and maintenance costs, lifetime energy production, and overall levelized cost of energy of a geothermal plant. The available end-use options are electricity, direct-use heat and cogeneration. The main updates in the new version include conversion of the source code from FORTRAN to Python, the option to couple to an external reservoir simulator, updated cost correlations, and more flexibility in selecting the time step and number of injection and production wells. An overview of all the updates and two case-studies to illustrate the tool's new capabilities are provided in this paper.

15 GEOTHERMAL ENERGY↗

Optimization of operational strategies for rich gas enhanced oil recovery based on a pilot test in the Bakken tight oil reservoir

Horizontal well drilling and multistage hydraulic fracturing have been demonstrated as effective approaches for stimulating oil production in the Bakken tight oil reservoir. However, after multiple years of production, primary oil recovery in the Bakken is generally less than 10% of the estimated original oil in place. Gas huff ‘n’ puff (HnP) has been tested in the Bakken Formation as an enhanced oil recovery (EOR) method; however, most field pilot test results showed no significant incremental oil production. One of the factors affecting HnP EOR performance is premature gas breakthrough, which is one of the most critical issues observed in the field because of the presence of interwell fractures. Consequently, injected gas rapidly reaches adjacent production wells without contacting reservoir rock and increasing oil recovery. Proper conformance control is therefore needed to avoid early gas breakthrough and improve EOR performance. In this study, a rich gas EOR pilot in the Bakken was carefully analyzed to collect the essential reservoir and operational data. A simulation model with 16 wells was then developed to reproduce the production history and predict the EOR performance with and without conformance control. EOR operational strategies, including single- and multiple-well HnP, with different gas injection constraints were investigated. The simulation results of single-well HnP without conformance control showed that a rich gas injection rate of at least 10 MMscfd was needed to yield meaningful incremental oil production. The strategy of conformance control via water injection could significantly improve oil production in the HnP well, but injecting an excessive amount of water also leads to water breakthrough and loss of oil production in the offset wells. By analyzing the production performance of the wells individually, the arrangement of wells was optimized for multiple-well HnP EOR. The multiwell results showed that rich gas EOR could improve oil production up to 7.4% by employing conformance control strategies. Furthermore, replacing rich gas with propane as the injection gas could result in 14% of incremental oil production.

02 PETROLEUM↗

Recovery Act: An Integrated Experimental and Numerical Study: Developing a Reaction Transport Model that Couples Chemical Reactions of Mineral Dissolution/Precipitation with Spatial and Temporal Flow Variations.

A total of 12 publications and 23 abstracts were produced as a result of this study. In particular, the compilation of a thermodynamic database utilizing consistent, current thermodynamic data is a major step toward accurately modeling multi-phase fluid interactions with solids. Existing databases designed for aqueous fluids did not mesh well with existing solid phase databases. Addition of a second liquid phase (CO2) magnifies the inconsistencies between aqueous and solid thermodynamic databases. Overall, the combination of high temperature and pressure lab studies (task 1), using a purpose built apparatus, and solid characterization (task 2), using XRCT and more developed technologies, allowed observation of dissolution and precipitation processes under CO2 reservoir conditions. These observations were combined with results from PIV experiments on multi-phase fluids (task 3) in typical flow path geometries. The results of the tasks 1, 2, and 3 were compiled and integrated into numerical models utilizing Lattice-Boltzmann simulations (task 4) to realistically model the physical processes and were ultimately folded into TOUGH2 code for reservoir scale modeling (task 5). Compilation of the thermodynamic database assisted comparisons to PIV experiments (Task 3) and greatly improved Lattice Boltzmann (Task 4) and TOUGH2 simulations (Task 5). PIV (Task 3) and experimental apparatus (Task 1) have identified problem areas in TOUGHREACT code. Additional lab experiments and coding work has been integrated into an improved numerical modeling code.

15 GEOTHERMAL ENERGY↗

Computing with a Chemical Reservoir

Contemporary computation is expensive, with large language models and artificial intelligence becoming more common in daily life. However, high-performance computing is reaching the limits in speed and energy expenditure, and domain science requires ever-increasing computational capacity, with simulations and data analysis pipelines ever-growing in complexity. As we progress towards post-exascale computation, with the associated high energy costs, new methods of energy-conscious computation are required. Novel analog and hybrid digital-analog systems can overcome these challenges, and chemical reactions offer a promising avenue. Computers based on chemistry can provide compact desktop devices with immense computational power. These devices are readily scalable by considering greater reaction systems or vessels, meeting the high-performance requirements for scientific workflows. In this article, we present ChemComp, a compilation pipeline for the conversion of ordinary differential equations into implementable chemical reactions. We then demonstrate the solving capabilities of ChemComp by emulating a potential chemical reservoir device. We leverage the multi-layer intermediate representation (MLIR) compiler framework to implement an expressive chemical reaction abstraction and propose a path for chemical reaction networks (CRNs) to represent mathematical problems effectively. Combined, we demonstrate a potential workflow that can harness chemistry’s computing power to create energy-efficient, high-performance computation systems for contemporary computing needs.

artificial intelligence↗

Model representations of kerogen structures: An insight from density functional theory calculations and spectroscopic measurements

Molecular structures of kerogen control hydrocarbon production in unconventional reservoirs. Significant progress has been made in developing model representations of various kerogen structures. These models have been widely used for the prediction of gas adsorption and migration in shale matrix. However, using density functional perturbation theory (DFPT) calculations and vibrational spectroscopic measurements, we here show that a large gap may still remain between the existing model representations and actual kerogen structures, therefore calling for new model development. Using DFPT, we calculated Fourier transform infrared (FTIR) spectra for six most widely used kerogen structure models. The computed spectra were then systematically compared to the FTIR absorption spectra collected for kerogen samples isolated from Mancos, Woodford and Marcellus formations representing a wide range of kerogen origin and maturation conditions. Limited agreement between the model predictions and the measurements highlights that the existing kerogen models may still miss some key features in structural representation. A combination of DFPT calculations with spectroscopic measurements may provide a useful diagnostic tool for assessing the adequacy of a proposed structural model as well as for future model development. This approach may eventually help develop comprehensive infrared (IR)-fingerprints for tracing kerogen evolution.

03 NATURAL GAS↗

Unveiling the Potential of MeshGraphNets for Predicting Subsurface Evolution in Carbon Storage Projects

This is the conference paper accompanying an oral presentation “Unveiling the Potential of MeshGraphNets for Predicting Subsurface Evolution in Carbon Storage Projects” at the 17th International Conference on Greenhouse Gas Control Technologies GHGT-17 held in Calgary, Canada, October 20-24 , 2024. Carbon capture and storage (CCS) technology is critical for mitigating climate change but requires effective subsurface reservoir management to ensure safe containment of injected CO2. Accurate predictions of reservoir pressure and saturation are essential for assessing long-term CCS performance. Traditional numerical simulations, while effective, are computationally intensive, time-consuming, and constrained by data discretization. Previous work has shown the effectiveness of MeshGraphNets (MGN), a graph-based machine learning framework, as an innovative alternative for predicting reservoir behavior. MGN leverages graph neural networks (GNNs) and mesh representations to model complex geological formations, offering superior adaptability across different discretizations and reservoir configurations. Classic MGN implementations utilize an autoregressive technique to predict future behavior based on current predictions, but this technique is hampered by error accumulation over time. To enhance the model accuracy in time-series predictions, this study implemented a multi-step rollout strategy that integrates autoregressive predictions during training to stabilize prediction of saturation over time. Using the Illinois Basin – Decatur Project (IBDP) dataset, comprising 100 simulations of CO2 injection, pressure, and saturation changes, the framework demonstrated its ability to learn spatial dependencies and temporal dynamics. With inputs including permeabilities, porosities, and injection rates, MGN accurately predicted CO2 plume evolution over time, even with limited training data. Moreover, the addition of a multi-step rollout procedure during training improved the ability of MGN to predict stably over time by ~15%. This research positions MGN, enhanced with multi-step rollout capabilities, as a robust and efficient tool for CCS applications. It advances the field by enabling precise, computationally efficient predictions of reservoir behavior, providing a foundation for the broader adoption of machine learning frameworks in CCS and other geoscience domains.

Holcomb, Paul↗

Alabama Carbon Storage: Data Sharing and Engagement (Final Report)

This report is the final technical report on Alabama Carbon Storage: Data Sharing Engagement (ACS:DSE) project activities. The goals of the ACS:DSE project are to compile geologic, geophysical, infrastructure, and other relevant CCUS datasets for the study area and develop a geologic model of the study area; develop an online platform to serve data to stakeholders; engage with the public, students, and industry to educate them about CCUS and the data platform; and ensure energy and environmental justice is central to all aspects of the project. Datasets compiled and expanded include formation depths and elevations, digital geophysical well logs, reservoir properties, geologic structures, and geologic models. The geologic data were used to create a three-dimensional geologic model, structure grids, structure contour maps, and fault trace maps. In addition to downloadable datasets, links to CCUS relevant regulatory agencies (e.g., OGB, U.S. Environmental Protection Agency) and sources for infrastructure and educational information were included on the website Educational materials on CCUS for use by K-12 teachers were produced as part of the ACS:DSE project.

01 COAL, LIGNITE, AND PEAT↗

Relative Permeabilities: a pore-level model study of the capillary number dependence

Relative permeabilities are widely used by the petroleum industry in reservoir simulations of recovery strategies. In recent years, pore level modeling has been used to determine relative permeabilities at zero capillary number for a variety of more and more realistic model porous media. Unfortunately, these studies cannot address the issue of the observed capillary number dependence of the relative permeabilities. Several years ago, we presented a method for determining the relative permeabilities from pore-level modeling at general capillary number. We have used this method to determine the relative permeabilities at several capillary numbers and stable viscosity ratios. In addition, we have determined these relative permeabilities using one of the standard dynamic methods for determining relative permeabilities from core flood experiments. Our results from the two methods are compared with each other and with experimental results.

02 PETROLEUM↗

3-Dimensional Geologic Modeling Applied to the Structural Characterization of Geothermal Systems: Astor Pass, Nevada, USA

Geothermal systems in the Great Basin, USA, are controlled by a variety of fault intersection and fault interaction areas. Understanding the specific geometry of the structures most conducive to broad-scale geothermal circulation is crucial to both the mitigation of the costs of geothermal exploration (especially drilling) and to the identification of geothermal systems that have no surface expression (blind systems). 3-dimensional geologic modeling is a tool that can elucidate the specific stratigraphic intervals and structural geometries that host geothermal reservoirs. Astor Pass, NV USA lies just beyond the northern extent of the dextral Pyramid Lake fault zone near the boundary between two distinct structural domains, the Walker Lane and the Basin and Range, and exhibits characteristics of each setting. Both northwest-striking, left-stepping dextral faults of the Walker Lane and kinematically linked northerly striking normal faults associated with the Basin and Range are present. Previous studies at Astor Pass identified a blind geothermal system controlled by the intersection of west-northwest and north-northwest striking dextral-normal faults. Wells drilled into the southwestern quadrant of the fault intersection yielded 94°C fluids, with geothermometers suggesting a maximum reservoir temperature of 130°C. A 3-dimensional model was constructed based on detailed geologic maps and cross-sections, 2-dimensional seismic data, and petrologic analysis of the cuttings from three wells in order to further constrain the structural setting. The model reveals the specific geometry of the fault interaction area at a level of detail beyond what geologic maps and cross-sections can provide.

15 GEOTHERMAL ENERGY↗

Isotopic relationships among the shergottites, the nakhlites and Chassigny

A model-based argument is made that there is a plausible relationship between the shergottites and the other SNCs which implies that the former contain an igneous component that is both young and mantle-derived. Evidence is presented that the shergottites were derived from a common mantle source within a short time interval and then interacted with other isotopic reservoirs prior to their crystallization. The model implies in general that the initial isotopic signatures of the bulk shergottites may be approximated as a mixing among three described components.

Jones, J. H.↗