Search NASA⌕ Search

SEARCH · Search NASA

Results for “Support effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Effect of Cold Rolling and Heat Treatment on Microstructure and Mechanical Properties of Ti-4Al-1Mn Titanium Alloy

Mechanical behavior of Ti-4Al-1Mn titanium alloy has been studied in annealed, cold-rolled and heat-treated conditions. Room temperature tensile strength as well as % elongation has been found to be low with increasing amount of cold rolling. Lowering of strength in cold worked condition is attributed to premature failure. However, the same has been mitigated after heat treatment. Significant effect of cooling media (air and water) from heat treatment temperature on microstructure was not found except for the degree of fineness of α plates. Optimum properties (strength as well as ductility) were exhibited by samples subjected to 15% cold rolling and heat treatment below β transus temperature, which can be attributed to presence of recrystallized microstructure. In cold worked condition, the microstructure shows fine fragmented α plates/Widmanstätten morphology with high dislocation density along with a large amount of strain fields and twinning, which gets transformed to recrystallized equiaxed microstructure and with plate-like morphology after near β heat treatment. Prior cold work is found to have a significant effect on mechanical properties supported by evolution of microstructure. Twinning is found to be assisting in deformation as well as in recrystallization through the formation of deformation and annealing twins during cold working and heat treatment. Fracture analysis of the tested sample with prior cold work and heat-treated condition revealed quasi-ductile failure as compared to only ductile failure features seen for samples heat treated without prior cold work.

36 MATERIALS SCIENCE↗

Investigation on Mechanical Properties and Equivalent Model of Aluminum Honeycomb Sandwich Panels

In this study, positive-pressure, bending, and drum peel tests were carried out for aluminum honeycomb sandwich panels made of different materials and with different dimensions. The results of these tests not only precisely revealed the relationships between the mechanical properties of aluminum honeycomb sandwich panels and the material dimensions of the face and core layers, the layout mode of the core layer, and the connecting mode between the face layers and core layers, but also determined the reliable mechanical equivalent model. The test results indicate that when the specimen was subjected to the vertical load, the compression properties of aluminum honeycomb sandwich panels were mainly determined by its core layer, while the face layer mainly relieves the axial stress and restrains the deformation of the core layer. In the flexural test, the face layer is the main part subjected to the load, whereas the core layer shows supporting, stabilizing, and strengthening effects, slowing the deformation of the face layer; flexural-tensile properties can be somewhat affected by the layout type of the core layer. The equivalent plate model, honeycomb plate model, and sandwich panel model were screened based on the experimental results, indicating that the sandwich panel model provided a more accurate description. The sandwich panel model was further modified, ultimately resulting in a more effective equivalent model that can accurately reflect the mechanical properties of the aluminum honeycomb sandwich panels.

36 MATERIALS SCIENCE↗

Machine learning prediction and experimental verification of Pt-modified nitride catalysts for ethanol reforming with reduced precious metal loading

Ethanol is the smallest molecule containing C–O, C–C, C–H, and O–H bonds present in biomass-derived oxygenates. The development of inexpensive and selective catalysts for ethanol reforming is important towards the renewable generation of hydrogen from biomass. Transition metal nitrides (TMN) are interesting catalyst support materials that can effectively reduce precious metal loading for the catalysis of ethanol and other oxygenates. Herein theoretical and experimental methods were used to probe platinum-modified molybdenum nitride (Pt/Mo 2 N) surfaces for ethanol reforming. Computations using density-functional theory and machine learning predicted monolayer Pt/Mo 2 N to be highly active and selective for ethanol reforming. Temperature-programmed desorption (TPD) experiments verified that ethanol primarily underwent decomposition on Mo 2 N, and the reaction pathway shifted to reforming on Pt/Mo 2 N surfaces. Additionally, high-resolution electron energy loss spectroscopy (HREELS) results further indicated that while Mo2N decomposed the ethoxy intermediate by cleaving C–C, C–O, and C–H bonds, Pt-modification preserved the C–O bond, resulting in ethanol reforming.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dioscin inhibits osteoclast differentiation and bone resorption though down-regulating the Akt signaling cascades

Highlights: •A natural-derived compound, dioscin, suppresses osteoclast formation and bone resorption. •Dioscin inhibits osteolytic bone loss in vivo. •Dioscin impairs the Akt signaling cascades pathways during osteoclastogenesis. •Dioscin have therapeutic value in treating osteoclast-related diseases. -- Abstract: Bone resorption is the unique function of osteoclasts (OCs) and is critical for both bone homeostasis and pathologic bone diseases including osteoporosis, rheumatoid arthritis and tumor bone metastasis. Thus, searching for natural compounds that may suppress osteoclast formation and/or function is promising for the treatment of osteoclast-related diseases. In this study, we for the first time demonstrated that dioscin suppressed RANKL-mediated osteoclast differentiation and bone resorption in vitro in a dose-dependent manner. The suppressive effect of dioscin is supported by the reduced expression of osteoclast-specific markers. Further molecular analysis revealed that dioscin abrogated AKT phosphorylation, which subsequently impaired RANKL-induced nuclear factor-kappaB (NF-κB) signaling pathway and inhibited NFATc1 transcriptional activity. Moreover, in vivo studies further verified the bone protection activity of dioscin in osteolytic animal model. Together our data demonstrate that dioscin suppressed RANKL-induced osteoclast formation and function through Akt signaling cascades. Therefore, dioscin is a potential natural agent for the treatment of osteoclast-related diseases.

60 APPLIED LIFE SCIENCES↗

N-3 polyunsaturated fatty acids ameliorate hepatic steatosis via the PPAR-α/CPT-1α pathway in a mouse model of parenteral nutrition

Parenteral nutrition (PN) is one of the basic therapies for patients with intestinal failure; however, hepatic steatosis associated with PN limits the long-term use of PN. N-3 polyunsaturated fatty acids (PUFAs) have been used to improve clinical outcomes of patients receiving PN; however, the mechanisms by which n-3 PUFAs ameliorate hepatic steatosis remain unclear. In the present study, C57BL/6J mice were randomly assigned to three treatment groups, namely, enteral nutrition (EN), n-3 PUFAs, and n-6 PUFAs. Additionally, MK 886 was used to inhibit PPAR-α. After 7 days of intervention, mice were sacrificed, and liver tissue and serum samples were collected. Results from liver weight and liver triglyceride measurements and Oil Red O staining showed that n-3 PUFAs significantly reduced the liver triglyceride levels. In addition, treatment with n-3 PUFAs resulted in a greater decrease in serum triglyceride and low-density lipoprotein cholesterol levels compared to n-6 PUFAs. The key enzymes involved in FA oxidation, namely, PPAR-α and CPT-1α, were significantly restored at both the mRNA and protein levels in the n-3 PUFAs group. However, the benefits of n-3 PUFAs in improving serum and liver TG levels were abolished when the PPAR-α/CPT-1α pathway was blocked by MK 886. The results of this study indicated that n-3 PUFAs ameliorated the PN-associated hepatic steatosis by activating the PPAR-α/CPT-1α pathway. The present study provided a reliable scientific basis supporting the potential benecial effects of n-3 PUFAs for improving hepatic steatosis in patients receiving long-term parenteral nutrition.

60 APPLIED LIFE SCIENCES↗

On the competitive antagonism effect in combined chloride-sulfate attack: A numerical exploration

Highlights: • A chemo-physical-mechanical method based on thermodynamic modelling is implemented. • The contradicting findings from reported experiments are numerically explored. • The competitive antagonism effect is time-dependent rather than a conclusive term. • The competitive antagonism effect is quantifiable with a novel assessment criterion. It is of tremendous difficulty to draw a conclusive verdict on the complex process of mutual interference regarding the combined chloride-sulfate attack on concrete, where many have explored the topic, but contradicting results have been reported. In this paper, by taking advantages of the chemo-physical-mechanical method, based on the robust technique of thermodynamic modelling, the competitive antagonism effect in combined chloride-sulfate attack is investigated. Firstly, a range of reported tests are numerically modelled to demonstrate the effectiveness of the employed method in interpreting those opposing and diverse experimental outcomes. More importantly, a fresh conjecture incorporating a novel assessment criterion for the competitive antagonism effect is proposed and supported through a carefully designed illustrative example. Based on the numerical exploration, unique findings and implications for future engineering practices are revealed.

36 MATERIALS SCIENCE↗

Taxonomy of USA east coast fishing communities in terms of social vulnerability and resilience

Increased concern with the impacts that changing coastal environments can have on coastal fishing communities led to a recent effort by NOAA Fisheries social scientists to develop a set of indicators of social vulnerability and resilience for the U.S. Southeast and Northeast coastal communities. A goal of the NOAA Fisheries social vulnerability and resilience indicator program is to support time and cost effective use of readily available data in furtherance of both social impact assessments of proposed changes to fishery management regulations and climate change adaptation planning. The use of the indicators to predict the response to change in coastal communities would be enhanced if community level analyses could be grouped effectively. This study examines the usefulness of combining 1130 communities into 35 relevant subgroups by comparing results of a numerical taxonomy with data collected by interview methods, a process herein referred to as “ground-truthing.” The validation of the taxonomic method by the method of ground-truthing indicates that the clusters are adequate to be used to select communities for in-depth research. - Highlights: • We develop a taxonomy of fishing communities based on vulnerability indicators. • We validate the community clusters through the use of surveys (“ground-truthing”). • Clusters differ along important aspects of fishing community vulnerability. • Clustering communities allows for accurate and timely social impact assessments.

54 ENVIRONMENTAL SCIENCES↗

Predicting the Effect of Accelerated Fractionation in Postoperative Radiotherapy for Head and Neck Cancer Based on Molecular Marker Profiles: Data From a Randomized Clinical Trial

Purpose: To determine the prognostic and predictive values of molecular marker expression profiles based on data from a randomized clinical trial of postoperative conventional fractionation (p-CF) therapy versus 7-day-per-week postoperative continuous accelerated irradiation (p-CAIR) therapy for squamous cell cancer of the head and neck. Methods and Materials: Tumor samples from 148 patients (72 p-CF and 76 p-CAIR patients) were available for molecular studies. Immunohistochemistry was used to assess levels of EGFR, nm23, Ki-67, p-53, and cyclin D1 expression. To evaluate the effect of fractionation relative to the expression profiles, data for locoregional tumor control (LRC) were analyzed using the Cox proportional hazard regression model. Survival curves were compared using the Cox f test. Results: Patients who had tumors with low Ki-67, low p-53, and high EGFR expression levels and oral cavity/oropharyngeal primary cancer sites tended to benefit from p-CAIR. A joint score for the gain in LRC from p-CAIR based of these features was used to separate the patients into two groups: those who benefited significantly from p-CAIR with respect to LRC (n = 49 patients; 5-year LRC of 28% vs. 68%; p = 0.01) and those who did not benefit from p-CAIR (n = 99 patients; 5-year LRC of 72% vs. 66%; p = 0.38). The nm23 expression level appeared useful as a prognostic factor but not as a predictor of fractionation effect. Conclusions: These results support the studies that demonstrate the potential of molecular profiles to predict the benefit from accelerated radiotherapy. The molecular profile that favored accelerated treatment (low Ki-67, low p-53, and high EGFR expression) was in a good accordance with results provided by other investigators. Combining individual predictors in a joint score may improve their predictive potential.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Propanal synthesis from aqueous propylene glycol/hydrogen peroxide on a Ru/alumina catalyst

The conversion of polyol materials, including 1,2-diols, into higher commodity chemicals is actively being pursued by many researchers. Here we report the production of propanal from propylene glycol and hydrogen peroxide using a Ru/alumina catalyst. Experiments were conducted by adding up to four peroxide equivalents under steady-state reflux conditions at 371 K. The product propanal and its subsequent reaction product with substrate, 1,3-dioxolane-2-ethyl-4-methyl, was observed to be an intermediate achieving a maximum concentration of 3% of substrate. Buffering using Mg(OH)2 at pH~10 resulted in propanal formation, whereas buffering at similar pH using Na2HSO4 did not, from which we propose that magnesium acts as a promoter in the reaction. The mechanism appears to be a dehydration to enol, followed by rearrangement to product. Experiments utilizing Ru/carbon did not yield any propanol suggesting that the acidic sites of alumina aid the dehydration reaction. To our knowledge, this represents the first time hydrogen peroxide has been used in an alcohol dehydration reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidative dehydrogenation (ODH) of ethane with O[subscript 2] as oxidant on selected transition metal-loaded zeolites

Ni-, Cu-, and Fe-loaded acidic and basic Y zeolites were synthesized, and their catalytic properties for oxidative dehydrogenation of ethane (ODHE) to ethylene were characterized. Acidic Ni-loaded Y zeolite exhibits an ethylene productivity of up to 108 g{sub C{sub 2}H{sub 4}}g{sub cat}{sup -1} h{sup -1} with a selectivity of {approx}75%. Acidic Cu- and Fe-loaded Y zeolites have an ethylene productivity of up to 0.37 g{sub C{sub 2}H{sub 4}}g{sub cat}{sup -1} h{sup -1} and a selectivity of {approx}50%. For the same metal, the acidity of the zeolite favors both ODHE productivity and ethylene selectivity. Extended X-ray absorption fine structure (EXAFS) studies show that Ni, present in particles on Ni/HY during the ODHE catalytic process, contains both Ni-Ni and Ni-O bonds, and that the ratio of oxidized Ni versus metallic Ni increases with the temperature. The insights these studies provide into the ODHE reaction mechanism are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Neural chaos: A spectral stochastic neural operator

Building surrogate models for operators with uncertainty quantification capabilities is essential for many engineering applications where randomness–such as variability in material properties, boundary conditions, and initial conditions–is unavoidable. Polynomial Chaos Expansion (PCE) is widely recognized as a go-to method for constructing stochastic surrogates in both intrusive and non-intrusive ways, and it has recently been used in the context of operator learning. However, its application becomes challenging for complex or high-dimensional processes, as achieving accuracy requires higher-order polynomials, which can increase computational demand and/or the risk of overfitting. Furthermore, PCE requires specialized treatments to manage random variables that are not independent, and these treatments may be problem-dependent or may fail with increasing complexity. Here, in this work, we adopt the same formalism as the spectral expansion used in PCE; however, we replace the classical polynomial basis functions with neural network (NN) basis functions to leverage their expressivity. To achieve this, we propose an algorithm that identifies NN-parameterized basis functions in a purely data-driven manner, without any prior assumptions about the joint distribution of the random variables involved, whether independent or dependent, or about their marginal distributions. The proposed algorithm identifies each NN-parameterized basis function sequentially, ensuring they are orthogonal with respect to the data distribution. The basis functions are constructed directly on the joint stochastic variables without requiring a tensor product structure or assuming independence of the random variables. This approach may offer greater flexibility for complex stochastic models, while simplifying implementation compared to the tensor product structures typically used in PCE to handle random vectors. This is particularly advantageous given the current state of open-source packages, where building and training neural networks can be done with just a few lines of code and extensive community support. We demonstrate the effectiveness of the proposed scheme through several numerical examples of varying complexity and provide comparisons with classical PCE.

Polynomial chaos expansion↗

Synthesis, Characterization, and Catalytic Oxygen Electroreduction Activities of Carbon-Supported PtW Nanoparticle Catalysts

Carbon-supported PtW (PtW/C) alloy nanoparticle catalysts with well-controlled particle size, dispersion, and composition uniformity, have been synthesized by wet chemical methods of decomposition of carbonyl cluster complexes, hydrolysis of metal salts, and chemical reactions within a reverse microemulsion. The synthesized PtW/C catalysts were characterized by X-ray diffraction, high-resolution transmission electron microscopy, and energy-dispersive spectroscopy. The catalytic oxygen electroreduction activities were measured by the hydrodynamic rotating disk electrode technique in an acidic electrolyte. The influence of the synthesis method on PtW particle size, size distribution, composition uniformity, and catalytic oxygen electroreduction activity, have been investigated. Among the synthesis methods studied, PtW/C catalysts prepared by the decomposition of carbonyl cluster complexes displayed the best platinum mass activity for oxygen reduction reaction under the current small scale production; a 3.4-fold catalytic enhancement was achieved in comparison to a benchmark Pt/C standard.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polyacrylamide-hydroxyapatite composite: Preparation, characterization and adsorptive features for uranium and thorium

The composite of synthetically produced hydroxyapatite (HAP) and polyacrylamide was prepared (PAAm-HAP) and characterized by BET, FT-IR, TGA, XRD, SEM and PZC analysis. The adsorptive features of HAP and PAAm-HAP were compared for UO{sub 2}{sup 2+} and Th{sup 4+}. The entrapment of HAP into PAAm-HAP did not change the structure of HAP. Both structures had high affinity to the studied ions. The adsorption capacity of PAAm-HAP was than that of HAP. The adsorption dependence on pH and ionic intensity provided supportive evidences for the effect of complex formation on adsorption process. The adsorption kinetics was well compatible to pseudo second order model. The values of enthalpy and entropy changes were positive. Th{sup 4+} adsorption from the leachate obtained from a regional fluorite rock confirmed the selectivity of PAAm-HAP for this ion. In consequence, PAAm-HAP should be considered amongst favorite adsorbents for especially deposition of nuclear waste containing U and Th, and radionuclide at secular equilibrium with these elements. - Graphical abstract: SEM images of hydroxyapatite (HAP) and polyacrylamide-hydroxyapatite (PAAm-HAP), and the adsorption isotherms for Uranium and Thorium. Highlights: Black-Right-Pointing-Pointer Composite of PAAm-HAP was synthesized from hydroxyapatite and polyacrylamide. Black-Right-Pointing-Pointer The materials were characterized by BET, FT-IR, XRD, SEM, TGA and PZC analysis. Black-Right-Pointing-Pointer HAP and PAAm-HAP had high sorption capacity and very rapid uptake for UO{sub 2}{sup 2+} and Th{sup 4+}. Black-Right-Pointing-Pointer Super porous PAAm was obtained from PAAm-HAP after its removal of HAP content. Black-Right-Pointing-Pointer The composite is potential for deposition of U, Th and its associate radionuclides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-situ packaging ultra-uniform 3D hematite nanotubes by polyaniline and their improved gas sensing properties

Highlights: • Ultra-uniform 3D α-Fe{sub 2}O{sub 3} nanotubes were packaged by PANI through the two-stage solution processes. • PANI/α-Fe{sub 2}O{sub 3}-based sensor could detect low concentration of acetone (1 ppm) at lower temperature of 180 °C. • The unique structure of α-Fe{sub 2}O{sub 3} support and its synergetic effect with PANI layers improved the sensor performances. - Abstract: This paper reports the PANI (polyaniline)-packaged three-dimensional (3D) α-Fe{sub 2}O{sub 3} nanotubes P/N heterojunction, which was constructed successfully though a facile hydrothermal reaction without adding any surfactant followed by in-situ chemical polymerization in the liquid phase. The structure and morphology of the products were characterized by means of FESEM, XRD, TEM & HRTEM, TGA and FT-IR. Gas sensing test results found that, the PANI/α-Fe{sub 2}O{sub 3} nanocomposite sensor exhibited obviously higher response, lower working temperature (180 °C), fast response and recovery speeds, good selectivity and excellent stability to acetone gas, indicating its promising application for high-performance acetone sensors. The enhanced gas sensing performances can be attributed to the factors like ultra-uniform 3D nanotube-like structure for α-Fe{sub 2}O{sub 3}, the noticeable advantages of PANI, as well as the construction of heterojunction barrier at their interface. The as-prepared PANI/α-Fe{sub 2}O{sub 3} nanocomposite may be also applied in other areas like photocatalysis, water purification, ion batteries, optical devices, and so on.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Improved oxygen reduction reactivity of platinum monolayers on transition metal surfaces

The research described in this product was performed in part in the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. The catalytic activity of platinum monolayers supported on close-packed transition metal surfaces (Au(111), Pt(111), Pd(111) and Ir(111)) is investigated for the oxygen reduction reaction (ORR) by generating free energy diagrams and performing Sabatier analysis based on periodic, self-consistent density functional theory (DFT) calculations. Three different ORR mechanisms, involving direct or hydrogen assisted activation of O₂, are considered. At the ORR equilibrium potential of 1.23 V, the reactivity of all surfaces is shown to be limited by the rate of OH removal from the surface. At a cell potential of 0.80 V, the ORR reactivity of different surfaces is dictated by the strength of oxygen adsorption, with OH removal via hydrogenation and O–O bond scission in either O₂, O₂H or H₂O₂ being the rate-limiting steps for surfaces with stronger and weaker oxygen binding, respectively. Among the surfaces studied, Pt monolayer on a Pd(111) substrate shows the highest reactivity and is more active than Pt(111). These results are in excellent agreement with our earlier experimental and theoretical work, which was based on a simpler model for the ORR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methanethiol Chemistry on TiO2-Supported Ni Clusters

The thermal decomposition of methanethiol on Ni clusters grown on TiO2(1 1 0) was studied by temperature programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS) and low energy ion scattering (LEIS). On all of the Ni surfaces investigated, methane and hydrogen were observed as gaseous products in the TPD experiments, and the only sulfur-containing species that desorbed from the surface was methanethiol itself at low temperatures. The two pathways for methanethiol reaction were hydrodesulfurization to produce methane and nonselective decomposition, which leaves atomic carbon and sulfur on the surface. From high resolution XPS studies, methyl thiolate was identified as the surface intermediate for reaction on TiO2 and on all of the Ni surfaces investigated, similar to what is observed on single-crystal Ni surfaces. However, the binding sites for methyl thiolate on the 1 ML (monolayer) Ni clusters were different from those on the Ni clusters at coverages of 2.5 ML and higher, based on the S(2p) binding energies for methyl thiolate. No distinct changes in activity or selectivity were observed for the smaller Ni clusters grown at low coverage compared to the more film-like Ni surfaces other than what could be accounted for by changes in total surface area. Interactions between the Ni clusters and the TiO2 support had two main effects on chemical activity. First, carbon was oxidized by oxygen from the TiO2 lattice to produce CO at temperatures above 800 K. Second, annealing induced encapsulation of the Ni clusters by reduced TiOx and chemisorbed oxygen. At 800 K, the Ni clusters were totally encapsulated, resulting in a complete loss of methanethiol activity; partial encapsulation at 700 K caused a smaller decrease in activity accompanied by increased oxidation of carbon by lattice oxygen.

03 NATURAL GAS↗

Adsorption, charge transfer and a coverage-driven transition of alkali metals on rutile TiO 2 (110)

The interaction of alkali metals with metal oxide surfaces is central to tuning surface reactivity in heterogeneous catalysis and photocatalysis. Here we present a comprehensive DFT+U study of the adsorption of alkali metals (Li, Na, K, Rb, Cs) on the (110) surface of rutile TiO 2 . At low coverage (θ = 1/8), all alkali metals bind preferentially to bridging oxygen sites with adsorption energies in the range −4.06 to −3.33 eV, transferring nearly one full electron (0.92–0.99 |e|) to the substrate and inducing Ti 4+ → Ti 3+ reduction. The excess charge localizes preferentially at subsurface Ti sites in the form of small polarons. Diffusion barriers indicate facile motion along bridging-oxygen rows, whereas inter-row hopping is strongly hindered. Coverage effects were examined systematically for potassium: adsorption energy and charge transfer per K atom decrease monotonically with increasing θ. Strikingly, a sharp energy discontinuity occurs between θ = 4/8 and θ = 5/8 (ΔE ≈ 1 eV per atom), which we identify as a coverage-driven structural transition arising from steric packing constraints and enhanced K–K electrostatic repulsion once every (1×1) surface cell is occupied. This structural transition perfectly correlates with a dramatic drop in the work function down to an ultra-low minimum of 0.84 eV at θ=5/8, followed by a metallization- driven recovery at higher coverages. Ab initio molecular dynamics simulations confirm zigzag K arrangements at moderate coverage (θ = 1/3), while at high coverage (θ = 2/3) short-range K–K correlations emerge without long-range order. These results provide atomistic insight into the structure–activity relationships underlying alkali promotion effects on oxide-supported catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗